System Validation task and orc status X

Hi All,
we noticed on some accounts where a resource status is Enabled but the orc status is X. even when we try to force them to C the X always seems to come back somehow. the only thing we can find is that for all of these at one time the System Validation task was manually completed.
of course this causes some problems with code that is dependent on the orc status. is there a way to fix these resources?
Thanx in advance.
Fred

Hi,
AD connector version is 9.1.1.0 and "System Validation" is the first default task for the AD user Resource Object. I am not sure, what will it perform. Once its complets, then process form will be generate by executing all releated adaapters and then will be create AD account for that user. How ever, the same user has been created in other Environment with same detials(So no data releated issue).
FYIP. "Auto Save Form" option for the Process Defination is checked.(I got this as solution from some other thread).
Can you please suggest me, what "System Validation" performs, and why its pending status.Any usefull links please?
Thanks.
Edited by: user13285646 on Jul 8, 2011 8:07 AM

Similar Messages

BADI to set task and checklist status based on phase status

Hi,
We have a requirement to set the system status and user status of all the task and checklist to complete when the phase that they belong to is set to status complete.
I have implemented the badi DPR_EVENTS which gets triggered when Phase is completed.
My issue is this badi does not work when the phase is completed as system does not allows the change any data of tasks or checklist items since the phase is complete. I get a message stating "you cannot change the status of this task".
I tried reseting the complete status of teh phase and setting the tasks status and then setting the phase status back to complete. But this does not seem to be working.
Is there any way to achieve this requirement?
Thanks,
Simmi

Since we could not do it on Phase complete event we did it for some other event

Approval process - 'System Validation' - Pending - Assigned to xelsysadm

I created an approval process for a resource.
Whenever a request for a resource is generated for a user, the approval request is sent to a group based on user's location.
Steps:
-I created an approval process in which I added a task which sends the request to the appropriate group.
-An adapter is attached to this task which determines the group to which request is to be sent.
-I have added tcComplete adapter to the Standard Approval
However, after the request is approved by the approver(belonging to the above mentioned group), the resource does not get provisioned and the system validation is shown 'pending' - assigned to user 'xelsysadm'.
I am not able to figure out why the system validation is 'pending' and going to 'xelsysadm'.
Note that I am logged in as xelsysadm and the above pending 'system validation' task is present under 'Open Tasks' under 'To-Do-List'. Once I set the response from there as 'Complete', the resource is provisioned.

I tried provisioning another user, got the oim api error again:
INFO,18 May 2010 13:28:36,925,[XELLERATE.WEBAPP],Key not found in Custom Resource Bundle: newKey = GC.GCPROV.ADAPTER_OIMAPIERROR
DEBUG,18 May 2010 13:28:36,925,[XELLERATE.WEBAPP],Setting the response code as OIM API Error

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

System and User Statuses Missing

Hi All,
Does anyone know what causes the system and user statuses to disappear on the main screen of the production order. Normally we see all system statuses and the current user status like this:
Status CRTD PRC CSER BCRQ MANC SETC REL
User Status ERR
Some configuration must have changed because even though the statuses are in JEST, they are not displayed on the order.
Status
User Status
Thanks for the help,
Malissa

Malissa,
Just a different thinking to see, whether we can get some clues.
I would suggest you get into the order in the change mode, try some minor changes may in terms of operation text etc...and try to save the order. if there are some missing stuff, I am sure now SAP would throw out the error lets take the leads from there on.
Regards,
Prasobh

Task Manager Not loading Properly. Giving Error No more threads can be created in the System.NAPStatus UI and Some other Task related Errors

I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. M

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

Fetching the sales order data using both system status and user status

Hi,
Could any one tell me how to fetch sales orders using both system status and user status.
My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
Early replies are appreciated.
Thanks
Tanveer

Hi,
The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
Regards,
Dipesh.

You must supply a valid username and password to log onto the system.

hi,
i installed hyperion performance suite8.3 on linux by root account,during installation, i select "native" authentication, after installation, when i login the web interface by root account, it tell me:
You must supply a valid username and password to log onto the system.
who can help me?
thanks

Do you have any projects listed in Shared Services ?
... you are also using
Did you put in the right url when you did the HFM config ?
check the httpd.conf file for server name and listening port number ....
what port are you using to login to workspace ?

System status and user status Priority

Hi All,
We have system status and user status for the production order, I would like to know which has higher priority.
E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
Regards,
Ranjan

Hi,
As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
Both work with "AND" condition.
Regards,
Rohit.
Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
Hope the example helps.
Regards,
Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

System status and user status in Line Item Reports

Dear PS-friends,
I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
Has anybody an idea how it works to show the system status and user status in Line Item Reports.
Thanks in advance!

Problem is solved.
I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

How to get system status and user status ?

how to get system status and user status for the given production order?
In which PP table we can
find these?
Thanks&Regards
Satish

Hi Ram,
Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
Alternatively, the following tables store the user and system status info:
JSTO- Status object information
JEST- Individual Object Status
Hope this helps.
Let me know if u need further information.
Regards,
Sonal

Trying to print a book with Aperture 2.1.4, everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window.

everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

everything went well until the final step "uploading files to server" -- it's been spinning for an hour, "status" still reads 0%, "pause task" and "cancel task" buttons are grayed out in Activity window. Any ideas?

How to fetch service order with partucular system status and user status

Hello All,
How to fetch service orders with specific system status and user status.
thanks

I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same.....

IO system status and user status

Hi all,
Could you please tell me where the link between IO sys and user status.
Thank you.

Hi
System status and User status:
System Status
o        The system sets a system status informing the user that the system has executed a certain business transaction for an object.
o        You can only influence this status by executing a business transaction that changes the system status.
o        If you release an internal order, the system automatically sets the Released system status.
User Status
o        You can set a user status in addition to the existing system status.
o        You specify the user status in a status profile, which you create for each order type in Customizing.
o        You can specify and activate any number of user statuses.
o        In a production order you can simultaneously
The system status and the user status influence the business transactions in the same way.
The status profile allows you to:
o        Define the user status and document its functions with a corresponding long text.
o        Assign a status number that specifies the order in which the system reaches the user statuses.
o        Define an initial status, which is then automatically set when an object is created.
o        Determine that a user status is automatically set when you execute a business transaction.
o        Permit or forbid specified transactions, if a status is active.
VVR

Displaying Work Order System and User Statuses in IW37 Search

I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
David Macindoe

David Macindoe,
That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
Regards
Narasimhan

System Validation task and orc status X

Similar Messages

Maybe you are looking for