System won't load after startup repair - Satellite A500

Hi guys,
I've got a problem with my laptop. I shut down my laptop directly by switching off from the switch. After I start the laptop the system recommends startup repair but it was unable to repair and after that it just went up to the welcome page and it won't load anymore.
Do anyone have any idea what is the problem?
Thank you

hi plioe,
can you run chkdsk on the hdd?
do you hear unusual sounds from the harddisk?
it seems that your harddisk has some problems...
this causes a slow startup or failure to boot...
but to be sure a recovery is recomended in some cases the software configuration went bad...

Similar Messages

System won't load from startup

Nothing happens past the diagnostics part of startup. Screen shows "windows did not start properly last time" message and gives options. None work and when the countdown finishes to "load windows normally", system freezes.
The recovery disc supplied only allows hard drive to be formatted and reinstalled but I have all my music, photos and other work, including important emails, on the laptop and haven't got a back up.
How can I start windows from a CD so I can take off my docs onto an external hardrive before formatting? PLEASE HELP!!!

Hi Julian,
Your simplest option would be to remove the hard drive from your notebook and install it into a USB caddy which you could then attach to another PC and copy off your data. You could then just reformat/reinstall your system using the recovery CDs.
If you have access to a genuine Microsoft installation CD then you could try to boot from that and try to repair your existing OS but I don't think you would be able to copy your data using that technique.
Finally you could use a bootable CD from one of the commercial backup/restore utilities (such as Norton Ghost, or Acronis True Image) and try to offload your data to an external medium using that utility.
regards,

P35 platinum ms7345, system won't load OS, stops at msi splash screen

motherboard in question is a p35 platinum ms7345
system won't load the OS, stops at msi splash screen, can't get into bios.
LED code stops at G-R-G-R "Testing Base and Extended Memory"
this is a system that I built over 8 months ago. the only thing I
did was upgrade the cpu to a E8400( from a e6750). I had no previous
problems. but after the upgrade. I first received an error
= attempt to overclock failed = ( cant quote but as I remembered it)
press any button to reset bios.( I have received this message before with the old cpu but with a restart the system went on as normal). After the system restart, it just sits on the splash screen. I never attempted
to overclock the memory. the jb1 & jb2 jumpers are on 1 & 2 pins(same way it
came from newegg). I tried to use different memory( in all of the slots) same outcome.
I unplugged
all other hardware except vid card> same outcome. I even used a different
vid card> same outcome.
system specs
core 2 e8400
msi p35 platnum
2gb(2x1gb) adata ddr2 800
any suggestions? I appreciate any help. I hope the board isn't finished
thanks in advance
NFIXIT

There are three possible solutions to solve the situation:
1) Install a processor supported by the current BIOS Version to be able to properly turn on your system and then update the BIOS to the latest Version to be able to use your E8400/E0 (update should be done from DOS only).
2) Ask in a local computer shop or contact your reseller to do the same thing for you.
3) Connect an internal floppy drive and a PS/2 Keyboard and then try to force the system into AMI BIOS Recovery Mode. Instructions:
Quote
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A7345IMS.1xx to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.
Even though the AMI BIOS Recovery Procedure is the only chance you have to solve the situation without installing a different processor, it does not work in all cases. However, as it is an easy procedure, it is at least worth a try.

Cannot boot from Windows 8 notebook - Error: Operating system version is incompatible with Startup Repair

Hi all,
I have searched through forums, but could not find the solution to my problem:
I have a notebook ASUS with Windows 8 preinstalled.
Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
Afterwards I have not been able to boot into Windows.
CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
Thanks for reading

Hi,
Any update here?
I agreed with the others. First, if we have any backup available to restore Windows 8.1, we may take use of that.
If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
Best regards
Michael Shao
TechNet Community Support

My apps won't load after updating to iOS4.3.2. What to do?

My apps won't load after updating to iOS4.3.2. What to do?

Yes, I tried that (thanks for the suggestion, though!). In my music app, when I click on certain songs, the screen moves to try to start the song, but then it bounces back to the menu screen without playing the song. On many albums, when I click on the first song, a song about halfway through the album will start to play rather than that first song. My other apps seems to be fixed, but not the music function.

Lightroom 5 won't load after 30 day trial of Lightroom3 error.

I tried the 30 day trial of Lightroom 3 that I got with the Photoshop Elements 10 when I got my new computer. The Lightroom loaded one picture and said I had an error and would try to find a solution. I bought Lightroom5 and tried to install it and it keeps going back to the error of Lightroom 3 trial. I tried to delete all programs associated with Lightroom and reinstall, but nothing happens.

it just reads "Lightroom-Opening Catalog:New Years Day 2014 031.JPG.Ircat assertion failed!
New Years day 2014 is a folder and 031 is the picture in the folder that I tried to enhance in the 30 day free trial of Lightroom 3. I bought Lightroom 5 from B &H and it appears to be hung up on the Lightroom 3 trial.
kglad <[email protected]> wrote:
kglad http://forums.adobe.com/people/kglad created the discussion
"Re: Lightroom 5 won't load after 30 day trial of Lightroom3 error."
To view the discussion, visit: http://forums.adobe.com/message/6048439#6048439

Old emails won't load after upgrade to Mountain Lion

old emails won't load after upgrade to Mountain Lion

See if anything in here will fix it:
1. Hold down the Command and Option keys as you click the iPhoto icon.
The Photo Library First Aid window opens:

I tunes store won't load after 11.1.3 update

I Tunes store won't load after i updated itunes . Its the 11.1.3 update

Hello Papamax,
And welcome to Apple Discussions!
Have you ran an iTunes *Network Diagnostics Test* yet? If not, use the steps provided in this Apple support document to do so, and then paste your results here.
http://support.apple.com/kb/HT3204
Also, try temporarily disabling McAfee and see if that helps. And make sure you have allowed iTunes through its firewall, by using the instructions provided in this article.
http://www.technipages.com/allow-program-access-through-mcafee-personal-firewall .html
And lastly, see if any of the troubleshooting steps provided in this Apple support document can assist you.
[iTunes for Windows: iTunes Store connection troubleshooting|http://support.apple.com/kb/ht1527]
B-rock

IBook G4 won't load after latest security update, repair doesn't work?

Hi I had the same problem as someone else in this forum:
"Last night I saw that my ibook G4 wanted to do a security update. I told it to do it, and the ibook has not started since. It reset itself after downloaded, but it just stays on the booting up screen, never actually booting up so I can use it. After about two hours of trying to boot up, I turned it off, and on again, and it still wont boot.
I really need suggestions as how I can fix it. Thanks
ibook g4 Windows 2000
Carolyn Samit
Posts: 8,431
From: Alameda CA Bay Farm Island
Registered: Aug 5, 2005
Re: G4 wont boot after latest security upgrade
Posted: May 22, 2009 2:51 PM in response to: voiletmay
Click to reply to this topic Reply email Email
HI,
Ok... you need to boot from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If you cannot boot from your install disk, try booting in Safe Mode
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
If you have the original hard drive in this iBook, it was probably a 60GB drive? When you can do this, check to see how much available disk space there is.
Right or control click the MacintoshHD icon on your Desktop, then click: Get Info. In the Get Info window, click the discovery triangle so it's facing down. You will see; Capacity and Available Make sure you have 10% available disk space, 15% is better. Not enough available drive space can cause issues like you are experiencing.
Carolyn "
I tried restarting it after the repair (there were some things to repair and I tried to repair twice just to make sure it didn't miss anything) but it still won't load. It says its starting the OX system, but when the blue bar reaches the end, it doesn't do anything from there. I also left it on for hours and it did nothing. My mousepad still lets me move around the mouse, the caps lock key still lights up, as the num lock key. I tried safe mode but that won't load either...any other suggestions?

*" I also left it on for hours and it did nothing. "*
Your iBook needs to go in for repairs.
Carolyn

Windows 7 operating system won't load Photoshop CS2?

I've purchase a new computer with Windows 7 operating system. My photshop CS2 won't load. I've
tried adobe support. They said I have to upgrade to Photoshop 3 or 4 unless you have a s
olution here. If you don't can I just purchase the upgrade and if so, how can I get the upgrade
on my new computer if the originals won't load.
JW

Hi, and welcome to Apple Discussions.
Try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out. If Safe Mode doesn't work for you, post back and we will explore other options.

Help! Laptop won't start up- startup repair goes to black screen!

Hi! Just wondering if anyone can help me with my toshiba laptop C650-152! I was online yesterday when my laptop froze and in the end i had to turn it off by cutting the power source! Today I have tried to turn it on and It keeps going to a black screen with white writing which asks if I want to Start it normally or do startup repair! If I press start normally it gets me to the windows start up screen (with the coloured logo) but then gets stuck there. If i press start up repair it goes to a black screen with a White mouse cursor and gets stuck there too! I can use a laptop just fine but am pretty clueless when it comes to technical matters so if anyone could help explain what I should do (in laymens terms) it would be much appreciated!! Thanks in advance for your help! Beth

To burn the disc from an ISO file, Beth, you may need a third-party utility depending on the version of Windows. I use the free BurnCDCC burning program from here.
TeraByte Unlimited Freeware
To use the disc do I just turn my laptop on..?
Something like this. Turn the computer on, load the disc, turn the computer off, start it again and then press F12 to get the boot-priority men, select the optical drive, follow the instructions (like choose a language and a Windows installation), and you're on your way to the Windows Recovery Environment.
Then will a menu appear so I can choose to do a system restore or do I have to search for it? Finally will doing a 'system restore' delete any of my saved data such as photos/music/uni work?
All that was answered at the link I already gave you.
What are the system recovery options in Windows 7?
Click Show All. Under System Restore, click the links What is System Restore and System Restore: frequently asked questions. No data files are disturbed by System Restore.
-Jerry

Safari won't load after 10.3.9 re-install

Here is my history:
-Tried to update OSX10.3.9 with combo download
-Upon re-start machine gets stuck in start up during boot, stuck on blue screen
-then re-start with software install & restore DVD
-go to disk utility, perform Repair Disk in First Aid
-result:diagnosis 'volume header needs minor repair' then 'volume repaired'
-First Aid done it's job I think, on re-start same problem though, stuck during boot.
-Re-boot again with DVD disk, this time perform re-install 10.3.9 archiving all.
-Great, machine starts but Safari won't load.
- I look for /System/Library/Frameworks/WebKit.framework/Versions/A/Webkit as advised on old post on this forum.
- I can't find it on updated system, however it is in my 'Previous System' Folder, I try to copy it over but won't let me because 'frameworks cannot be modified'
Any advise out there about getting Safari started again, I'm dying here without it, got all my links there. Every other programs works fine. Heard something about 'double boot', should I have changed some settings before re-install? Can some one guide me here. Had this baby 3 years, no system problems ever, should never have tried to update, feels like I'm in PC-land arrrr...
Any help hugely appreciated!!!
powerbook G4 Mac OS X (10.3.9)

Welcome to Apple Discussions
Strange the computer hung during the upgrade. Never a good sign. While the computer was upgrading, were you using it for any other task? Was their a power interruption?
When you ran disk repair from Disk Utility, did you rerun the repair function until it showed no errors. If not, do this step again, then on the restart to your main system, repair permissions using Disk Utility in your Utilities folder.
If still no cooperation from Safari, have a look here for guidance regarding a Safari reinstall in Panther. Ignore the 10.4.4 update suggestion. In addition to the various suggestions, make sure you remove Safari from your Applications folder, putting it in the trash.
The installer will download an earlier version of Safari. Once installed, you'll need to upgrade to the final version - 1.3.2. To do so, first install Safari 1.3.1. Then, install Safari 1.3.2. Once complete, "repair permissions" using Disk Utility in your Utilities folder.
Post back with results.

Safari won't load after latest software update

After the latest software update from Apple, Safari won't load. I've deleted the p.list and run OnyX to clean the system. It still won't load. This is a pain as Safari is my default browser and I have to get into Safari to change that. Has anyone else had this problem and fixed it?
Thanks!
Quicksilver G4 Mac OS X (10.4.5) 1.5Gb RAM

Welcome Pauline;
Actually you can change your default browser from within Mail, just go to Mail preferences and set the default browser to whatever you want. Unless you have cloned your system (before the update)which I heartily recommend,
you may have to use Pacifist to extract Safari from
the 10.4 installation package.
Hope this helps,
Miriam

Windows 7 will no longer load after Apple repair

I recently had my computer repaired through AppleCare. They replaced the logic board, top cover, a connector and battery. When I first got the computer back, I turned it on, booted to the Mac partition, everything was good. I then booted to Windows with the Bootcamp partition and everything was good. Even the stuff I had open before the damage were still up. I shut it down, boxed everything up and didn't touch it until I got home.
When I got home, I booted up Windows 7 and now all I get is it boots to a black screen with the cursor. I ran the repair utility, tried safe mode and it says no errors are found, however, it still won't load. I haven't figured out why it booted up the first time I got the computer back but now it won't do anything. I never got a chance to back everything up because my computer was damaged from liquid damage, but I can still see all the files on my Bootcamp partition through finder from the Mac side.
I don't know exactly why it's doing this or what to search to find an answer to the problem. When I first got my MBP, I installed Windows 7 through and upgrade disc from my job, so I don't know what my next steps should be. Sorry for the length, just trying to get this problem resolved. Any thoughts?

Fri Jul 15 00:00:55 EDT 2011: Winclone Launched
Fri Jul 15 00:00:55 EDT 2011: Version 2.2
Fri Jul 15 00:00:55 EDT 2011: ProductName:    Mac OS X
Fri Jul 15 00:00:55 EDT 2011: ProductVersion:    10.6.7
Fri Jul 15 00:00:55 EDT 2011: BuildVersion:    10J869
Fri Jul 15 00:00:56 EDT 2011: list of disks
Fri Jul 15 00:00:56 EDT 2011: ---------
Fri Jul 15 00:00:56 EDT 2011: disk0s1
Fri Jul 15 00:00:56 EDT 2011: disk0s2
Fri Jul 15 00:00:56 EDT 2011: disk0s3
Fri Jul 15 00:00:56 EDT 2011: ---------
Fri Jul 15 00:00:56 EDT 2011: ---------
Fri Jul 15 00:00:56 EDT 2011: Disk Utility Output
Fri Jul 15 00:00:56 EDT 2011: ---------
Fri Jul 15 00:00:56 EDT 2011: /dev/disk0
Fri Jul 15 00:00:56 EDT 2011:    #:                       TYPE NAME                    SIZE       IDENTIFIER
Fri Jul 15 00:00:56 EDT 2011:    0:      GUID_partition_scheme                        *250.1 GB   disk0
Fri Jul 15 00:00:56 EDT 2011:    1:                        EFI                         209.7 MB   disk0s1
Fri Jul 15 00:00:56 EDT 2011:    2:                  Apple_HFS Macintosh HD            163.1 GB   disk0s2
Fri Jul 15 00:00:56 EDT 2011:    3:       Microsoft Basic Data BOOTCAMP                86.6 GB    disk0s3
Fri Jul 15 00:00:56 EDT 2011: /dev/disk1
Fri Jul 15 00:00:56 EDT 2011:    #:                       TYPE NAME                    SIZE       IDENTIFIER
Fri Jul 15 00:00:56 EDT 2011:    0:                            GRMCULFRER_EN_DVD      *2.5 GB     disk1
Fri Jul 15 00:00:57 EDT 2011: =================
Fri Jul 15 00:00:57 EDT 2011:    Device Identifier:        disk0s1
Fri Jul 15 00:00:57 EDT 2011:    Device Node:              /dev/disk0s1
Fri Jul 15 00:00:57 EDT 2011:    Part Of Whole:            disk0
Fri Jul 15 00:00:57 EDT 2011:    Device / Media Name:      EFI system partition
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Volume Name:
Fri Jul 15 00:00:57 EDT 2011:    Escaped with Unicode:
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Mounted:                  No
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    File System:              None
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Partition Type:           EFI
Fri Jul 15 00:00:57 EDT 2011:    Bootable:                 Not bootable
Fri Jul 15 00:00:57 EDT 2011:    Media Type:               Generic
Fri Jul 15 00:00:57 EDT 2011:    Protocol:                 SATA
Fri Jul 15 00:00:57 EDT 2011:    SMART Status:             Verified
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Total Size:               209.7 MB (209715200 Bytes) (exactly 409600 512-Byte-Blocks)
Fri Jul 15 00:00:57 EDT 2011:    Volume Free Space:        Not Applicable
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Read-Only Media:          No
Fri Jul 15 00:00:57 EDT 2011:    Read-Only Volume:         Not applicable (no filesystem)
Fri Jul 15 00:00:57 EDT 2011:    Ejectable:                No
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Whole:                    No
Fri Jul 15 00:00:57 EDT 2011:    Internal:                 Yes
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011: =================
Fri Jul 15 00:00:57 EDT 2011: =================
Fri Jul 15 00:00:57 EDT 2011:    Device Identifier:        disk0s2
Fri Jul 15 00:00:57 EDT 2011:    Device Node:              /dev/disk0s2
Fri Jul 15 00:00:57 EDT 2011:    Part Of Whole:            disk0
Fri Jul 15 00:00:57 EDT 2011:    Device / Media Name:      Customer
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Volume Name:              Macintosh HD
Fri Jul 15 00:00:57 EDT 2011:    Escaped with Unicode:     Macintosh%FF%FE%20%00HD
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Mounted:                  Yes
Fri Jul 15 00:00:57 EDT 2011:    Mount Point:              /
Fri Jul 15 00:00:57 EDT 2011:    Escaped with Unicode:     /
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    File System:              Journaled HFS+
Fri Jul 15 00:00:57 EDT 2011:    Type:                     hfs
Fri Jul 15 00:00:57 EDT 2011:    Name:                     Mac OS Extended (Journaled)
Fri Jul 15 00:00:57 EDT 2011:    Journal:                  Journal size 24576 KB at offset 0x15502000
Fri Jul 15 00:00:57 EDT 2011:    Owners:                   Enabled
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Partition Type:           Apple_HFS
Fri Jul 15 00:00:57 EDT 2011:    Bootable:                 Is bootable
Fri Jul 15 00:00:57 EDT 2011:    Media Type:               Generic
Fri Jul 15 00:00:57 EDT 2011:    Protocol:                 SATA
Fri Jul 15 00:00:57 EDT 2011:    SMART Status:             Verified
Fri Jul 15 00:00:57 EDT 2011:    Volume UUID:              EA2A1380-52C5-3C88-B51A-F9662CD740AE
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Total Size:               163.1 GB (163074539520 Bytes) (exactly 318504960 512-Byte-Blocks)
Fri Jul 15 00:00:57 EDT 2011:    Volume Free Space:        41.2 GB (41153507328 Bytes) (exactly 80377944 512-Byte-Blocks)
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Read-Only Media:          No
Fri Jul 15 00:00:57 EDT 2011:    Read-Only Volume:         No
Fri Jul 15 00:00:57 EDT 2011:    Ejectable:                No
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Whole:                    No
Fri Jul 15 00:00:57 EDT 2011:    Internal:                 Yes
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011: =================
Fri Jul 15 00:00:57 EDT 2011: =================
Fri Jul 15 00:00:57 EDT 2011:    Device Identifier:        disk0s3
Fri Jul 15 00:00:57 EDT 2011:    Device Node:              /dev/disk0s3
Fri Jul 15 00:00:57 EDT 2011:    Part Of Whole:            disk0
Fri Jul 15 00:00:57 EDT 2011:    Device / Media Name:      BOOTCAMP
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Volume Name:              BOOTCAMP
Fri Jul 15 00:00:57 EDT 2011:    Escaped with Unicode:     BOOTCAMP
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Mounted:                  Yes
Fri Jul 15 00:00:57 EDT 2011:    Mount Point:              /Volumes/BOOTCAMP
Fri Jul 15 00:00:57 EDT 2011:    Escaped with Unicode:     /Volumes/BOOTCAMP
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    File System:              NTFS
Fri Jul 15 00:00:57 EDT 2011:    Type:                     ntfs
Fri Jul 15 00:00:57 EDT 2011:    Name:                     Windows NT File System (NTFS)
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Partition Type:           Microsoft Basic Data
Fri Jul 15 00:00:57 EDT 2011:    Bootable:                 Is bootable
Fri Jul 15 00:00:57 EDT 2011:    Media Type:               Generic
Fri Jul 15 00:00:57 EDT 2011:    Protocol:                 SATA
Fri Jul 15 00:00:57 EDT 2011:    SMART Status:             Verified
Fri Jul 15 00:00:57 EDT 2011:    Volume UUID:              D7D509D6-DA2F-4A20-8C17-31EFCEB18674
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Total Size:               86.6 GB (86639640576 Bytes) (exactly 169218048 512-Byte-Blocks)
Fri Jul 15 00:00:57 EDT 2011:    Volume Free Space:        40.4 GB (40407625728 Bytes) (exactly 78921144 512-Byte-Blocks)
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Read-Only Media:          No
Fri Jul 15 00:00:57 EDT 2011:    Read-Only Volume:         Yes
Fri Jul 15 00:00:57 EDT 2011:    Ejectable:                No
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011:    Whole:                    No
Fri Jul 15 00:00:57 EDT 2011:    Internal:                 Yes
Fri Jul 15 00:00:57 EDT 2011:
Fri Jul 15 00:00:57 EDT 2011: =================
Fri Jul 15 00:30:31 EDT 2011: Winclone Launched
Fri Jul 15 00:30:31 EDT 2011: Version 2.2
Fri Jul 15 00:30:31 EDT 2011: ProductName:    Mac OS X
Fri Jul 15 00:30:31 EDT 2011: ProductVersion:    10.6.7
Fri Jul 15 00:30:31 EDT 2011: BuildVersion:    10J869
Fri Jul 15 00:30:34 EDT 2011: list of disks
Fri Jul 15 00:30:34 EDT 2011: ---------
Fri Jul 15 00:30:34 EDT 2011: disk0s1
Fri Jul 15 00:30:34 EDT 2011: disk0s2
Fri Jul 15 00:30:34 EDT 2011: disk0s3
Fri Jul 15 00:30:34 EDT 2011: ---------
Fri Jul 15 00:30:34 EDT 2011: ---------
Fri Jul 15 00:30:34 EDT 2011: Disk Utility Output
Fri Jul 15 00:30:34 EDT 2011: ---------
Fri Jul 15 00:30:34 EDT 2011: /dev/disk0
Fri Jul 15 00:30:34 EDT 2011:    #:                       TYPE NAME                    SIZE       IDENTIFIER
Fri Jul 15 00:30:34 EDT 2011:    0:      GUID_partition_scheme                        *250.1 GB   disk0
Fri Jul 15 00:30:34 EDT 2011:    1:                        EFI                         209.7 MB   disk0s1
Fri Jul 15 00:30:34 EDT 2011:    2:                  Apple_HFS Macintosh HD            163.1 GB   disk0s2
Fri Jul 15 00:30:34 EDT 2011:    3:       Microsoft Basic Data BOOTCAMP                86.6 GB    disk0s3
Fri Jul 15 00:30:34 EDT 2011: /dev/disk1
Fri Jul 15 00:30:34 EDT 2011:    #:                       TYPE NAME                    SIZE       IDENTIFIER
Fri Jul 15 00:30:34 EDT 2011:    0:                            GRMCULFRER_EN_DVD      *2.5 GB     disk1
Fri Jul 15 00:30:34 EDT 2011: =================
Fri Jul 15 00:30:34 EDT 2011:    Device Identifier:        disk0s1
Fri Jul 15 00:30:34 EDT 2011:    Device Node:              /dev/disk0s1
Fri Jul 15 00:30:34 EDT 2011:    Part Of Whole:            disk0
Fri Jul 15 00:30:34 EDT 2011:    Device / Media Name:      EFI system partition
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Volume Name:
Fri Jul 15 00:30:34 EDT 2011:    Escaped with Unicode:
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Mounted:                  No
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    File System:              None
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Partition Type:           EFI
Fri Jul 15 00:30:34 EDT 2011:    Bootable:                 Not bootable
Fri Jul 15 00:30:34 EDT 2011:    Media Type:               Generic
Fri Jul 15 00:30:34 EDT 2011:    Protocol:                 SATA
Fri Jul 15 00:30:34 EDT 2011:    SMART Status:             Verified
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Total Size:               209.7 MB (209715200 Bytes) (exactly 409600 512-Byte-Blocks)
Fri Jul 15 00:30:34 EDT 2011:    Volume Free Space:        Not Applicable
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Read-Only Media:          No
Fri Jul 15 00:30:34 EDT 2011:    Read-Only Volume:         Not applicable (no filesystem)
Fri Jul 15 00:30:34 EDT 2011:    Ejectable:                No
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Whole:                    No
Fri Jul 15 00:30:34 EDT 2011:    Internal:                 Yes
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011: =================
Fri Jul 15 00:30:34 EDT 2011: =================
Fri Jul 15 00:30:34 EDT 2011:    Device Identifier:        disk0s2
Fri Jul 15 00:30:34 EDT 2011:    Device Node:              /dev/disk0s2
Fri Jul 15 00:30:34 EDT 2011:    Part Of Whole:            disk0
Fri Jul 15 00:30:34 EDT 2011:    Device / Media Name:      Customer
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Volume Name:              Macintosh HD
Fri Jul 15 00:30:34 EDT 2011:    Escaped with Unicode:     Macintosh%FF%FE%20%00HD
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Mounted:                  Yes
Fri Jul 15 00:30:34 EDT 2011:    Mount Point:              /
Fri Jul 15 00:30:34 EDT 2011:    Escaped with Unicode:     /
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    File System:              Journaled HFS+
Fri Jul 15 00:30:34 EDT 2011:    Type:                     hfs
Fri Jul 15 00:30:34 EDT 2011:    Name:                     Mac OS Extended (Journaled)
Fri Jul 15 00:30:34 EDT 2011:    Journal:                  Journal size 24576 KB at offset 0x15502000
Fri Jul 15 00:30:34 EDT 2011:    Owners:                   Enabled
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Partition Type:           Apple_HFS
Fri Jul 15 00:30:34 EDT 2011:    Bootable:                 Is bootable
Fri Jul 15 00:30:34 EDT 2011:    Media Type:               Generic
Fri Jul 15 00:30:34 EDT 2011:    Protocol:                 SATA
Fri Jul 15 00:30:34 EDT 2011:    SMART Status:             Verified
Fri Jul 15 00:30:34 EDT 2011:    Volume UUID:              EA2A1380-52C5-3C88-B51A-F9662CD740AE
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Total Size:               163.1 GB (163074539520 Bytes) (exactly 318504960 512-Byte-Blocks)
Fri Jul 15 00:30:34 EDT 2011:    Volume Free Space:        41.2 GB (41162997760 Bytes) (exactly 80396480 512-Byte-Blocks)
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Read-Only Media:          No
Fri Jul 15 00:30:34 EDT 2011:    Read-Only Volume:         No
Fri Jul 15 00:30:34 EDT 2011:    Ejectable:                No
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Whole:                    No
Fri Jul 15 00:30:34 EDT 2011:    Internal:                 Yes
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011: =================
Fri Jul 15 00:30:34 EDT 2011: =================
Fri Jul 15 00:30:34 EDT 2011:    Device Identifier:        disk0s3
Fri Jul 15 00:30:34 EDT 2011:    Device Node:              /dev/disk0s3
Fri Jul 15 00:30:34 EDT 2011:    Part Of Whole:            disk0
Fri Jul 15 00:30:34 EDT 2011:    Device / Media Name:      BOOTCAMP
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Volume Name:              BOOTCAMP
Fri Jul 15 00:30:34 EDT 2011:    Escaped with Unicode:     BOOTCAMP
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Mounted:                  Yes
Fri Jul 15 00:30:34 EDT 2011:    Mount Point:              /Volumes/BOOTCAMP
Fri Jul 15 00:30:34 EDT 2011:    Escaped with Unicode:     /Volumes/BOOTCAMP
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    File System:              NTFS
Fri Jul 15 00:30:34 EDT 2011:    Type:                     ntfs
Fri Jul 15 00:30:34 EDT 2011:    Name:                     Windows NT File System (NTFS)
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Partition Type:           Microsoft Basic Data
Fri Jul 15 00:30:34 EDT 2011:    Bootable:                 Is bootable
Fri Jul 15 00:30:34 EDT 2011:    Media Type:               Generic
Fri Jul 15 00:30:34 EDT 2011:    Protocol:                 SATA
Fri Jul 15 00:30:34 EDT 2011:    SMART Status:             Verified
Fri Jul 15 00:30:34 EDT 2011:    Volume UUID:              D7D509D6-DA2F-4A20-8C17-31EFCEB18674
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Total Size:               86.6 GB (86639640576 Bytes) (exactly 169218048 512-Byte-Blocks)
Fri Jul 15 00:30:34 EDT 2011:    Volume Free Space:        40.4 GB (40397713408 Bytes) (exactly 78901784 512-Byte-Blocks)
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Read-Only Media:          No
Fri Jul 15 00:30:34 EDT 2011:    Read-Only Volume:         Yes
Fri Jul 15 00:30:34 EDT 2011:    Ejectable:                No
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011:    Whole:                    No
Fri Jul 15 00:30:34 EDT 2011:    Internal:                 Yes
Fri Jul 15 00:30:34 EDT 2011:
Fri Jul 15 00:30:34 EDT 2011: =================
Fri Jul 15 00:31:12 EDT 2011
=====backing up boot sector=====
/bin/dd if="/dev/disk0" of="/Users/exquizite2/Desktop/Untitled.winclone/boot.mbr" bs=446 count=1
1+0 records in
1+0 records out
446 bytes transferred in 0.000750 secs (594804 bytes/sec)
return value of /bin/dd if="/dev/disk0" of="/Users/exquizite2/Desktop/Untitled.winclone/boot.mbr" bs=446 count=1 is 0
=======creating empty file to overwrite pagefile.sys with=========
/usr/bin/touch /tmp/winclone_empty_file
return value of /usr/bin/touch /tmp/winclone_empty_file is 0
Unmounting /dev/disk0s3
/usr/sbin/diskutil unmount "/dev/disk0s3"return value of unmount is 0
=======copying empty file over pagefile.sys=========
"/Library/NTFSProgs/ntfscp" "/dev/disk0s3" /tmp/winclone_empty_file pagefile.sys
return value of "/Library/NTFSProgs/ntfscp" "/dev/disk0s3" /tmp/winclone_empty_file pagefile.sys is 0
current size is 86639640576
partition id is 0x07
=====Special Format: Saving filesystem size==========
/bin/echo "86639636480" > "/Users/exquizite2/Desktop/Untitled.winclone/size"
return value of /bin/echo "86639636480" > "/Users/exquizite2/Desktop/Untitled.winclone/size" is 0
=====Saving partition id=====
/bin/echo "0x07" > "/Users/exquizite2/Desktop/Untitled.winclone/partitionid"
return value of /bin/echo "0x07" > "/Users/exquizite2/Desktop/Untitled.winclone/partitionid" is 0
Unmounting /dev/disk0s3
/usr/sbin/diskutil unmount "/dev/disk0s3"return value of unmount is 256
output is disk0s3 was already not mounted
=====Cloning==============
"/Library/NTFSProgs/ntfsclone" --save-image -f -o - "/dev/disk0s3" | /usr/bin/gzip -c > "/Users/exquizite2/Desktop/Untitled.winclone/boot.img.gz"
ntfsclone v2.0.0 (libntfs 10:0:0)
NTFS volume version: 3.1
Cluster size       : 4096 bytes
Current volume size: 86639636480 bytes (86640 MB)
Current device size: 86639640576 bytes (86640 MB)
Scanning volume ...
0.00 percent completed (edited out rest of percentages)
100.00 percent completed
Syncing ...
ERROR(45): fsync: Operation not supported
return value of "/Library/NTFSProgs/ntfsclone" --save-image -f -o - "/dev/disk0s3" | /usr/bin/gzip -c > "/Users/exquizite2/Desktop/Untitled.winclone/boot.img.gz" is 0
cleaning up: Mounting Disk
Volume BOOTCAMP on /dev/disk0s3 mounted
Fri Jul 15 01:37:29 EDT 2011

CFB won't load after update 1

I'm running CFB plugin on Eclipse 3.5.1 on Win 7 x64. I purchased CFB right after update 1 came out, restarted eclipse, entered my key, updated the software, restarted eclipse using the -clean option, and everything worked great. I've been using it for the past week. However, I just restarted eclipse for the first time since I've updated, and it won't load CFB. I get the following error:
Could not open the editor: No editor descriptor for id com.adobe.ide.editor.CFMLEditor
org.eclipse.ui.PartInitException: No editor descriptor for id com.adobe.ide.editor.CFMLEditor
    at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:598)
    at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:462)
    at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
    at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
    at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1417)
    at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
    at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
    at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
    at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
    at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
    at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
    at org.eclipse.ui.internal.Workbench$28.runWithException(Workbench.java:1384)
    at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
    at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
    at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
    at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3855)
    at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3476)
    at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316)
    at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
    at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
    at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
    at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
    at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
    at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
    at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
    at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
    at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
    at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Please help!!!

To fix this, I launched eclipse again with the -clean option. CFB asked me to enter a key (which I already had done before I applied update 1). I entered the key again and CFB loaded.
I had already run eclipse with the -clean option after installing CFB update 1. I double checked to make sure I didn't have to do this each time I restarted eclipse - I quit eclipse and launched it again, and CFB loaded. Everything seems to be working okay now.

System won't load after startup repair - Satellite A500

Similar Messages

Maybe you are looking for