System wont boot after todays update

Sorry for the german logs, hope there is no problem with understanding
[root@IgnazServer vamp898]# pacman -Syu
:: Synchronisiere Paketdatenbanken...
core 106,9 KiB 783K/s 00:00 [##################################################################] 100%
extra 1420,2 KiB 1457K/s 00:01 [##################################################################] 100%
community 1768,5 KiB 1478K/s 00:01 [##################################################################] 100%
multilib 92,1 KiB 862K/s 00:00 [##################################################################] 100%
:: Starte komplette Systemaktualisierung...
:: libsystemd durch core/systemd ersetzen? [J/n]
:: systemd-tools durch core/systemd ersetzen? [J/n]
Löse Abhängigkeiten auf...
Warnung: Abhängigkeits-Zyklus entdeckt:
Warnung: dbus-core wird vor seiner Abhängigkeit systemd installiert werden
Suche nach Zwischenkonflikten...
Pakete (16): cracklib-2.8.19-1 dbus-core-1.6.4-1 filesystem-2012.8-1 ifplugd-0.28-13 initscripts-2012.08.3-2 lib32-glibc-2.16.0-4 libedit-20120601_3.0-1
libsystemd-188-2 [removal] linux-lts-3.0.42-1 mpfr-3.1.1.p2-1 netcfg-2.8.10-1 openssh-6.1p1-1 systemd-189-4 systemd-tools-188-2 [removal] sysvinit-2.88-7
sysvinit-tools-2.88-7
Gesamtgröße des Downloads: 44,01 MiB
Gesamtgröße der zu installierenden Pakete: 86,67 MiB
Größendifferenz der Aktualisierung: 6,42 MiB
Installation fortsetzen? [J/n]
:: Empfange Pakete von core...
cracklib-2.8.19-1-x86_64 239,1 KiB 1043K/s 00:00 [##################################################################] 100%
filesystem-2012.8-1-any 5,8 KiB 398K/s 00:00 [##################################################################] 100%
dbus-core-1.6.4-1-x86_64 405,5 KiB 1360K/s 00:00 [##################################################################] 100%
systemd-189-4-x86_64 1202,7 KiB 1464K/s 00:01 [##################################################################] 100%
sysvinit-tools-2.88-7-x86_64 40,1 KiB 553K/s 00:00 [##################################################################] 100%
sysvinit-2.88-7-x86_64 42,4 KiB 602K/s 00:00 [##################################################################] 100%
initscripts-2012.08.3-2-any 22,0 KiB 448K/s 00:00 [##################################################################] 100%
libedit-20120601_3.0-1-x86_64 88,3 KiB 650K/s 00:00 [##################################################################] 100%
linux-lts-3.0.42-1-x86_64 38,4 MiB 1566K/s 00:25 [##################################################################] 100%
mpfr-3.1.1.p2-1-x86_64 339,9 KiB 1339K/s 00:00 [##################################################################] 100%
netcfg-2.8.10-1-any 29,6 KiB 600K/s 00:00 [##################################################################] 100%
openssh-6.1p1-1-x86_64 540,4 KiB 695K/s 00:01 [##################################################################] 100%
:: Empfange Pakete von extra...
ifplugd-0.28-13-x86_64 20,1 KiB 538K/s 00:00 [##################################################################] 100%
:: Empfange Pakete von multilib...
lib32-glibc-2.16.0-4-x86_64 2,7 MiB 1506K/s 00:02 [##################################################################] 100%
(14/14) Überprüfe Paket-Integrität [##################################################################] 100%
(14/14) Lade Paket-Dateien [##################################################################] 100%
(14/14) Prüfe auf Dateikonflikte [##################################################################] 100%
(16/16) Überprüfe verfügbaren Festplattenspeicher [##################################################################] 100%
(1/2) Entferne libsystemd [##################################################################] 100%
(2/2) Entferne systemd-tools [##################################################################] 100%
( 1/14) Aktualisiere cracklib [##################################################################] 100%
( 2/14) Aktualisiere filesystem [##################################################################] 100%
Warnung: Verzeichnis-Berechtigungen unterscheiden sich für srv/http/
Dateisystem: 775 Paket: 755
Warnung: Verzeichnis-Berechtigungen unterscheiden sich für sys/
Dateisystem: 755 Paket: 555
( 3/14) Aktualisiere ifplugd [##################################################################] 100%
( 4/14) Installiere dbus-core [##################################################################] 100%
( 5/14) Installiere systemd [##################################################################] 100%
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/bin/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd
Optionale Abhängigkeiten für systemd
initscripts: legacy support for /etc/rc.conf
python2-cairo: systemd-analyze
python2-dbus: systemd-analyze
systemd-sysvcompat: symlink package to provide sysvinit binaries
cryptsetup: required for encrypted block devices
( 6/14) Installiere sysvinit-tools [##################################################################] 100%
( 7/14) Aktualisiere sysvinit [##################################################################] 100%
( 8/14) Aktualisiere initscripts [##################################################################] 100%
( 9/14) Aktualisiere lib32-glibc [##################################################################] 100%
(10/14) Aktualisiere libedit [##################################################################] 100%
(11/14) Aktualisiere linux-lts [##################################################################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
==> Starting build: 3.0.42-1-lts
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
==> Starting build: 3.0.42-1-lts
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [pata]
-> Running build hook: [scsi]
-> Running build hook: [sata]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
==> Image generation successful
(12/14) Aktualisiere mpfr [##################################################################] 100%
(13/14) Aktualisiere netcfg [##################################################################] 100%
(14/14) Aktualisiere openssh [##################################################################] 100%
Warnung: /etc/ssh/sshd_config installiert als /etc/ssh/sshd_config.pacnew
yeah thats all, after reboot no sign of life.
As this is a server i cant do any analizes. As there is no news entry on the web-page i did not expected any fundamental change which causes the server no longer to start but it seems like a switch to Gentoo is really needed after this problem is solved.
Anyay, until then, i hope you can help me with that

Same here, try to downgrade linux-lts
https://bbs.archlinux.org/viewtopic.php?id=148223
and here, just like your case.
https://bbs.archlinux.org/viewtopic.php?id=148046
But no solution for now.
Last edited by kolombo (2012-09-03 10:36:37)

Similar Messages

Wont boot after windows update

M y Sateite A305 s6916 wont boot after windows updates tried to install.

Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
   Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
   Startup Repair: frequently asked questions
Also try a System Restore.
   What are the system recovery options in Windows Vista?
-Jerry

System wont boot after installing fx5600 vga crd

I have purchased a brand new msi 5600 vga card when i put it in the AGP slot the system wont boot its an Asus Mobo with p41800 my gfoce 4200ti werks fine any ideas ????
;(

Quote
Originally posted by Deathstalker
ricin,
Quote
In addition, making unsubstantiated statements as Deathstalker did that, quote "It has already been proven that 50% of all the problems relating to Vid Cards is Power Supply Related...." is not a valid argument either. If you're going to make those sort of claims, then you should back it up with firm data...
The point is, someone in the forums already did. All the forum regulars should remember when it happened too. A guy chastized us because we ask about the specs on people's power supplies. He took every post in the VGA forum to date and catagorized the solutions and found that only 50% of the problems in the forums were Power Supply Related. To me, if one out of every two problems in the VGA Forums is Power Supply Related, by asking the question, we can identify and solve 50% of the problems.
But we are used to people like yourself coming along every few months. Are you sure you did not used to log into these forums under the username of elzie?
Is this one of your old Threads:
A must read for everyone....
Richard
Yes, he does sound a bit like me doesn't he? (or vice versa). But no, we are two different people which your moderators can prove by looking at the IP addresses of both myself and elzie.
But I must admit he echo's my views. There is a definite danger that some posters who are here to help people will latch on to one supposed "solution" i.e. the PSU which is then tailored to fit all problems. Same goes for avoiding flashing the VGA BIOS especially over the Internet.
But as I've said before, 98% of system problems are software related and hardware only plays a minor role. It's a bit like a car. Without gas, you're not going anywhere regardless of all the technology that's been pumped into it. But gas can get contaminated with grit and can clog up fuel lines. So what should we do then? Change the whole car maybe? Or just replace the carburetor? After all, we don't want to risk damaging the machine by cleaning it do we?
There's just too much emphasis these days on blaming the product as the cause of the problem and replacing parts rather than taking the view that it's the user who has caused the problem himself by not following instructions when installing software. Statistics can be adapted to suit the issue too. But as I've already said, if the PSU was the main cause of failure of high end cards, the Internet would be literally littered with news about it. But there aren't any such articles, so how do you explain that?? And as Toms Hardware.com mentions here, the CPU and high end card can draw 160 watts. So it stands to reason that if you've got a 300W PSU, you've got more than enough over to run both doesn't it??
It's all very convenient to say, "replace the PSU and your troubles will be over", but if the problem persists after doing that, it won't do MSI reputation any good and the only benefit will be that a PSU manufacturer will have made a little extra profit this year.

System wont boot after flash

i flashed the bios the first time to upgrade to 3.6 but noticed the temps issue and wanted to revert to 3.5, now here started the problem. i downloaded the zip file from msi site, read the instructions file and since i couldnt made a boot disk for windows xp pro (tried the "make a dos startup disk" but the system wouldnt boot from it) i used the flash utility that came with live update 3. im now sure this was the biggest mistake i had ever done: i choose the A6728IMS.350 file as ROM file and it started the flash in windows (had no programs running)
after reboot the system wouldnt start
i looked at the D-Bracket and was surprised to see that it was hanging on Memory Detection Test ! so i cant use the flash recovery feature cause it wont even initialize the keyboard
any chance of recover or i can say bye bye to my bios?
P4 2.80c Ghz HT enabled no OC
MSI 865PE P series (the one with GLan, not sure of exact model)
1 Gb Kingston 400 Dual DDR (2X512 module)
Ati Radeon 9800 Pro
Be-Quiet 400 W active PFC S1.3 PSU

have you tried to do the bios recovery ?
i had this same issue when i flashed the bios when i first got this mobo.
its basically bullshit on the part of MSI, you cant flash from a floppy, it wont let you, you have to have the bios on a hard drive.
the problem with that is, that it only works for a FAT16 or FAT32 hard drive since you have to do it thru dos.
i mean is MSI thinking, how many peple with Windows XP still have FAT hard drives., luckily i do. otherwise. ggrrr.
and you cant make a start up disk ? thats pretty wierd, format the floppy and choose Copy System Files this will make it bootable.
just put the bios file you want on a regular floppy, i dont think i made mine bootable, and hold the "Bios Recovery" button,, sorry i cant recall what it is.
and i will use whatever bios you have on the floppy.
but please be sure to read the bios recovery tutorial.
i tried to flash with on of the bios's 3 times and it still wouldnt work, i had to keep going back to the original bios.
the latest bios flashes fine so i dont know i think there is something seriously wrong with the bios from ,, i think it was Aug, or Nov.
also have you tried moving the jumper on the motherboard ??? and starting the machine ? this will change all bios settings to default, and could help you.

T540p wont boot after bios update

I updated my T540p a few days ago using Lenovo Solution centre, hiwever, it cant boot after update. The power button is on and fan spins, but the screen is black. I tried: remove battery and all external device and press power button for 30 seconds, out back the battery, still screen wont show anything; tried usb recovery stick, didn't work; tried Recovery discs from Lenovo, still failed.
Please help. Thanks in advance.

Ouch. And just out of luck.
Chances are, the board is bricked.

K9N Diamond - Wont boot after BIOS update

Just attempted to update the BIOS on my PC and it now wont boot. Used LiveUpdate with the Windows flash option (don't have FD drive). The lights on the D-Bracket 2 get as far as LED 2 Green, 1,3,4 Red. I have already tried to Clear CMOS with no joy.
Any suggestions on how to proceed much appreciated - and yes, I already know, I've probably done something stupid
Thanks
Grant.

Quote from: BOSSKILLER on 25-March-07, 19:22:15
power down PC, remove power cord from the PSU, push several times power button to drain capacitors, then Clear CMOS and leave only one memory stick into DIMM slot close to CPU socket. pull back power cord and try to boot.
in a future do not update the BIOS for no reason....(only becouse its new, only becouse new BIOS maybe got a new logo and e.g...)
Looks like I'm back in business now. I found similar instructions at this location http://www.bosamar.com/K9N/trouble.html and followed the First Procedure.
Booted ok with one mem stick, in bios fail safe mode. I counted 7 short beeps while booting then one long beep. Not sure if this is ok. Read about bios beeps here https://forum-en.msi.com/index.php?topic=82221.0 and the final long beep seems to indicate a pass???. Anyway, Vista appeared to come up ok and I checked everything in the hardware device manager and all looked fine.
Proceed to reboot with all mem sticks back in place, again same beeps but Vista coming up ok.
Next I switched bios to optimized defaults, but now 6 short beeps - no long beep. Windows looks ok. 6 beeps appear to indicate a keyboard problem, but kbd seems to work fine???
System looks ok now, but not sure if i should look into those beeps a bit more? BIOS now at 1.3, should I leave as is or revert to an earlier revision?
One thing I know that I am going to do is to install the FD drive from my old PC
Thanks for all the help.
BTW, the reason I did the BIOS flash was as a last resort to get my sound to work. Tried the various creative driver as suggest elsewhere on this forum but without success (as of yet there is no official vista compatible audio driver for my mb from MSI). The JAUD1 connector looks to be connected as specified in manual (but no audio from either the front nor real panel audio connectors).

Laptop wont boot after BIOS update

Hello
i have a compaq CQ61-303SV laptop
i tried to update the BIOS and i download the file form the hp driver and support website
after i update the BIOS the laptop wont to boot and stop on a black screen
what to do please ...

Power down the notebook, disconnect AC adapter and remove the Battery, hold the power button down for a full 30 seconds, connect AC only, hit the power button and see if windows will load.

System cannot boot after last update

I think that problem in display detection.
X server log file:
[ 26.434]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 26.434] X Protocol Version 11, Revision 0
[ 26.434] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 26.434] Current Operating System: Linux black 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 26.434] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5db39538-f615-41e7-a67f-49b03b6a24be rw quiet
[ 26.434] Build Date: 21 September 2014 10:53:13AM
[ 26.435] (II) Module ABI versions:
[ 26.435] X.Org ANSI C Emulation: 0.4
[ 26.435] X.Org Video Driver: 18.0
[ 26.435] X.Org XInput driver : 21.0
[ 26.435] X.Org Server Extension : 8.0
[ 26.436] (EE) systemd-logind: failed to get session: PID 531 does not belong to any known session
[ 26.436] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.438] (--) PCI: (0:0:2:0) 8086:0122:1043:844d rev 9, Mem @ 0xfb400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 26.438] (--) PCI:*(0:1:0:0) 10de:0600:1043:8268 rev 162, Mem @ 0xfa000000/16777216, 0xc0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 26.438] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.438] (II) LoadModule: "glx"
[ 26.438] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.447] (II) Module glx: vendor="NVIDIA Corporation"
[ 26.447] compiled for 4.0.2, module version = 1.0.0
[ 26.447] Module class: X.Org Server Extension
[ 26.447] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
Is problem in xorg server or nvidia driver? I don't know what to do.

Trilby wrote:
The system certainly boots - you just cant start X it would seem.
What was updated? How do you start X? Is that the full log, it looks like it has been cut off?
Yes, system starts but I can only work through ssh. Here is the last full log:
[ 26.918]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 26.918] X Protocol Version 11, Revision 0
[ 26.918] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 26.918] Current Operating System: Linux black 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 26.918] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=5db39538-f615-41e7-a67f-49b03b6a24be rw quiet
[ 26.918] Build Date: 21 September 2014 10:53:13AM
[ 26.918]
[ 26.919] Current version of pixman: 0.32.6
[ 26.919] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 26.919] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 26.919] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 14 21:33:08 2014
[ 26.919] (==) Using config file: "/etc/X11/xorg.conf"
[ 26.919] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 26.919] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 26.919] (==) ServerLayout "Layout0"
[ 26.919] (**) |-->Screen "Screen0" (0)
[ 26.919] (**) | |-->Monitor "Monitor0"
[ 26.919] (**) | |-->Device "Device0"
[ 26.919] (**) |-->Input Device "Keyboard0"
[ 26.919] (**) |-->Input Device "Mouse0"
[ 26.919] (==) Automatically adding devices
[ 26.919] (==) Automatically enabling devices
[ 26.919] (==) Automatically adding GPU devices
[ 26.919] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 26.919] Entry deleted from font path.
[ 26.919] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 26.919] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 26.919] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 26.919] (WW) Disabling Keyboard0
[ 26.919] (WW) Disabling Mouse0
[ 26.919] (II) Loader magic: 0x818d80
[ 26.919] (II) Module ABI versions:
[ 26.919] X.Org ANSI C Emulation: 0.4
[ 26.919] X.Org Video Driver: 18.0
[ 26.919] X.Org XInput driver : 21.0
[ 26.919] X.Org Server Extension : 8.0
[ 26.920] (EE) systemd-logind: failed to get session: PID 543 does not belong to any known session
[ 26.920] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 26.921] (--) PCI: (0:0:2:0) 8086:0122:1043:844d rev 9, Mem @ 0xfb400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 26.921] (--) PCI:*(0:1:0:0) 10de:0600:1043:8268 rev 162, Mem @ 0xfa000000/16777216, 0xc0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 26.921] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 26.921] (II) LoadModule: "glx"
[ 26.922] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.928] (II) Module glx: vendor="NVIDIA Corporation"
[ 26.928] compiled for 4.0.2, module version = 1.0.0
[ 26.928] Module class: X.Org Server Extension
[ 26.928] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 26.928] (II) LoadModule: "nvidia"
[ 26.928] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.928] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.928] compiled for 4.0.2, module version = 1.0.0
[ 26.928] Module class: X.Org Video Driver
[ 26.928] (II) NVIDIA dlloader X Driver 343.22 Thu Sep 11 15:34:47 PDT 2014
[ 26.928] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 26.928] (++) using VT number 7
[ 26.940] (II) Loading sub module "fb"
[ 26.940] (II) LoadModule: "fb"
[ 26.940] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 26.940] (II) Module fb: vendor="X.Org Foundation"
[ 26.940] compiled for 1.16.1, module version = 1.0.0
[ 26.940] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.940] (II) Loading sub module "wfb"
[ 26.940] (II) LoadModule: "wfb"
[ 26.940] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 26.941] (II) Module wfb: vendor="X.Org Foundation"
[ 26.941] compiled for 1.16.1, module version = 1.0.0
[ 26.941] ABI class: X.Org ANSI C Emulation, version 0.4
[ 26.941] (II) Loading sub module "ramdac"
[ 26.941] (II) LoadModule: "ramdac"
[ 26.941] (II) Module "ramdac" already built-in
[ 26.941] (WW) NVIDIA(0): The NVIDIA GeForce 8800 GTS 512 GPU installed in this system
[ 26.941] (WW) NVIDIA(0): is supported through the NVIDIA 340.xx Legacy drivers.
[ 26.941] (WW) NVIDIA(0): Please visit http://www.nvidia.com/object/unix.html for
[ 26.941] (WW) NVIDIA(0): more information. The 343.22 NVIDIA driver will ignore
[ 26.941] (WW) NVIDIA(0): this GPU. Continuing probe...
[ 26.941] (EE) No devices detected.
[ 26.941] (EE)
Fatal server error:
[ 26.941] (EE) no screens found(EE)
[ 26.941] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 26.941] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.941] (EE)
Thank you for your answer!

System wont boot after restart, hangs..

Hello.
Recently i have got a strange problem.
When i restart or power on my computer without using the "main power switch on psu" my system hangs either just before cpu post or memory post.
If i turn it off and on again using the switch on the psu it boots just fine..
I have searched alot around the internet and tried many things. Tried disconnenting devices, resetting cmos, disconnect everything from mobo and resetting cmos, tried new bios, tested my ram sticks in memtest and so on..
The funny thing is that this problem suddenly occured. My system worked fine until 2 weeks ago.
Also it have happened that it freezes in windows, screen freezes and computer stops responding. But usually in have run for 2-4 days before that happens.
It would be very much appreciated if someone could help me out with this
My specs:
Msi k8n neo2 platinum 54g
Amd 64 3200 winchester
4 * 512mb 3200 ocz ram
Mist 430w psu
4* 200gb maxtor s-ata
card reader
dvd-rw
ati x800xl
+ alot of silent fans

Ok, now i am confused.
I have discussed this problem with other people in a norwegian forum. They guess that it is the motherboard which is causing this problem.
I also think that. Because system have worked perfect until recently. As i said earlier i have tried to disable some hardware to see how that worked and it was the same.
Now when system i booted it is 100% stable. The freezes that occured in windows was software related.
Also discovered that if i load windows in fail safe mode problem is gone! Have not been able to figure that one out.
Almost getting depressed here.
Comments? Tips?

K9NGM-L Help!! System wont boot after Online Live Flash Update

MSI K9NGM-L
Athlon AM2 3800 Dual core
4 x 1 gig Ram sticks
500w powersupply
Ok everything was working fine except the clock in both the bios and windows was going fast gaining about 1 minute every half an hour so i decided that it mabe a bios issue so i used the online Live Bios flash utility. its now upgraded to the latest bios. said to restart and since then all the lights are on on the pc the hard drive dosent seem like its making a noise, but now screen activity what so ever. i think i may have to flash the bios again with a floppy but dont know how or where to start as its been a long time since i did floppy flashing. Any help would be great. Thanks in advance.

Quote from: Intoxic8 on 16-June-07, 17:04:41
ok slight success
now screen is on
but with this message:
checksum BAd
press F1 to run setup
press F2 to run default values and continue
that's normal and expected. go to BIOS, then "LOAD BIOS OPTIMIZED DEFAULTS", then "SAVE AND EXIT". message should gone.
after that if you need to apply some custom BIOS options, back to BIOS and apply them.
Quote from: AaronYuri on 16-June-07, 17:05:41
BK,
Your on a role of correcting me today.

P67a-gd53 wont boot after live update

my computors been fine for the last 12 months but for some daft reason i downloaded live update 5 last night and set it off
today the computor was on when i came to it (after i turned it off last night)
blank screen
i pressed reset and it started looping initial boot
comes on 2 beeps waits a few seconds fans running and shuts off
few seconds later and it repeats
comes on 2 beeps waits a few seconds fans running and shuts off
all 6 aps leds are on during the boot
im guessing something in the live update has killed my motherboard?

Try pulling the PSU power cord, removing the battery for awhile, clear CMOS. If it will then get to the UEFI/BIOS screen, reset and see how it goes. If the OS was loaded under AHCI, be sure to remember to set the SATA controller mode again and also set the correct boot order.
Added: And remove Live Update from your computer.

NB550D - Wont boot after Windows Update

Netbook may have powered off during Windows Update as now it will not get past the green loading bar with "Microsoft Corporation" underneath. It gives an option to start windows normally or to load repair files but both end up stuck on the green loading bar. Safe mode (all options) gets as far as classpnp.sys then freezes.
Using a different laptop I made a Window Repair Disk and then copied the files over the a USB (netbook has no CD Drive) as per the online guides. When the USB is booted the repair files load, there is a blinking cursor then it's back into the green loading bar. Safe mode (all options) gets stuck on disk.sys with the USB inserted.
Found some threads with similar symptoms with most being caused by a dodgy HD connection (checked, nothing obviously disconnected) or the wrong SATA mode selected in the BIOS (seems to make no difference between ACHI or Compatible). Next plan is to boot a live linux version and try to replace the classpnp.sys file with on from another copy of Windows 7.
If anyone has experienced this before or can give any pointers they'd be greatly appreciated,
Thanks.

Hi
To be honest never had any problems after a windows update.
But it looks like a system fault.
My first idea was the usage of the repair option and trying to start the OS using the option: use the last good known configuration.
But if this would not help, then you can try to replace the files using and booting from the Live CD. Not quite sure if this would solve the problem but I think its definitely worth a try otherwise you would need to reinstall the OS using the HDD recovery (if still available )

Z50-75, wont boot after bios update

Hi to all!
I just baught Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
I would appriciate any kond of help, please give me some advice.
Solved!
Go to Solution.

Someone else posted about a similar problem. I will give you the link to their post and you can decide if it is something you want to try.
http://forums.lenovo.com/t5/Windows-8-and-8-1/black-screen-after-2-reboot/td-p/1738899
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Xp wont boot after bios update with dualcore amd 4200+ (k8n-neo2 platinum)

after flashing the bios (xp already installed on a sata stripe array)
xp wouldn't boot anymore ... ik had to flash the bios to be able to
use my amd x2 4200+ ...
so I tried to instal xp freshly on the sata raid ... hangs when it restarts to instal devices ... nothing would help diffrent drivers , basic bios settings , all pci cards removed and switched of everything i could in the bios to get a really basic setup
to instal ... no help whatsoever ...
now if i try to instal on a normal ide everything works like a breeze ... dual core , raid , everything ...
personaly I suspect either the windows instal stuff to be the problem with dualcore
but even more the nforce drivers since they have not been updated since june 2004 ...
can someone help me out please ???

Quote from: Budwise on 22-September-05, 13:08:34
try 1.B
If you check in his sig he is using 1b.
Quote from: Wonkanoby on 21-September-05, 15:36:21
there are newer nforce raid/ide drivers thasn that
http://www.nforcershq.com/forum/nforce4-driver-812-vt62037.html
His board is a NForce3. Here is the actually link for the drivers. http://www.nvidia.com/object/nforce_udp_winxp_5.10.html These were released September of 04 and it was stated
Quote from: NForce Release Notes
# Storage Driver Improvements:
* RAID Morphing
* Improved RAID Interface
* RAID spans both SATA and PATA devices
* RAID 0, 1, and 0+1
* Improved handling of various storage devices
Unfortunately I don't know how to get the correct files to a floppy to get windows to use them in the install process, but hopefully someone here does.
Good Luck
Jeremy

Pavilion g6t wont boot after bios update now just black screen please help!

I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

@Fuschia4me,
1.       You will have to use another computer
2.       Access the HP.com site with the BIOS updates available here is the link
3.       You want to select the F.36 BIOS version
4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
5.       Once done insert the flash drive into your laptop
6.       Turn the computer on and press the windows and B key like before
If the process doesn’t work the first time I would try at least 2 more times.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

System wont boot after todays update

Similar Messages

Maybe you are looking for