System wide messages in J2EE

Hello Colleagues,
I would like to know if there any option for Creating system wide
messages in J2EE similar to SM02 in ABAP systems. If not, Can you please
suggest how to go about in order to enable this facility.
Can we develop an application for the same
Thanks and Best Regards,
Smitha
Message was edited by:
Smitha S

Hi,
I have had a portal training last year and to that time it was not possible in Portal 7.0 (don't know which stack) to put in a system message in the Java system.
SAP recommended to write an iview which is placed on the top of the screen so that every user can see it.
I do not know if this is now possible with a newer stack but I think this is already developed by someone and if you have some java or/and iview know-how this shouldn't be a big issue.
Joerg

Similar Messages

Non-system wide DNS Lookups on RBL (i.e. logical groups supported)

Sun Java System Messaging Server documetation seems to state that RBL filtering can only exist in one of three files that are used for filtering based off of inbound connection IP address. My question is, can conditional execution occur for a section of one of these files based of destination e-mail address?
I'd like to have multipule levels of e-mail filtering using RBL and allow users to be assinged to the level of filtering they desire by joining a logical group which will enable a level of RBL filtering for that logical group.
Any help is greatly appreciated, as far as I can see, I can only have one system wide filtering set, so I can't possibly have one set of e-mail ids using 10 RBL (remote black lists) and another group e-mail ids using a smaller set of RBLs.
======= From the documentation =======
MAIL_ACCESS : Used to block incoming connections based on combined information found in SEND_ACCESS and PORT_ACCESS tables: that is, the channel and address information found in SEND_ACCESS combined with the IP address and port number information found in PORT_ACCESS.
ORIG_MAIL_ACCESS : Used to block incoming connections based on combined information found in ORIG_SEND_ACCESS and PORT_ACCESS tables: that is, the channel and address information found in ORIG_SEND_ACCESS combined with the IP address and port number information found in PORT_ACCESS.
PORT_ACCESS : Used to block incoming connections based on IP number.
====================================

Alas, the RBL stuff is done before iMS even knows who the message is addressd to. That stuff is done at the initial connection phase, as our philosophy is to reject a message just as soon as possible . . .
After the message is accepted, then you can opt-in/out for things like spamassassin, brightmail, etc.

Finding a System Error Message (reflected in communication channel)

Hi,
I am working on release 3.0. I have found a System Error Message reflected in JDBC communication channel due to a data problem. I assume that this message is old and I can not find the message. It seems that I need the exact date and time when the message was created in order to find this message. I would like to find the payload to view the data and cancel the message.
Does anyone have any tips on how to find this sort of message?
Thanks,
Leanne

use the standalone Logviewer to read the log files. Works great.
"If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download u2192 SAP NetWeaver u2192 Release 04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
(source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
procedure is ..
1.open Visual Administrator
2.click Log Configurator
3.Runtime->Destinations you can find out which destination is for defaultTrace.X.trx.
4.change the formatter from "com.sap.tc.logging.ListFormatter" to "com.sap.tc.logging.TraceFormatter"
if change couldn't take effect,reboot j2ee.
regards
chandra

OSX System Wide Font Size?

I just bought my first 27 inch iMac..
Although I'm lovin it, I do have it sitting at arms length away from me and am finding the font size vert small..
With this high res display the font is a bit tiny and am just wondering if its possible to change the system wide font size?
Ny eyesight is great but I'm finding that I need the computer right up to my face to be able to comfortable see the fonts..
-Frankie

There are some suggestions here
https://discussions.apple.com/message/17593815#17593815
including changing the screen resolution and the font size for folder and icons.
Another option not mentioned there is to enable the 'Use scroll gesture with modifier keys to zoom' option in
 > System Preferences > Accessibility | Zoom
After that, you can hold down the 'control' key and 2-finger swipe to zoom the entire screen.

Preference Pane for system wide audio EQ? (2 yrs later)

I fully agree with the quoted message underneath.
*"Is there some sort of universal Equalizer I can apply to all my audio? A Preference Pane would be great! I listen to an internet radio client (XM Radio) that doesn't have any EQ control.*
*I know Audio Hijack can do this. But I'd rather not run a whole other application on top of the radio client just for EQ."* (original post from Feb 20, 2007 5:07 PM)
I can't believe that almost 2 years later, there is still no system wide equalizer in OS X, working always, like, while watching YouTube or whatever. Yes, I know there is Hear now, but both apps, Hear and Audio Hijack Pro, are expensive and overkill for the simple ability to change some equalizer settings. A preference pane would be much better.

I found a system wide EQ along with mixer and many other functions it works great its called Hear this is the web sight http://www.joesoft.com/products/hear.php

System copy of a ABAP+J2EE WAS 6.40 system - issue w. J2EE instance/Mapbox

Hi guys and girs!
I'm doing a system copy of a CRM 4 system based on Web AS 6.40 and with a dual stack system.
The J2EE instance is only used for Mapbox and nothing else.
I've done a system export of the J2EE instance on the source system, but when I import it, it gives me the following message "No SAP data found in database CRD"
Is this because Mapbox does not use the database or have I done something wrong?
I run sapinst.exe and choose SAP CRM 4 - System Copy - Target System - Java system - MS SQL Server - Migration-Target System Installation to import the exported data.
Maybe there is no data?!?! and I sould only install a Java central instance and then deploy the mapbox package with SDM?!
regards
rollo
Edited by: rollo on Dec 10, 2008 3:14 PM

Hi!
No, I haven't figured it out.
But since we are not going to use the groupware integration for some time, I might just skip it and install it during or after the upgrade.
rollo

System Wide Permissions Problem

I have a MacBook Pro, OS 10.5.8, which I've been using since 2009, and this is the first time I've encountered the problem described below.
I'm suddenly having what seems to be a system wide permissions problem. Tonight I found I couldn't add a new folder (the option was grayed out), and I noticed a pencil icon with a line through it at the bottom of the window. When I chose Get Info for that window, my name was missing from Sharing & Permissions. There was also a new name, "wheel", which I've never seen before. (3 names in all: system, wheel, eveyone.) This affects a lot of folders stemming off the HD (Applications, Library, etc.), but my user folder folder is unaffected.
I've rebuilt the permissions several times in Disk Utility, and also repaired the disk after getting an error message when verifying. But the permissions problem is still there.
So I'm wondering what in the heck could have caused this, and how can I fix it?
I found I could add my name back to the permissions list in one of the affected folders, using Get Info, and this solved the issue for that folder, but there are a LOT of folders with the same issue. Perhaps if I did this with the HD folder, and selected the "Apply to enclosed items" option at the bottom?
FWIW, we just bought & set up a new iMac, OS 10.8.2, last week. I looked at a number of folders on it using Get Info, and it seems to be configured pretty much the same way with regard to permissions, which is a little spooky. Don't know if it makes any difference, but I used the same user name, login password, apple ID & password when I set up the new computer as I have on my Macbook. Could that have caused this somehow?
Thanks for any help or thoughts.

Thank you, BDAqua for the link.
I use my MacBook Pro mainly for creating music (DAW program & plug-ins). I've occasionally had to change permissions on individual plug-ins, but never to a group of folders on this scale.
I'm wondering if there's a way to get my old permissions back, or if I should leave it as is at this point, and add my user name to the permissions on individual folders as the need arises? Don't want to screw everything up, as this is getting a little over my head.
Any recommendations?

System wide freezes since 10.5.5

Ever since upgrading to 10.5.5 I've noticed the following sort of system-wide freeze on my iMac.
First, one application becomes unresponsive; you get the spinning beachball of death; you can still move the mouse around and click; every application becomes unresponsive, including the Finder. Only a hard restart works.
At first I noticed the problem in iChat, and looked into that. Hey presto, other users are experiencing the same problem with iChat, so I wrote to Apple/feedback and sat and waited. I stopped using iChat, and then found it happened in iTunes. Look at the iTunes discussion, and yes, there it is again, other users having the same problem.
I've repaired permissions, run Onyx, done everything I can think of.
Console doesn't have any useful (to me) messages. It says:
26/09/2008 18:47:48 mDNSResponder[17] Failed to obtain NAT port mapping 00048CF8 from router 192.168.1.254 external address 0.0.0.0 internal port 5353 error 0
26/09/2008 18:47:49 kernel jnl: disk1s3: journal replay done.
26/09/2008 18:47:49 fseventsd[40] event logs in /Volumes/Time Machine Backup destination/.fseventsd out of sync with volume. destroying old logs. (2414 4 2606)
26/09/2008 18:47:49 fseventsd[40] log dir: /Volumes/Time Machine Backup destination/.fseventsd getting new uuid: 4B7F4EF0-7E6D-4E02-80DC-4F9DD9FBDB89
26/09/2008 18:47:49 mds[34] (/Volumes/Time Machine Backup destination/.Spotlight-V100/Store-V1/Stores/E77C8009-6066-4242-A13D-CD5BAC0FB62 E)(Error) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Time Machine Backup destination/.Spotlight-V100/Store-V1/Stores/E77C8009-6066-4242-A13D-CD5BAC0FB62 E/live.0.; needs recovery
26/09/2008 18:47:52 mDNSResponder[17] Failed to obtain NAT port mapping 0080A41C from router 192.168.1.254 external address 0.0.0.0 internal port 4500 error 0
26/09/2008 18:48:10 kernel BootCache: hit rate below threshold (10214 hits on 20429 lookups)
26/09/2008 18:48:39 mdworker[76] (Error) SyncInfo: Boot-cache avoidance timed out!
26/09/2008 18:48:51 mdworker[76] (Error) SyncInfo: Catalog changed during searchfs too many time. Falling back to fsw search /
That kernel bootcache looks ominous, but I have little idea what it means. I wonder whether it's something to do with Time Machine backing up. Of course, the above might just be totally unrelated to what's going wrong. (Looking at Console is I find rather like looking at a medical dictionary; it's truly frightening, but most of it never in practice seems to be a problem.)
Anyone else experiencing random system freezes only since 10.5.5? Anyone suggest what else I can try or look for in Console to pin things down a bit more?

Hello all,
Let me chime in on this also... I also experienced freezes immediately after I updated to 10.5.5 from 10.5.4 about 10 days ago. I had never had my Mac (Black MacBook with 4GB or RAM) freeze that much, so I concluded that it had to do with the update.
After multiple freezes, I brought the Mac to the Apple Store where a Genius did a disk check, hardware check and everything checked out OK. However, the random freezes remained. They then did an archive and install *back to 10.5.4*, but same thing, freezes remained. At random intervals.
Around that time, I noticed that if I waited long enough, the machine would return from the freeze and everything would operate normally after that.
I seem to remember that the first ever time I noticed the freeze was when I was working in the Mail application.
After my fifth successive daily visit to the Genius Bar, where they offered to completely format my internal drive, install a fresh copy of 10.5.4 and re-load my data back in. On this, they completely failed me, they returned my computer with half of the applications missing (the iPhoto application was not even on the drive), and my data partially restored.
I then decided to re-format my drive once again, use the 10.5.2 Install Disk that came with my Mac to freshly install the OS. Then immediately thereafter I downloaded the 10.5.5 combo installer and used it to upgrade to 10.5.5. Then, I selectively copied files from my Time Machine backup hard drive back to my internal drive.
Time Machine did not work for me when trying to restore e-mail mailboxes. It only partially imported the mailboxes I needed. Instead I had to do an "import mailboxes" from the Mail application and point it to the mailbox location on my Time Machine backup.
So, now I have a system that is lean and clean, I didn't install any "major" other applications using installers, just a few applications I drag-copied to the Applications folder.
The machine ran fine for a day or two, until I tried to move some mail from my inbox into another mailbox. Boooom, spinning beach ball again. I let the machine sit for about 5 minutes, and it came back. But this indicates that there is still an issue.
Since I also experienced this problem after going back to 10.5.4, I am wondering whether the 10.5.5 install does affect firmware or other device 'hardware' functionality that remains, even after reverting to 10.5.4. This is the only reason I can come up with for why the problem still existed when I went to 10.5.4.
Anyway, this post does not provide a solution, but merely some other data points.
Oh and by the way, I had never even started iTunes before this problem showed up again this morning. So, not sure whether it is related to iTunes.

System wide mini malfunctions

I have a mac mini i5 (2.3 GHz mid 2012)
OS X 10.8.3
I have multiple log in accounts (main, kids etc)
I upgraded to Mountain Lion a few months ago and just now realized there are system wide malfunctions going on.
Prior to upgrade, I backed up, wiped the drive clean, then installed Lion and a week later upgraded to Mountain Lion.
Problems:
Loging into account C: I am greeted with a "Enter iCloud ID or create a new one" then another screen saying "Enjoy your computer." I have entered the info at this prompt and am greeted by the same prompt the next time I log in. I have had an icloud account for months and this info is entered in the Pref Settings as well. It is as if the computer is not remebering the info I am entering.
Login items that have been turned off, will be turned back on after login or reboot.
Account A- Finder - if I customize the side bar of the finder window, it will accept the changes for my current session, but if I log out or restart, the customization is reverted back to the default
Mail - opens two window upon launching, it will not remember my toolbar customization (similar to the finder side bar problem above)
will not remember changes to pref settings like "move junk mail to trash"
Account B Safari will not remember auto log in info.
I've tried repairing disk permissions
I've gotten advice to delete various .plists and data states.
None of this has helped. I feel like I'm working on a computer in the public library. Urrggh!

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

System-wide cluster freeze

Hello,
We're experiencing many system-wide freeze instances in which many cluster members reported the following errors. We had to shut down cluster members one by one until the remaining system could be freed up. Our customer had many tools to monitor the network health. The network seemed not an issue. We've increased lots of memory to the nodes but there was no correlation to the memory size. What could be other possible causes that Grid.poll() hang?
Thanks!
-Edwin
2013-05-29 16:06:39,510 ERROR [Logger@9215997 3.6.1.9             ] [Coherence:3] ( ) 2013-05-29 16:06:39.510/23816.450 Oracle Coherence GE 3.6.1.9 <Error> (thread=ReplicatedCache:QuartzReplicatedCache, member=1): Detected soft timeout) of {WrapperGuardable Guard{Daemon=ReplicatedCache:QuartzReplicatedCache:EventDispatcher} Service=ReplicatedCache{Name=QuartzReplicatedCache, State=(SERVICE_STARTED), Id=6, Version=3.0, OldestMemberId=73}}
2013-05-29 16:06:39,588 WARN [Logger@9215997 3.6.1.9             ] [Coherence:3] ( ) 2013-05-29 16:06:39.588/23816.528 Oracle Coherence GE 3.6.1.9 <Warning> (thread=Recovery Thread, member=1): Attempting recovery of Guard{Daemon=ReplicatedCache:QuartzReplicatedCache:EventDispatcher}
2013-05-29 16:06:39,588 ERROR [Logger@9215997 3.6.1.9             ] [Coherence:3] ( ) 2013-05-29 16:06:39.588/23816.528 Oracle Coherence GE 3.6.1.9 <Error> (thread=ReplicatedCache:QuartzReplicatedCache:EventDispatcher, member=1): This thread was interrupted while waiting for the results of a request:
Poll
PollId=211929, active
InitTimeMillis=1369836341758
Service=QuartzReplicatedCache (6)
RespondedMemberSet=[]
LeftMemberSet=[]
RemainingMemberSet=[73]
2013-05-29 16:06:39,588 ERROR [Logger@9215997 3.6.1.9             ] [Coherence:3] ( ) 2013-05-29 16:06:39.588/23816.528 Oracle Coherence GE 3.6.1.9 <Error> (thread=ReplicatedCache:QuartzReplicatedCache:EventDispatcher, member=1): An exception occurred while dispatching the following event:
DispatchEvent: MemberEvent{Member=47 LEFT com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache}
2013-05-29 16:06:39,588 ERROR [Logger@9215997 3.6.1.9             ] [Coherence:3] ( ) 2013-05-29 16:06:39.588/23816.528 Oracle Coherence GE 3.6.1.9 <Error> (thread=ReplicatedCache:QuartzReplicatedCache:EventDispatcher, member=1): The following exception was caught by the event dispatcher:
2013-05-29 16:06:39,619 ERROR [Logger@9215997 3.6.1.9             ] [Coherence:3] ( ) 2013-05-29 16:06:39.588/23816.528 Oracle Coherence GE 3.6.1.9 <Error> (thread=ReplicatedCache:QuartzReplicatedCache:EventDispatcher, member=1):
(Wrapped: Interrupted while waiting for response from:[Member(Id=73, Timestamp=2013-05-29 05:38:20.434, Address=10.70.0.50:8090, MachineId=19506, Location=site:machine:TPTEXT50,process:3632, Role=StorageNodeDaemon)]) java.lang.InterruptedException
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.processPollInterrupt(Grid.CDB:40)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:60)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.requestLock(ReplicatedCache.CDB:42)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ReplicatedCache.lockResource(ReplicatedCache.CDB:47)
     at com.tangosol.coherence.component.util.CacheHandler.lock(CacheHandler.CDB:3)
     at com.tangosol.coherence.component.util.SafeNamedCache.lock(SafeNamedCache.CDB:1)
     at com.navis.framework.quartz.cluster.cache.coherence.CoherenceQuartzCache.removeObjectFromLockedCache(CoherenceQuartzCache.java:195)
     at com.navis.framework.quartz.cluster.cache.coherence.CoherenceQuartzCache.removeNode(CoherenceQuartzCache.java:136)
     at com.navis.framework.quartz.QuartzHelper.removeNode(QuartzHelper.java:219)
     at com.navis.framework.quartz.cluster.cache.coherence.QuartzNodeListener.memberLeft(QuartzNodeListener.java:54)
     at com.tangosol.net.MemberEvent.dispatch(MemberEvent.java:116)
     at com.tangosol.net.MemberEvent.dispatch(MemberEvent.java:87)
     at com.tangosol.coherence.component.util.SafeService.translateEvent(SafeService.CDB:28)
     at com.tangosol.coherence.component.util.SafeService.memberLeft(SafeService.CDB:1)
     at com.tangosol.net.MemberEvent.dispatch(MemberEvent.java:116)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$DispatchEvent.run(Grid.CDB:7)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service$EventDispatcher.onNotify(Service.CDB:26)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.InterruptedException
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:485)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:32)
     ... 17 more
Edited by: user10362631 on May 29, 2013 4:32 PM

This log indicated the process caused the problem.
(Wrapped: Interrupted while waiting for response from:[Member(Id=73, Timestamp=2013-05-29 05:38:20.434, Address=10.70.0.50:8090, MachineId=19506, Location=site:machine:TPTEXT50,process:3632, Role=StorageNodeDaemon)]) java.lang.InterruptedException
If you still have the log file from member 73, take a look at the log file. You might find service guardian triggered and thread dump within the log. The log message just before the thread dump section should tell you which thread caused the problem.

Toggle on/off Notifications system wide

Seeing as how there is no iOS community (don't see it anyway), I'm asking this here.
I don't think it's possible, but it would be nice to toggle on/off Notification center system wide. As it is now, I have to turn Notifications off for each individual app.
Sometimes i want NO notifications at all (like while watching a movie with someone who I might not want to see all of my notifications) and it would be easier to just turn them off, with one toggle, and turn back on again when I am ready to have notifications again (remembering which apps I had notifications turned on and which ones I didn't).

Do Not Disturb
http://support.apple.com/kb/HT5463
Message was edited by: Demo

Having system wide crashes. Help to identify the problem.

Hello:
I'm having system-wide random crashes when trying to record computer screen and audio using Screenflow 5.0
Computer
MacBook Pro (Retina, 13-inch, Late 2013)
2.4 GHz Intel Core i5 8 GB 1600 MHz DDR3 Intel Iris 1536 MB
OSX 10.10.1 (14B25)
I did the online Apple Hardware Test and everything looks ok
Any leads?
Help is appreciated
Here's a crash log:
Anonymous UUID:       E47FE6B0-9479-A72A-C505-9E4A39BF5EE5
Mon Jan 12 20:06:55 2015
*** Panic Report ***
Machine-check capabilities: 0x0000000000000c07
family: 6 model: 69 stepping: 1 microcode: 23
signature: 0x40651
Intel(R) Core(TM) i5-4258U CPU @ 2.40GHz
7 error-reporting banks
Processor 0: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC6_STATUS(0x419): 0xbe0000000008111a
IA32_MC6_ADDR(0x41a):   0x00000000feb80080
IA32_MC6_MISC(0x41b):   0x0000007042000086
Processor 1: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC6_STATUS(0x419): 0xbe0000000008111a
IA32_MC6_ADDR(0x41a):   0x00000000feb80080
IA32_MC6_MISC(0x41b):   0x0000007042000086
Processor 2: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC6_STATUS(0x419): 0xbe0000000008111a
IA32_MC6_ADDR(0x41a):   0x00000000feb80080
IA32_MC6_MISC(0x41b):   0x0000007042000086
Processor 3: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC6_STATUS(0x419): 0xbe0000000008111a
IA32_MC6_ADDR(0x41a):   0x00000000feb80080
IA32_MC6_MISC(0x41b):   0x0000007042000086
panic(cpu 1 caller 0xffffff800da1f12a): "Machine Check at 0xffffff800da3af57, registers:\n" "CR0: 0x000000008001003b, CR2: 0x0000000114a50498, CR3: 0x0000000010626000, CR4: 0x00000000001626e0\n" "RAX: 0x0000000000000060, RBX: 0x07fffffffffffb5f, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff8119183ee0, RBP: 0xffffff8119183f20, RSI: 0xffffff800e0e8c40, RDI: 0xffffff800e029d60\n" "R8: 0x0000000100000000, R9: 0x0000000000000000, R10: 0x0000000000000001, R11: 0x0000000000000200\n" "R12: 0x0000000000000000, R13: 0xffffff800e0e8fc0, R14: 0x0000000000000340, R15: 0x0000000000000060\n" "RFL: 0x0000000000000046, RIP: 0xffffff800da3af57, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/trap_native.c:1 68
Backtrace (CPU 1), Frame : Return Address
0xffffff810f75de90 : 0xffffff800d93a811
0xffffff810f75df10 : 0xffffff800da1f12a
0xffffff810f75e070 : 0xffffff800da3acef
0xffffff8119183f20 : 0xffffff800da202ae
0xffffff8119183f40 : 0xffffff800d9514bb
0xffffff8119183f90 : 0xffffff800d951970
0xffffff8119183fb0 : 0xffffff800da192c7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000000d600000
Kernel text base: 0xffffff800d800000
__HIB text base: 0xffffff800d700000
System model name: MacBookPro11,1 (Mac-189A3D4F975D5FFC)
System uptime in nanoseconds: 625247613175
last loaded kext at 21430535164: com.apple.driver.AppleBluetoothMultitouch 85.3 (addr 0xffffff7f8fddb000, size 61440)
last unloaded kext at 113064189506: com.apple.driver.AppleIntelLpssI2C 2.0.45 (addr 0xffffff7f8f871000, size 36864)
loaded kexts:
net.telestream.driver.TelestreamAudio 1.1.1
com.karios.driver.DuetDisplay 1
com.apple.driver.AppleBluetoothMultitouch 85.3
com.apple.filesystems.autofs 3.0
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.AGPM 100.14.37
com.apple.driver.X86PlatformShim 1.0.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHDA 267.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleCameraInterface 5.23.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleIntelHD5000Graphics 10.0.0
com.apple.driver.AppleIntelFramebufferAzul 10.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.5.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.IOBluetoothHIDDriver 4.3.1f2
com.apple.driver.AppleMultitouchDriver 260.30
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOSurface 97
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOSerialFamily 11
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
com.apple.kec.Libm 1
Model: MacBookPro11,1, BootROM MBP111.0138.B11, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 2.16f68
Graphics: Intel Iris, Intel Iris, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453120
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453120
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256F, 251 GB
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: USB Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 17.2

All to common...
https://discussions.apple.com/message/16286052#16286052
http://mac.bigresource.com/iMac-screen-has-shadow-cloud-smoke-milky-spots--9r7bv oKsp.html
Do you have extended AppleCare?

System-wide kb shortcut for mail functions

I'd like to be able to program a system-wide, universal kb shortcut to:
-- start a new, blank mail message
-- check for new mail (in other words, poll my mail server) without bringing mail to the front
ideas? I've been using Butler now for a while and I like it, but it seems limited in its ability to handle something like what I want to do. an automator script could work but I don't know how to assign a script to a system-wide kb shortcut.
thanks!

QuicKeys will let you do pretty well anything.

System Wide Paging in CUCM 7.0?

What's the best way to get system wide paging setup in an existing CUCM 7.0 environment?
Thanks!

Hi
Short answer is that CUCM (unlike CUCME) doesnt' support paging / tannoy operation natively.
There are a number of 3rd party products that do provide this. A quick search through this forum will find a thread from a couple of weeks ago where this was discussed.
Link:
https://supportforums.cisco.com/message/3352322#3352322
HTH. Barry

System wide alert(notification)

Can we show system wide alert(notification) using any of the J2ME MIDP 2.0 function. It is something like we have our MIDlet is runing, and the we move to some other screen, likeContacts or Message, and afterwards some activity takes place in our MIDlet running in background, so can we show some notification or alert at that time to let user know for that activity without being actually in that MIDlet.
Do reply.

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

System wide messages in J2EE

Similar Messages

Maybe you are looking for