System variable Quiz Score deducts points when lesson is re-opened (Capt 5.5 with Kallidus LMS)

I'm trying to get to grips with quizing and reporting, particularly complete/incomplete to check content has been covered. I've set up a small test file that awards 1 point to each 'Next' button. The project works well in the LMS when completed in one go and if the user exits halfway through (LMS does report correctly as Incomplete 50%). The problem occurs when reopening the lesson it shows the score correctly for a moment then deducts points.
I've also included a user variable in the project to keep score too. I've tried various options e.g. default data tracking, user can skip quiz, etc but the issue remains.
Pictures below illustrate the problem
First opened - Top score is user set variable, bottom is system variable cpQuizInfoPointsscored
Halfaw and re-open - Completed course to halfway and both scores on lesson both at 5. Shut down lesson and re-opened. The system variable showed 5 for about one second then went to 4 whereas the user variable shows the 'correct' score of 5.
I've looked at the debug file for the LMS and can see that it seems to be behaving as it should i.e calling for postion scores etc and they are correct. Any help appreciated!

HI Loveesh,
There’s no recorded content, I just started a new blank project (so no leftovers from other projects either). The problem occurs in the Kallidus LMS imported as scorm 1.2 package.
Also, finally got it to work in 'Reload Scorm Player' and the lesson acts the same way.
Happy to share file with you, if you want to have a look it’s only 10 Slides @ 500KB.
Cheers

Similar Messages

I saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

i saved a word file onto my imac. when i go to open file in documents with pages the file is grey and unable to open. the workable files are highlighted in bold. is there a way to open this file????

THis is safe for Mac's? Sorry, I have just never heard of this site before.
And there are literally tens of thousands of sites of which I've not heard, too. Not this one.
It's legit. There are lots of links in Apple Support Communities to the LibreOffice web site, as well as others that are legitimate open-source developers of options to buying MS Office, such as NeoOffice and OpenOffice. I have Open Office installed on one of my older Macs that can't run Office 2011 and it is rock-solid.
I've been here too long to start posting bogus urls now.

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping !   Thx

My illustrator CS6 crashes when i try to open an AI file with RGB color mode

My illustrator CS6 crashes when i try to open an AI file with RGB color mode. I worked on this file yesterday and changed it to RGB mode. Today i tried to open the file again but illustrator won't open it and crashes. It does work when i want to open a file with CMYK color mode.
Anyone know how to fix this ?

Have you tried trashing the prefs?

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

What does it mean when iPhoto displays a warning sign with an exclamation point when you try to open a photo in your library?

What is iPhoto 11 trying to tell me when it displays a warning sign with an exclamation point in it when I try to open a photo in my library? I'm corrupted file and that since there are many I may have a bad drive. I have 2 time machine backups (one is off site) but its not clear to me if I can restore individual photos or whether it's worth even trying since ther are many.
Any thoughts from people who have experienced this would be much appreciated.

I rebuilt it using iPhoto Manager and that appears to have worked. I did the rebuild onto a different drive and I'm now working to determine if there is a problem the the external drive that held the corrupted library.

When I try to open a saved image with the "htm" file extension all I get is a page of gibberish text.

I have the new Snow Leopard system on my iMac. I saved several images from an art site. The file extension on each image is "htm". when I try to open each image all I get is gibberish tpye text.
Can convert these "images" to jpeg files so I can view and edit them?
thanks

If the images have a .htm(l) file extension then you need to rename the files and give them an image file extension like .jpg<br />
That should be sufficient to make programs recognize them as images.

This month I downloaded the newest version of PAGES. Now when I try to open the documents made with this program it says "You need a newer version of PAGES to open this document." I go to the App Store and says it has downloaded. What to do?

This month I downloaded the newest version of PAGES. The documents I have typed using this App will now not open and the message says-"You need a newer version of PAGES to open this document. Could anyone help me with this please. Thanks.

You have 2 versions of Pages on your Mac.
Pages 5.2.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
You can add the icon of the missing Pages on your Dock or open Pages from the Apple menu > Recent Items list.
Or you can archive Pages 5 so that it doesn't automatically open.
If you are unhappy about this review/rate Pages 5 in the App Store.
Peter

HT201406 In my Ipod touch 8GB a box like thing appears when I try to open any application along with a voice over. When I tried switching it off, it says voice over always on in the settings and makes it impossible to turn it off. pls help.

In my ipod touch, voice over is activated and when I try to turn it off in settings it says "MUSIC VOICE CONTROL ALWAYS ENABLED". this box like thing also makes it difficult for me to access all my applications or scroll. Pls tell me some suggesstions.

You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Firefax ver 12 crashes when I try to open a second tab with various sites

crashing ver 12 firefox, just shuts down frequently

Hey stewell,
Have you tried starting Firefox in Safe Mode? Hold down "shift" while Firefox is starting up. If the crash doesn't happen in Safe Mode, you should read [[Troubleshooting extensions and themes]].
There is also a lot of useful stuff in the [[Firefox crashes]] Knowledge Base article and you could also try [https://support.mozilla.org/en-US/kb/Managing-profiles?s=create+a+new+profile&r=2&e=es&as=s#w_creating-a-profile Creating a new profile].
Hopefully this helps!

Hp pavilion dv6-2150us system variables - drivers, etc,

I did a windows easy transer, of files from an old Acer amd 32x system to my Pavilion. Not sure how this happened, but when i did a reboot my drivers, system variables and a number of programs got their setup, load instructions all crossed with data from both systems. I tried doing system restore to last date before this occured. Did not fix. Right now I am showing an AMD 64 Architecture. I now show 2 sets of IE 32 & 64, a number of my programs will not run. Is there anyway to fix without having to do a complete factory reset? I do not want to have to complete a full setup all over again. Thanks

Sorry, am unable to accept your answer. I have gone into my system and did the drudgery of digging out all the bad keys from registry. It is not perfectly fixed yet, but better than having to reset to factory settings. Thanks for the answer I knew not to be true. But, I am not a programmer just a hobiest. BrianMrstenter wrote:
Hi @SunnyHomeSD ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion dv6-2150us Entertainment Notebook and issues with a 32 bit install of Windows 7. Your Notebook has Windows 7 Home Premium 64-bit installed. You will have to do a clean install of Windows 7. Here is a link to help with that. Note: Third party site not affiliated with HP.

Problem in picking the system variable value in Calculation Script

Hi All,
We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
Now I am using this system variable in the calculation script as below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportOverwriteFile ON;
Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
DATAEXPORT "File" " " $DEXPORTPATH;
ENDFIX
Here "DEXPORTPATH" is the system variable
I am creating this system variable from the batch script and the system variable value varies at the runtime.
This calculation script works fine for first time and it picks the correct value from the system variable.
But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
The calc script works fine with this.
For next execution, system variable value is changed to "D:\Time\temp.txt"
Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
and performs execution which is wrong.
Please help me on this issue how to handle system variables in calc scripts.
Thanks in advance
Regards
Swathi

811829 wrote:
Hi All,
We are using a Calculation Script to perform data export. And the target location where to crete the exported output file is given to the environment system variable.
Now I am using this system variable in the calculation script as below:
//ESS_LOCALE English_UnitedStates.Latin1@Binary
SET DATAEXPORTOPTIONS
DataExportLevel "ALL";
DataExportOverwriteFile ON;
Fix ( &CurrMiles, &CurrProj, &CurrVer,"No Project","No Version")
DATAEXPORT "File" " " $DEXPORTPATH;
ENDFIX
Here "DEXPORTPATH" is the system variable
I am creating this system variable from the batch script and the system variable value varies at the runtime.
This calculation script works fine for first time and it picks the correct value from the system variable.
But the problem occurs from next execution of calc script. Even if i update the system variable with other value, it picks only the last execution system variable value and it performs execution.
Eg: Suppose for first execution system variable value is "D:\Bkup\PMV.txt"
The calc script works fine with this.
For next execution, system variable value is changed to "D:\Time\temp.txt"
Now the calc script picks the system variable value as "D:\Bkup\PMV.txt"
and performs execution which is wrong.
Please help me on this issue how to handle system variables in calc scripts.
Thanks in advance
Regards
SwathiAs of my knowledge system variables will not update immediately...you need to log off the session after changing the value.
Update the system variable..
Log off from the session..
And Re-login with the same username ....and check...
Regards,
Prabhas

Getting blank screen when i try to open workspace first time

Hi All,
I have installed hyperion 11.1.2.2 version with Oracle 11.2.0.1 database. Installation and configuration completed successfully.
Operating System: Windows Server 2008 64 bit
When i try to open workspace, it is showing blank page in the IE 10
error msg:
<May 7, 2013 4:29:30 AM MST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to RUNNING>
<May 7, 2013 4:29:30 AM MST> <Notice> <WebLogicServer> <BEA-000360> <Server star
ted in RUNNING mode>
*<May 7, 2013 4:29:30 AM MST> <Warning> <Log Management> <BEA-170011> <The LogBro*
adcaster on this server failed to broadcast log messages to the admin server. Th
e Admin server may not be running. Message broadcasts to the admin server will b
e disabled.>
<May 7, 2013 4:37:20 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:61,983 during the configur
ed idle timeout of 5 secs>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090171> <Loading the ident
ity certificate and private key stored under the alias DemoIdentity from the jks
keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090169> <Loading trusted c
ertificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\
DemoTrust.jks.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090169> <Loading trusted c
ertificates from the jks keystore file C:\Oracle\MIDDLE~1\JROCKI~1\jre\lib\secur
ity\cacerts.>
<May 7, 2013 4:38:08 AM MST> <Alert> <Security> <BEA-090152> <Demo trusted CA ce
rtificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyStat
e, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 955019287786924425883848070339045601504642537525227827919067306354412
25109254821799633292360521460473564159575876280112824847724589839778989962768154
40753
public exponent: 65537
Validity: [From: Thu Mar 21 13:12:27 MST 2002,
To: Tue Mar 22 13:12:27 MST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState
, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates sig
ned by the demo trusted CA.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Ent
rust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entru
st\, Inc.,C=US". The loading of the trusted certificate list raised a certificat
e parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2
.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - F
or authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US".
The loading of the trusted certificate list raised a certificate parsing except
ion PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.
11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=
T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate
list raised a certificate parsing exception PKIX: Unsupported OID in the Algori
thmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=
T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate
list raised a certificate parsing exception PKIX: Unsupported OID in the Algori
thmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
loading of the trusted certificate list raised a certificate parsing exception P
KIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\
,LTD.,C=JP". The loading of the trusted certificate list raised a certificate pa
rsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840
.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 20
08 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSig
n\, Inc.,C=US". The loading of the trusted certificate list raised a certificate
parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.
840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
of the trusted certificate list raised a certificate parsing exception PKIX: Uns
upported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
ted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008
GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of t
he trusted certificate list raised a certificate parsing exception PKIX: Unsuppo
rted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<May 7, 2013 4:39:00 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:62,088 during the configur
ed idle timeout of 5 secs>
<May 7, 2013 4:42:50 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:62,321 during the configur
ed idle timeout of 5 secs>
Thanks,
mady
Edited by: mady on May 7, 2013 5:27 PM

Did you configure the web server as the last part of foundation services? You could always get a patch for IE support but the blank screen always appears if the services wasn't started up correctly or if the web server wasn't configured lastly after any configuration change.
About the Weblogic here's where you can get more info about your error message: http://docs.oracle.com/cd/E12839_01/apirefs.1111/e14397/LogMgmt.html
"BEA-170011
Warning: The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.
Description
The LogBroadCaster on the managed server could not find a reference to the DomainLogHandler on the admin server. Messages from this server will not be logged in the domain log.
Cause
The managed server might not be able to reach the admin server. One of the possible causes could be due to the admin server being shutdown.
Action
To fix this problem, inspect the exception stack trace, correct the problem. If the admin server is shutdown, restart it to resume normal log broadcasting to the domain."
Just my 2cents...

Finder continues to crash when I try to open my files

Finder crashes when I try to open my user name with all my files in it. I can click on Macintosh HD, then it gives me a screen with "users" listed. I can click on that and the next screen gives me Guest Folder, my user name, and Shared Folder. When I double-click on my user name (it has a house icon next to my user name), it briefly shows all my files/folders and then crashes.
Here's the log:
Apr 23 16:35:43 Lyndas-MacBook-Pro.local ReportCrash[4921]: Removing excessive log: file:///Users/xxxxxxxx/Library/Logs/DiagnosticReports/Finder_2014-04-18-114538_ Lyndas-MacBook-Pro.crash
Apr 23 16:39:12 Lyndas-MacBook-Pro com.apple.launchd.peruser.501[151] (com.apple.Finder[4922]): Job appears to have crashed: Segmentation fault: 11
Apr 23 16:39:12 Lyndas-MacBook-Pro.local ReportCrash[4928]: Saved crash report for Finder[4922] version 10.9.2 (10.9.2) to /Users/lxxxxxx/Library/Logs/DiagnosticReports/Finder_2014-04-23-163912_Lyndas-M acBook-Pro.crash
Apr 23 16:39:12 Lyndas-MacBook-Pro.local ReportCrash[4928]: Removing excessive log: file:///Users/xxxxxxxxx/Library/Logs/DiagnosticReports/Finder_2014-04-23-132011 _Lyndas-MacBook-Pro.crash
(I have deleted my username from the log above and inserted "x")...
This is a new laptop (2 weeks old) and I have had problems off and on with Finder crashing. But I don't know anything in particular that I've done to get it to work correctly.
Need suggestions.
Thanks!
Here's some other information:
Process:
Finder [4664]
Path:
/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:
com.apple.finder
Version:
10.9.2 (10.9.2)
Build Info:
Finder_FE-885002006000000~2
Code Type:
X86-64 (Native)
Parent Process: launchd [151]
Responsible:
Finder [4664]
Date/Time:
2014-04-23 15:55:21.996 -0500
OS Version:
Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 3 Dispatch queue: TFSVolumeInfo::GetSyncGCDQueue
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
    __TEXT                 0000000107b70000-000000010803f000 [ 4924K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Thread 0:: Dispatch queue: com.apple.main-thread
0   com.apple.Foundation              0x00007fff8cc611ba DYLD-STUB$$CFDateFormatterCreateStringWithDate + 0
1   com.apple.finder                  0x0000000107e41081 0x107b70000 + 2953345
2   com.apple.AppKit                  0x00007fff819c0265 -[NSCell _formatObjectValue:invalid:] + 186
3   com.apple.AppKit                  0x00007fff81a59a67 -[NSCell stringValue] + 146
4   com.apple.finder                  0x0000000107c73dcb 0x107b70000 + 1064395
5   com.apple.finder                  0x0000000107c58e5f 0x107b70000 + 953951
6   com.apple.AppKit                  0x00007fff81a54ab4 -[NSTableView(NSTableViewViewBased) makeViewForTableColumn:row:] + 77
7   com.apple.AppKit                  0x00007fff81a53de7 -[NSTableRowData _addViewToRowView:atColumn:row:] + 305
Don't know if any of this helps or not...
Message was edited by: retired170

Here's some other information:
Process:
Finder [4664]
Path:
/System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier:
com.apple.finder
Version:
10.9.2 (10.9.2)
Build Info:
Finder_FE-885002006000000~2
Code Type:
X86-64 (Native)
Parent Process: launchd [151]
Responsible:
Finder [4664]
Date/Time:
2014-04-23 15:55:21.996 -0500
OS Version:
Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 3 Dispatch queue: TFSVolumeInfo::GetSyncGCDQueue
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
    __TEXT                 0000000107b70000-000000010803f000 [ 4924K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Thread 0:: Dispatch queue: com.apple.main-thread
0   com.apple.Foundation              0x00007fff8cc611ba DYLD-STUB$$CFDateFormatterCreateStringWithDate + 0
1   com.apple.finder                  0x0000000107e41081 0x107b70000 + 2953345
2   com.apple.AppKit                  0x00007fff819c0265 -[NSCell _formatObjectValue:invalid:] + 186
3   com.apple.AppKit                  0x00007fff81a59a67 -[NSCell stringValue] + 146
4   com.apple.finder                  0x0000000107c73dcb 0x107b70000 + 1064395
5   com.apple.finder                  0x0000000107c58e5f 0x107b70000 + 953951
6   com.apple.AppKit                  0x00007fff81a54ab4 -[NSTableView(NSTableViewViewBased) makeViewForTableColumn:row:] + 77
7   com.apple.AppKit                  0x00007fff81a53de7 -[NSTableRowData _addViewToRowView:atColumn:row:] + 305
Don't know if any of this helps or not...

I'm running Windows 7.0 and have installed Adobe Digital Editions 3.0. When I try to open the downloaded acsm file, Windows Media Player tries to open it and can't. Why isn't Adobe DE opening the file? Thanks for help!

On another computer running Windows XP, when I try to open and acsm file with Adobe DE 3.0 I get an error box showing "Error! Check activation." Help!

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

System variable Quiz Score deducts points when lesson is re-opened (Capt 5.5 with Kallidus LMS)

Similar Messages

Maybe you are looking for