System11 batch loader license key

Hi all,
We are on System 11. When scheduling a batch we get a " Failed - 2620 - Batch loader license key is invalid - At line 28"
I was under the impression there are no license keys in System11.
Does anyone know what this error means? Ive had a look in the workbench but I cannot find an option to enter a license key.
Thanks for your help.
Seb

Not sure about v11, but this same message appears when using 9.3.1 if the Checkbox available through the Administration >Application Settings > Batch Loader menu item is not been ticked.

Similar Messages

How to load license key

I installed and configured vPostgres with a trial version and now I have a license key that I would like to apply without re-installing vPostgres. Is that possible, and if so, how?

Hi Mark,
Thanks for your question.
Page 23 of the vFabric Postgres User Guide has it.
https://www.vmware.com/pdf/vfabric-postgres-91-user-guide.pdf
Quote:
Add a License KeyThe vFabric Postgres database supports using a serial number in a file that you create in the virtual machine
(local license) and validating the license by communicating with the vFabric Suite license server (server-based
license).
You can install a local vFabric Postgres serial number in the guest operating system of the virtual machine or
virtual appliance.Procedure1 Log in as the root user.
2 Use your valid license key to create the
/etc/opt/vmware/vfabric/vf.vpg-serial-numbers.txt file, as in the following example.# echo "XXXXX-XXXXX-XXXXX-XXXXX-XXXXX [quantity=1, expiration=Permanent ]"
>> /etc/opt/vmware/vfabric/vf.vpg-serial-numbers.txt3 Change the group and file permissions.# chgrp vfabric /etc/opt/vmware/vfabric/vf.vpg-serial-numbers.txt
# chmod 640 /etc/opt/vmware/vfabric/vf.vpg-serial-numbers.txt
If vFabric Postgres does not find this file, it will attempt to use the vFabric license server. If the license server
does not respond, the vFabric Postgres server uses the remainder of the evaluation license if one exists.
The license key is picked up when the database is restarted. So either you can reboot the appliance or just restart the service as follows
# service aurora_mon stop
# service aurora_mon start
If you have more questions let us know.
Regards,
Jignesh

Batch Loader and Folders_g Question

I would like to use Batch Loader to load a large number of images into WCC. I am also using Folders_g in my implementation, and would like to instruct batch loader during asset loading run-time which folder in /Contribution Folders/ to place the asset. Does anyone know what the batch load file key / value pair is to make this happen?
Would I use something like this: (using dCollectionPath)
Action = insert
dDocTitle=Test Image
dDocAuthor=sysadmin
dSecurityGroup=Public
dDocType=Document
dInDate=10/25/10 9:58 AM
primaryFile=C:/Files/Test Image.doc
dCollectionPath=/Contribution Folders/images
<<EOD>>
Thank you,
Randy

Good Morning,
Thank you Anand and Srinath for helpful answers. Yes, the xCollectionID does work and I have it loading into the correct folder using that approach. However, I have several folders under the root /Contribution Folders hierarchy, and determining the xCollectionID of each or these subfolders prior to Batch Loader runtime and mapping the IDs to each of the nodes in the Batch Load File will be tedious. Furthermore, I will be building the Batch Load File on at least four different environments i.e. DEV, TEST, STAGING, and PRODUCTION, and determining xCollectionIDs for several folders across these environments will add even more complexity. I can do it, but was hoping for an easier path.
I am open to any more suggestions / ideas following your digestion of the previous information.
Let me throw one other question out there. Let's say I am able to load all my assets into the several folders in my folders_g hierarchy in my DEV environment using the mapping of xCollectionID. Am I able to migrate that folder structure with loaded assets downstream into TEST, STAGING, and PRODUCTION using some out of the box UCM utility? Does something like that exist?
Thank you,
Randy

Windows 2008 Server License Key not working on VirtualBox

I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded. What can I do to have this server activate correctly under the VirtualBox?
Thanks,
Tom

Hi Tom,
Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
internet and with KMS method please confirm this vm can communicate with your KMS server.
The related KB:
Understanding MAK Activation
https://technet.microsoft.com/en-us/library/ff793435.aspx
Volume Activation in Disconnected Environments
https://technet.microsoft.com/en-us/library/dd981010.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Transferring Coldfusion to a new server - Upgrade license; Can't find old license key HELP!!

I am currently in the process of porting over my data from another server to a new server.
On that server I am running ColdFusionMX7 Standard and want to continue running it on the new one.
Coldfusion is currently loaded on the new server through a trial edition but when I try and enter the Serial Number I see on the Coldfusion on the server I am currently operating, it prompts me that "You have entered an upgrade license key (XXXXXX-XXXXX-XXXXX-XXXXX), which requires you to enter the license key of your previous version of ColdFusion."
Do you have any advice on this? Is there any way to find that old license on the old server?
Thanks!

Contact support by web chat.
Mylenium

Localization type in license key

Hi All,
I am generating license key for my 8.8 PL03 installation. the license key generated is correct but when i load it, my license manager shows two localization. global and Indian. my localization of company database is that of USA. I am not able to assign the license. what is that I am doing wrong?
Thanks,
Binita

Hi Binita,
can you advise how your problem was resolved about dual license.
Thanks
Deepak

SAP License Key configuration procedure in Web AS(J2EE)

Hi,
We installed Web AS 6.4 (J2ee). It is running on temporary license and going to expire in one week time. I applied for license key and got the permanent license key as a text file attachment through email. It is a simple text file containing the license key, system NR and etc. I saved that text file into my machine.
I tried to configure that license file into Web AS using visual administrator.
Server 0 --> Services --> Licensing Adapter --> Install License from file
I selected the text file which was sent by SAP to my mail.
It is giving error like
License file C:\(license file name).txt contains an incorrect SAP license key: Header or empty line expected.
License key(s) not completely installed.
I don't know what to do now. I think we can do through this through cmd. But I don't know how to do that.
Shall I delete the temporary license? Will the system allow me to enter the value manually.
Can any one guide me on this?
Thanks.

Srikishan,
I am getting error lilke this.
D:\usr\sap\SID\SYS\exe\run>saplicense -install
SAPLICENSE (Release 640) ERROR ***
    ERROR:   Can not set DbSl trace function
    DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
    RC-INFO: error loading dynamic db-library - check environment for:
             dbms_type = <db-type> (e.g. ora)
             DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Any idea about it?
I set the system variable like
dbms_type = mss
DIR_LIBRARY = D:\usr\sap\SID\SYS\exe\run
But still getting the error.
Do I need to set dbms_type in environment variables? I don't know it's value. My db is MS SQL DB.
Thanks.

Demo License key issue in Cisco Content Secuirty managment Virtual appliance

Hi,
I have installed a Cisco content security management appliance for customer evaluation. I have downloaded 45 day demo license key but unable to update the license key neither in GUI nor in CLI. I have referred installation guide and user guide but did not helped at all.
Snapshot from GUI

Would suggest to re-copy and paste the XML license - as most likely you have extra white space that is causing the malform when pasting/loading. If using Windows, try avoid using wordpad --- and use Notepad++ or similar.
http://www.cisco.com/c/en/us/support/docs/security/email-security-virtual-appliance/118301-technote-esa-00.html
-Robert

Maintain license key for third party product in sap PI

HI,
I have install third party product in SAP PI SLD for an application,
How can i specify the key or license agreement for the third party product.
Where i have to maintain the key for Third party product in SAP PI.
Regards
Niraj

Hi Harish,
Deployed third party product in SAP PI Server which is Web UI(Application)
for initiating the integration process,But when i run the application
Its showing an error. "Error loading license agreement"
Regards
Niraj

I want to activate my windows 2008R2 64bit server getting error message is invalid license key

i download the windows 2008R2 64bit media from microsoft site and install it after that try to activate my key but error message coming invalid license key. pls help me.

if you are using a key and download form same area of the license ports you may just have a corrupt down load you can try to download again, or if you burnt the disk try buring a new copy at a slower speed. otherwise you should call your Microsoft licensing
professional to make sure the order went through as expected and you are downloading the proper image.
I don't think you can buy a 2008 r2 license anymore so I also assume you purchased 2012 r2 licensing and are you using a 2008 r2 key? the 2012 r2 key will not work with downgraded OS you need to get the key that matches the os from the licensing portal.

Website containing license key database + software on-line

I have written a java based application and want to create a website allowing purchasers of my software
to run the application on-line.
I want to be able to validate the username/password on-line and if okay allow my java software application
to be run.
Can anybody please tell me what software can I use that will offer me the following functionality
1) Website + ecommerce
2) Database housing license keys allowing for validation
3) Ability to load my java application onto my website + running software on-line.
I would appreciate some help as all the web creation software pakages I have seen just
have set format(pages) plus e-commerce BUT not the ability to load and run software on-line
using a validated license key database.
Thanks
Opjava
thw website after I have created it

m3kbx,
I believe this is one for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
This is a user to user forum.

Migration process License Key

Hello,
I've get an error during migration to Hana db.
During Create ICM userstore phase I get and error, and the output of saplikey.log is:
SAP License Key Administration - Copyright (C) 2003 - 2012 SAP AG
Could not install temporary license key - error code: 2.
E 96 likey_admin_clt: Couldn't get the list of all records from the persistence.
There is the errors in log
ERROR 2014-09-19 11:13:13.491
MSC-04120 Creating a license signature failed:
===...could not load SSF library D:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-09-19 11:13:13.491
MSC-04120 Creating a license signature failed: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("D:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-09-19 11:13:13.491
MSC-04120 Creating a license signature failed: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
Any suggestion?

Thanks Sriram,
sapinst.log
ERROR 2014-09-19 19:17:53.620
MSC-04120 Creating a license signature faileE:
===...could not load SSF library E:\usr\sap\\D00\exe\sapcrypto.dll .
ERROR 2014-09-19 19:17:53.620
MSC-04120 Creating a license signature faileE: 543 wlikey_sign_for_installer: Couldn't load SAPSECULIB ("E:\usr\sap\\D00\exe\sapcrypto.dll") using function SsfSupInitEx (), rc = 10 (no library).
ERROR 2014-09-19 19:17:53.620
MSC-04120 Creating a license signature faileE: 542 wlikey_sign_for_installer: At least one more attempt to load the SAPSECULIB will follow.
INFO 2014-09-19 19:17:53.932
Switched to user: Domain\h00adm.
INFO 2014-09-19 19:17:54.41
Creating file C:\Program Files\sapinst_instdir\NW740\HDB\COPY\SYSTEM\STD\AS-ABAP\saplikey.log.
INFO 2014-09-19 19:17:54.88
Switched to user: Domain\h00adm.
INFO 2014-09-19 19:17:54.228
Output of E:\usr\sap\H00\SYS\exe\uc\NTAMD64\saplikey pf=\\SAPTEST\sapmnt\H00\SYS\profile\H00_DVEBMGS10_SAPTEST -install_first_temp Q1050047872 XXXXXX is written to the logfile saplikey.log.
WARNING 2014-09-19 19:17:54.774
Execution of the command "E:\usr\sap\H00\SYS\exe\uc\NTAMD64\saplikey pf=\\SAPTEST\sapmnt\H00\SYS\profile\H00_DVEBMGS10_SAPTEST -install_first_temp Q1050047872 XXXXXX" finished with return code 2. Output:
SAP License Key Administration - Copyright (C) 2003 - 2012 SAP AG
Could not install temporary license key - error code: 2.
E 96 likey_admin_clt: Couldn't get the list of all records from the
persistence.
ERROR 2014-09-19 19:17:54.790
CJS-30023 Process call 'E:\usr\sap\H00\SYS\exe\uc\NTAMD64\saplikey pf=\\SAPTEST\sapmnt\H00\SYS\profile\H00_DVEBMGS10_SAPTEST -install_first_temp Q1050047872 XXXXXX' exits with error code 2. For details see log file(s) saplikey.log, dev_slic.
ERROR 2014-09-19 19:17:54.899
FCO-00011 The step createTempLicense with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_Temp_License_ABAP|ind|ind|ind|ind|lic|0|createTempLicense was executed with status ERROR ( Last error reported by the step: Creating a license signature faileE:
===...could not load SSF library E:\usr\sap\\D00\exe\sapcrypto.dll .).
INFO 2014-09-19 19:17:55.383
Creating file C:\Program Files\sapinst_instdir\NW740\HDB\COPY\SYSTEM\STD\AS-ABAP\__instana_tmp.xml.
INFO 2014-09-19 19:17:57.177
Removed file C:\Program Files\sapinst_instdir\NW740\HDB\COPY\SYSTEM\STD\AS-ABAP\instslana.xml.
INFO 2014-09-19 19:17:57.177
Creating file C:\Program Files\sapinst_instdir\NW740\HDB\COPY\SYSTEM\STD\AS-ABAP\instslana.xml.

Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com

How to Upload License Key File of MiniSap to SAP System ?

Hi,
I have received the license key for MiniSap. I have downloaded the license key file to my local system. Please tell me how to upload this file to the SAP system. I am using Windows XP (SP2) and the MiniSap edition is 6.10 WA1.
I have to tried to directly enter the license key through transaction code Slicense but got the error "Incorrect Parameter Specified". I also tried to install through OS level but even could not do so. I have ordered key 5 times, none works on either SAP level or the OS level.
Somebody told me to upload the file, Please Guide me how to upload license key file to the SAP System.
Thank You
Best Regards,
Ryan

Very late into the reply. But I am sure someone will run into this issue again -
In windows cmd prompt, navigate to c:\mbs.
Then type saplicense.exe -install then follow the prompt.
NOTE: If you get the following error -
C:\MBS>saplicense.exe -install
*** SAPLICENSE (Release 46D) ERROR ***
    ERROR:   Can not set DbSl trace function
    DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
    RC-INFO: error loading dynamic db-library - check environment for:
             dbms_type = <db-type> (e.g. ora)
             DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Type"C:\MBS>dbenv.cmd", once it is done. simply retype
saplicense.exe -install then follow the prompt.
Good Luck.
T.H.

Help!! license key

i down loaded the trial version of adobe, it keeps asking for a license key, i have no clue what they want,nor does anyone at adobe [in india]. all i want to do is print tax forms. can some opne please help me out.

You shouldn't need a serial number to run the free trial. See this screenshot of the type of thing should be looking for:
http://i979.photobucket.com/albums/ae279/Uoneko/screenshot2.png?t=1276113976
Then just pick the bottom option on that screen...

System11 batch loader license key

Similar Messages

Maybe you are looking for