Systemd-analyze error and consolekit problem.

Hi.
systemd-analyze
Traceback (most recent call last):
File "/usr/bin/systemd-analyze", line 3, in <module>
import getopt,sys,dbus,os
ImportError: No module named dbus
dbus is on and working well,so why system.d whining?
Execpt this ugly output there is not visible consequeces regarding dbus
dbus.socket loaded active running D-Bus System Message Bus Socket
Next case is cosolekit.
#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec startxfce4 --with-ck-launch
This works good in matter of sesion menagment like power off,suspend,reboot but i can't mount drives via thunar volman. Without "--with-ck-launch" i can mount everything without problem,but session managment goes on vacation.
Help pls.
Some more info:
% groups
lp wheel games video audio optical storage scanner users
Installed packages regarding policy managment:
extra/polkit 0.105-1
polkit-gnome 0.105-1
thunar-volman 0.8.0-1
consolekit 0.4.6-4
udisks 1.0.4-5
udisks2 1.94.0-2

birdflesh wrote:Regarding your first issue, check out systemd's optional dependencies.
Thx.
One problem solved,one to go.

Similar Messages

Regarding Workflow Error and Notification problem

Hi,
I am working on Workflow. I imported data first time in Data Manager and created new workflow. Now while "Launching" this workflow it is showing error "The record is currently used in workflow".
I was using this repository for other data with different workflow but i deleted all previous data and workflow. Why it is showing this error? When i have new set of data with new workflow than i think i should not show this error.
Other Question is regarding Notification:
To notify the person we have to make following changes :
1) Have to use Notify stencil and have to give e mail ids in User detail
2) In my server ini file i have to give my mail server name.
After making this changes I am not getting any mails. Please guide me for the same.
Please guide me how to rectify this error and what are the prerequisites?
Thanks in advance,
Ronak

Hi Ronak,
Couple of issues with emailing:
1. You need to restart your repository after updating .ini file to effect the changes.
2. Your SMTP server should relay mails without SMTP authentication.
3. You can also send emails to outside domains such as yahoo or others if your SMTP server permits.
Check with your mail server administrator and perform a simple SMTP telnet test to make sure your SMTP server is not an issue.
Hope this helps
Venkat

Adobe Application Manager Download Error (and other problems)

Last week I purchased a Creative Cloud membership (Student and Teacher Edition, if that matters at all). When I tried to download applications, the Adobe Application Manager seemed to be unable to connect and instead displayed "Download Error. Press Retry to try again or contact customer support." I read some of the responses to this problem on the forums, and after trying several things, I got it to work (I'm honestly not sure what I did that caused it to work). However, it is now failing to work again and I can't seem to fix it this time. As an additional problem, When I tried to open Adobe Premiere Pro (which I managed to download when I got the App Manager working for a while), I got the opening screen that asked me to open a project or start a new project. No matter what I clicked on, Premiere Pro closed with an error message. Just as with the App Manager (and at the same time), I managed to get Premiere Pro to work (it seemed to work after I set permissions so I thought I solved it), so I was able to use it for a day. However, now the problem has returned.
I don't know if these two problems are related, but they started working at the same time and stopped working at the same time, so I'm posting them together in case there is a connection. I am running Windows Vista on my home computer. I can sign on to the creative cloud online without problem so it recognizes me as a creative cloud subscriber. My Internet connection is working fine. I have disabled all firewalls and it still doesn't work. Very frustrating, obviously.
Thanks for your time and any help or suggestions you can give.
- KP

Kardypaine for your Internet configuration difficulties I would recommend reviewing Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html.
For the failure of Premiere Pro to open you will want to review the install log to see if you received an installation error. You can find details on how to locate and interpret the installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

New layout, CSS errors and Firefox problems

Hi
Could it be that some of the Firefox problems are caused by:
1) The wrong mime type for the CSS files? Currently it appears to be:
application/x-css
shouldn't it be
text/css
2) Errors in the CSS files and inline CSS of.
http://forums.oracle.com/forums/categoryHome.jspa?categoryID=84
Can recommend using:
http://jigsaw.w3.org/css-validator/
==== New layout ======
The border error on the download button has been fixed, but the alt attribute of the upper right search icon is still "faq", shouldn't it be "Search"
<img src="images/search-16x16.gif" width="16" height="16" border="0" alt="Search">
Axel

There are a number of fixes still to be made, but most of them will wait until our upgrade (still a few months out).

CRC Errors and Sound Problems

Everytime I try to install something from my CD drive I get CRC errors. I sometimes get sound distorsions when I'm playing but those are not permanent and the original sounds come back after a couple of minutes. Can you help me fix this.
Intel P4 2.6
MSI 865PE Neo2
Radeon 9800 Pro
OCZ EL DDR PC-3200 / 400MHZ / Platinum / Dual Channel (2x512)
Maxtor SATA 80 Gig
CD Rom Creative 52X
LG DVD / CD Writer Combo 16X / 52X

Quote
Originally posted by Starscream
I'm using Slow performance and I just bought my computer. The problems started the first time I tryed to install XP Pro and never stopped after that.
No offence.....
Gen copy of XP Pro???????
This does not sound like a MainBoard issue............???? But will help all I can.
Del

Edge Animate causing Server Time Out Error and other problems

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Fetch error and jaxb problem in weblogic 12c

Hi,
I have a problem with running my webService in Weblogic 12c. The response of the webService is an entity which has an OneToMany relationship. After executing the service, its response could not be generated. I think there is a problem during MOXy’s unmarshalling operation of response entity (I haven’t had any problem in weblogic 11, because it don’t use MOXy ).
What do you think about this problem and solution?
Regards
Edited by: Elham on May 27, 2012 12:51 AM

Note that WebLogic 12c endorses JavaEE6.
Look ups and how JNDI works is explained in the JavaEE6 tutorial: http://docs.oracle.com/javaee/6/tutorial/doc/gipjf.html

Help - Out of Memory error and intermittency problem in OIM

Hello to all.
I'm having some problems in my environment and I would drive to identify the real problem.
The environment I am using for the reconciliations is always the problem of out of memory, and often after this problem began to appear another problem of out of memory that is: java.lang.OutOfMemoryError: PermGen space
And when this problem started to appear also in the parallel User warned me of a problem he is going to happen in the following way, the User log in with your User OIM Web, but when we try to do any action, by clicking the users to search for example, the system of the message as if it had timed session, and it happens every time.
What has been there, when I looked in the log did not identify the cause of the problem, someone would tell me as a starting point, because I do not know what to do.
A doubt, we apply some patches that were described in doc.id 553266.1 (6685235, 5389650, 6454278, 6880142, 6808170),
patches that can be applied in a random or should be applied in order.
Sorry for my English, but my level is not very advanced.
Thanks,
Victor

Hi,
We also used to have memory problems earlier. The root cause was the memory grantinted to the JVM. We can configure the memory parameters from the application server.
In JBoss, we do it in following way:
File: [SERVER_HOME]/bin/run.conf (Linux box)
Line: JAVA_OPTS="-XX:PermSize=128M -XX:MaxPermSize=256M -Xms1280m -Xmx1280m"
You could try increasing the MaxPermSize to say about 2 GB. This should reduce the Out Of Memory Exception.
N.B.: If you done have the JAVA_OPTS as mentioned above, then try using the the way I am using it. It might help.

Error and downloading problem

I tried to download a song from iTunes but it says "stopped (err = 450)". When I try to download it again it says that i should check that the connection to the network is active(even though my internet is fine) and that an unknown error occurred (450). what can i do to get the song downloaded?
Windows Vista

Connecting to the internet isn't the same as connecting to The iTunes Store. You have to make sure you aren't blocking the ports needed for iTunes. These article should help:
iTunes for Windows: Connection Issues when using Internet Filters, Accelerators , or Firewalls
http://www.info.apple.com/kbnum/n93434
iTunes for Windows: Possible iTunes Store errors
http://www.info.apple.com/kbnum/n93431
Using MSCONFIG to troubleshoot conflicts in Windows
http://www.info.apple.com/kbnum/n302538

Getting error and connection problems with iPad and DLink DI-634M router

We're seeing spotty connectivity from our iPad - sometimes it works fine, other times it can't get to any websites. Looking at our wireless router logs, I found a bunch of messages like this for the iPad's address:
"Blocked incoming TCP packet from 192.168.0.140:52023 to 74.125.0.222:80 with unexpected acknowledgement 3307518865 (expected 3307530074 to 3307595610)"
What does this indicate and how can I fix it?
Searching a bit, I found recommendations to disable SPI on the router's firewall, but I don't see any option for doing that on the DI-634M's admin pages.
Any help appreciated - thanks.

We're seeing spotty connectivity from our iPad - sometimes it works fine, other times it can't get to any websites. Looking at our wireless router logs, I found a bunch of messages like this for the iPad's address:
"Blocked incoming TCP packet from 192.168.0.140:52023 to 74.125.0.222:80 with unexpected acknowledgement 3307518865 (expected 3307530074 to 3307595610)"
What does this indicate and how can I fix it?
Searching a bit, I found recommendations to disable SPI on the router's firewall, but I don't see any option for doing that on the DI-634M's admin pages.
Any help appreciated - thanks.

SLiM and ConsoleKit: enable CONFIG_AUDITSYSCALL in your kernel!

Good day.
This forum has seen a number of threads concerning SLiM and ConsoleKit problems over the last few days, many of them involving yours truly suggesting replacing SLiM with a different display manager such as LXDM.
Now, slim IS in fact an abandoned piece of software (both upstream and currently also with respect to archlinux specifically) and as such, replacing it with something else is still an eminently sensible thing to do -- but I've just happened upon what seems to be the core of the problem for those of us who were in fact having these ConsoleKit problems. SLiM relies on the pam_ck_connector.so module for its interaction with ConsoleKit and since consolekit-0.4.2 really needs CONFIG_AUDITSYSCALL enabled in the kernel. That option enables /proc/$PID/sessionid and it's that ID which the module uses to determine if a session is local. Without the /proc file present, you would see two sessions in the output of ck-list-sessions (run from a terminal in X) neither of which had both active=TRUE and is-local=TRUE, but with it present, the session with x11-display-device='/dev/tty7 will in fact have active=TRUE and is-local=TRUE.
Until very recently, this problem was hidden from view for many of us by local polkit files installed by xfce4-session and thunar and only surfaced when the current versions of these packages deleted those local tweaks, relying on a correct ConsoleKit setup to keep things working. Symptoms of it not working anymore ranged from all of a sudden being unable to reboot and shutdown from the XFCE logout dialog, Thunar having assorted mounting problems, Brasero failing to eject after a burn and so on. I just checked, and the arch default kernel does have CONFIG_AUDITSYSCALL enabled which means that the problem should, largely, be considered to have been just a user problem. Now, frankly, with this stuff as poorly documented as it is, I won't hold it against me, but still...
If you're like me, you probably won't actually enjoy LXDM much and now that I know what the problem is, I'll probably go back to SLiM for the time being. Do note the bit about SLIM being a dead project though, and decide for yourself.
Google-TAGS: arch linux, slim, reboot, shutdown, thunar, not authorized, brasero, cannot eject, consolekit, polkit
Last edited by rene (2011-11-12 05:27:14)

Thanks for the information!

Analyzer has encountered a problem error

some of our PC's are suddenly reporting an error stating - "analyzer has encountered a prblem and needs to close we are sorry for the inconvenience." The event logs have several zen errors most coming from sources listed as Novell.Zenworks.Logger, Application Error, and Userenv. If we remove the zen agent it seems the problem goes away. Has anyone seen this problem and know how to fix it as I can't find hits on it anywhere.
Thanks in advance
Hazel

rodriguezh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

[SOLVED]systemd-analyze startup delay problem

Hello,
i have a problem that my systemd-analyze shows me "Bootup is not yet finished. Please try again later." when im up in my fully functional desktop, because it wants to wait 1min and 30 before it finishes the "boot"
systemd-analyze
Startup finished in 3.482s (kernel) + 1min 30.058s (userspace) = 1min 33.541s
the userspace always takes that amount of time. while it actually takes ~12 sec to load with all set up. working network and stuff like that.
systemd-analyze blame
1.426s dkms.service
215ms ModemManager.service
207ms NetworkManager.service
193ms systemd-fsck@dev-disk-by\x2duuid-c9582b14\x2de7f5\x2d4496\x2dbc09\x2d7be584a182f4.s
148ms systemd-fsck@dev-disk-by\x2duuid-37962c3c\x2dcb8c\x2d4bb4\x2da27a\x2d58e852dcb643.s
85ms systemd-logind.service
78ms mnt-stuff.mount
77ms upower.service
68ms systemd-tmpfiles-clean.service
54ms systemd-modules-load.service
52ms polkit.service
52ms systemd-udev-trigger.service
47ms systemd-binfmt.service
47ms kmod-static-nodes.service
44ms mnt-downloads.mount
44ms dev-hugepages.mount
44ms dev-mqueue.mount
44ms systemd-vconsole-setup.service
43ms systemd-sysctl.service
43ms sys-kernel-debug.mount
41ms udisks2.service
25ms [email protected]
24ms lm_sensors.service
15ms cpupower.service
14ms alsa-restore.service
10ms systemd-journal-flush.service
8ms systemd-remount-fs.service
6ms systemd-user-sessions.service
6ms systemd-tmpfiles-setup.service
5ms systemd-tmpfiles-setup-dev.service
5ms rtkit-daemon.service
4ms systemd-update-utmp.service
4ms sys-fs-fuse-connections.mount
3ms proc-sys-fs-binfmt_misc.mount
3ms tmp.mount
1ms sys-kernel-config.mount
1ms systemd-udevd.service
1ms systemd-random-seed.service
nothing weird here(i think)?
systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @1min 30.058s
└─multi-user.target @1min 30.058s
└─dkms.service @875ms +1.426s
└─basic.target @869ms
└─timers.target @627ms
└─systemd-tmpfiles-clean.timer @627ms
└─sysinit.target @626ms
└─sys-fs-fuse-connections.mount @8.291s +4ms
└─systemd-modules-load.service @61ms +54ms
└─systemd-journald.socket @58ms
└─-.mount @57ms
└─system.slice @101ms
└─-.slice @101ms
as you can see multi-user.target and graphical.target starting at 1.30 only... allthough i dont even understand why they start at that time..cause my graphical interface is long time up already as well as my user account.
here svg of systemd-analyze plot: https://dl.dropboxusercontent.com/u/28788188/boot.svg
if anybody has some idea what might cause this i would really appriciate the help.
its just seems a cosmetical issue though. since my actual boot is around 13 sec from grub to fully functional desktop.
Last edited by xpander (2013-09-27 14:45:30)

WonderWoofy wrote:
These kinds of delays can happen when a service is bound to a particular piece of hardware.
So as an example the [email protected] uses "BindsTo=sys-subsystem-net-devices-%i.device". So when you enable [email protected], the part between the '@' and '.service' is what it will use in place of the '%i' of the BindsTo parameter.
This was a common problem when there was the change from the old kernel namespace used for network devices to the persistent udev naming scheme. During installation (or any time one was in the live media), it would use dhcpcd@eth0, so it would make sense that enabling dhcpcd@eth0 would set you all up for a nice ethernet connection when you launch the system for the first time. But then the 80-net-slot-names.rules udev file would change the interface name, making the BindsTo parameter time out after a while, since it would not be named something like enp2s0.
See if there are any failed units in the output of systemctl. Of course you will have to do this after systemd claims to have "finished" booting.
thanks, will digg into that. i do have some renaming policy there.. cause i have eth0 shown in ifconfig for example
i remember i did something about it in the past, because i never got used with the new naming scheme.
anyway systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
fluidsynth.service loaded failed failed FluidSynth Daemon
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
and that fluidsynth is no issue. cause with this installed, it still does same. i have fluidynth uninstalled because my pulseadio doesnt work when that is enabled

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Systemd-analyze error and consolekit problem.

Similar Messages

Maybe you are looking for