System wont load 1 in 10 times

Dear Guys,
My computer won't load properly maybe 1 in 10 times that I turn it on. The CD and writer drives will spin up and down, the monitor won't power on, and nothing else really happens.Then if i press the restart button it loads. Sometimes i have to press it more than once. The power led is on and the HD led lights up for some time and then goes off .Most other times my computer is totally fine.Please tell me what to do?
Windows XP Home Edition Service Pack 1 (build 2600)
MSI MS-7058 100 (915g combo)
Processor a Main Circuit Board b 2.80 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache Board: MSI MS-7058 100
Bus Clock: 800 megahertz
BIOS: American Megatrends Inc. V1.6B0 02/22/2005 Drives Memory Modules c,d 79.97 Gigabytes Usable Hard Drive Capacity
28.22 Gigabytes Hard Drive Free Space
HL-DT-ST CD-ROM GCR-8523B
LITE-ON CD-RW SOHR-5238S [CD-ROM drive]
3.5" format removeable media [Floppy drive]
ST380013AS [Hard drive] (80.02 GB) -- drive 0 248 Megabytes Installed Memory
Slot 'DIMM0' is Empty
Slot 'DIMM1' has 256 MB
Slot 'DIMM2' is Empty
Slot 'DIMM3' is Empty
Intel(R) 82915G/GV/910GL Express Chipset Family [Display adapter]
BENQ FP567s [Monitor] (15.2"vis, May 2004

Hi novjoe
thanks for the reply heres the full system specs and psu specs . I checked out the underneath the mobo. Nothing found. I also removed all the cd roms , floppy ,extra fans etc and checked so i doubt PSU problem . Could it be a possibility of a fauty RAM ?
Because when i removed the ram we get the same symtoms -- Fans runnig ,led lights up No monitor signal etc.Thanks for the help. iam quite freaked out i love my comp so much.
Motherboard : MSI MS-7058 100
Windows XP Home Edition Service Pack 1
2.80 gigahertz Intel Pentium 4
16 kilobyte primary memory cache
1024 kilobyte secondary memory cache
Cd roms:
HL-DT-ST CD-ROM GCR-8523B
LITE-ON CD-RW SOHR-5238S [CD-ROM drive]
Floppy : 3.5" format removeable media [Floppy drive]
Har drive : Seagate
RAM : Seagate 256
Controllers
Standard floppy disk controller
Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
Primary IDE Channel [Controller]
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
Secondary IDE Channel [Controller
Bus Adapters Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Audio
C-Media High Definition Audio Device
Unimodem Half-Duplex Audio Device
Other devices
HID UPS Battery
American Power Conversion USB UPS
Frontech USB PC Camera
Built-in Infrared Device
Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Microsoft PS/2 Mouse
One Case Fan
Modem
Smart Link 56K Voice Modem
PSU info
AOpen psu
Ac input :115/230v -6/3a 60/50hz
dc output :250w
+3.3v-- 14.0a (org)
+5v--25.oa (red)
+12v--8.oa (yel)
+5vsb--2.0a (purp)
-5v--0.3a (white)
-12v-- o.8a (blu)
p.g signal (gray) ground (black)
+3.3 and +5v = 165w max

Similar Messages

HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

Pages wont load half the time have to close all the way and reopen always says conecting this really started to happen after the last 2 updates

pages wont load half the time have to close all the way and reopen always says connecting this really started to happen after the last 2 updates

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

New system wont load WIN XP Pro

Hi all,
Thanks for all of your help (see last post). I finally got my box together. The problem I have is that I cant get WIN XP Pro to install. It starts the set up and then loads a but load of drivers... then says starting Windows Setup at the bottom right of the screen. Is there something special I need to do?
I am going to get a new Case and PSU on Monday as I found my power switch is broken on my new case...
Athlon XP 2400+
K7n2 D-ILSR
BFG Asylum GF4 Ti4200
60 GB Maxtor Diamondmax
Liteon DVD
Liteon CDRW
Fudin Aluminum Case w/ 400 w Raidmax PSU
Mushkin Level 2 Dual Pack (256x2)
Also, my cpu fsb is set at 100 mhz, when I set it to 133 the system wont post. The sys gives me a mem error on the D bracket and beeping. Could it be my PSU? will be buying an Antec or Enermax on Monday....

Hi,
I have a K7N420D Pro Mobo and I had a similar problem. There were two issues:
1. I have a PCI RAID controller (add-in card).
2. I plugged my cable modem into my board's ethernet
controller (I was hoping for XP to auto detect).
I tried to install XP on a number of occasions but it failed each time - I removed both of the above and it installed first time.
I suppose it would be a good idea to keep your Mobo peripherals to a bare minimum whilst installing XP. Install your cards/peripherals once you have XP installed.
As to your Mem and FSB problem - I've no doubt spomeone'll be along in a minute......
Axel

System wont load.

When i press the power button the system stays with the image of the apple, and the "thinking" timer in the screen, but it wont proceed to the main frame, it is just stuck there.

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup

Operating system wont load

i believe that i may have turned off the power switch on the wall that feeds electricity to everything in my room, while my computer was running pro tools. Now when i turn on the computer, my operating system does not load and it does not ask for my password. All i see is a blank blue screen, but my mouse is being recognized. I hope my files are not lost.What do i do to restore my OS(tiger) without losing all the files on my computer?

Hi, B. G. Welcome to the Discussions.
1. I suggest you begin troubleshooting using the process specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified. This is a good procedure to run after a power failure.
2. A blue screen at startup can also indicate a problematic Startup or Login item. If step 1 above does not resolve the issue, my "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is exacerbating the problem.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

My itunes wont load or open!

I think I have tried absolutely everything and my Itunes still wont load.
Every time I click on itunes it does the blue circle load for about 5 seconds then leaves but never pops up.
I have uninstalled every apple product then downloaded them again.
I have tried 'Repairing' Itunes, QuickTime and even that Bonjour thing. No luck there
I have gone into task manager multiple times and closed the process of itunes.
I would really like my itunes back! Help would be greatly apreaciated.

This may or may not work for you, but it might be worth a try since it has worked for me. Press Ctrl-Alt-Delete to bring up the task manager. In the processes tab, find iTunes in the list and end it. Close the task manager, and click on your iTunes icon. It should start.

If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my Library .... WHY!

When I try to Home-Share It works most of the time. It will always show up, but sometimes I tap on the icon of my library then it wont load, I restart my computer, IOS Divice and my router It still wont load my library. I even went and tried to reinstall Itunes and everything nothing works.

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

F4v wont load in firefox the first time.

Hi all!
Im not sure if this is the place to put this, but i have a problem.
I have created a swf movie file that containes the movie playback panel & a f4v video & I have uploaded them to a subfolder on my server.
The whole site has a secure connection (https), but the page that i will try to embed the movie will have a regualr connection (http).
The problem arises when i do embed this flash video in a HTML file. in IE & Chrome it works and looks great, But in firefox it doesnt.
If i clear my cache (as if i were a new visitor to the site) and enter the page, the movie isn't displayed at all...is shows "done" in the browser loading bar.
After about a minute or so (which i assume is the amount of time it takes to load the full movie), i hit refresh, and the movie appears fully loaded.
The movie is currently embeded in my homepage (via Iframe - for site protocol reasons), and if it wont load immidiatly from the first time a user enters the site, many users will miss the video (and get a blank white box in the middle of the site).
The URL for the html file is http://www.globaloption.com/PartnerSites/globaloptions_en/vid/Global9.8/videosmall.html
I really hope you can help me make sense of this problem...

you should be using a local path to
http://www.globaloption.com/partnersites/globaloptions_en/vid/global9.8/videosmall.f4v
are you?

I bought CS4 a while back, and only loaded it one time on a PC with Windows XP operating system...

I bought CS4 a while back, and only loaded it one time on a PC with Windows XP operating system. I understand I can load it 2 times. Will it work if I load it on Windows 8?

You won't know until you try. These older versions were never extensively tested or certified on Win 8, but it should work for the most part iuf you follow the necessary procedures liuek turning off UAC and otehr fancies that may get in the way.
Mylenium

Trying to get a game back gardens of time, wont load

I recently started playing a game on line called gardens of time. They had issues with it and was told to try deleting histories, and then configurating. said totry firefox. Ican still recieve gifts and send them back, but the game wont load to play.Am I doing something wrong? Please help

http://store.apple.com/us/product/TC292LL/A?mco=MTY3ODQ5OTY
I don't think the game is supported on Snow Leopard.

Accounts system prefrences page wont load

Accounts pane of system prefrences wont load.
and i use multiple users.
I have a few fidle finger users so i need to limit them.
thanx
jord

If those other solutions don't do the trick, as a last step I would recommend performing an "Archive and install". Basically, this re-installs Mac OS X without removing any of your user files, settings, applications, etc. It re-installs your operating system, but in a way that preserves everything that you had before. It should fix your System Preferences problem.
For detailed instructions on how to perform an archive and install, go here: http://docs.info.apple.com/article.html?artnum=107120
Good Luck!
Jason

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Hi, you can't have a PowerMac, they can't run 10.6, 10.7, or ML/10.8!
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

My itunes wont load up on my computer? ity worked fine last time

i tried to start Itunes on my computer it wont load up?

Like I said:
Connect the iPod to the computer and make a backup by right clicking on the iPOd under Devices in iTunes and select Back Up. When you right click a menua comes up and you select Backup.
To restore see:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
Before you restore just make sure that all yur synced items like music and video synced to the iPOd are on the computer since those items are not in the backup. For what is in the backup see:
iTunes: About iOS backups

System wont load 1 in 10 times

Similar Messages

Maybe you are looking for