System won't boot properly (MSI 790FX-GD70)

Board - 790FX-GD70
CPU - AMD Phenom II Multi-Core Processor
RAM - 4GB OCZ DDR3 OCZ3G1333LV4G
Video Card - Radeon HD 5770
Power Supply - 750W OCZ Fatality
When I start the comp, the MSI logo appears, then onto the Windows XP loading screen, and when it's supposed to go to the Windows login page my screen goes blank. This only happens when I try to start up Windows normally but I can view everything in Safe Mode.
I'm a huge noob at this so please bear with me. Any help is greatly appreciated.

Did it ever work?

Similar Messages

How to set 1600 timmings on MSI 790FX-GD70

This is how and these are the settings that I use to achieve stable 1600 timings on my OZC Black Edition Ram using the MSI 790FX-GD70 board.
OCZ AMD Black Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) OCZ3BE1600C8LV4GK timmings CL 8 8-8-8-24 1.65volts
Restart computer, Boot into BIOS by pressing "delete" until you see the screen say it is going into the bios. When changing settings in bios use the plus and minus key to make changes.
Select Cell Menu, this is the memory menu where you will adjust most of the timings for your memory
Go into Advanced Dram
Set the following timings settings for your RAM When selecting both you have to scroll down the page and set the same timings for the other dimm. So you are setting one set for one RAM and one for the other.
In the picture I have it set for 2T but I use 1T, 1T is faster but I am showing you the default spec settings of the ram, once complete hit esc and back to the cell menu
continued

I would like to point out that I have my CPU overclocked so that is why I have turned the cool n quiet off. You will also note that some of my numbers are not set at 2400 and that they are a little bit above what I have wrote. This is caused by me trying to get a little more out of my CPU overclock. These settings and multipliers interact with each other so if I set a multiplier at 12 and it shows 2400 but then go and set the FSB frequency a little higher the timing will reflect in the HT link. One note, you can not have your CPU-NB Freq lower then your HT Freq. Just wanted to explain that so you know why my numbers are not exact or a little different from the settings I am showing
Do not replicate my settings for the CPU as they are all different for all systems. I am only showing you the memory settings that you can set from the OCZ 1600 settings that they recommend.
Press escape and hit F10 to save your settings and the computer should post with the timings that we set.
Once you are stable you can then go in and try different settings of your own. Most people will try tighter timings which could relate to 7-8-8-8 or 7-7-8-8 etc. You can experiment once you are stable with the stock 1600 settings.
Your bios should have a User settings section and you can save your settings in their so if you are experimenting and you have to re-boot you can easily load the saved settings that we have done here!
If you mess things us and have to reset the cmos you unplug the maching, wait at least 1 minute and then press the cmos button. Plug machine back in turn power supply back on and the computer will tell you it has an error and to press F1. Press F1 and set the clock, then go into user settings and load the settings that we did here. If at anytime you want the original settings go into bios and select optimised settings and it will load the best settings that it uses to operate. Note that your overclocks and your ram will go back to default settings and any bios settings that you did manually will be gone until you reload them in user settings. If you update your boos, user settings are lost and you would manually have to set the timings again like we did here.
Many ways to go about this and this is the way that I use. I am not saying it is the only way or the best but it does work. I am using stock volts on the CPU and recommended volts for the memory and to raise the NB Freq. Constructive comments are very welcome.

Network problems with MSI 790FX-GD70

Hi All
I have a problem with the onboard network cards.
It only works the first time from cold boot (when the powercable is completly disconnected from the PC, and LAN cable disconnected, turn on PC and then connect LAN cable)
If I shut it it down or restart the computer, then the LAN card disconnects, eg no lights active on either the pc nor the router. But if I do the procedure described above everything works ok again.
Same problem occours with both LAN ports.
My system:
MSI 790FX-GD70
AMD 720BE
4GB Corsair 1600mhz DDR3
2x Asus HD4850 Crossfire
2x Samsung t166 320GB HD
Windows XP SP3
Tried 3 different routers but all with the same error. So everything points towards the motherboard.
Please help.
PearsonDK

Quote from: Fredrik on 09-August-09, 06:19:22
If the LAN-card is disconnected I wonder if the LAN-card is "present" at all. Check Deceive Manager. Please give some PSU info. Problematic booting and falling out devices...
Also, please, what is your BIOS Version? Make sure its 1.4 .
Drivers - have you downloaded the latest ones from MSI's site and installed them for the LAN card?
Man.. is it me, or have there been like 6-7 people coming up with similar LAN issues on this board? I've never known an onboard NIC to have issues.

SOLVED:MSI 790FX-GD70 Freezing probelms?

I recently bought the msi 790fx-gd70 board, along with a amd athlon 2 x2 240 cpu, and 1 stick of kingston hyper x ddr3 1600 2gb ram, now my problem is that the computer keeps halting/freezing at random. I may get 10 minutes without a freeze or it may freeze on boot. I know that the cpu is supported, the bios is at v1.4 and according to the cpu support list, that is fine. Now on the other hand the memory isnt, the code for my memory is KHX1600C9D3/2G. Now i have seen that other kingston memory is supported, eg. the KHX1600C9D3K3/2G. Has it somthing to do with my mem been single channel as opposed to dual channel. 1 stick vs 2. i cant work it out, so that why i posted here, in hope that someone could shed some light
My full system specs are as follows.
AMD ATHLON 2 X2 240
KIGSTON HYPER X 2GB DDR3 1600 CL9 DIMM
MSI 790FX-GD70 MOTHERBOARD
RADEON HD3870 512MB GPU
RAPTOR HDD 150GB
CORSAIR HX620W PSU

Ok back again..lol. After changing a few bits of hardware that i could (graphics card, hdd) (Just thought i would try everything possible before rma'n the ram) I was still plauged by the rebooting, but... i was faced with a
" hypertransport sync flood error" at boot. Which threw me rite of course, now after doing a bit of google'n i found a few people have had this problem with certain msi and asus boards. But what does this mean is wrong, does it still indicate a ram issue or is it now a bios/mb issue? Im so close to rma'n the whole lot and going back to my old rig (at least it worked) I will only rma the ram if i am 100% sure it will fix my problem, no point in wasting money if it wont solve anything.

Memory Advise for MSI 790FX-GD70

Whoever may help,
Hi all, i'm trying to build a computer, i have all except the memories, im intent to go to 8GB DDR3 1333mhz but i dont know which brand/memory is compatible for this board. if anyone could help me in this i would appreciated.
Thank you.
my system spec is:
MSI 790FX-GD70
Phenom II X4 Quad-core 910 2.6GHz Processor
ARCTIC COOLING Freezer 64 Pro
Antec TP-750 750W Continuous power
Antec Twelve Hundred with extra cooling fan tricool
SAPPHIRE 100243-1GTXSR Radeon HD 4870 1GB
LITE-ON Black 22X DVD+R SATA
Western Digital Caviar SE16 WD3200AAKS 320GB SATA 2x order

Main Memory
• Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600*/1800*/2133* (OC) SDRAM, 16GB Max
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1740
Quote
but i dont know which brand/memory is compatible for this board.
That most depend of the CPU used, since memory controller is there.
You can see memory test report here ==> http://global.msi.eu/uploads/test_report/TR10_1740.pdf

Mac won't boot properly unless in safe mode

Recently I updated my MacBook Pro to OS X Yosemite. I then started the process of the data encryption.
I don't know what happened, but maybe the encryption failed, because now every time I turn my mac on, it won't boot properly unless it's in safe mode.
Either it will have a black screen with a visible cursor, or just the desktop with no dock or the bar along the top and no icons, or it does boot up properly, but works extremely slowly. Like if I was to press the apple symbol on the top-right of the screen, it would take 5 minutes to actually open it. Nothing works properly.
And so I opened up my system preferences, and discovered that the Encryption is stuck on half-finished. But I can't stop it. If I try to turn encryption off it says I have to wait till it's finished. But it never does, the progress bar never moves.
If I open System Preferences while in Safe Mode, the progress bar for Encryption is grey, and underneath it says "connect to power to continue encryption". But it IS connected to power.
Have I stuffed my Mac? Is there a way to get it working again?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

MSI 790FX-GD70 Randomly Freezing

Hello,
I have a really strange problem with this card.
I get random freezes usually whilw browsing and I have to reset my computer.
My setup is:
AMD Phenom II 955 X4 BE
MSI 790FX-GD70
Corsair XMS3 4x2GB 1333MHz (there are two sets 2x2GB TW3X4G1333C9A G)
Connect3D Radeon HD 4850 512 MB
Corsair TX 650W PSU
I've checked Memory running Memtest and it's ok.
Any suggestion?

I've already checked that too.
I get 2 messages just after I reset my system.
1st is an Error:
Quote
Event 6008, EventLog
General
The previous system shutdown at 7:26:34 μμ on ‎25/‎3/‎2012 was unexpected.
Log Name: System
Source: EventLog
Event ID: 6008
Level: Error
User: N/A
Op Code:
Logged: ‎25/‎3/‎2012 7:28:42 μμ
Task Category: None
Keywords: Classic
Computer: AMD-955-X4
Details
EventData:
7:26:34 μμ
‎25/‎3/‎2012
974
DC0703000000190013001A0022009C00DC07030 00000190010001A0022009C003C0000003C0000 000000000000000000000000000000000001000 00000000000
Binary data:
In Words
0000: 000307DC 00190000 001A0013 009C0022
0008: 000307DC 00190000 001A0010 009C0022
0010: 0000003C 0000003C 00000000 00000000
0018: 00000000 00000000 00000001 00000000
In Bytes
0000: DC 07 03 00 00 00 19 00 Ü.......
0008: 13 00 1A 00 22 00 9C 00 ....".œ.
0010: DC 07 03 00 00 00 19 00 Ü.......
0018: 10 00 1A 00 22 00 9C 00 ....".œ.
0020: 3C 00 00 00 3C 00 00 00 <...<...
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 00 00 00 00 ........
0038: 01 00 00 00 00 00 00 00 ........
2nd is a Critical:
Quote
Event 41, Kernel-Power
General
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Log Name: System
Source: Kernel-Power
Event ID: 41
Level: Critical
User: SYSTEM
Op Code: Info
Logged: ‎25/‎3/‎2012 7:28:34 μμ
Task Category: (63)
Keywords: (2)
Computer: AMD-955-X4
Details
EventData:
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0
But these are errors you get if you reset your system using reset button.
They can't help you identify what made system freeze.

How many ATA drives can I install in an MSI 790FX-GD70 AM3 motherboard?

I have a MSI 790FX-GD70 AM3 motherboard ordered with an AMD Phenom II X4 965 processor to upgrade my current machine.
In my current machine I have two ATA drives. Will I be able to install both of those ATA drives on that MSI 790FX-GD70 AM3 motherboard or will it accept only one?
I plan on replacing one of the ATA drives with a SATA drive later, but I'd like to hold off until after Christmas. If not, I'll just have to get by with one drive for a while.
Thanks
John

Quote from: Bas on 29-November-09, 05:41:33
You can always add a ATA controller card to extend it.
How much do you need?
BTW, ATA = Serial-ATA or Parallel-ATA = ATA
There is no such thing as an ATA but or and (E)IDE bus.
Many use the wrong naming including MSI.
OK. Now if I understood Hans correctly, the board has one PATA-connector. To that, I can connect 2 PATA-devices.
Now here is a picture of my device manager:
Can I connect those two Western Digital drives to the PATA connector?
Bear with me. I'm trying to figure this out.

System won't boot-no chime.

Despite repeated attempts and resetting the CUDA button, the system won't boot when start button is pressed. In the first few seconds it seems to make normal sounds; but no chime and settles into simply fan noise. This is true even if using C (with an Install CD). or Shift key. Is there anything else I can try? (I know it's actually a G3 B&W Motherboard; but I had nowhwere else to post it)

I do not remember exactly what was happening when it stopped. It may have been executing something , hung up, and wouldn't respond to the Command-Opt-Esc or I do remember one incident when it was booting up and stopped when it was partly thru "searching for local discs.
I checked the ref. article and tried to measure the voltages on the power connector. I was never quite sure what pin was what, since the colors did not jive with those in the article. At any rate 2 were approx. + 5 V (one was 4.85), the rest were essentially zero (I believe 1 or 2 were about 300 mv). I did notice that when the power connector is reconnected and start up is attempted, 3 little green lights come on on the motherboard. One goes off after a while.
I have tried the old Sonnet upgrade and have tried reseating all the RAM modules. All to no avail.
The Hard drive and all other parts seemed to be working fine prior to the failure.

System won't boot. INIT: No inittab file found Enter runlevel:

After the latest update that changed how intel ucode is updated, my system won't boot.
I think I missed a line when I edited "/etc/grub.d/10_linux" and ran grub-mkconfig -o /boot/grub/grub.cfg.
Any ideas on how to fix this?
I can't run grub-mkconfig from another machine, as it uses the live kernel info.
Any help would be greatly appreciated. Otherwise I'll have to reinstall

TheSaint wrote:
SyXbiT wrote:
But I still get the error:
system won't boot. INIT: No inittab file found
Enter runlevel:
It seems to me that you've an old Arch version. inittab is deprecated AFAIK.
What is the Arch iso version?
That would probably be mid-2012 at the very latest I think as that's when I remember completely moving over to systemd...
@SyXbiT: Are you using the current Arch install ISO?

System won't boot up

Help please. I have a kt6 delta running an athlon 2700+ xp chip, 512 mb ddr 400.
When I set the fsb at the correct speed for the chip (166) the system won't boot hard drive led lights up constant. dvd drive and cd-r drive each run but the system won't boot. system seems to run fine at default and 133 mhz but the chip is incorrectly identified in windows (xp pro sp1) Any Ideas whats wrong?

Hi - I have the same board with the same processor, I have not problems rebooting after changing the bus speed. But I have had problems rebooting after adding in any card PCI or AGP. the system seems to have trouble clearing the Cmos, I would try clearing the CMOS with the JBAT. it doesn’t always seem to work but I have had some luck, though I have also pulled out the battery a couple of time too..
Good luck!

Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

Upgrade from snow leopard 10.6.8 to montain lion on a iMac system won't boot getting a crossed out circle

Clean install OS.10.6.8 update it completly. May be you ignored some firmware update.
I have two incedents.
My thunderbolt port stopped working after upgrading to ML 10.8. I booted from external 10.6 , 10.7 still didnt work. Then i clean installed 10.6.8 and ran software update it updated the thunderbolt firmware and all is well now. This firmware update for some reason didnt show up in ML 10.8.
Secondly , when i upgraded my Brother's Macbook from 10.5 to 10.6.3 it would install but stuck with crossed out circle. Then i downgraded checked for update found an efi update , then the 10.6.3 worked fine.

[SOLVED] Switch to systemd - Now system won't boot

I saw that todays update upgrade included the installation of systemd. I looked the wiki and did the necessary changes (I already had made the /etc/hostname etc. files). So I added the
init=/bin/systemd
line to grub and now my system won't boot. I get an error saying something about syslog service not enabled and then a black screen. I can boot my machine fine without the "init=/bin/systemd" line but I want to run a pure systemd system since Arch is moving to it anyway. In the wiki it mentions to install systemd-sysvcompat but it conflicts with initscripts it says. What am I doing wrong or missing?
Last edited by fettouhi (2013-12-08 14:42:04)

fettouhi wrote:
Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
when I try to enable alsa and dbus I get this
[root@andre ~]# systemctl enable alsa-store.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable alsa-restore.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable dbus.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

PC won't boot. MSI Gaming 7 motherboard had a debug code of 67.

PC won't boot. MSI Gaming 7 motherboard had a **debug code of 67**.
I ran Malwarebytes this morning, it found some stuff, I had it remove them and rebooted. Haven't been able to get my PC to boot since :(
When I begin booting, nothing happens at all on the monitors, the PC itself has power and it looks like it's on but I only get this error code 67 on the motherboard and that's it.
Really don't want to unseat the CPU for any reason to troubleshoot that. CPU is always a pain in the ass for me to remove and place back into a PC. lol.
Specs:
PC:
* Windows 8.1 Pro 64-bit
* Rosewill THOR V2 Case
* EVGA GeForce GTX 970 FTW Edition GPU
* Thermaltake NiC C5 CPU Cooler
* Rosewill SSD/HDD Mountaing Kit with 60mm Fan
* CORSAIR Vengeance 16GB RAM
* CORSAIR HX850i 850W Power Supply
* Intel i7-4790k CPU
* MSI Z97-Gaming 7 Motherboard
* Samsung 840 EVO 120GB SSD
* Western Digital Blue 1TB Drive x 3
Audio:
* Blue Yeti Mic
* Rode PSA1 Mic Boom Arm
* Audio-Technica ATH-M30 Headphones
Networking:
* Cisco Linksys EA4500
* Motorola SURFBoard SB6121
* CAT 6 Ethernet Cables
Peripherals & Misc:
* PS4 Controller
* Razer Naga 2014
* ASUS VS278Q-P 27" 1ms Monitor x 2
* HP 23" S2331 x1
* Logitech C920 Webcam

Quote from: Svet on 04-June-15, 22:06:26
try >>Clear CMOS Guide<< with power cord removed
Tried that, didn't work.
Unseated each RAM stick, didn't work.
Removed the CPU, cleaned off the thermal grease, reseated it, replaced grease and heatsink. Didn't work.
Literally unplugged and replugged everything in one by one and none of it fixed the problem. Still receive error code 67.
Have no damn idea what the heck is going on.

My Sleek won't boot properly! Stuck on Recovery/Rescue m

Each time I boot my Zen Sleek it either goes to the rescue mode or it just locks up on the Creative logo. I've had it for a few months and this is the first time it seriously locked up on me. I hard reset it on the bottom and it's still the same. I tried to run Disk Cleanup through the rescue mode and it doesn't even run it!! I don't know what's going on... Yesterday it was playing like a beauty.

?Re: My Sleek won't boot properly! Stuck on Recovery/Rescue mode?
MRM wrote:
I appreciate your help, but you should read my post first. I don't need to go into rescue, I need it to NOT go to rescue. I tried formatting and it says HDD problem...ugh
Your hardri've has died. You can replace it Insrtuctions for opening here. http://www.youtube.com/watch?v=TWT8W...eature=channel? Place to purchase here? http://www.thegadgetdr.com/Zen-Sleek-or-Sleek-Photo-20GB-Hard-Dri've-p/zs-20gb-hd.htm ? & ? http://cgi.ebay.com/ws/eBayISAPI.dll...item=350225256? Here this is a larger size dri've but will fit & you will need the tools to open it those here? http://www.thegadgetdr.com/iPod-Zune...-Tools-s/8.htm

System won't boot properly (MSI 790FX-GD70)

Similar Messages

Maybe you are looking for