System wont boot after installing fx5600 vga crd

Question

I have purchased a brand new msi 5600 vga card when i put it in the AGP slot the system wont boot its an Asus Mobo with p41800 my gfoce 4200ti werks fine any ideas ????
 ;(

Answer 1

Quote
Originally posted by Deathstalker
ricin,
Quote
In addition, making unsubstantiated statements as Deathstalker did that, quote "It has already been proven that 50% of all the problems relating to Vid Cards is Power Supply Related...." is not a valid argument either. If you're going to make those sort of claims, then you should back it up with firm data...
The point is, someone in the forums already did. All the forum regulars should remember when it happened too. A guy chastized us because we ask about the specs on people's power supplies. He took every post in the VGA forum to date and catagorized the solutions and found that only 50% of the problems in the forums were Power Supply Related.  To me, if one out of every two problems in the VGA Forums is Power Supply Related, by asking the question, we can identify and solve 50% of the problems.
But we are used to people like yourself coming along every few months.  Are you sure you did not used to log into these forums under the username of elzie?
Is this one of your old Threads:
A must read for everyone....
Richard
Yes, he does sound a bit like me doesn't he? (or vice versa). But no, we are two different people which your moderators can prove by looking at the IP addresses of both myself and elzie.
But I must admit he echo's my views. There is a definite danger that some posters who are here to help people will latch on to one supposed "solution" i.e. the PSU which is then tailored to fit all problems. Same goes for avoiding flashing the VGA BIOS especially over the Internet.
But as I've said before, 98% of system problems are software related and hardware only plays a minor role. It's a bit like a car. Without gas, you're not going anywhere regardless of all the technology that's been pumped into it. But gas can get contaminated with grit and can clog up fuel lines. So what should we do then? Change the whole car maybe? Or just replace the carburetor? After all, we don't want to risk damaging the machine by cleaning it do we?
There's just too much emphasis these days on blaming the product as the cause of the problem and replacing parts rather than taking the view that it's the user who has caused the problem himself by not following instructions when installing software. Statistics can be adapted to suit the issue too. But as I've already said, if the PSU was the main cause of failure of high end cards, the Internet would be literally littered with news about it. But there aren't any such articles, so how do you explain that?? And as Toms Hardware.com mentions here, the CPU and high end card can draw 160 watts. So it stands to reason that if you've got a 300W PSU, you've got more than enough over to run both doesn't it??
It's all very convenient to say, "replace the PSU and your troubles will be over", but if the problem persists after doing that, it won't do MSI reputation any good and the only benefit will be that a PSU manufacturer will have made a little extra profit this year.