System wont load.

When i press the power button the system stays with the image of the apple, and the "thinking" timer in the screen, but it wont proceed to the main frame, it is just stuck there.

The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
Mac OS X: Gray screen appears during startup

Similar Messages

  • HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

    during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

    In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
    @TJBUSMC1973-
    I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
    Again I thank you for your advice but I don't think that will help.
    I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

  • New system wont load WIN XP Pro

    Hi all,
    Thanks for all of your help (see last post). I finally got my box together. The problem I have is that I cant get WIN XP Pro to install. It starts the set up and then loads a but load of drivers... then says starting Windows Setup at the bottom right of the screen. Is there something special I need to do?
    I am going to get a new Case and PSU on Monday as I found my power switch is broken on my new case...
    Athlon XP 2400+
    K7n2 D-ILSR
    BFG Asylum GF4 Ti4200
    60 GB Maxtor Diamondmax
    Liteon DVD
    Liteon CDRW
    Fudin Aluminum Case w/ 400 w Raidmax PSU
    Mushkin Level 2 Dual Pack (256x2)
    Also, my cpu fsb is set at 100 mhz, when I set it to 133 the system wont post. The sys gives me a mem error on the D bracket and beeping. Could it be my PSU? will be buying an Antec or Enermax on Monday....

    Hi,
    I have a K7N420D Pro Mobo and I had a similar problem. There were two issues:
    1. I have a PCI RAID controller (add-in card).
    2. I plugged my cable modem into my board's ethernet
       controller (I was hoping for XP to auto detect).
    I tried to install XP on a number of occasions but it failed each time - I removed both of the above and it installed first time.
    I suppose it would be a good idea to keep your Mobo peripherals to a bare minimum whilst installing XP. Install your cards/peripherals once you have XP installed.
    As to your Mem and FSB problem - I've no doubt spomeone'll be along in a minute......
    Axel

  • Operating system wont load

    i believe that i may have turned off the power switch on the wall that feeds electricity to everything in my room, while my computer was running pro tools. Now when i turn on the computer, my operating system does not load and it does not ask for my password. All i see is a blank blue screen, but my mouse is being recognized. I hope my files are not lost.What do i do to restore my OS(tiger) without losing all the files on my computer?

    Hi, B. G. Welcome to the Discussions.
    1. I suggest you begin troubleshooting using the process specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified. This is a good procedure to run after a power failure.
    2. A blue screen at startup can also indicate a problematic Startup or Login item. If step 1 above does not resolve the issue, my "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is exacerbating the problem.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • System wont load 1 in 10 times

    Dear Guys,
    My computer won't load properly maybe 1 in 10 times that I turn it on. The CD and writer drives will spin up and down, the monitor won't power on, and nothing else really happens.Then if i press the restart button it loads. Sometimes i have to press it more than once. The power led is on and the HD led lights up for some time and then goes off .Most other times my computer is totally fine.Please tell me what to do?
    Windows XP Home Edition Service Pack 1 (build 2600)
     MSI MS-7058 100 (915g combo)
     Processor a Main Circuit Board b 2.80 gigahertz Intel Pentium 4
    16 kilobyte primary memory cache
    1024 kilobyte secondary memory cache Board: MSI MS-7058 100
    Bus Clock: 800 megahertz
    BIOS: American Megatrends Inc. V1.6B0 02/22/2005 Drives Memory Modules c,d 79.97 Gigabytes Usable Hard Drive Capacity
    28.22 Gigabytes Hard Drive Free Space
    HL-DT-ST CD-ROM GCR-8523B
    LITE-ON CD-RW SOHR-5238S [CD-ROM drive]
    3.5" format removeable media [Floppy drive]
    ST380013AS [Hard drive] (80.02 GB) -- drive 0 248 Megabytes Installed Memory
    Slot 'DIMM0' is Empty
    Slot 'DIMM1' has 256 MB
    Slot 'DIMM2' is Empty
    Slot 'DIMM3' is Empty
    Intel(R) 82915G/GV/910GL Express Chipset Family [Display adapter]
    BENQ FP567s [Monitor] (15.2"vis, May 2004

    Hi novjoe
     thanks for the reply heres the full system specs and psu specs . I checked out the underneath the mobo. Nothing found. I also removed all the cd roms , floppy ,extra fans etc and checked so i doubt PSU problem . Could it be a possibility of a fauty RAM ?
    Because when i removed the ram we get the same symtoms -- Fans runnig ,led lights up No monitor signal etc.Thanks for the help. iam quite freaked out i love my comp so much.
    Motherboard : MSI MS-7058 100
    Windows XP Home Edition Service Pack 1
    2.80 gigahertz Intel Pentium 4
    16 kilobyte primary memory cache
    1024 kilobyte secondary memory cache
    Cd roms:
     HL-DT-ST CD-ROM GCR-8523B
    LITE-ON CD-RW SOHR-5238S [CD-ROM drive]
    Floppy : 3.5" format removeable media [Floppy drive]
    Har drive : Seagate
    RAM : Seagate 256
    Controllers
     Standard floppy disk controller
    Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
    Intel(R) 82801FB/FBM Ultra ATA Storage Controllers - 266F
    Primary IDE Channel [Controller]
    Primary IDE Channel [Controller]
    Secondary IDE Channel [Controller]
    Secondary IDE Channel [Controller
    Bus Adapters Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C
    Audio
    C-Media High Definition Audio Device
    Unimodem Half-Duplex Audio Device
    Other devices
    HID UPS Battery
    American Power Conversion USB UPS
    Frontech USB PC Camera
    Built-in Infrared Device
    Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
    Microsoft PS/2 Mouse
    One Case Fan
    Modem
    Smart Link 56K Voice Modem
    PSU info
    AOpen psu
    Ac input :115/230v -6/3a  60/50hz
    dc output :250w
    +3.3v-- 14.0a (org)
    +5v--25.oa (red)
    +12v--8.oa (yel)
    +5vsb--2.0a (purp)
    -5v--0.3a (white)
    -12v-- o.8a (blu)
    p.g signal (gray) ground (black)
    +3.3 and +5v = 165w max

  • Accounts system prefrences page wont load

    Accounts pane of system prefrences wont load.
    and i use multiple users.
    I have a few fidle finger users so i need to limit them.
    thanx
    jord

    If those other solutions don't do the trick, as a last step I would recommend performing an "Archive and install". Basically, this re-installs Mac OS X without removing any of your user files, settings, applications, etc. It re-installs your operating system, but in a way that preserves everything that you had before. It should fix your System Preferences problem.
    For detailed instructions on how to perform an archive and install, go here: http://docs.info.apple.com/article.html?artnum=107120
    Good Luck!
    Jason

  • Wont load in kids profile on xp system

    Firefox wont load in kids profile but work in admin profile on xp.
    == This happened ==
    Not sure how often
    == right after up grade of virus program

    If you close Firefox, then start Firefox in Safe Mode, does the problem still occur? For instructions on starting in Safe Mode, see [[Safe Mode]].

  • Itunes wont load due to java scriptcore.dll what do i do, itunes wont load due to java scriptcore.dll what do i do

    Suddenly itunes stopped loading. I uninstalled it and tried to reinstall it but it wont load saying the Java sript core.dll is not valid. What do i do to fix this? And will i be able to get my downloads back?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • How can I deactivate when Acrobat Pro XI wont load?

    I installed a purchased upgrade of Acrobat Pro XI on this computer but all I now get is a screen headed 'Sign in Required' inviting me to register my trial version but providing no links to do so.
    Much of Acrobat XI Pro did not work.properly but Adobe tells me I don't have sufficient memory despite the required 1GB being installed.
    An unsatisfactory product from a company now difficult to contact by email that hides behind an unhelpful 'Help' desk in India staffed by non-proficient English speakers incapable of providing any answers not on their crib sheets.
    I am directed here to get a user to do Adobe's work.
    What follows indicates Adoobe sens emails from non.valid addresses.
    Mail System Error - Returned Mail
    From: Mail Administrator <[email protected]>   |   Date: 25/09/2013 3:47 PM  |  Email  
    To: John Face<[email protected]>   View message details  
    Attachments: Part_0 (350b) (350b)  
            This Message was undeliverable due to the following reason:
    Each of the following recipients was rejected by a remote mail server.
    The reasons given by the server are included to help you determine why
    each recipient was rejected.
    Recipient: <[email protected]>
    Reason: No such user - psmtp
    Please reply to <[email protected]>
    if you feel this message to be in error.
    Causes nothing but problems.
    Just posted on your forums
    3:39 PM 25/09/2013
    http://forums.adobe.com/post!input.jspa?containerType=14&container=4714
    How can I deactivate when Acrobat Pro XI wont load?
    I installed a purchased upgrade of Acrobat Pro XI on this computer but all I now get is a screen headed 'Sign in Required' inviting me to register my trial version but providing no links to do so.
    Much of Acrobat XI Pro did not work.properly but Adobe tells me I don't have sufficient memory despite the required 1GB being installed.
    An unsatisfactory product from a company now difficult to contact by email that hides behind an unhelpful 'Help' desk in India staffed by non-proficient English speakers incapable of providing any answers not on their crib sheets.
    I am directed here to get a user to do Adobe's work.
    http://forums.adobe.com/thread/1303366
    From: Adobe <[email protected]>
    To: [email protected];
    Subject: Reuse content making tedious work easier
    Stop retyping and start reusing.
    See how
    >>http://www.adobe.com/au/campaigns/acrobat-xi-content-reuse.html?trackingid=KIKZR
    Read online
    >>http://click.mail.adobesystems.com/?qs=1fdac03698836d3f227a6f8e4faefabc020ad712061d8f58583 a1aeff2e2ddc999d80757db497536
    --=----=----=----=----=----=----=----=----=----=----=----=----=----=--
    Adobe(R) Adrobat(R) XI
    --=----=----=----=----=----=----=----=----=----=----=----=----=----=--
    Stop retyping and start reusing. Acrobat XI puts an end to the
    busywork when it comes to repurposing PDF file content.
    See how
    >>http://www.adobe.com/au/campaigns/acrobat-xi-content-reuse.html?trackingid=KIKZS
    It?s a breeze to reuse what you need from PDF files with Acrobat XI.
    When you need to grab important content from inside a PDF or reuse the
    whole thing, Adobe(R) Acrobat(R) XI software makes it easy to convert
    PDF documents to Microsoft Word, Excel, and PowerPoint?with no
    retyping and minimal reformatting.
    As simply as saving a file, you can get just what you need and get
    back to more important work.
    See how >>
    >>http://www.adobe.com/au/campaigns/acrobat-xi-content-reuse.html?trackingid=KIKZT
    PC magazine Editor's choice 2012
    --=----=----=----=----=----=----=----=----=----=----=----=----=----=--
    #Acrobat
    >>http://twitter.com/search?q=%23acrobat
    --=----=----=----=----=----=----=----=----=----=----=----=----=----=--
    PCmag.com Editors' Choice logo is a trademark of Ziff Davis, Inc.
    Used under license.
    Adobe, the Adobe logo, the Adobe PDF logo, and Acrobat are either
    registered trademarks or trademarks of Adobe Systems Incorporated in
    the United States and/or other countries. All other trademarks are the
    property of their respective owners.
    (C) 2013 Adobe Systems Incorporated. All rights reserved.
    This is an advertising message from Adobe Systems Pty Ltd, its
    affiliates and agents ("Adobe"), Tower 2, Level 27, 201 Sussex Street Sydney,
    New South Wales, 2000, Australia.
    If you'd prefer not to receive email like this from Adobe in the
    future, please click here to unsubscribe. Alternatively, you may
    mail your unsubscribe request to:
    >> http://click.mail.adobesystems.com/?qs=1fdac03698836d3f1ad59e785d5dc693562fd9325ddedc06b18 2523889dab970e16f0296df7a4a18
    UNSUBSCRIBE
    >> http://click.mail.adobesystems.com/?qs=1fdac03698836d3f1ad59e785d5dc693562fd9325ddedc06b18 2523889dab970e16f0296df7a4a18
    Adobe Systems Pty Ltd
    Tower 2, Level 27, 201 Sussex Street
    Sydney, New South Wales,
    2000,
    Australia
    Attn:
    Field Marketing Department
    Your privacy is important to us. Please review Adobe's online Privacy
    Policy by clicking www.adobe.com/au/privacy.html (Australia)
    >>http://www.adobe.com/au/privacy.html
    www.adobe.com/nz/privacy.html (New Zealand)
    >>http://www.adobe.com/nz/privacy.html
    For customer service issues please visit our web site at
    www.adobe.com/go/supportportal or call (AUS) 1 800 614 863 or (NZ) 0
    800 485 948 for more information.
    >>http://www.adobe.com/go/supportportal
    General enquiries about Adobe
    communications:[email protected]
    >>mailto:[email protected]
    If you have a complaint, send it to:[email protected]
    >>mailto:[email protected]
    This email has been sent to [email protected]
    Message was edited by: OQOroger to indicate Adobe uses invalid addresses to customers who have already purchased the subject product

    You can refer to :
    Acrobat Learn & Support
    Installing, uninstalling Acrobat X | Mac OS
    Adobe Acrobat X Pro * Activation and registration
    http://www.adobe.com/content/dam/Adobe/en/accessibility/products/acrobat/pdfs/acrobat-xi-p ro-accessibility-best-practice…
    They are useful resources.
    Regards
    Rajshree

  • Java applets wont load in Safari and constantly crash in Firefox

    I have to use Java Applets to work from home. I normally use Firefox as my browser but since the last Java update Forefox keeps crashing. I have tried Safari too and it wont load the applets at all. I am desperate to get some work done but I can't get into my work files that are stored on my office's servers.
    I have seen lots of discussion about enabling java etc. in my browser and all of that has been done.

    Make sure your Java system is updated on both sides (home and work computers).
    As an alternative, you might look into a non-Java VPN solution. I use RealVNC (free for up to 5 computers) to work from home on my Macs and connetc to WinXP and Win7 systems at work. It works beautifully and I can connect to all 4 work systems simultaniously! The only thing the free version won't do is print remotely... so I print to PDF in my Dropbox and print that at home.
    For VPN, I use a Cisco RV042 4 port router (about $90 at BestBuy) and connect via the built in OS X VPN in the Network Preferences panel. It literally took less than 5 minutes to set up. Sweet, simple, minimal cost and setup, and I can work from the house 24/7 if needed.

  • Safari wont load any website

    I try to launch Safari and it just spins. I have tried the "reset safari" and still has not worked. It states that " safari could not open the page "http://www.mac.com/" because the server stopped responding."
    However, I am working on FireFox so the server is working. Help!
    iBook G4   Mac OS X (10.4.9)  

    the clock which was set to digital displays wrong time...i even set the time zone.
    If you open the Date & Time System Preferences, you can select an option to use a Network Time Server. Does selecting a Network Time Server keep the time correctly? (Of course, you will have to be online some time during the day for the time to update itself.)
    Also safari wont load any other website but apple start page
    What happens if you try to visit any other Web page? Do you see an error message? If you open the "Activity" window from the Safari > Window menu, do you see any activity running?
    my iphoto is allowing me to upload photos
    Do you mean to say that iPhoto is NOT allowing you to upload photos? Again, do you see any kind of error message? What does happen? Does your camera or memory card appear on the Desktop as a hard drive? Can you open the Image Capture application (from inside the /Applications/ folder) and use that to download some of the pictures to your Desktop or another location?
    If you use the Accounts System Preferences to create a new user, log out and log in as the new user, can they import pictures with iPhoto? Does Safari work correctly for the new user as well?
    -Doug

  • Java was blocked due to the threat I have followed the update & other options to reenable it ie.manual updates reinstalls yet websites like YouTube still wont load up.Works fine in Chrome & IE!

    Java was blocked due to the threat I have followed the update & other options to reenable it ie.manual updates reinstalls yet websites like YouTube still wont load up.Works fine in Chrome & IE!

    Your plugins list in "more system details" shows Next Generation Java Plug-in 1.6.0_31 for Mozilla browsers so Java should not be blocked.
    Could you post a link to a webpage where Java isn't working for you? YouTube uses Flash, not Java. Here is a list of Java test pages you can try, to confirm that Java is working, from http://kb.mozillazine.org/Java#Testing_Java
    * [http://www.java.com/en/download/help/testvm.jsp Test your Java Virtual Machine (JVM)] at java.com.
    * [http://browserspy.dk/java.php Java Information - BrowserSpy.dk]
    * [http://javatester.org/ Java Tester] - The test pages at javatester.org will tell you if your web browser is enabled for Java and, if so, the Java version.
    * [http://www.pinlady.net/PluginDetect/Java/ Java Plugin Detector]
    By the way, I see in your plugins list that you also have the VLC media player Web Plugin 2.0.0 so, it's possible that the VLC plugin is causing a conflict if YouTube or other videos don't work. See [[Video or audio does not play]] (you may need to disable the VLC Media Player plugin in the Add-ons -> Plugins list for some media to play).

  • Internet wont load a page

    Ok so I have jsut bought a new MacBookPro and love it, however sometimes my internet pages wont load. It continues to say loading untill it finally say cannot be opened etc etc but then i refresh it and it comes up normal.... Its not my internet connection becuase the other computers on the network are fine... its happening both in safari and firefox and its starting to give me the willies...

    HI,
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Could be a 3rd party plugins causing the problem. Go to ~/Library/Internet Plugins. Move any 3rd party plugins to the Trash and restart your Mac.
    Also, if you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
    Your profile indicates you are running 10.6.1. Download and install the 10.6.2 combo udpate available here. That will bring your system software up to date.
    http://support.apple.com/kb/DL959
    Carolyn

  • Photoshop cs2 wont load

    Hey having a problem with cs2, suddenly it wont load. It just bounces up and down in the dock and nothing happens, then it just stops bouncing.
    My computer slows down a bit while this happens. Image ready works fine however.
    I have a mac mini running os 10.4.11 with 2gb ram and a 1.83ghz intel dual core processor.
    Hope someone can help.
    James.

    hey looked at the crash report and this is what i got
    Mac OS X Version 10.4.11 (Build 8S2167)
    2014-07-24 18:38:45 +0100
    2014-07-24 18:38:49.435 SystemUIServer[261] lang is:en
    Jul 24 18:39:47 james-godsells-computer /usr/sbin/ocspd: starting
    dyld: Library not loaded: @executable_path/../Frameworks/AdobeXMP.framework/Versions/A/AdobeXMP
    Referenced from: /Applications/image and animation/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
    Reason: image not found
    2014-07-24 19:04:18.116 SystemUIServer[339] lang is:en
    Disk Utility started.
    Verifying volume “GOD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid node structure
    The volume GOD needs to be repaired.
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “GOD” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    Jul 24 19:27:13 james-godsells-computer authexec: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
    Repairing permissions for “GOD”
    Determining correct file permissions.
    Permissions repair complete
    The privileges have been verified or repaired on the selected volume
    Verifying volume “GOD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid node structure
    The volume GOD needs to be repaired.
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “GOD” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    Repairing permissions for “GOD”
    Determining correct file permissions.
    Permissions repair complete
    The privileges have been verified or repaired on the selected volume
    Disk Utility started.
    dyld: Library not loaded: @executable_path/../Frameworks/AdobeXMP.framework/Versions/A/AdobeXMP
    Referenced from: /Applications/image and animation/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
    Reason: image not found

  • IDVD 08 wont load up a project from iDVD 4.0.1

    Can anyone help me? I'm trying to make a DVD for me and my friends and we're on the verge of giving up. My friend made the DVD on his eMac on iDVD 4.0.1. The DVD wouldnt burn, it just popped the DVD out after putting it in the drive. Its probably his eMac's DVD burner, its plays DVDs but wont burn them. Anyways, so i got an external hard drive and put the DVD project on it. Now i've tried to upload it on my mac mini on iDVD 08 and it wont load. It Comes up with two messages. The first is this:
    "At least one of the themes used by this project is missing on your system. The default theme "Revolution Main" will be used instead."
    The next message is this:
    "Changing TV Standard
    Changing the TV standard will require iDVD to encode all previously encoded assets again."
    Then it just says "loading project: EvE SL 07.dvdproj" and since then nothing has happened.
    Is there anything that i was supposed to do that i haven't done? Like backup files or something? I really have no clue.

    I have the same problem - there is another thread around here where I put up the trace information but no-one seemed interested in helping.
    I have not been able to get anyone from Apple to show any kind of interest at all in fixing it.
    My next idea is to use the property editor to see what is in the project data (XML) that it could be complaining about. I would imagine that they have changed the meaning of an item or just moved it.
    *****.

Maybe you are looking for

  • Internet connects, but doesn't work properly

    I know there are a lot of topics on this, but mine is pretty specific. I'm using a Macbook I bought last August (Model Identifier MacBook4,1) and running OS 10.5.6 (I can't update to 10.5.7 because I`m having trouble connecting. Recently I noticed a

  • Unable to open PSE icons in PSE9

    I have PSE icons (JPG Files) in my Documents.  I click on the file in "Documents>open>"file folder number">open"  PSE 9 opens and I receive the message ("Could not complete your request because the file is locked.  Use the 'Properties' command in the

  • Drilldown configuration problem 8.1 - 8.0

    well the problem we have is this: We have a drilldown on a field of service request, and when we click it on siebel 8.0 it goes to another view (with the same BO, and BC) and shows the record clicked on a form applet with the controls to change the r

  • I have got macbook mac OSX - 10.5.8

    I have got macbook OSX - 10.5.8 with photoshop version 8.0. I want to buy snow leopard OSX 10.6 Will my photoshop works with leopard OSX 10.6?

  • OS4 problem; know similar Q's have been answered, but swear different

    I tried downloading OS4 on my desktop but was told could make backup b/c of too low memory for some reason (guessed it couldn't do archive of my whole iphone b/c it is a 5 y.o. computer). However, thought that was weird, b/c it has never had a proble