System Wide Data Formats Not copied from Development to test

I am using OBIEE 10g. When I copy my dashboards and reports via the Catalog Manager from the development environment to the test environment the system wide data formats are not being copied over. That is, all the ones that I saved under "Column Properties->Column Format->Save As System Wide Default" are not being copied over. I am using archive and unarchive in the Catalog Manager to move from development to test environment. So my question is where are these system-wide defaults stored and what do I need to do get them copied over?
Thanks in advance!

Hi
the system wide column formats are stored in catalog under system/metadata folder.
copy this folder from dev env to test env. via catalog manager, restart ps.
assign points if found helpful.

Similar Messages

STO Delivery Date is not copy from Allocation Table Site Date

Hi,
I have a problem when Stock Transfer Order created based on the Allocation Table, the delivery date is not copy from Allocation Table. E.g. In Allocation Table delivery date is 26.09.2009, but in STO delivery date is 06.11.2009.
Check the configuration and also check the stock, there is stock available to be delivered on 26.09.2009.
Can someone please give me a hint to find out what is missing or wrong, and how to fixed this?
Greatly appreciate for your suggestion and sharing.
Kind Regards,
2tea

I found the problem finally.

Sales Area data is not copying from Reference BP

Hi Experts,
We are working on CRM 5.0 and ECC 6 as back end system.
We have downloaded reference BP from ECC to CRM.We are creating BP in CRM which replicates to ECC.
When we are creating a BP (role as Consumer) from Web IC and from GUI the Sales area data is not copied.We have maintained all relevant data in Reference BP.
Can anybody please suggest me where went wrong?
Points will be awarded for the helpful answer.
Regards,
-Rahul.

Are you creating CRM consumer as a person or organization?
The person must point to the account group that is marked as a consumer (and has the consumer flagged marked in the ECC IMG) out of box should be 0170.
Is your CRM BP getting classified as a consumer? must create as a consumer and not extend it to consumer.
We are still on R/3 and it works, I don't believe anything changes in ECC for the consumer.

Why does text formatting not copy from RH project to RH project?

In RoboHelp 9, I'm copying text, from one RoboHelp project to another. How come the text formatting is not retained? The indenting is off and the small Roman numerals and small letters are changed to bullets.

Different CSS files?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to transport/move a table with data from development to Test to Production

Hi,
How to transport/move a table with data from development to Test to Production..? Export-Import a Delivery Unit does only the structure and not the data
Reg
Sri

Hi Sri,
You cannot transport Data via Transport route in HANA, you can only transport code changes/Structure via DU. For Data movement, you either have a do a export/import from a flat file or replication from a Source System to HANA.
Thanks Much,
Abhishek

Item 000002 is not copied from the reference document

Dear All,
I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
Document types in the system are -
Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
My item category determination is -
Doc. type - Itm cat. gp. - Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
ZPD         -   NORM         - blank   - blank           - G2N                  - L2N
ZPD         -   NORM         - blank   - G2N            - G2N                  - L2N
Z2FC       -   NORM         - blank   - Blank           - TAN                  - TAP
Z2FC       -   NORM         - blank   - TAN            - TANN                - TAN
Copy control is -
Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
During my Z2FC sales order creation I was having line items as follows
Item no. - Mat. code     - Qty -      Higher level item - Item category - Amount
10         - 101329          - 3     -      blank                 - TAN                - 35,000.00
20         - MC091234    - 3     -      10                      - TANN             - 0
30         - MC091234    - 1     -      10                      - TAN                - 5000
We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
At the same time following messages are displayed
Message no. V1475 Item category for item 000002 cannot be determined and
Message no. V1476 Item 000002 is not copied from the reference document
Please help.
Thanks in advance
Piyush Ranpura

Dear All,
Any help???
Yet my issue is unresolved.
Thanks & Regards
Piyush Ranpura

" VL 476: Item 'Official Doc. Number' is not copied from the reference doc"

Hi Guys,
When I am doing the Accrual Reversal in F.81 I am getting the following error
" VL 476: Item 'Official Doc. Number' is not copied from the reference document ".
I have maintained the number ranges also. I am not able to understand why the system is issuing this error.
Pls suggest.
Thanks
Srikanth

Hi Guys,
Can anyone please help on this error.
Thanks
Srikanth

Text is not copied from Customer masterdata to sales document header

Hi Friends,
Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
Same configuration settings are in production as well as quality(VOTXN)
Please suggest me regarding this

Hi Durga,
Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
I hope these will be helpful for you.
Regards,

"Date formatting not supported yet"??

When I add imports to get around the problem described in my previous
email, I run into an exception that says "Date formatting not supported
yet". The exception is thrown in util/HtmlUtil.java. What's the
intention here? Why don't we just return the value unformatted? How
should I handle this so I can take advantage of the formatting if it is
supported someday? Are there any other formatting types which I need
to "handle" in order to run?

Dan--
When I add imports to get around the problem described in my previous
email, I run into an exception that says "Date formatting not supported
yet". The exception is thrown in util/HtmlUtil.java. What's the
intention here? Why don't we just return the value unformatted? How
should I handle this so I can take advantage of the formatting if it is
supported someday? Are there any other formatting types which I need
to "handle" in order to run?The exception lets you know that there is a specific issue you need to work
around during migration. The reason we don't just return the unformatted
value is that we didn't want to give the impression that date formatting
worked when it doesn't (yet).
If you just want the value to come through without an attempt at formatting,
the correct thing to do is to change your JSP tags to eliminate the date
formatting attributes. If this is a loss of data (the format masks), then
you should just comment them out rather than delete them.
The whole issue of date formatting is unfortunately complex. Suffice to say
that it is far easier for the developer to format the date as they wish in
their code then it is for us to try and provide generic date formatting.
The issue revolves around having all the necessary information in order to
do the formatting in a generic way.
Todd

Unloading point is not copied from PR -PO,when i change account assignment

Hi All,
unloading point is not copied from PR -PO,when i change account assignment from 'K' to 'F' in PO. unloading point field should be in display for both 'K' & 'F' Account assignment category in SPRO because we r using this field to acknowledge my thirty party planning system.
Thanks in advance
Vengal Rao

Have a look at SAP note <a href="https://service.sap.com/sap/support/notes/734273">734273</a>

Date format not recognized -- urgent help needed

Hi,
I'm having a problem when start sqlplus in dos command window. If I start it from C:\oracle\ora81\bin, it won't started and error message showing like 'Date format not recognized' and then come back to DOS.
I do have OWB installed which also has SQLPLUS installed so that there is no problem if I start it from C:\ORACLE\owb92\bin.
For some reason, the path is setting as C:\oracle\ora81\bin before C:\ORACLE\owb92\bin so the default always goes to 81 folder.
If restart the DB instance, and this problem is gone. But it comes back after some application running (our own application and Oracle provided OMBPlus ). We double check our own application, and there is no where to "alter session ...".
Any help will be very appreciatged,
Thanks,
Daming

I'm having a problem when start sqlplus in dos command window. If I start it from C:\oracle\ora81\bin, it won't started and error message showing like 'Date format not recognized' and then come back to DOS.
Do you have a file called 'login.sql' in the folder 'C:\oracle\ora81\bin'? If there is one, is there an 'alter session' command in this file?

"date format not recognised" in DBMS_SESSION, on page over db_link

Hi,
I have an Apex 4.0 page which has a region that gets data constituted from a connection across a database link.
The host database is 11.1.0.6 and the remote database is 9.0.1. (Both Standard Edition)
I am using EPG.
Intermittently, I receive the following error (having turned debugging on):
Wed, 25 Aug 2010 10:21:53 GMT
ORA-20867: ORA-01821: date format not recognized
ORA-02063: preceding line from CLIFF
ORA-06512: at "SYS.DBMS_SESSION", line 157
ORA-06512: at "APEX_040000.WWV_FLOW_LANG", line 387
ORA-06512: at "APEX_040000.WWV_FLOW", line 9284
ORA-06512: at "APEX_040000.F", line 267
ORA-06512: at "APEX_040000.F", line 294
ORA-06512: at line 30
I'm somewhat confused as to what is causing the generation of this error.
After receiving this error, anything I else that I do that involves building 'pages' works perfectly fine. I can login/out, no problems.
However, if I try and RUN any page within my application thereafter (all of these access local DB information apart the 1 that generates the error), I continue to receive exactly the same error - no matter which page I am trying to access.
Help?
- Tony.

Hi Patrick,
No. I haven't yet applied the patchset. May do that this afternoon now.
I don't believe I've manually set any date formats anywhere. Just entered the Builder with default options (apart from choosing a theme) and away I went!!
What surprises me is that the application has no problems viewing all the data. The functionality all seems fine. I had this working on a previous setup for months,. without any problems, using version 3.2. (This wasn't migrated though, this was a rebuild from scratch.)
From further "tests", the error seems to occur when I edit the page that involves the remote data.
Normally, a user would land on the page from having used a hyperlink column on a previous page's classic report region.
The point at which it all starts to go wrong is if I connect to the page as normal, but then EDIT the page, and then try and re-run it.
The problem with the date format then re-occurs repetitively, no matter which page I try and view. Sometimes pages will load some components, but then generate odd errors with others. e.g. I have a small series of 3 dial charts, all with slightly varying SQL series (same SQL, slightly different where clause). Now I am seeing that 1 may load and 2 may give odd flash errors...
Right now, I just tried to Export my application - and I still got given the date format error!! Sub-sequent retries allowed the operation to complete successfully.
The only way I seem to be able to eradicate the recurring errors is to kill all the currently connected ANONYMOUS users in the DB, and then relog to the application.
- Tony.

Eq. not copying from Maint. Work order to Work Approval in WCM

Dear Experts,
While I am creating Work Approval from Work Order, Equipment number is not copied from Work Order as per screenshot. why?

Greetings Parag,
You have "Reference Object" in your Sequence above the "Reference Object with Installed equipment", which makes the transaction first fill the Functional Location only, and afterwards, the Equipment field is grayed out by the time it gets to copying it.
Swap the Sequences of fields 50 and 200 or delete the field 50 from copy settings in
SPRO > Plant Maintenance > Work Clearance Management > Master Data > Data Transfer When Creating with Template > Define Fields

System-Wide Column Formats by Subject Area

Can we define System-Wide Column Formats by subject area in OBIEE 11g? If so, how?

Hi, this post is for 10g, bu I don't think much have changed (except the file location: \MWHOME\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\YOUR_CATALOG\root\system\metadata)
http://oraclebi.blog.com/tip-of-the-day-data-format-file-in-obiee/
I didn't test it myself.

Rounding Off Value is not copying from Sales Order to Invoice

Hi Experts,
In Pricing Procedure i maintained DIFF- Rounding Off Condition type with the following Combinations.
Print:X
Requirement:13
Cal Type: 16
Bas Type: 4
When i create sales order the system is calculating Rounding Off after saving the sales order.The requirement is that it should shows the rounding off value before saving the sales order.Secondly when i make invoice the rounding off value is not copying from the saved sales order.After i save the invoice in VF02 the rounding off value is coming .
Regards
Subhasish

Cond type DIFF has cond catgory L Generally new when copying. So the value from sales order will not be copied, it will be redetermined in invoice.
Also rounding off cond is to round the total value which can change in invoice based on the invoice qty.

System Wide Data Formats Not copied from Development to test

Similar Messages

Maybe you are looking for