Systemd multiseat with NVidia card and Intel integrated graphics
I'm trying to set up multiseat Gnome 3 on a system running the nvidia proprietary drivers. The first seat on the nvidia GPU is working fine. For the second seat I'm trying to use an integrated Intel GPU, but all I get is the GDM "Oh no, something has gone wrong" screen. I'm not sure why, but I suspect it could be because the intel driver is also trying to load nvidia's libglx.so:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org X Server 1.16.1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Release Date: 2014-09-21
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X Protocol Version 11, Revision 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Build Operating System: Linux 3.16.1-1-ARCH x86_64
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Current Operating System: Linux comp1 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4ed01629-9f62-4642-8815-66a9ef652965 rw quiet
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Build Date: 21 September 2014 10:53:13AM
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Current version of pixman: 0.32.6
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Before reporting problems, check http://wiki.x.org
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: to make sure that you have the latest version.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Markers: (--) probed, (**) from config file, (==) default setting,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) from command line, (!!) notice, (II) informational,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) Log file: "/dev/null", Time: Wed Oct 15 21:47:02 2014
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) Using config file: "/run/systemd/multi-session-x/seat1"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No Layout section. Using the first Screen section.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No screen section available. Using defaults.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) |-->Screen "Default Screen Section" (0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) | |-->Monitor "<default monitor>"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No monitor specified for screen "Default Screen Section".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Using a default monitor configuration.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Option "DontVTSwitch" "True"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Option "AutoAddDevices" "True"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Automatically adding devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Automatically enabling devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Automatically adding GPU devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) The directory "/usr/share/fonts/OTF/" does not exist.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) FontPath set to:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/misc/,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/TTF/,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/Type1/
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) ModulePath set to "/usr/lib/xorg/modules"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) The server relies on udev to provide the list of input devices.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: If no devices become available, reconfigure udev or disable AutoAddDevices.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loader magic: 0x818d80
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module ABI versions:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org ANSI C Emulation: 0.4
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org Video Driver: 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org XInput driver : 21.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org Server Extension : 8.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) systemd-logind: failed to get session: PID 323 does not belong to any known session
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) xfree86: Adding drm device (/dev/dri/card0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "glx"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module glx: vendor="NVIDIA Corporation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 4.0.2, module version = 1.0.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Server Extension
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched intel as autoconfigured driver 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched modesetting as autoconfigured driver 1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched fbdev as autoconfigured driver 2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched vesa as autoconfigured driver 3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Assigned the driver to the xf86ConfigLayout
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "intel"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module intel: vendor="X.Org Foundation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 1.16.1, module version = 2.99.916
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Video Driver
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: ABI class: X.Org Video Driver, version 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "modesetting"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Warning, couldn't open module modesetting
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "modesetting"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading modesetting
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to load module "modesetting" (module does not exist, 0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "fbdev"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Warning, couldn't open module fbdev
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "fbdev"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading fbdev
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to load module "fbdev" (module does not exist, 0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "vesa"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module vesa: vendor="X.Org Foundation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 1.16.0, module version = 2.3.2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Video Driver
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: ABI class: X.Org Video Driver, version 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) VESA: driver for VESA chipsets: vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Falling back to old probe method for vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Creating default Display subsection in Screen section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: "Default Screen Section" for depth/fbbpp 24/32
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Depth 24, (--) framebuffer bpp 32
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): RGB weight 888
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Default visual is TrueColor
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output VGA1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output VGA1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI2 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI3 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP2 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP3 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Using a maximum size of 256x256 for hardware cursors
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output VIRTUAL1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output VIRTUAL1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Output HDMI1 using initial mode 1280x1024 on pipe 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): TearFree disabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): DPI set to (96, 96)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading sub module "dri2"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "dri2"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module "dri2" already built-in
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading sub module "present"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "present"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module "present" already built-in
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "vesa"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Depth 24 pixmap format is 32 bpp
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Backing store enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Silken mouse enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): HW Cursor enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): DPMS enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] Setup complete
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] DRI driver: i965
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] VDPAU driver: i965
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): direct rendering: DRI2 enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): hardware support for Present enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): display hotplug detection enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) RandR disabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): switch to mode [email protected] on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Setting screen physical size to 338 x 270
Unfortunately the config file for the second X server is /run/systemd/multi-session-x/seat1, which is not persistent. Is there any other way to get a different config file to the second X server, so I can force it to load the default libglx.so?
For completeness, output of seat-status is as follows:
seat1
Sessions: *c1
Devices:
├─/sys/devices/pci0000:00/0000:00:02.0/drm/card0
│ drm:card0
└─/sys/devices/pci0000:00/0000:00:02.0/graphics/fb1
[MASTER] graphics:fb1 "inteldrmfb"
One thing you can do to ensure highest perfomance on games is go to the Nvidia Control Panel, Manage 3D Settings, Programs, then find the game you want and set it to use only NVIDIA High Performance (or Discrete) graphics. You can't use both cards at the same time as of writing this (DirectX 11), but with the arrival of Windows 10 and DirectX 12 on July 29 you will be able to use both at once to increase performance. Until then, though, it is simply not possible to use both at once. The best option is to just use the GTX 860M.
Similar Messages
-
HP Envy j120tx with NVIDIA Geforce 740m & Intel HD Graphics 4600
There is some issue with the graphics of my laptop. In normal operations graphics are fine but when it comes to commnand prompts or windows screen the display text is totally blured. i updated the driver too but it didnt work !
PFAHello @Ketan_22,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the graphics on your notebook computer operate in a blurred manner when it comes to command prompts and system windows, and I would be happy to assist you in this matter!
First things first, I recommend returning your system back to a restore point before windows and command prompts became fuzzy. This can be done by following this document on Using Microsoft System Restore (Windows 8).
If these windows still appear blurred, the drivers may need to be re-installed. To ensure all of your system's drivers are functioning correctly, you can install the original software and hardware drivers for your computer. To do this, please follow this resource on Using Recovery Manager to Restore Software and Drivers (Windows 8). Once the drivers are installed, please update them by Using HP Support Assistant (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
T530 with 2 display adapters - NVIDIA NVS 5400M and Intel HD Graphics 4000 Drivers not loading
Both the Nvidia and Intel graphic drivers show in device manager that they have problem and can't load properly. I have tried uninstalling both they both reinstalled on a reboot with same issues. Is this hardware or corrupt drivers?? Or?
Failure progressed to a point where I could login remotely (GoToAssist) and see the screen but the LCD and External Monitor both were black.
Called tech support, they dispatched a tech (after 3 days, and a bunch of phone calls). They replaced the system board and display board? same problem. Their answer was I needed to reimage the machine.
I found out that Windows had done an update. We did a system restore to before the update (30 some updates) and restored the local displays.
BUT....both the NVidia and Intel HP Graphics devices in Device Manager indicate problems. And this was after reinstalling the video drivers I pulled down from Lenovo.
Any thoughts on where I go next?? Lenovo has washed their hands of this problem....
I am about to wash my hands of Lenovo as a vendor for PCs.
Larry -
Repeated error from Intel integrated Graphics card in my brand-new B320
Hi
I am getting repeated errors from the Intel Integrated Graphics card (on the Intel i3 chip as I understand it) in my brand-new B320.
I checked via a tool from Intel that my drivers were up-to-date (version 15.22.1.2361).
I checked via Device Manager Update Drivers that my driver was up-to-date.
I attempted to uninstall and re-install my driver BUT the uninstall reverted me to a VGA Adapter (so my screen was then running in a low res 800x600 mode!) and I could not even then see the Intel Integrated Graphics card in Device Manager to be able to re-install the driver against (even if I ran scan for new hardware): I had to restore to a System Restore Point - so the problem has of course come back.
I have even had one error where the screen then went completely blank and nothing would bring it back: I had to power off the PC (Ouch!)
PLEASE advise how I rectify this incredibly frustrating problem step-by-step.hey johnestlea,
i was going through the download list of the B320 here : http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=156819
And could not find any driver with the version 15.22.1.2361 for the Intel Integrated Graphic Card. Where did you get that version ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics
With my windows 8.1
If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
the windows can't open unless I uninstalled one of them
but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
and the most of games Intel can run it but AMD can
Help !!
Now I'm installing The two cards but if i restarted my laptop it wouldn't run
The photo show that ...
http://www3.0zz0.com/2015/04/07/21/289209638.pngHi there @ZezoOo
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
Please see the following, for some guidance. HP Products - What If I Don't See My Operating System?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Stock kernel isn't compatible with nvidia-dkms and nvidia-hook?
Hello pals
I'm using linux-ice, linux-lqx and linux-ck kernels with nvidia-dkms and nvidia-hook. Everything is ok, with kde upping.
I've started from stock kernel. During the dkms (or hook, I don't remember) pacman says that nvidia and nvidia(dkms or hook) were incompatible... remove nvidia? I've selected yes
After it, stock kernel don't upps the kde... stays on black screen. Login on tty1, 2 or 3 is possible, with ctrl+alt+F1...F3, but, kde with kernel don't works
no errors appears.
to force stock kernel been compiled by hook, I wait a while, when using the other kernels, and yesterday I did a "Syyu"
new kernel, new linux-headers too... but still blank screen
I only can use stock kernel and Nvidia driver, not dkms/hook installed one?Ok, i know little about dkms / mkinitcpio hooks , but best option seems to try and build the nividia module manually to get more info.
nvidia-hook gets sources from here : https://github.com/alucryd/mkinitcpio-hooks/ ,
build ()
_version=$(pacman -Qs '^nvidia$'|sed 's/^[^ ]* \|-[0-9]*$//g;2d')
echo "Building nvidia modules for ${KERNELVERSION} kernel..."
dkms install nvidia/${_version} -k ${KERNELVERSION}/_arch
echo "Ok."
help ()
cat<<HELPEOF
This hook rebuilds nvidia modules. It does nothing to the initrd image.
HELPEOF
looks like all the hook does is run dkms install, try running that command manually to get more info. -
I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!
Please give us more specific information -
What make/model camcorder are you using?
Are you absolutely certain this is AVCHD video? Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
Why are you attempting Log & Transfer from a card reader instead of from your camcorder? Have you tried doing Log & Transfer from your camcorder?
Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
Are you using FCE 4.0 or FCE 4.0.1? -
Order Miix 2 10 With sim card and 3G support
Hi,
I want order and buy Miix 2 10 With sim card and 3G support, please help me how i can order this tablet with these features?
i'm not in us/canada.
thanks in advance.
Moderator comment: Please refrain from bumping your thread(s) / post(s) more frequently than 3 days. Doing so, unfairly, pushes other members' threads downwards. Bumping post(s) removed.As long as it's not a Verizon iPad, sure.
-
I have a anion ixus camera with sd card and an iPad mini. I'm going travelling and need a way to upload pics to a cloud or Dropbox. Any help would be great.
That should read canon
-
Revision: 14001
Revision: 14001
Author: [email protected]
Date: 2010-02-05 08:52:14 -0800 (Fri, 05 Feb 2010)
Log Message:
Per discussions with the AIR and AIR integration teams, we will no longer throttle framerate to '1' fps
by default for Flex AIR applications.
QE notes: None
Doc notes: None
Bugs: SDK-25126
Reviewer: Ryan
Tests run: Checkin
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-25126
Modified Paths:
flex/sdk/branches/4.x/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
flex/sdk/branches/4.x/frameworks/projects/airspark/src/spark/components/WindowedApplicati on.asMy i7 rig is with a socket 1156 board, an Asus P7P55D mobo, and an 860 CPU. I know the Corsair DDR3 memory @ its stock 1.65v simply doesn't run at 1600mhz like it says on its box - 1333mhz seems to be its stability wall.
I upgraded my Q6600 and Asus P5B deluxe rig because so many people said to never consider overclocking on an editing rig. Was that over-cautious advice? -
Loss 3D graphics and can't connect to external display with NVIDIA card
I note this morning that the graphics in 3D mode of iWork (version 4.1 with system 10.6.8) no longer appears in all software suite. The 2D graphics are displayed perfectly. I also notice I can't connect an external display when I am on NVIDIA card but work well with Intel card.
The 3D graphics are printed but not displayed on the screen (it also appear inthe thumbnail). It seems to be a worry to display.
I posted two screen images showing the problem of 3D in Pages.
Link :
http://www.flickr.com/photos/94407289@N00/6105793305/
and
http://www.flickr.com/photos/94407289@N00/6106332902/
What's going on? and can someone help me because I have a report?Hello lolthisnameisnttaken,
Based on your post it seems you're having an issue with an external display. The following article may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
Bumblebee Setup on an Asus N56VM w/ Nvidia GT630M and Intel cards
My computer is an Asus N56VM - 64bit, EFI boot computer with hybrid graphics. The output of "lspci | grep VGA" is
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
I have had the computer for a while without considering actually configuring the graphics fully, but I recently discovered bumblebee, and followed the instructions on the archwiki to install it for use with the intel and nouveau drivers (no nvidia drivers because of EFI, though if anybody want to tell me the easiest way to get those proprietary drivers working on my system even if it means making my computer boot from BIOS again, that'd be nice, ha). However, after installing it, and doing 'systemctl enable bumblebeed.service' successfully and rebooting, I cannot use optirun. When I try:
$ optirun -vv glxgears
[ 2003.553898] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 2003.554287] [INFO]Configured driver: nouveau
[ 2003.710327] [DEBUG]optirun version 3.0.1 starting...
[ 2003.710366] [DEBUG]Active configuration:
[ 2003.710374] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 2003.710381] [DEBUG] X display: :8
[ 2003.710387] [DEBUG] LD_LIBRARY_PATH:
[ 2003.710394] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 2003.710400] [DEBUG] VGL Compression: proxy
[ 2003.819499] [INFO]Response: No - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 2003.819515] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
[ 2003.819520] [DEBUG]Socket closed.
[ 2003.819531] [ERROR]Aborting because fallback start is disabled.
[ 2003.819536] [DEBUG]Killing all remaining processes.
I've looked for solutions related to the error message, but they have all involved getting rid of a section in the xorg confs which doesn't exist on my machines (https://bbs.archlinux.org/viewtopic.php?id=141729). I have these packages installed which are related to bumblebee or my video drivers:
bumblebee 3.0.1.4
nouveau-dri 9.0.1-1
xf86-video-nouveau 1.0.4-1
lib32-nouveau-dri 9.0.1-1
xf86-video-intel 2.20.16-1
intel-dri 9.0.1-1
lib32-intel-dri 9.0.1-1
bbswitch-git 20120116-1
mesa 9.0.1-1
Perhaps unrelated is the fact that I don't believe the Nvidia card is powered off at boot. The wiki seems to imply that when bbswitch is installed, bumblebeed will turn the card off at boot, but the nouveau module is still loaded at start up ('lsmod | grep nouveau' still has entries and 'echo OFF >> /proc/acpi/bbswitch' doesn't work). I haven't been able to find much useful information about where to go from here, so I've tried to throw up as much information as I can that might be related. I understand trying to deal with hybrid graphics is a hassle, but I appreciate any help in getting it configured correctly so that optirun and power management work. I'll be happy to provide any more information that might help. Thanks!
Last edited by gwaar (2012-12-23 23:33:15)Apply the below patch to your /etc/bumblebee/xorg.conf.nouveau (from bumblebee git)
diff --git a/conf/xorg.conf.nouveau b/conf/xorg.conf.nouveau
index 9bf92fc..506d150 100644
--- a/conf/xorg.conf.nouveau
+++ b/conf/xorg.conf.nouveau
@@ -2,6 +2,8 @@ Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0"
Option "AutoAddDevices" "false"
+ # Prevent device detection from failing in Xorg 1.13
+ Option "AutoAddGPU" "false"
EndSection
Section "Device" -
Strange behavior with Cisco AP and Intel 3945 wireles card
Hi,
I have an interesting problem with an Intel 3945 A/G card, and my cisco APs.
1. Given:
Cisco 1100 and 1200 AP running IOS 12.3.8-JEA
Two laptop, one with Intel 2200 MPCI Card, the other with Intel 3945 MPCI Card
Microsoft AD with IAS radius server
a. 1 SSID with Simple EAP-TLS configuration Enterprise WPA/TKIP, no vlans, broadcast SSID. both card associate correctly and operate normally.
b. 2 SSID, 1 with simple EAP-TLS configuration Enterprise WPA/TKIP (broadcast), and 2nd SSID Open/No encryption/No authentication (not broadcasted), both cards associate correctly and operate normally.
c. 2 SSID, 1 with simple EAP-TLS configuration Enterprise WPA/TKIP (broadcast), and 2nd SSID WPS-PSK (not broadcasted), both cards operate normally.
Now it gets interesting:
c. 2 SSID, 1 with EAP-TLS/WPA Enterprise on its own VLAN 102, 2nd SSID Open/No Encryption/No authentication on a separate VLAN 105, VLAN 1 is used for admin and radius backhaul to IAS.
If both SSID are broadcasted via mbssid guest-mode both Intel cards work as expected
If neither SSID are broadcasted, both Intel cards work as expected
If either SSID is broadcasted via normal guest-mode command, the Intel 2200 associates and works correctly, but the Intel 3945 refuses to assocate to the AP.
Has anyone heard of side-effect?
AlanI'm seeing a similar issue with the 3945 right now. However in my example the following is the case;
APs are 1200 series IOS upgraded running 802.11b interfaces only. There are multiple SSIDs NONE of which are broadcasting.
We've got a few different client types. The Cisco CB21ABG cards are fine, as are the Intel 2200 and 7920 phones. It's only the 3945 that has a problem and it's running Intel's 10.5.1.68 driver which is the latest. I'm considering downgrading it to an older driver.
Anybody got a definate fix for this Intel card??? -
X11 won't start (sets monitor to standby) with nVidia card
Hello everyone!
I'm having some trouble getting my computer to work properly. Yesterday it was working perfectly, but today it would't start again. After some troubleshooting I've determined that the problem lies with X11 and the graphics driver. The bootloader, grub, and arch itself, boots perfectly in runlevel 3, but the moment you run "startx" it would appear to be loading for a while and finally the screen goes to standby mode and there is no way out of that other than reseting the computer using the reset button. I've tried uninstalling the nvidia drivers and installing nouveau drivers, but it still won't start X, this time arround, it would just hang up with a white screen.
I've also tried removing xorg.conf and also using nvidia utility to generate a new one, but neither seems to work.
/var/log/Xorg.0.log doesn't report any errors, it just gives different info from the configuration and the graphics card and just ends there.
I've tried booting with a debian live USB but it would't boot either (the computer would just restart). I've also tried a Kubuntu live USB, this time arround, it would start to boot but the graphics appeared to be corrupted (strange colored noise all over the screen) and eventually it would just hang up. Using nomodeset Kubuntu finally booted (using vesa I guess?), but the same didn't work in Arch (I'm guessing because I have the nvidia drivers installed instead of nouveau).
In conclussion, something appears to be wrong with the graphics card, I dont't know if it's a software problem or a hardware problem, as it started from one day to the other, without any upgrades in between, and it just doesn't work in any of the 3 distributions I've tested.
Any suggestions in what to do to troubleshoot this?
Thanks in advance,
Santiago.-Xorg.0.log
[ 35.560]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 35.560] X Protocol Version 11, Revision 0
[ 35.560] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 35.561] Current Operating System: Linux arch 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 35.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
[ 35.562] Build Date: 01 November 2013 05:10:48PM
[ 35.562]
[ 35.562] Current version of pixman: 0.30.2
[ 35.562] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.562] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 4 21:35:07 2013
[ 35.576] (==) Using config file: "/etc/X11/xorg.conf"
[ 35.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 35.577] (==) ServerLayout "Layout0"
[ 35.577] (**) |-->Screen "Screen0" (0)
[ 35.577] (**) | |-->Monitor "Monitor0"
[ 35.577] (**) | |-->Device "Device0"
[ 35.577] (**) |-->Input Device "Keyboard0"
[ 35.577] (**) |-->Input Device "Mouse0"
[ 35.577] (==) Automatically adding devices
[ 35.577] (==) Automatically enabling devices
[ 35.577] (==) Automatically adding GPU devices
[ 35.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 35.603] Entry deleted from font path.
[ 35.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 35.603] Entry deleted from font path.
[ 35.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 35.603] Entry deleted from font path.
[ 35.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 35.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 35.604] Entry deleted from font path.
[ 35.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 35.604] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 35.604] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.604] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 35.604] (WW) Disabling Keyboard0
[ 35.604] (WW) Disabling Mouse0
[ 35.604] (II) Loader magic: 0x7fdc20
[ 35.604] (II) Module ABI versions:
[ 35.604] X.Org ANSI C Emulation: 0.4
[ 35.604] X.Org Video Driver: 14.1
[ 35.604] X.Org XInput driver : 19.1
[ 35.604] X.Org Server Extension : 7.0
[ 35.604] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 35.605] (--) PCI:*(0:1:0:0) 10de:0421:1682:2353 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 35.606] Initializing built-in extension Generic Event Extension
[ 35.606] Initializing built-in extension SHAPE
[ 35.606] Initializing built-in extension MIT-SHM
[ 35.606] Initializing built-in extension XInputExtension
[ 35.606] Initializing built-in extension XTEST
[ 35.607] Initializing built-in extension BIG-REQUESTS
[ 35.607] Initializing built-in extension SYNC
[ 35.607] Initializing built-in extension XKEYBOARD
[ 35.607] Initializing built-in extension XC-MISC
[ 35.608] Initializing built-in extension SECURITY
[ 35.608] Initializing built-in extension XINERAMA
[ 35.608] Initializing built-in extension XFIXES
[ 35.608] Initializing built-in extension RENDER
[ 35.608] Initializing built-in extension RANDR
[ 35.609] Initializing built-in extension COMPOSITE
[ 35.609] Initializing built-in extension DAMAGE
[ 35.609] Initializing built-in extension MIT-SCREEN-SAVER
[ 35.609] Initializing built-in extension DOUBLE-BUFFER
[ 35.619] Initializing built-in extension RECORD
[ 35.629] Initializing built-in extension DPMS
[ 35.638] Initializing built-in extension X-Resource
[ 35.647] Initializing built-in extension XVideo
[ 35.656] Initializing built-in extension XVideo-MotionCompensation
[ 35.665] Initializing built-in extension XFree86-VidModeExtension
[ 35.673] Initializing built-in extension XFree86-DGA
[ 35.682] Initializing built-in extension XFree86-DRI
[ 35.690] Initializing built-in extension DRI2
[ 35.690] (II) LoadModule: "glx"
[ 35.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.111] (II) Module glx: vendor="NVIDIA Corporation"
[ 36.111] compiled for 4.0.2, module version = 1.0.0
[ 36.111] Module class: X.Org Server Extension
[ 36.111] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 36.126] Loading extension GLX
[ 36.126] (II) LoadModule: "nvidia"
[ 36.136] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 36.195] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 36.195] compiled for 4.0.2, module version = 1.0.0
[ 36.195] Module class: X.Org Video Driver
[ 36.197] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 36.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 36.197] (--) using VT number 2
[ 36.248] (II) Loading sub module "fb"
[ 36.248] (II) LoadModule: "fb"
[ 36.259] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.270] (II) Module fb: vendor="X.Org Foundation"
[ 36.270] compiled for 1.14.4, module version = 1.0.0
[ 36.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.270] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 36.270] (II) Loading sub module "wfb"
[ 36.270] (II) LoadModule: "wfb"
[ 36.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.271] (II) Module wfb: vendor="X.Org Foundation"
[ 36.271] compiled for 1.14.4, module version = 1.0.0
[ 36.271] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.271] (II) Loading sub module "shadow"
[ 36.271] (II) LoadModule: "shadow"
[ 36.271] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 36.272] (II) Module shadow: vendor="X.Org Foundation"
[ 36.272] compiled for 1.14.4, module version = 1.1.0
[ 36.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.272] (II) Loading sub module "ramdac"
[ 36.272] (II) LoadModule: "ramdac"
[ 36.272] (II) Module "ramdac" already built-in
[ 36.274] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 36.274] (==) NVIDIA(0): RGB weight 888
[ 36.274] (==) NVIDIA(0): Default visual is TrueColor
[ 36.274] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 36.274] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 36.274] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 36.274] (**) NVIDIA(0): Enabling 2D acceleration
[ 50.151] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 50.256] (II) NVIDIA(GPU-0): Display (Samsung SMB2330H (CRT-0)) does not support NVIDIA 3D
[ 50.256] (II) NVIDIA(GPU-0): Vision stereo.
[ 50.256] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
[ 50.256] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 50.256] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.85
[ 50.256] (II) NVIDIA(0): Detected PCI Express Link width: 16X
journalctl -xb
-- Logs begin at Sat 2013-08-17 21:55:41 ART, end at Mon 2013-11-04 22:01:35 ART. --
Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 364.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 368.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuset
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpu
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuacct
Nov 04 21:59:09 arch kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
Nov 04 21:59:09 arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
Nov 04 21:59:09 arch kernel: e820: BIOS-provided physical RAM map:
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007fbb4fff] usable
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbb5000-0x000000007fbf7fff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbf8000-0x000000007fd4bfff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd4c000-0x000000007fd51fff] ACPI data
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd52000-0x000000007fd52fff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd53000-0x000000007fd54fff] ACPI data
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd55000-0x000000007fd56fff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd57000-0x000000007fd57fff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd58000-0x000000007fd5bfff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd5c000-0x000000007fd6afff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd6b000-0x000000007fefffff] usable
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
Nov 04 21:59:09 arch kernel: NX (Execute Disable) protection: active
Nov 04 21:59:09 arch kernel: SMBIOS 2.4 present.
Nov 04 21:59:09 arch kernel: DMI: /DG31PR, BIOS PRG3110H.86A.0071.2010.0318.1704 03/18/2010
Nov 04 21:59:09 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Nov 04 21:59:09 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Nov 04 21:59:09 arch kernel: No AGP bridge found
Nov 04 21:59:09 arch kernel: e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
Nov 04 21:59:09 arch kernel: MTRR default type: uncachable
Nov 04 21:59:09 arch kernel: MTRR fixed ranges enabled:
Nov 04 21:59:09 arch kernel: 00000-9FFFF write-back
Nov 04 21:59:09 arch kernel: A0000-E7FFF uncachable
Nov 04 21:59:09 arch kernel: E8000-FFFFF write-protect
Nov 04 21:59:09 arch kernel: MTRR variable ranges enabled:
Nov 04 21:59:09 arch kernel: 0 base 000000000 mask F80000000 write-back
Nov 04 21:59:09 arch kernel: 1 base 07FF00000 mask FFFF00000 uncachable
Nov 04 21:59:09 arch kernel: 2 disabled
Nov 04 21:59:09 arch kernel: 3 disabled
Nov 04 21:59:09 arch kernel: 4 disabled
Nov 04 21:59:09 arch kernel: 5 disabled
Nov 04 21:59:09 arch kernel: 6 disabled
Nov 04 21:59:09 arch kernel: 7 disabled
Nov 04 21:59:09 arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 04 21:59:09 arch kernel: found SMP MP-table at [mem 0x000fc620-0x000fc62f] mapped at [ffff8800000fc620]
Nov 04 21:59:09 arch kernel: Scanning 1 areas for low memory corruption
Nov 04 21:59:09 arch kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 04 21:59:09 arch kernel: [mem 0x00000000-0x000fffff] page 4k
Nov 04 21:59:09 arch kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
Nov 04 21:59:09 arch kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
Nov 04 21:59:09 arch kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
Nov 04 21:59:09 arch kernel: [mem 0x7f800000-0x7f9fffff] page 2M
Nov 04 21:59:09 arch kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
Nov 04 21:59:09 arch kernel: [mem 0x7c000000-0x7f7fffff] page 2M
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Nov 04 21:59:09 arch kernel: [mem 0x00100000-0x001fffff] page 4k
Nov 04 21:59:09 arch kernel: [mem 0x00200000-0x7bffffff] page 2M
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbb4fff]
Nov 04 21:59:09 arch kernel: [mem 0x7fa00000-0x7fbb4fff] page 4k
Nov 04 21:59:09 arch kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fd6b000-0x7fefffff]
Nov 04 21:59:09 arch kernel: [mem 0x7fd6b000-0x7fefffff] page 4k
Nov 04 21:59:09 arch kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
Nov 04 21:59:09 arch kernel: RAMDISK: [mem 0x37a14000-0x37d01fff]
Nov 04 21:59:09 arch kernel: ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL)
Nov 04 21:59:09 arch kernel: ACPI: XSDT 000000007fd53f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
Nov 04 21:59:09 arch kernel: ACPI: FACP 000000007fd51d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
Nov 04 21:59:09 arch kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
Nov 04 21:59:09 arch kernel: ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7FD56F40/0x000000007FD52F40, using 32 (20130517/tbfadt-522)
Nov 04 21:59:09 arch kernel: ACPI: DSDT 000000007fd4c010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117)
Nov 04 21:59:09 arch kernel: ACPI: FACS 000000007fd56f40 00040
Nov 04 21:59:09 arch kernel: ACPI: APIC 000000007fd51f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
Nov 04 21:59:09 arch kernel: ACPI: HPET 000000007fd5ad10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
Nov 04 21:59:09 arch kernel: ACPI: MCFG 000000007fd5ac10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
Nov 04 21:59:09 arch kernel: No NUMA configuration found
Nov 04 21:59:09 arch kernel: Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
Nov 04 21:59:09 arch kernel: Initmem setup node 0 [mem 0x00000000-0x7fefffff]
Nov 04 21:59:09 arch kernel: NODE_DATA [mem 0x7fefb000-0x7fefffff]
Nov 04 21:59:09 arch kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
Nov 04 21:59:09 arch kernel: Zone ranges:
Nov 04 21:59:09 arch kernel: DMA [mem 0x00001000-0x00ffffff]
Nov 04 21:59:09 arch kernel: DMA32 [mem 0x01000000-0xffffffff]
Nov 04 21:59:09 arch kernel: Normal empty
Nov 04 21:59:09 arch kernel: Movable zone start for each node
Nov 04 21:59:09 arch kernel: Early memory node ranges
Nov 04 21:59:09 arch kernel: node 0: [mem 0x00001000-0x0009efff]
Nov 04 21:59:09 arch kernel: node 0: [mem 0x00100000-0x7fbb4fff]
Nov 04 21:59:09 arch kernel: node 0: [mem 0x7fd6b000-0x7fefffff]
Nov 04 21:59:09 arch kernel: On node 0 totalpages: 523496
Nov 04 21:59:09 arch kernel: DMA zone: 64 pages used for memmap
Nov 04 21:59:09 arch kernel: DMA zone: 21 pages reserved
Nov 04 21:59:09 arch kernel: DMA zone: 3998 pages, LIFO batch:0
Nov 04 21:59:09 arch kernel: DMA32 zone: 8124 pages used for memmap
Nov 04 21:59:09 arch kernel: DMA32 zone: 519498 pages, LIFO batch:31
Nov 04 21:59:09 arch kernel: ACPI: PM-Timer IO Port: 0x408
Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Nov 04 21:59:09 arch kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Nov 04 21:59:09 arch kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 04 21:59:09 arch kernel: ACPI: IRQ0 used by override.
Nov 04 21:59:09 arch kernel: ACPI: IRQ2 used by override.
Nov 04 21:59:09 arch kernel: ACPI: IRQ9 used by override.
Nov 04 21:59:09 arch kernel: Using ACPI (MADT) for SMP configuration information
Nov 04 21:59:09 arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Nov 04 21:59:09 arch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Nov 04 21:59:09 arch kernel: nr_irqs_gsi: 40
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbb5000-0x7fbf7fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbf8000-0x7fd4bfff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd4c000-0x7fd51fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd52000-0x7fd52fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd53000-0x7fd54fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd55000-0x7fd56fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd57000-0x7fd57fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd58000-0x7fd5bfff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd5c000-0x7fd6afff]
Nov 04 21:59:09 arch kernel: e820: [mem 0x7ff00000-0xfed1bfff] available for PCI devices
Nov 04 21:59:09 arch kernel: Booting paravirtualized kernel on bare hardware
Nov 04 21:59:09 arch kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
Nov 04 21:59:09 arch kernel: PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86528 r8192 d24064 u524288
Nov 04 21:59:09 arch kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
Nov 04 21:59:09 arch kernel: pcpu-alloc: [0] 0 1 2 3
Nov 04 21:59:09 arch kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515287
Nov 04 21:59:09 arch kernel: Policy zone: DMA32
Nov 04 21:59:09 arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
Nov 04 21:59:09 arch kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 04 21:59:09 arch kernel: Checking aperture...
Nov 04 21:59:09 arch kernel: No AGP bridge found
Nov 04 21:59:09 arch kernel: Calgary: detecting Calgary via BIOS EBDA area
Nov 04 21:59:09 arch kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Nov 04 21:59:09 arch kernel: Memory: 2045916K/2093984K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 48068K reserved)
Nov 04 21:59:09 arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Nov 04 21:59:09 arch kernel: Preemptible hierarchical RCU implementation.
Nov 04 21:59:09 arch kernel: RCU dyntick-idle grace-period acceleration is enabled.
Nov 04 21:59:09 arch kernel: Dump stacks of tasks blocking RCU-preempt GP.
Nov 04 21:59:09 arch kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Nov 04 21:59:09 arch kernel: NR_IRQS:8448 nr_irqs:712 16
Nov 04 21:59:09 arch kernel: Console: colour dummy device 80x25
Nov 04 21:59:09 arch kernel: console [tty0] enabled
Nov 04 21:59:09 arch kernel: allocated 8388608 bytes of page_cgroup
Nov 04 21:59:09 arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 04 21:59:09 arch kernel: hpet clockevent registered
Nov 04 21:59:09 arch kernel: tsc: Fast TSC calibration using PIT
Nov 04 21:59:09 arch kernel: tsc: Detected 2399.803 MHz processor
Nov 04 21:59:09 arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.58 BogoMIPS (lpj=7999343)
Nov 04 21:59:09 arch kernel: pid_max: default: 32768 minimum: 301
Nov 04 21:59:09 arch kernel: Security Framework initialized
Nov 04 21:59:09 arch kernel: AppArmor: AppArmor disabled by boot time parameter
Nov 04 21:59:09 arch kernel: Yama: becoming mindful.
Nov 04 21:59:09 arch kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 04 21:59:09 arch kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 04 21:59:09 arch kernel: Mount-cache hash table entries: 256
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys memory
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys devices
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys freezer
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys net_cls
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys blkio
Nov 04 21:59:09 arch kernel: CPU: Physical Processor ID: 0
Nov 04 21:59:09 arch kernel: CPU: Processor Core ID: 0
Nov 04 21:59:09 arch kernel: mce: CPU supports 6 MCE banks
Nov 04 21:59:09 arch kernel: CPU0: Thermal monitoring enabled (TM2)
Nov 04 21:59:09 arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Nov 04 21:59:09 arch kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
Nov 04 21:59:09 arch kernel: ACPI: Core revision 20130517
Nov 04 21:59:09 arch kernel: ACPI: All ACPI Tables successfully acquired
Nov 04 21:59:09 arch kernel: ftrace: allocating 20100 entries in 79 pages
Nov 04 21:59:09 arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 04 21:59:09 arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
Nov 04 21:59:09 arch kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
Nov 04 21:59:09 arch kernel: perf_event_intel: PEBS disabled due to CPU errata
Nov 04 21:59:09 arch kernel: ... version: 2
Nov 04 21:59:09 arch kernel: ... bit width: 40
Nov 04 21:59:09 arch kernel: ... generic registers: 2
Nov 04 21:59:09 arch kernel: ... value mask: 000000ffffffffff
Nov 04 21:59:09 arch kernel: ... max period: 000000007fffffff
Nov 04 21:59:09 arch kernel: ... fixed-purpose events: 3
Nov 04 21:59:09 arch kernel: ... event mask: 0000000700000003
Nov 04 21:59:09 arch kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 04 21:59:09 arch kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
Nov 04 21:59:09 arch kernel: Brought up 4 CPUs
Nov 04 21:59:09 arch kernel: smpboot: Total of 4 processors activated (19206.35 BogoMIPS)
Nov 04 21:59:09 arch kernel: devtmpfs: initialized
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fbb5000-0x7fbf7fff] (274432 bytes)
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd52000-0x7fd52fff] (4096 bytes)
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd55000-0x7fd56fff] (8192 bytes)
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd58000-0x7fd5bfff] (16384 bytes)
Nov 04 21:59:09 arch kernel: RTC time: 0:59:05, date: 11/05/13
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 16
Nov 04 21:59:09 arch kernel: ACPI: bus type PCI registered
Nov 04 21:59:09 arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
Nov 04 21:59:09 arch kernel: PCI: not using MMCONFIG
Nov 04 21:59:09 arch kernel: PCI: Using configuration type 1 for base access
Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Nov 04 21:59:09 arch kernel: mtrr: probably your BIOS does not setup all CPUs.
Nov 04 21:59:09 arch kernel: mtrr: corrected configuration.
Nov 04 21:59:09 arch kernel: bio: create slab <bio-0> at 0
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Module Device)
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Device)
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 04 21:59:09 arch kernel: ACPI: EC: Look up EC in DSDT
Nov 04 21:59:09 arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
Nov 04 21:59:09 arch kernel: ACPI: SSDT 000000007fd56c10 002CC (v01 AMI IST 00000001 MSFT 03000001)
Nov 04 21:59:09 arch kernel: ACPI: Dynamic OEM Table Load:
Nov 04 21:59:09 arch kernel: ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
Nov 04 21:59:09 arch kernel: ACPI: Interpreter enabled
Nov 04 21:59:09 arch kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Nov 04 21:59:09 arch kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 04 21:59:09 arch kernel: ACPI: Using IOAPIC for interrupt routing
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
Nov 04 21:59:09 arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov 04 21:59:09 arch kernel: ACPI: No dock devices found.
Nov 04 21:59:09 arch kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Nov 04 21:59:09 arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
Nov 04 21:59:09 arch kernel: PCI host bridge to bus 0000:00
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x10: [io 0xf130-0xf137]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x14: [io 0xf120-0xf123]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x18: [io 0xf110-0xf117]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x1c: [io 0xf100-0xf103]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x18: [mem 0xfb120000-0xfb120fff 64bit]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: supports D1 D2
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
Nov 04 21:59:09 arch kernel: ACPI: \_SB_.PCI0: notify handler is installed
Nov 04 21:59:09 arch kernel: Found 1 acpi root devices
Nov 04 21:59:09 arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov 04 21:59:09 arch kernel: vgaarb: loaded
Nov 04 21:59:09 arch kernel: vgaarb: bridge control possible 0000:01:00.0
Nov 04 21:59:09 arch kernel: PCI: Using ACPI for IRQ routing
Nov 04 21:59:09 arch kernel: PCI: pci_cache_line_size set to 64 bytes
Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7fbb5000-0x7fffffff]
Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
Nov 04 21:59:09 arch kernel: NetLabel: Initializing
Nov 04 21:59:09 arch kernel: NetLabel: domain hash size = 128
Nov 04 21:59:09 arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 04 21:59:09 arch kernel: NetLabel: unlabeled traffic allowed by default
Nov 04 21:59:09 arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Nov 04 21:59:09 arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Nov 04 21:59:09 arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Nov 04 21:59:09 arch kernel: Switched to clocksource hpet
Nov 04 21:59:09 arch kernel: pnp: PnP ACPI init
Nov 04 21:59:09 arch kernel: ACPI: bus type PNP registered
Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0400-0x047f] could not be reserved
Nov 04 21:59:09 arch kernel: system 00:01: [io 0x1180-0x119f] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0500-0x053f] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffb00000-0xffcfffff] could not be reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfc800000-0xfc800fff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed20000-0xfed7ffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 04 21:59:09 arch kernel: system 00:02: [io 0x0290-0x029f] has been reserved
Nov 04 21:59:09 arch kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 04 21:59:09 arch kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Nov 04 21:59:09 arch kernel: pnp 00:04: [dma 2]
Nov 04 21:59:09 arch kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
Nov 04 21:59:09 arch kernel: pnp 00:05: [dma 0 disabled]
Nov 04 21:59:09 arch kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
Nov 04 21:59:09 arch kernel: pnp 00:06: [dma 4]
Nov 04 21:59:09 arch kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
Nov 04 21:59:09 arch kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
Nov 04 21:59:09 arch kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
Nov 04 21:59:09 arch kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved
Nov 04 21:59:09 arch kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 04 21:59:09 arch kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
Nov 04 21:59:09 arch kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
Nov 04 21:59:09 arch kernel: pnp: PnP ACPI: found 12 devices
Nov 04 21:59:09 arch kernel: ACPI: bus type PNP unregistered
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: setting latency timer to 64
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 7 [mem 0x80000000-0xffffffff]
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 2
Nov 04 21:59:09 arch kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
Nov 04 21:59:09 arch kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
Nov 04 21:59:09 arch kernel: TCP: Hash tables configured (established 16384 bind 16384)
Nov 04 21:59:09 arch kernel: TCP: reno registered
Nov 04 21:59:09 arch kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
Nov 04 21:59:09 arch kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 1
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Boot video device
Nov 04 21:59:09 arch kernel: PCI: CLS 64 bytes, default 64
Nov 04 21:59:09 arch kernel: Unpacking initramfs...
Nov 04 21:59:09 arch kernel: Freeing initrd memory: 3000K (ffff880037a14000 - ffff880037d02000)
Nov 04 21:59:09 arch kernel: Scanning for low memory corruption every 60 seconds
Nov 04 21:59:09 arch kernel: audit: initializing netlink socket (disabled)
Nov 04 21:59:09 arch kernel: type=2000 audit(1383613146.559:1): initialized
Nov 04 21:59:09 arch kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 04 21:59:09 arch kernel: zbud: loaded
Nov 04 21:59:09 arch kernel: VFS: Disk quotas dquot_6.5.2
Nov 04 21:59:09 arch kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 04 21:59:09 arch kernel: msgmni has been set to 4001
Nov 04 21:59:09 arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 04 21:59:09 arch kernel: io scheduler noop registered
Nov 04 21:59:09 arch kernel: io scheduler deadline registered
Nov 04 21:59:09 arch kernel: io scheduler cfq registered (default)
Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
Nov 04 21:59:09 arch kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
Nov 04 21:59:09 arch kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 04 21:59:09 arch kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
Nov 04 21:59:09 arch kernel: vesafb: scrolling: redraw
Nov 04 21:59:09 arch kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Nov 04 21:59:09 arch kernel: vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90002400000, using 1216k, total 1216k
Nov 04 21:59:09 arch kernel: Console: switching to colour frame buffer device 80x30
Nov 04 21:59:09 arch kernel: fb0: VESA VGA frame buffer device
Nov 04 21:59:09 arch kernel: intel_idle: does not run on family 6 model 15
Nov 04 21:59:09 arch kernel: GHES: HEST is not enabled!
Nov 04 21:59:09 arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 04 21:59:09 arch kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 04 21:59:09 arch kernel: Linux agpgart interface v0.103
Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
Nov 04 21:59:09 arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 04 21:59:09 arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 04 21:59:09 arch kernel: mousedev: PS/2 mouse device common for all mice
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: RTC can wake from S4
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Nov 04 21:59:09 arch kernel: cpuidle: using governor ladder
Nov 04 21:59:09 arch kernel: cpuidle: using governor menu
Nov 04 21:59:09 arch kernel: drop_monitor: Initializing network drop monitor service
Nov 04 21:59:09 arch kernel: TCP: cubic registered
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 10
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 17
Nov 04 21:59:09 arch kernel: Key type dns_resolver registered
Nov 04 21:59:09 arch kernel: PM: Hibernation image not present or could not be loaded.
Nov 04 21:59:09 arch kernel: registered taskstats version 1
Nov 04 21:59:09 arch kernel: Magic number: 5:843:960
Nov 04 21:59:09 arch kernel: memory memory11: hash matches
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: setting system clock to 2013-11-05 00:59:07 UTC (1383613147)
Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
Nov 04 21:59:09 arch kernel: Write protecting the kernel read-only data: 8192k
Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
Nov 04 21:59:09 arch systemd-udevd[58]: starting version 208
Nov 04 21:59:09 arch kernel: Floppy drive(s): fd0 is 1.44M
Nov 04 21:59:09 arch kernel: SCSI subsystem initialized
Nov 04 21:59:09 arch kernel: ACPI: bus type USB registered
Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver usbfs
Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver hub
Nov 04 21:59:09 arch kernel: usbcore: registered new device driver usb
Nov 04 21:59:09 arch kernel: ACPI: bus type ATA registered
Nov 04 21:59:09 arch kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 04 21:59:09 arch kernel: uhci_hcd: USB Universal Host Controller Interface driver
Nov 04 21:59:09 arch kernel: libata version 3.00 loaded.
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
Nov 04 21:59:09 arch kernel: ehci-pci: EHCI PCI platform driver
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
Nov 04 21:59:09 arch kernel: FDC 0 is a post-1991 82077
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: version 2.13
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
Nov 04 21:59:09 arch kernel: scsi0 : ata_piix
Nov 04 21:59:09 arch kernel: scsi1 : ata_piix
Nov 04 21:59:09 arch kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
Nov 04 21:59:09 arch kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: MAP [
Nov 04 21:59:09 arch kernel: P0 P2 P1 P3 ]
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Nov 04 21:59:09 arch kernel: ata2: port disabled--ignoring
Nov 04 21:59:09 arch kernel: scsi2 : ata_piix
Nov 04 21:59:09 arch kernel: scsi3 : ata_piix
Nov 04 21:59:09 arch kernel: ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
Nov 04 21:59:09 arch kernel: ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: debug port 1
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Nov 04 21:59:09 arch kernel: hub 5-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 5-0:1.0: 8 ports detected
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: ata4.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
Nov 04 21:59:09 arch kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 04 21:59:09 arch kernel: ata4.00: configured for UDMA/133
Nov 04 21:59:09 arch kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write Protect is off
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 04 21:59:09 arch kernel: sda: sda1 sda2 sda3 sda4 sda5
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Attached SCSI disk
Nov 04 21:59:09 arch kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
Nov 04 21:59:09 arch kernel: tsc: Refined TSC clocksource calibration: 2399.950 MHz
Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Nov 04 21:59:09 arch systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Nov 04 21:59:09 arch systemd[1]: Set hostname to <arch>.
Nov 04 21:59:09 arch kernel: Switched to clocksource tsc
Nov 04 21:59:09 arch systemd[1]: Failed to load default target: No such file or directory
Nov 04 21:59:09 arch systemd[1]: Trying to load rescue target...
Nov 04 21:59:09 arch systemd[1]: Starting Encrypted Volumes.
Nov 04 21:59:09 arch systemd[1]: Reached target Encrypted Volumes.
Nov 04 21:59:09 arch systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Nov 04 21:59:09 arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 04 21:59:09 arch systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Nov 04 21:59:09 arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Nov 04 21:59:09 arch systemd[1]: Starting Journal Socket.
Nov 04 21:59:09 arch systemd[1]: Listening on Journal Socket.
Nov 04 21:59:09 arch systemd[1]: Starting Setup Virtual Console...
Nov 04 21:59:09 arch systemd[1]: Starting Apply Kernel Variables...
Nov 04 21:59:09 arch systemd[1]: Started Set Up Additional Binary Formats.
Nov 04 21:59:09 arch systemd[1]: Started Load Kernel Modules.
Nov 04 21:59:09 arch systemd[1]: Mounted FUSE Control File System.
Nov 04 21:59:09 arch systemd[1]: Mounting POSIX Message Queue File System...
Nov 04 21:59:09 arch systemd[1]: Mounting Huge Pages File System...
Nov 04 21:59:09 arch systemd[1]: Mounting Configuration File System...
Nov 04 21:59:09 arch systemd[1]: Starting Journal Service...
Nov 04 21:59:09 arch systemd[1]: Started Journal Service.
Nov 04 21:59:09 arch systemd-journal[120]: Journal started
-- Subject: The Journal has been started
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- The system journal process has been starting up, opened the journal
-- files for writing and is now ready to process requests.
Nov 04 21:59:09 arch systemd[1]: Starting Create list of required static device nodes for the current kernel...
-- Subject: Unit kmod-static-nodes.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit kmod-static-nodes.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Starting udev Kernel Socket.
-- Subject: Unit systemd-udevd-kernel.socket has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-kernel.socket has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Listening on udev Kernel Socket.
-- Subject: Unit systemd-udevd-kernel.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-kernel.socket has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting udev Control Socket.
-- Subject: Unit systemd-udevd-control.socket has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-control.socket has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Listening on udev Control Socket.
-- Subject: Unit systemd-udevd-control.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-control.socket has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting udev Coldplug all Devices...
-- Subject: Unit systemd-udev-trigger.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udev-trigger.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Mounting Debug File System...
-- Subject: Unit sys-kernel-debug.mount has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sys-kernel-debug.mount has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Expecting device dev-sda4.device...
-- Subject: Unit dev-sda4.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-sda4.device has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device...
-- Subject: Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Mounting Temporary Directory...
-- Subject: Unit tmp.mount has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit tmp.mount has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Started File System Check on Root Device.
-- Subject: Unit systemd-fsck-root.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-fsck-root.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting Remount Root and Kernel File Systems...
-- Subject: Unit systemd-remount-fs.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-remount-fs.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Starting Root Slice.
-- Subject: Unit -.slice has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit -.slice has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Created slice Root Slice.
-- Subject: Unit -.slice has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit -.slice has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting System Slice.
-- Subject: Unit system.slice has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system.slice has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Created slice System Slice.
-- Subject: Unit system.slice has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system.slice has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device...
-- Subject: Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Started Apply Kernel Variables.
-- Subject: Unit systemd-sysctl.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-sysctl.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted POSIX Message Queue File System.
-- Subject: Unit dev-mqueue.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-mqueue.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Huge Pages File System.
-- Subject: Unit dev-hugepages.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-hugepages.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Configuration File System.
-- Subject: Unit sys-kernel-config.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sys-kernel-config.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Debug File System.
-- Subject: Unit sys-kernel-debug.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sys-kernel-debug.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Temporary Directory.
-- Subject: Unit tmp.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit tmp.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Started Create list of required static device nodes for the current kernel.
-- Subject: Unit kmod-static-nodes.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit kmod-static-nodes.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Started udev Coldplug all Devices.
-- Subject: Unit systemd-udev-trigger.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udev-trigger.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting Create static device nodes in /dev...
-- Subject: Unit systemd-tmpfiles-setup-dev.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Started Remount Root and Kernel File Systems.
-- Subject: Unit systemd-remount-fs.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-remount-fs.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting Load/Save Random Seed...
-- Subject: Unit systemd-random-seed.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-random-seed.service has begun starting up.
Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Nov 04 21:59:09 arch systemd[1]: Started Load/Save Random Seed.
-- Subject: Unit systemd-random-seed.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-random-seed.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Started Create static device nodes in /dev.
-- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mail -
System hangs with radeon card and vgaswitcheroo
I have an HP Envy 17-3200 with an integrated HD4000 (i915) and an ATI M7850 (radeon). These modules are both included in the kernel via mkinitcpio. I am using systemd but have enabled the rc-local service to run at boot (rc.local is run). This turns off the discrete card via vgaswitcheroo. Given this configuration, the system boots normally into gdm. However, when I attempt to switch graphics cards via:
$ echo DDIS > /sys/kernel/debug/vgaswitcheroo/switch
$ sudo systemctl restart gdm.service
The system hangs (I have to force a reset). This happens regardless of whether I echo OFF into vgaswitcheroo. This does not happen if I restart gdm without switching cards.
I know the radeon driver is loaded and associated with my card as:
$ lspci -k
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Subsystem: Hewlett-Packard Company Device 1853
Kernel driver in use: i915
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 6827 (rev ff)
Kernel driver in use: radeon
I'm not even sure of what log to look in to narrow down the problem.
NOTE: This seems to be related to this post. That problem was at boot time and mine was not, though. In addition, no one replied to that post, so I thought I might make a new one.https://bugs.freedesktop.org/show_bug.cgi?id=37528
I am not 100% sure, but I think that is the answer to your question. Not very satisfying, but I have the same problem. It's impossible to get it working.
Maybe Wayland will solve the issue, someday... when we've already bought new laptops... which by that time won't be supported by Wayland. ;-)
Maybe you are looking for
-
Table for price produced in the invoice-SD module
hi friends is there any table(not structure) from which i can find the value for total Basic price(without any tax of frieght etc) of an item in the invoice.like if the per unit value is 100/- nd qty is 10/- then total =1000/- i want this basic tota
-
Appending internal table which is referenced by field-symbol
Hi, I have a selection screen field called SP$00005 which is not known until runtime as the field is selected in Adhoc Query (SAP Query) by the user. In the customer exit I am attempting to write code to default in a range to this field - it is a dat
-
I am trying to download Adobe Reader but it won't take my password.
I have tried repeatedly to download Adobe Reader but after getting the installation program, my password is rejected. I type in the password (accurately, as I've changed it 3x), and it just shakes in place. Has anyone else had this problem?
-
Program sending queries to a RFC Queue
Hi experts! I have a program that is sending queries to outbound RFC queue ( T/ smq1). How can i know the name of this program and how can i stop the queries? Thanks to all.
-
ALV Grid with size of the whole screen
I need to create ALV Grid, that fits any screen. How can i do this? I tried cl_gui_docing_container, but in the constructor it's possible to make it to occupy only 95% of the screen.