System wide search...

hello,
i'm trying to come up with the best way to search system wide for files that contain a certain name or maybe a certain type of file. i'm looking at any possibilities...here are some i've considered...
applescript - list folder
shell script - find, locate, msfind, ls | grep
cocoa/carbon - nsdirectoryenumerator, fscatalogsearch
i know this is the applescript forum but since there are some limitations (i think) in searching with plain applescript i'm sure all of you might have some suggestions as to what is the best approach? as for the search being system wide i should say as much possible because i want to keep the time down (as fast as possible). so i can take some shortcuts if necessary...
thank you,
rick

Great!
This test shows that the search is for files containing the name. notice that some of the files begin with period.
mac $ ~/findfile -r /Volumes/Macintosh-HD/ "bash-" | grep '^/Users/mac/Desktop/iMac/z-find/'
/Users/mac/Desktop/iMac/z-find/.bash-backup-copy-initial-dot-copy.html
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot
/Users/mac/Desktop/iMac/z-find/bash-backup-copy-invisible-attr.html
/Users/mac/Desktop/iMac/z-find/bash-backup.html
/Users/mac/Desktop/iMac/z-find/bash-batChmod.html
/Users/mac/Desktop/iMac/z-find/bash-battery__yellow__4k.html
/Users/mac/Desktop/iMac/z-find/bash-copy
/Users/mac/Desktop/iMac/z-find/bash-copy-invisible-attr
/Users/mac/Desktop/iMac/z-find/bash-folder__green
/Users/mac/Desktop/iMac/z-find/.bash-copy-initial-dot/bash-backup-inside-bash.ht ml
/Users/mac/Desktop/iMac/z-find/bash-copy/bash-backup-inside-bash-copy.html
/Users/mac/Desktop/iMac/z-find/bash-copy/ping_command-bash-copy.html
mac $
Robert

Similar Messages

FDM System-wide

I tried using FDM and i love it. However, I did a thorough Google search and this forum for a solution to my issue but could not find any answer. I hope someone will be able to assist me with a solution.
Am wondering if it is possible for FDM to fetch mails from an ISP Domain box (multidrop/catchall mailbox) that holds mails for several users , and then hand them to Postfix that has Dovecot LDA delivery configured. The mails will then be delivered (by Dovecot's LDA) to respective users. I use Fetchmail (that is able to do this), but there are some issues with it, (like sometimes it gets stuck on large mails, etc).
Here I illustrate my current Fetchmail System-wide setup's /etc/fetchmailrc file:
# /etc/fetchmailrc
set postmaster [email protected]
set no bouncemail
set daemon 300
set logfile = "/var/log/fetchmail.log"
poll isp.domain.com proto pop3
localdomains abc.net
no dns
no envelope
user domain_mbox_username
pass domain_mbox_passwd
is * here
In the above fetchmailrc, "is * here*, * is aliased to our catchall account in our local postfix server. The ISP domain mailbox is configured as a catch-all domain and it holds our users emails (several different email addresses but all "@abc.net")
I couldnt find a way to do this with FDM since I am limited to delivering to mbox/maildir directly, and the way I understand it is that I would have to create individual inbox references. This would be tedious if we have some hundreds pop3 local mailboxes, ( I might be wrong in my assumption).
With my current setup, aliasing to the catchall account automatically distributes to respective mailboxes by reading the mail headers. (and also am not very good in coding, please treat me like a newbie )
Looking forward to your assistance.
Thanks and regards,
Clemo
Last edited by wclemo (2013-07-24 17:28:45)

Hi, this post is for 10g, bu I don't think much have changed (except the file location: \MWHOME\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\YOUR_CATALOG\root\system\metadata)
http://oraclebi.blog.com/tip-of-the-day-data-format-file-in-obiee/
I didn't test it myself.

System wide lag

Hello guys, new member here.
I'd like you guys to help me out with something here.
I have a 13 inch, mid 2013 macbook pro with a 2.9 ghz i7, 8 gb RAM and a 750 gig HDD.
My problem is every now and then there is a system wide lag which freezes pretty much everything and audio playing from itunes also pauses during that time, it's quite frustrating as i've been searching for a fix since yesterday but havent found anything that can completely fix it. Usually there is only itunes, safari, mail and maybe one or two more things open at a time. I have checked my HDD for issues but there seem to be none. I suspect that this is related to the CPU since while I was using safari, a process called WindowServer would start using around 35% CPU, with nothing that intensive open on the browser
Note: This was ocurring much more frequently this morning but it has gotten a bit better now after I downloaded chrome and started using it instead of safari, I would, however, like to use safari instead.
Thanks in advance, I would be very thankful if someone could help me out with this, I have my exams coming up and I rely on my laptop for a lot of stuff.

I've got this problem on Macbook pro (mid 2010, 2,4ghz i5, 8gb ram, nvidia gt330m)
I don't think it ever happened before upgrading to mavericks. But now it's horrible!
It seems to only happen to me when I'm running unity3D, but does happen every minute or even more often. And the system freezes for anywhere between a second and 15 seconds...

System wide freezes since 10.5.5

Ever since upgrading to 10.5.5 I've noticed the following sort of system-wide freeze on my iMac.
First, one application becomes unresponsive; you get the spinning beachball of death; you can still move the mouse around and click; every application becomes unresponsive, including the Finder. Only a hard restart works.
At first I noticed the problem in iChat, and looked into that. Hey presto, other users are experiencing the same problem with iChat, so I wrote to Apple/feedback and sat and waited. I stopped using iChat, and then found it happened in iTunes. Look at the iTunes discussion, and yes, there it is again, other users having the same problem.
I've repaired permissions, run Onyx, done everything I can think of.
Console doesn't have any useful (to me) messages. It says:
26/09/2008 18:47:48 mDNSResponder[17] Failed to obtain NAT port mapping 00048CF8 from router 192.168.1.254 external address 0.0.0.0 internal port 5353 error 0
26/09/2008 18:47:49 kernel jnl: disk1s3: journal replay done.
26/09/2008 18:47:49 fseventsd[40] event logs in /Volumes/Time Machine Backup destination/.fseventsd out of sync with volume. destroying old logs. (2414 4 2606)
26/09/2008 18:47:49 fseventsd[40] log dir: /Volumes/Time Machine Backup destination/.fseventsd getting new uuid: 4B7F4EF0-7E6D-4E02-80DC-4F9DD9FBDB89
26/09/2008 18:47:49 mds[34] (/Volumes/Time Machine Backup destination/.Spotlight-V100/Store-V1/Stores/E77C8009-6066-4242-A13D-CD5BAC0FB62 E)(Error) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Time Machine Backup destination/.Spotlight-V100/Store-V1/Stores/E77C8009-6066-4242-A13D-CD5BAC0FB62 E/live.0.; needs recovery
26/09/2008 18:47:52 mDNSResponder[17] Failed to obtain NAT port mapping 0080A41C from router 192.168.1.254 external address 0.0.0.0 internal port 4500 error 0
26/09/2008 18:48:10 kernel BootCache: hit rate below threshold (10214 hits on 20429 lookups)
26/09/2008 18:48:39 mdworker[76] (Error) SyncInfo: Boot-cache avoidance timed out!
26/09/2008 18:48:51 mdworker[76] (Error) SyncInfo: Catalog changed during searchfs too many time. Falling back to fsw search /
That kernel bootcache looks ominous, but I have little idea what it means. I wonder whether it's something to do with Time Machine backing up. Of course, the above might just be totally unrelated to what's going wrong. (Looking at Console is I find rather like looking at a medical dictionary; it's truly frightening, but most of it never in practice seems to be a problem.)
Anyone else experiencing random system freezes only since 10.5.5? Anyone suggest what else I can try or look for in Console to pin things down a bit more?

Hello all,
Let me chime in on this also... I also experienced freezes immediately after I updated to 10.5.5 from 10.5.4 about 10 days ago. I had never had my Mac (Black MacBook with 4GB or RAM) freeze that much, so I concluded that it had to do with the update.
After multiple freezes, I brought the Mac to the Apple Store where a Genius did a disk check, hardware check and everything checked out OK. However, the random freezes remained. They then did an archive and install *back to 10.5.4*, but same thing, freezes remained. At random intervals.
Around that time, I noticed that if I waited long enough, the machine would return from the freeze and everything would operate normally after that.
I seem to remember that the first ever time I noticed the freeze was when I was working in the Mail application.
After my fifth successive daily visit to the Genius Bar, where they offered to completely format my internal drive, install a fresh copy of 10.5.4 and re-load my data back in. On this, they completely failed me, they returned my computer with half of the applications missing (the iPhoto application was not even on the drive), and my data partially restored.
I then decided to re-format my drive once again, use the 10.5.2 Install Disk that came with my Mac to freshly install the OS. Then immediately thereafter I downloaded the 10.5.5 combo installer and used it to upgrade to 10.5.5. Then, I selectively copied files from my Time Machine backup hard drive back to my internal drive.
Time Machine did not work for me when trying to restore e-mail mailboxes. It only partially imported the mailboxes I needed. Instead I had to do an "import mailboxes" from the Mail application and point it to the mailbox location on my Time Machine backup.
So, now I have a system that is lean and clean, I didn't install any "major" other applications using installers, just a few applications I drag-copied to the Applications folder.
The machine ran fine for a day or two, until I tried to move some mail from my inbox into another mailbox. Boooom, spinning beach ball again. I let the machine sit for about 5 minutes, and it came back. But this indicates that there is still an issue.
Since I also experienced this problem after going back to 10.5.4, I am wondering whether the 10.5.5 install does affect firmware or other device 'hardware' functionality that remains, even after reverting to 10.5.4. This is the only reason I can come up with for why the problem still existed when I went to 10.5.4.
Anyway, this post does not provide a solution, but merely some other data points.
Oh and by the way, I had never even started iTunes before this problem showed up again this morning. So, not sure whether it is related to iTunes.

System wide mini malfunctions

I have a mac mini i5 (2.3 GHz mid 2012)
OS X 10.8.3
I have multiple log in accounts (main, kids etc)
I upgraded to Mountain Lion a few months ago and just now realized there are system wide malfunctions going on.
Prior to upgrade, I backed up, wiped the drive clean, then installed Lion and a week later upgraded to Mountain Lion.
Problems:
Loging into account C: I am greeted with a "Enter iCloud ID or create a new one" then another screen saying "Enjoy your computer." I have entered the info at this prompt and am greeted by the same prompt the next time I log in. I have had an icloud account for months and this info is entered in the Pref Settings as well. It is as if the computer is not remebering the info I am entering.
Login items that have been turned off, will be turned back on after login or reboot.
Account A- Finder - if I customize the side bar of the finder window, it will accept the changes for my current session, but if I log out or restart, the customization is reverted back to the default
Mail - opens two window upon launching, it will not remember my toolbar customization (similar to the finder side bar problem above)
will not remember changes to pref settings like "move junk mail to trash"
Account B Safari will not remember auto log in info.
I've tried repairing disk permissions
I've gotten advice to delete various .plists and data states.
None of this has helped. I feel like I'm working on a computer in the public library. Urrggh!

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

System Wide Paging in CUCM 7.0?

What's the best way to get system wide paging setup in an existing CUCM 7.0 environment?
Thanks!

Hi
Short answer is that CUCM (unlike CUCME) doesnt' support paging / tannoy operation natively.
There are a number of 3rd party products that do provide this. A quick search through this forum will find a thread from a couple of weeks ago where this was discussed.
Link:
https://supportforums.cisco.com/message/3352322#3352322
HTH. Barry

Is Dictionary shortcut Command-Ctrl-D a system wide thing?

I had assumed the Command-Ctrl-D for Dictionary.app is a system wide short cut
It works fine with Safari
But I found it doesnt work in side of a firefox webpage. Pressing the combination doesnt bring up the expected floating dictionary window. Or the floating windows does not appear where appropriate (ie. where the mouse cursor is hovering at)
Anyone has a solution?

I've had better luck setting up ctrl-command-d as a service. Same Keyboard Shortcuts preference panel, but pick Services instead of Application Shortcuts from the left menu. Easiest to access it via any apps's Services submenu. Scroll down in the list on the right for the Searching section, and double-click on the shortcut (or empty space) to the right of "Look Up in Dictionary", then enter your shortcut.
If it's going to work in a given app, the new shortcut will appear to the right of the Dictionary command in the app's Services menu. No shortcut; no workies.
Haven't tested it with many apps, but in the ones I use I tried command-D and it didn't work in them all; had to use ctrl-command-d (even in Pages, which has nothing else occupying the command-d shortcut).
Apple should cleanup their messy shortcuts functions and UI. Alas, it's probably a lost cause since there aren't standards for shortcuts among apps. In fact, don't get me started on the hopelessly antiquated keyboard input device...

Global (system-wide) hotkey with Powershell

Hi, i have a winform which is minimized/or hidden and would like to make it appear with a global (system wide) hotkey. (see bogus "new-hotkey"-cmdlet below)
[void][System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
$form1 = New-Object 'System.Windows.Forms.Form'
$form1.ClientSize = '300, 250'
$form1.windowstate = "minimized"
# -- bogus(!) code --
$hk = new-hotkey -scope Global -keys "Ctrl,Shift,Z" -action ({$form1.windowstate = "normal" })
$form1.ShowDialog()
I searched the web intensively but only found C# solutions, which i could not translate into powershell (v3). I tried but it did not work:
http://stackoverflow.com/questions/23855928/acessing-c-sharp-code-in-powershell
The trouble is: even if i manage to use some C# code in my script, because i do not understand C#, i can't debug it.
I tried a few third-party tools, like WASP, Pseventing, Autohotkey, but they all have disadvantages or did not work correctly, so using C# in Powershell is seemingly the way to go.
I'm sorry, cause i know its not appreciated, but i need a working solution, not just tips how the get started.
thanks a lot, Rob

http://www.fluxbytes.com/csharp/how-to-register-a-global-hotkey-for-your-application-in-c/ shows the basics of how to accomplish this, by using the Win32
API RegisterHotKey function (which you've already found, by the looks of your StackOverflow post.) Converting this to run PowerShell code in response to the hotkey might be a bit complicated, and also unnecessary in your case (since you seem to just
want to change the value of a property on the form, you could do that right in the C# WndProc method, or whatever it calls in response to your hotkey.
To make something more generic which can cause PowerShell code to execute, I'd probably have the form raise an event in response to the Windows message. Then PowerShell scripts can use Register-ObjectEvent to respond to it, and you don't have to worry
about problems with threads or runspaces (since the PowerShell engine already takes care of that for you when you use Register-ObjectEvent.)

File Type Associations Do Not Stick System-Wide CS4

When I set File Type Associations for PSD, Tiff, DNG and Jpeg fles in Bridge CS4 so that my files will open in PS CS3 (and insure that the same file associations apply in Bridge CS3), this works as it should from within CS4 and CS3, but it is impossible to introduce a system-wide change in Mac OS 10.5.5 via File-Info. It always reverts to CS4 for these file types, if I try to 'modify all'. The same thing happened when I upgraded from CS2 to CS3.

If File Type Associations are set properly in the Bridge preferences, the default setting can be made to open files in PS CS3, with CS4 installed. This works from within CS3 and CS4. However, it sometimes happens that one is in the Finder, and the default remains PS CS4, however much one tries (via File-Get Info) to modify the default system-wide settings so that these files open in CS3. In any event, a bit invasive. Of course, if I could get comfortable with the Adjustment Layer Panels, all this would be unnecessary, but for the moment, there appear to be too many clicks, and it is going to take some time, so I don't want to burn bridges. Perhaps there is also some ambiguity in my mind as to what the pointing finger in the new Curves dialogue box, much like a tolling bell, is trying to tell me.
But thanks, once again Anne, for your good-natured help.

System-wide spell check will not work

Hi,
I can't get the system-wide spell check to work on my MacBook Pro with the Command + Shift + ; (semicolon) keys. Does anyone know of a solution to this problem? The Spell-Check on the Fly will work.
Thank You,
Guy

I was able to zap the pram and that solved the problem.
Guy

ITunes 10.7 crashes all apps on Mountain Lion including Force Quit. First system wide prob with an apple computer since OSX introduced. Any ideas?

updated to iTunes 10.7 from app Store last night. After the update, iTunes opens then stalls with the "spinning pizza wheel". Force Quit is unresponsive and will not shut it down. If I then open other applications say Safari for example, the problem migrates over to Safari and it similarly stalls and becomes unresponsive. The only way to solve the problem is to manually shut the computer down. This is the most significant problem I have experienced on an apple computer since OSX was introduced because it impacts on Force Quit which means that you have to shut the whole deal down. There are obvious problems for use of Apple TV and apple store etc. ! I am running mountain lion 10.8.1 on a 27" iMac with 2T Time Capsule connected wirelessly. How do I downgrade iTunes back to 10.6? I had no problems with Mountain Lion or iTunes up to that point.

this is the exact same problem i've been dealing with for the past 2 days. after i installed itunes 10.7 for my iphone5 it would crash my mbp's lion system wide. i tried every solution i could find on google and i've actually had to reinstall lion & time machine my backups because of it. right now i'm too scared to redownload itunes 10.7. i actually feel like waiting for the "new itunes" that comes out in october.

Is there any way to create a system-wide variable?

Hello IDM gurus.
Is there any way to create rarely changing system wide variables that can be loaded at system startup that will be available to all users? For example, at IDM system startup, the variables would be read from configuration or generic objects and live in memory for ALL users as opposed to each workflow/user having to read the same variables when the workflow is run.
Any help would be appreciated.

That may very well be the answer I'm looking for. Is there a way for that to be available within the entire application instead of having to read it in each workflow?

Setting ALSA sound card system wide (rather than just in KDE)

Hi,
I've got an HTPC with an ATI Radeon HD 4350 graphics card running Arch x86. It has its own integrated sound card for outputting audio via HDMI, which is detected by ALSA as a separate device. I've managed to set it as the default audio device in KDE 4 (via System Settings). This allows applications such as Amarok and SMPlayer to properly output audio to the HD 4350's integrated sound card, but software such as Flash and MPlayer (from the command line) are still outputting audio to the motherboard's built-in sound card. How can I change this setting on a system-wide level? I've tried running alsaconf as root and adding
pcm.!default {
type hw
card 2
device 3
to ~/.asoundrc; I got the card and device numbers from aplay:
[htpc@exia ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
Here is the output from MPlayer when I try to play a video, complete with errors regarding audio:
MPlayer UNKNOWN-4.4.0 (C) 2000-2009 MPlayer Team
137 audio & 296 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /tmp/FlashmvWXPy.
libavformat file format detected.
[flv @ 0xac7d250]skipping flv packet: type 18, size 294, flags 0
[lavf] Video stream found, -vid 0
[lavf] Audio stream found, -aid 1
VIDEO: [H264] 854x480 0bpp 29.970 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding)
FAAD: compressed input bitrate missing, assuming 128kbit/s!
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio))
==========================================================================
[AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '2'
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:3985:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
[AO_ALSA] Playback open error: No such file or directory
[JACK] cannot open server
[AO SDL] Samplerate: 44100Hz Channels: Stereo Format s16le
[AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '2'
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
[AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name
[AO_ALSA] alsa-lib: conf.c:3513:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
[AO_ALSA] alsa-lib: conf.c:3985:(snd_config_expand) Evaluate error: No such file or directory
[AO_ALSA] alsa-lib: pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
[AO SDL] Unable to open audio: No available audio device
DVB card number must be between 1 and 4
AO: [null] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 854 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 854x480 => 854x480 Planar YV12
Thanks!
Last edited by w1ntermute (2009-06-28 18:40:03)

whoops wrote:Do you use the motherboard sound-card?
No.
whoops wrote:If not - did you try just turning it off in bios (or blacklisting the driver)?
No, I haven't tried that. I'll give it a shot. Thanks for the tip!
Last edited by w1ntermute (2009-07-02 18:11:53)

Non-system wide DNS Lookups on RBL (i.e. logical groups supported)

Sun Java System Messaging Server documetation seems to state that RBL filtering can only exist in one of three files that are used for filtering based off of inbound connection IP address. My question is, can conditional execution occur for a section of one of these files based of destination e-mail address?
I'd like to have multipule levels of e-mail filtering using RBL and allow users to be assinged to the level of filtering they desire by joining a logical group which will enable a level of RBL filtering for that logical group.
Any help is greatly appreciated, as far as I can see, I can only have one system wide filtering set, so I can't possibly have one set of e-mail ids using 10 RBL (remote black lists) and another group e-mail ids using a smaller set of RBLs.
======= From the documentation =======
MAIL_ACCESS : Used to block incoming connections based on combined information found in SEND_ACCESS and PORT_ACCESS tables: that is, the channel and address information found in SEND_ACCESS combined with the IP address and port number information found in PORT_ACCESS.
ORIG_MAIL_ACCESS : Used to block incoming connections based on combined information found in ORIG_SEND_ACCESS and PORT_ACCESS tables: that is, the channel and address information found in ORIG_SEND_ACCESS combined with the IP address and port number information found in PORT_ACCESS.
PORT_ACCESS : Used to block incoming connections based on IP number.
====================================

Alas, the RBL stuff is done before iMS even knows who the message is addressd to. That stuff is done at the initial connection phase, as our philosophy is to reject a message just as soon as possible . . .
After the message is accepted, then you can opt-in/out for things like spamassassin, brightmail, etc.

W2K8 & Win7 - Setting system-wide Trusted file locations not working

Win 2008 Network, Win 7 workstations.
RE: Setting system-wide trusted file locations
I have an application using Flash stored on a network location that accesses other files in the same location. This causes the security warning "The following local application... is trying to communicate with this internet-enabled..." I can add the location to the trusted sites in the Setting Manager and the warning goes away. It is not practical however to do this on every machine on the network. I have tried the FlashPlayerTrust directory and mms.cfg file and neither of these seem to work. Is there a trick to getting the FlashPlayerTrust directory to work properly. If I could get this working, I could create a script that copies this file to all machines on the network.
Any help you be greatly appreciated.

Hi Todd,
Can you please provide just a little more detail?
* When you say "accessess", what API is being used? Are the paths to the other files relative, file: URI http: URI, other?
* In the FlashPlayerTrust directory, are you using the same path notation as appears in the Settings Manager? What's a sample {filename}.{ext} being used?
Thanks!
-Erica

System wide search...

Similar Messages

Maybe you are looking for