System Utilities Check failed while rapid installation

Hi All,
Following error is encountered while installing Oracle Applications 11.5.10
System Utilities Check
command : cmd.exe /c C:\Stage\Stage11i\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\Program Files\MKS Toolkit C:\VC
C:\Stage\Stage11i\startCD\Disk1\rapidwiz>echo off
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
C:\WINDOWS\system32/cc.exe
'cc' is available.
'link' is not available.
ERRORCODE = 1 ERRORCODE_END
RW-50011: Error: - System Utilities Availability test has returned an error: 1
what could be the reason ?
Regards,
Neeraj

Hi Andrew,
Thanks for the article.
Now I want to do fresh installation of MKS toolkit and all other stuff for sucessfull installation of Oracle Application.
But during the installation of mks toolkit, I am unable to specify the path for installation i.e., c:\MKS , it is saying that " An existing installation is detected. The install location cannot be changed."
But I have uninstall it through control panel->add and remove programs and manually cleaned all the physical files but still error encountered.
Please guide me how to proceed .
Regards,
Neeraj

Similar Messages

System Utilities Check - Error while installs OraApps on AIX

Hello Everyone ,
OS : AIX 5.3 TL12
Oracle Applications 11.5.10.2
while trying to install Oracle Applications on AIX everything passed the TEST / Checks except the following
[System Utilities Check] << faild with the following error message
System Utilities Check
These utilities need to be accessible on your system in order to do administrative tasks.
command : /Stage/Stage11i/startCD/Disk1/rapidwiz/bin/adchkutl.sh
Checking for make...     found - /usr/bin/make
Checking for ld...     found - /usr/bin/ld
Checking for cc...     found - /usr/vac/bin/cc
Checking for ar...     found - /usr/bin/ar
Checking for AIX 64-bit kernel extension for Oracle......
Found pw-syscall files and inittab entry on this system.
Note: you can also verify that the AIX 64bit kernel extension for
Oracle are loaded by running "/etc/loadext -r"as root:
Utility check completed successfully
System Utilities Availability test has succeeded
command : /Stage/Stage11i/startCD/Disk1/rapidwiz/bin/adaixchk.sh
AIX System Version found : 5.3
IBM VisualAge C++ v6.x or IBM XL C/C++ v7.x is required,
if you are installing any/all of the below products.
1. Discrete Manufacturing.
2. Advanced planning and Scheduling.
3. Transporation Planning.
RW-50011: Error: - IBM C++ utilities Availability test has returned an error: 1
i followed Oracle Installation guide for 11i and we have installed all the required packages and system prerequisites.
if any anyone has any solution , please share it with me
Best Regards,
Sam Jazz

xlC.adt.include 8.0.0.0 COMMITTED C Set ++ Application
xlC.aix50.rte 10.1.0.3 COMMITTED XL C/C++ Runtime for AIX 5.3
xlC.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.rte 10.1.0.3 COMMITTED XL C/C++ Runtime
xlC.rte 10.1.0.3 COMMITTED XL C/C++ Runtime
#which linkxlC
/usr/vacpp/bin/linkxlC

System architecture check failed while adding a New Node in RAC

Hi Friends,
Environment:SUN Solris 10
Cluster Version:10.2.0.3
database Version:10.2.0.3.0
Due to H/W failure one of our RAC node(prod1) got formatted.
We have deleted the node(prod1) from RAC successfully.
But When i am again trying to add the node and checking prerequistes i am facing the below issue.
$ cd /software/oracle/product/crs/bin
$ ./cluvfy stage -pre crsinst -n prod1,prod2
Check: System architecture
Node Name     Available                 Required                  Comment
prod2        unknown                   64-bit                    failed
prod1        64-bit                    64-bit                    passed
Result: System architecture check failed.But issue is that prod2 is my active(running node), so how to resolve this issue?
please suggest..
Regards
Umesh

Resolved..
Thanks...

System Utilities Check: Check system for make, ld, ar and cc

Can someone help me with this following problem?
While installing 11i applications, its giving an error "System Utilities Check: Check system for make, ld, ar and cc" When I checked for these files, all the files are existing except for ld. How do I resolve this problem?

Hi,
I hope the installation u r doing is on Windows platform. COpy ld,ar,cc,link,which utilities r under ur winnt\system32. Try to reinstall. & also in the path ensure that ur winnt\system32 & winnt r at the last. It will work. I hope this helps u.
Venkat

Error in installing 11.5.5.35 in system utilities check

While installing the oracle applciations 11.5.5.35, during the system utilites check, it gives the following error, please help me in solving this error.
System Utilities Check
running command : cmd.exe /c F:\rapidwiz\bin\checkutil.cmd d:\mksnt d:\programfiles\Microsoftvisualstudio
F:\rapidwiz>echo off
'which' command is available.
'gnumake' is available.
'cc' is available.
'link' is not available.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has returned an error: 1

Hi
i have installed VC++ , MKS and gnumake before starting the installion. While runing the build_w32.bat, the result is coming sucessful. But in the prerequirement check error link is not available is coming. How to overcome this error?
-Arun

System Utility Check fails - 11i Apps Install on NT

Hello All Thanks for you help & time in advance.
I am trying to install the 11i Trial version on a NT box and the following message is coming up.
It says the following:
System Utilities Check
running command : cmd.exe /c
D:\rapidwiz\bin\checkutil.cmd C:\mksnt C:\VC98
D:\rapidwiz>echo off
'which' command is not available. Check MKS
installation.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has
returned an error: 1

I am having the same problem. Have you been successful in fixing it? if so please help. my email id is [email protected]
Thanks

System Utilities Check error 11i

when instaling 11i.10.0
validate system configuration
System Utilities Check shows warning this...
command : cmd.exe /c D:\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin C:\Microsoft Visual Studio 8
D:\startCD\Disk1\rapidwiz>echo off
'which' command is not available. Check MKS installation.
ERRORCODE = 1 ERRORCODE_END
RW-50011: Error: - System Utilities Availability test has returned an error: 1
how can i resolve this issue.........
regards
sneha

inplace of mkstoolkit i installed cygwin,
which command i need to use in place of this:-
" 'C:\mks\mksnt' for the location of MKS during the installation" -"Provide the pathname to the bin directory under the Cygwin Root Directory instead (For example, "C:\cygwin\bin").
After you install Cygwin, please do the following:
C:\> copy gawk.exe awk.exe (answer yes to copy over existing file)
C:\> copy grep.exe egrep.exe
C:\> copy make.exe gnumake.exe
C:\> copy gcc.exe cc.exe
Add the cygwin bin directory to the system path.
For more details about installing Cygwin, please refer to Note: 302859.1 - Using Cygwin to Maintain Release 11i on Windows
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=302859.1

System Utilities Check: Check system for make, ld, ar and cc - Windows XP

Can somebody help me?
I am trying to install Oracle 11i on a Windows XP home edition machine in a single mode and Vis database. I am getting the error message as following.
System Utilities Check: Check system for make, ld, ar and cc.
Is it possible to install Oracle 11i on XP home edition at all?
Appreciate your help.

How can i find this command make, ld, ar and cc.????
thanks

Filesystem check failed while booting [SOLVED]

I tried to get some help from my previous post but got no answers, so I'll summarize in hope of getting an answer:
I've installed linux before windows because I had this operating system before. But, when I've partitioned I've made a NTFS type 83 for windows, cause I know I'd install it later on.
Now, I've restored my bootloader (grub) but when I try to boot my arch linux copy, a message tells me that my partition sda2 which is my Windows one, isn't clean or corrupt.
all my linux partition are clean, but my NTFS windows partition make me unable to boot on my linux OS with this error msg:
fsck.ext4: Bad magic number in super-block while trying to open /dev/sda2
/dev/sda2:
The superblock could not be read or does not describe a correct ext filesystem. If the devine is valid and it really contains an ext2 filesystem (and not swao or ufs or simething else), then the superblock is corrupt, and you might try running e2fsck with an alternate superbloc:
e2fsck -b 8193 <device>
Next I can do is entering the root psw and use the command line, I really need help to restore my linux partition without formating anything, please.
My guess is that linux doesn't reorganize the partition as it is NTFS and doesn't boot for this reason, but didn't find how to fix it over internet yet, some help would be really appreciated.
Last edited by Mazh (2011-06-10 20:30:39)

My partition layout is:
fdisk -l output:
/dev/sda1 ID (5) extended (don't know what's that didn't think I've made that myself, maybe coming from windows when I installed the NTFS partition)
/dev/sda2 * HPFS/NTFS/exFAT ID (7) (strange cause I had set 87 but well, windows is working correctly it seems)
/dev/sda3 ID (83) linux
/dev/sda5 ID (83) linux
/dev/sda6 ID (83) linux
/dev/sda7 ID (83) linux
/dev/sda8 * ID (83) linux
yep, it's actually strange that my fsck.ext4 check my sda2 partition NTFS...
cat /etc/fstab:
/dev/sda2 /home ext4 defaults 0 1
/dev/sda5 swap defaults 0 0
/dev/sda6 /var ext4 defaults 0 1
/dev/sda7 /usr ext4 defaults 0 1
/dev/sda8 / ext4 defaults 0 1
menu.lst
linux grub
/dev/sd0 (fd0)
/dev/sda (hd0)
/dev/sdb2 (hd1,1)
/dev/sda3 (hd0,2)
title arch linux
root (hd0,7)
kernel /bootvmlinuz26 root=/dev/sda8 ro
initrd /boot/kernel26.img
the arch fallback (same)
title Windows xp lite sp3
rootnoverify (hd0,1)
makeactive
chainloader +1
I really have to write by hands, so if you wants more info tell me and I'll write more.
it's strange, could you explain me what does mean hd1 or hd0? isn't the 1st and second hard drive? and the second array the partition? cause if so, i've only 1 drive. But I'm probably not correct. Hope you get enough info to get me out of this problem!
And no, I'm not using UUIDs, thx for your suggestion!

GCC version check fail in nVidia installer

I have been working on installing Arch64 on my machine, and have been successful up to the installation of the proprietary nVidia drivers. I am using a GeForce 9800 GTX, and since there are no stable drivers for this card, I am using the beta drivers on their site (they do not seem to be in the repos). When I try to run the installing, I get the following error:
The CC version check falied:
The compiler used to compile the kernel (gcc 4.2) does not exactly match the current compiler (gcc 4.3). The Linux 2.6 kernel module loader rejects kernel modules built with a version of gcc that does not exactly match that of the compiler used to build the running kernel.
If you know what you are doing and want to ignore the gcc version check, select "No" to continue installation. Otherwise, select "Yes to abort installation, set the CC environment variable to the name of the compiler used to compile your kernel, and restart installation. Abort now?
If I understand this correctly, I need to downgrade GCC to version 4.3. How would I go about doing this with Pacman? Also, shouldn't the compiler in the repos be the same as the one which created the kernel?
Thanks in advanced.

you are not supposed to do that.. it will break your system, however there is a PKGBUILD for those beta drivers in the aur¹, you can read how to build your own packages here², also useful is this page³
btw welcome to the forums
1.- aur.archilinux.org
2.-http://wiki.archlinux.org/index.php/Makepkg
3.-http://wiki.archlinux.org/index.php/ABS

Agent Configuration assistant failed while 9i installation

Hi I have been installing 9i on my system....everything was fine until I reached the Configuration Tools wizard.
Under this all the tools succeeded in installing except : Agent Configuration assistant, it failed and when I looked into the details it says:
Parameter "orahome" = C:\oracle\ora92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed
Can anyone help me I am stuck at this point..
Thank you

Unfortunately there's a whole bunch of possible reasons, read this note on metalink:
Installing 9.2 Agent Fails with Agent Service Failed
Doc ID:231786.1
Werner

Tried to install OS X and it says OS X could not be installed. File system or resist failed. Quit installer to restart and try again. It keeps me I a circle. How can I truly quit the install and go back to where I was. My time machine not working

i am in a loop. I can't get past this point OS X could not be installed on your computer. when I go to quit the installer I get are you sure you want to quit OS X installer? To quit, click choose startup disk to select a startup diskbfor your computer if you need to restart click restart. I don't have a start up disk and my time machine evidently isn't workig either. Does this mean I have lost everything??? Please someone help!!! I am not a tech person at all and am freaking out right now. How do I remove the download and just go back to what I had. Seriously!!!

Not sure what the iOS is.
iOS cannot run on any Mac computer, just Apple's mobile devices. You have some version of Mac OS X. To find it, please do "About this Mac" from your Apple menu and post what you find along wiuth the processor description.
Some iMacs cannot run newer versions of the Mac OX. That's why we need more info about your specific model. Now that you have the serial number, enter it into the Apple support page to get it translated into a model type:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Report what that says for your model BUT DO NOT post your serial number for security reasons.

When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Maintenance Optimizer - ABAP queue check failed

Hi guys.
When running Maintenance Optimizer for a SAP ERP 6.0 EHP4 which has SAP HR 604 installed, the following message is displayed
ABAP queue check failed
Error The Installation/Upgrade Package for Add-on SAP_HR rel. 600 is not available.
The goal is update toEHP7 SP2.
Not sure why is stating SAP_HR rel. 600 package is not available when the system has 604 release.
During packages selection, Human Capital Management is checked and on the source system is listed SAP_HR 604 SP12
The Solution Manager version is 7.1 SPS8, CR Content is updated to 9.9.
Also have applied SAP Note 1277035 Recommendations, releted to EHP4 Missing, but still no luck
This seems to be similar when SUM perform an EHP Inclusion, and cannot find the packages on the EPS Directory, but this is happening on the Maintenance Optimizer.
Is this a problem with SAP Backbone, or should i do some manual corrections on the system or Solution Manager to make it aware SAP_HR is at al level 604 SP 12?
Thanks!

Hello,
That type of error you describe is mostly always related to an issue in the SMSY/LMDB definition.
It is likely that the issue is a wrong product instance was assigned to the system.
In LMDB it is easy to check , even without verification checks (which sometimes may be the root cause, a bad verification check happens sometimes). If you go to the product system, then open the node technical systems -> AS ABAP -> Software, and go to the product instance tab (in SP10, product instance - details), when you select a given product instance , you see whether the software components that are part of it are installed or not (there is a frame in the lower part of the screen that shows the software components with flag 'installed' ticked or not). Chances are, one or more of the instances have few or no software components installed.
Mind you, you must keep at least one SAP ERP 6.0 product instance assigned, this would be the exception to the rule, but if you have an EHP4 for SAP ERP 6.0 system, it should be only one.
Best regards,
Miguel Ariño

Ciscoworks 3.0 rechability check fails.

Hi friends,
The reachability check fails while checking in Ciscoworks but there is no reachability issue as such. The credentials are also fine. But still the devices are not being imported to DFM / RME.
Screenshots attached.
Regards,
Rajiv

The devices have snmp-server host configured too. But then too there are issues. I also noticed that while deleting some of the learning devices in DFM rediscovery/delete, the devices got stuck as pending devices and were not getting deleted even after hours.
May be reinstallation of the DFM will resolve the issue. Could you please suggest any things that i need to check?
Best Regards // Rajiv

System Utilities Check failed while rapid installation

Similar Messages

Maybe you are looking for