Systems are not visiable in monitoring graphic
Hi friends,
I am not able to view systems under monitoring graphic. the screen is showing blank.
One of our PC is showing systems and self diagnostic screen, i made my system same as that system(GUI, IE, host entries, JRE) but still i am not able to view the contents on screen.
Please help.
Regards,
Mandar
Hello Mandar,
You will need to check your external alias. Could you kindly check this according to the patch in transaction SPRO > IMG
> SAP Solution Manager Implementation Guide > SAP Solution Manager > Basic Settings > SAP Solution Manager System > HTTP Services
Kindly go through all the Sub-Notes' Documentation in "HTTP Services".
Also, please note that if systems do show up in the Solution Manager for operations depends on the selected "Leading Role of the Solution" for the solution landscape and if there is a logical system defined in the corresponding field of the logical component which is added to this solution landscape.
This logical component structure is mainly designed for the Solution Manager implementation functionality in which projects phases moves from development to quality assurance to training and to production. I always advise the customer to create solution landscapes with 'Production' as a Leading Role and in the logical components structures only add the logical systems to the 'Production' field.
Hope this helps you out.
Thanks,
Mark
Similar Messages
-
File Systems are not shown in CCMS Monitoring
Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
PjHi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu -
In rz20 all file systems are not coming.
Hi all.
I have ccms configuration in local system not in central system menas every system there are own ccms configuration.
File system In rz20 that all file systems are not coming.
in os level there are like sapdata1,sapdata2.... & sapreorg but these file system are not coming in rz20.so we are not getting any alert regarding this file systems.
Kindly suggest how can i fetch all the file system which are available in os level.
thanks in advance.
Thanks & regards,
LaxmidHi Kumar,
Os -HP Unix
In *RZ0> SAP CCMS Monitor Templates>Filesystems--->* these below file systems are not coming.Otheres are coming.
/oracle/RXN/sapdata1
/oracle/RXN/sapdata2
/oracle/RXN/sapdata3
/oracle/RXN/sapdata4
/oracle/RXN/oraarch
/oracle/RXN/sapreorg
& please tell me there is one Lock & unlock is there in front of every node.what is this.
Thanks & Regards
Laxmi
Edited by: laxmid on Feb 7, 2010 9:04 PM -
Changes in development system are not excluded
Anyone had this issue in CHARM before ?
we have SLFN - SDCR - SDMJ open for a change.
Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
Business now wants to stop this change and close SLFN.
How can I close/cancel SDMJ ?
When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
Is there a way to force close SDMJ ?
Thank you
Elena>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape. -
Shared Services Users are not Visiable in Planning Application
Hi All,
We are using Hyperion 11.1.3 version
Problem: We Created Users in Shared Services but those users are not visible in Planning
can you suggest me
VijayHi John,
After giving all the Planning provisions to users, they are not visiable while assigining access to Dimensions Members,
I selected Account Dimension Lower member and clicked on Assing Access button on the top, it opened a popup window where I could not see any users in it....
can you suggest me what should I do???
Vijay -
Sys Monitoring:Only PRD System can be seen in Monitoring Graphic
Hi All,
I configured Solution -> Assigned Logical Component to it -> which contains all the 3 systems of our landscape.
But in Monitoring Graphic I see only PRD. Why?
RFCs are working fine.Hi,
per default, only the systems of the "leading system role" are activated for monitoring. Via the "System Group" tab on the root node of the solution, it is possible to activate additional systems. Select the system in the table and press button "Insert <-> Remove Product System".
Best regards,
Michael -
WSUS SP2 Client Systems are not detecting Updates,
I have a WSUS SP2 (with WSUS-KB2720211-x64) running on Windows 2008 R2. The WSUS site is running on custom site port 8530.
All the clients are reporting without any issues. However the approved patches are not getting detected on the clients.
From the client I can get cab file by accessing http://WSUSServerName:8530/iuident.cab
Network connectivity OR firewall issue is ruled out. Also the client system are updating the update agent to
7.6 from WSUS. I am sure the approved patches are needed on the client PC's, the WSUS report for a particular approved patch too says that the approved patch is needed.
Please find the following WIndowsUpdate log from the client PC and please advise.
2015-02-15 14:17:21:387
804 ec4
Misc =========== Logging initialized (build: 7.6.7600.256, tz: +0300) ===========
2015-02-15 14:17:21:387
804 ec4
Misc = Process: C:\Windows\system32\svchost.exe
2015-02-15 14:17:21:387
804 ec4
Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-15 14:17:21:387
804 ec4
Service *************
2015-02-15 14:17:21:387
804 ec4
Service ** START ** Service: Service startup
2015-02-15 14:17:21:387
804 ec4
Service *********
2015-02-15 14:17:21:402
804 ec4
Agent * WU client version 7.6.7600.256
2015-02-15 14:17:21:402
804 ec4
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-15 14:17:21:402
804 ec4
Agent * Access type: No proxy
2015-02-15 14:17:21:402
804 ec4
Agent * Network state: Connected
2015-02-15 14:17:28:313
804 3f4
Report CWERReporter::Init succeeded
2015-02-15 14:17:28:313
804 3f4
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-15 14:17:28:313
804 3f4
Agent *********** Agent: Initializing global settings cache ***********
2015-02-15 14:17:28:313
804 3f4
Agent * WSUS server: http://192.168.1.1:8530
2015-02-15 14:17:28:313
804 3f4
Agent * WSUS status server: http://192.168.1.1:8530
2015-02-15 14:17:28:313
804 3f4
Agent * Target group: (Unassigned Computers)
2015-02-15 14:17:28:313
804 3f4
Agent * Windows Update access disabled: No
2015-02-15 14:17:28:313
804 3f4
DnldMgr Download manager restoring 0 downloads
2015-02-15 14:17:28:313
804 3f4
AU ########### AU: Initializing Automatic Updates ###########
2015-02-15 14:17:28:329
804 3f4
AU # WSUS server: http://192.168.1.1:8530
2015-02-15 14:17:28:329
804 3f4
AU # Detection frequency: 22
2015-02-15 14:17:28:329
804 3f4
AU # Approval type: Pre-install notify (Policy)
2015-02-15 14:17:28:329
804 3f4
AU # Auto-install minor updates: No (User preference)
2015-02-15 14:17:28:329
804 3f4
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-15 14:17:28:360
804 ec4
Report *********** Report: Initializing static reporting data ***********
2015-02-15 14:17:28:360
804 ec4
Report * OS Version = 6.1.7601.1.0.196880
2015-02-15 14:17:28:360
804 ec4
Report * OS Product Type = 0x00000007
2015-02-15 14:17:28:360
804 ec4
Report * Computer Brand = VMware, Inc.
2015-02-15 14:17:28:360
804 ec4
Report * Computer Model = VMware Virtual Platform
2015-02-15 14:17:28:360
804 ec4
Report * Bios Revision = 6.00
2015-02-15 14:17:28:360
804 ec4
Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2015-02-15 14:17:28:360
804 ec4
Report * Bios Release Date = 2013-07-30T00:00:00
2015-02-15 14:17:28:360
804 ec4
Report * Locale ID = 1033
2015-02-15 14:17:28:360
804 3f4
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:28:360
804 3f4
AU Initializing featured updates
2015-02-15 14:17:28:360
804 3f4
AU Found 0 cached featured updates
2015-02-15 14:17:28:360
804 3f4
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:28:360
804 3f4
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:28:360
804 3f4
AU AU finished delayed initialization
2015-02-15 14:17:28:360
804 3f4
AU Triggering AU detection through DetectNow API
2015-02-15 14:17:28:360
804 3f4
AU Triggering Online detection (non-interactive)
2015-02-15 14:17:28:360
804 ec4
AU #############
2015-02-15 14:17:28:360
804 ec4
AU ## START ## AU: Search for updates
2015-02-15 14:17:28:360
804 ec4
AU #########
2015-02-15 14:17:28:360
804 ec4
AU <<## SUBMITTED ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
2015-02-15 14:17:28:360
804 56c
Agent *************
2015-02-15 14:17:28:360
804 56c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-15 14:17:28:360
804 56c
Agent *********
2015-02-15 14:17:28:360
804 56c
Agent * Online = Yes; Ignore download priority = No
2015-02-15 14:17:28:360
804 56c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-02-15 14:17:28:360
804 56c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-02-15 14:17:28:360
804 56c
Agent * Search Scope = {Machine}
2015-02-15 14:17:28:360
804 56c
Setup Checking for agent SelfUpdate
2015-02-15 14:17:28:360
804 56c
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2015-02-15 14:17:28:360
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2015-02-15 14:17:28:375
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:981
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2015-02-15 14:17:30:981
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:981
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2015-02-15 14:17:30:981
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:981
804 56c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2015-02-15 14:17:30:981
804 56c
Misc Microsoft signed: Yes
2015-02-15 14:17:30:996
804 56c
Setup Determining whether a new setup handler needs to be downloaded
2015-02-15 14:17:30:996
804 56c
Setup SelfUpdate handler is not found. It will be downloaded
2015-02-15 14:17:30:996
804 56c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2015-02-15 14:17:30:996
804 56c
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2015-02-15 14:17:30:996
804 56c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2015-02-15 14:17:31:012
804 56c
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2015-02-15 14:17:31:012
804 56c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2015-02-15 14:17:31:012
804 56c
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2015-02-15 14:17:31:012
804 56c
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-02-15 14:17:31:449
804 56c
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-02-15 14:17:31:449
804 56c
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://192.168.1.1:8530/ClientWebService/client.asmx
2015-02-15 14:17:36:721
804 56c
Agent * Found 0 updates and 76 categories in search; evaluated appl. rules of 724 out of 1278 deployed entities
2015-02-15 14:17:36:721
804 56c
Agent *********
2015-02-15 14:17:36:721
804 56c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-02-15 14:17:36:721
804 56c
Agent *************
2015-02-15 14:17:36:737
804 c4c
AU >>## RESUMED ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
2015-02-15 14:17:36:737
804 c4c
AU # 0 updates detected
2015-02-15 14:17:36:737
804 c4c
AU #########
2015-02-15 14:17:36:737
804 c4c
AU ## END ## AU: Search for updates [CallId = {0512C3B0-1E35-4BDD-9B28-02E064DF3EFB}]
2015-02-15 14:17:36:737
804 c4c
AU #############
2015-02-15 14:17:36:737
804 c4c
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:36:737
804 c4c
AU Featured notifications is disabled.
2015-02-15 14:17:36:737
804 c4c
AU AU setting next detection timeout to 2015-02-16 07:41:21
2015-02-15 14:17:36:737
804 c4c
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:36:737
804 c4c
AU Successfully wrote event for AU health state:0
2015-02-15 14:17:36:784
804 56c
Report CWERReporter finishing event handling. (00000000)
2015-02-15 14:17:41:729
804 56c
Report REPORT EVENT: {6EBDD70F-EF5E-4673-9283-1A94A5FC5A0C}
2015-02-15 14:17:36:721+0300 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2015-02-15 14:17:41:729
804 56c
Report REPORT EVENT: {621A5AA7-E564-44F1-B16B-5E928ECE4BC0}
2015-02-15 14:17:36:721+0300 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2015-02-15 14:17:41:729
804 56c
Report CWERReporter finishing event handling. (00000000)KB2720211 has been superceded by KB 2828185, I'd recommend installing that first, it resolves a lot of issues with the first update.
http://blogs.technet.com/b/wsus/archive/2013/04/16/update-solution-for-wsus-export-bug-is-now-available-for-wsus-3-x-sp2.aspx
https://support.microsoft.com/kb/2828185
It would be worth checking if those updates you think should be installed haven't already been superceded by others. It's possible newer updates have been installed, so the superceded updates could actually be declined. -
Good Morning:
Having an issue with my Hp Pavilion Elite HPE-541F and Monitor HP2311x
Yesterday, thinking I was updating Java ... clicked on it and agreed to things being allowed on computer ... started adding icons to my desktop .... then pop ups kept coming up to register etc ... I assumed that something was wrong so I attempted to restore system to previous ... since then my system will not boot up ... will say "starting windows" and I can hear the fans working but thats it ... second part of the issue is that the monitor keeps going to sleep, so even if I try to restart the computer in "safe" mode or anything else monitor goes to sleep and there's nothing on the screen so don't know if anything is doing anything .... Very sorry I'm also not very tech savy with computers ... just trying to save time and money before I have to bring system to computer repair person .... Any help would be appreciated .... Thanks so very muchI am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
and for the monitor:
http://h30499.www3.hp.com/t5/Monitors-Experts-Online-Now/bd-p/bsc-1255
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
My speaker systems are not working help me please
i have a speaker systems sbs vivid 80 they look ok the light is on when i swich them on but they are not working
Try testing the speaker on another audio source and see if it works.
Jason -
Systems are not visible in SM Work Centers
Hi,
I am facing strange problems in the Solution Manager Work Centers.
I have connected some managed systems to the Solution Manager, their data can be displayed normally in SMSY, SLD, solution_manager, ccmsping availabilty in RZ20....
But when I go to the workcenters, there are no systems listed (tabs like System Landscape Management, System Monitoring). What is strange
- I can see CCMSPING statuses in the top of the screen (red/green/gray icons with numbers of systems) but I cannot see the list of systems.
- RCA tab is correct, but this is special configuration in my opinion, so not related to my issue.
I suppose this is somehow related to the queries but I haven't been able to find a solution.
I checked filters, but with no success.
I have full authorizations (sap_all, SMWORK roles).
Version of system: SM 7.01 / SPS 28, managed systems ERP6 or NW7.3
Thanks a lot for advice!
VasekHi Jansi,
I have checked solman_setup, everything seems to be fine. I assigned to my user sap_all and all SMWORK roles, so there shouldn't be any authorization issue.
What is strange, I can see the list of systems in some filters, when I open Favourites management popup windows or for example on the Downtime management tab. But System Management shows only availability icons with correct numbers, all other data are empty (All Systems (0) ABAP Systems (0)Java Systems (0)Favorites (0))...
Why?
Vasek -
System is not recognized by monitor
for about a month, the system would freeze after about 6 to 8 hours of use. The screen would be filled with small rectangles and the only way to get out of this was to turn off the power at the front botton blue ready light, pushing for about 4 seconds. The monitor would say "sytem will turn off because of no RGB signal, andd sure enought the monitor would turn off. It would work again the next day for 4 to 8 hrs andd then same problem. This went on for about a month. Now it's totally not working at all, as soon as I turn the power on the fans come on at full speed, the green light is on in the back and the blue light comes on right away in front, where normally it would be orange until the system was ready to go and the blue light would come on. I have done the hard reset, pulling even the power cord for a few seconds and as soon as I plug it back in the computer tower, the blue light comes on right away and the fans are at full blast. I have had this computer for over 10 yrs, never changed anything in it. Just opened it up last night and vacuumed it very carefully with power cord off. Could it be that the cmos battery is dead and would this create this kind of problem? I have never replaced it. And if I do replace it do I have to do anything to restore the computer to it's operating form? I am not a computer wiz but I am fairly handy and good with instructions. Would appreciate your help. Thanks. JP
Hello @paparaut ,
I understand that after 10 years your monitor is starting to have issues with recognising your computer. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Hi All
I have put mac os update from 10.9 to 10.9.5 from mac app store. Update wants restart and I do that. First it shows installing updates on monitor and then after waiting for more than 30 minutes, it did not restart. On monitor it shows no signal now. I have checked all the connections. Mac mini LED light is showing blue color and i think its signalled the ON mode. Also mouse lights are on. Please provide help, as I need to solve it asap.
ThanksBoot to recovery and first try repairing the startup disk via dis utility.
Next reinstall the OS via Recovery
OS X: About OS X Recovery -
Business systems are not reflecting in Int. Directory
Hi All,
I am getting a problem regarding business systems. Any business system which i have in SLD is not showing up in the ID when I am doing the configuration.
Somebody suggested SLDCHECK...
When I run this transaction I get the message that "Connection with SLD does not work". Is it related ?
Many Thanks,
Mona.Hi,
The Integration server is not connected to the SLD.
Please check if you have done the following
1. Updated transaction SLDAPICUST with SLD server details information
2. Create TCP/IP connection in LCRSAPRFC and SAPSLDAPI in the trnsaction SM59
3. Create the same in the visual admin.
All the details are given in the SAP XI configuration Guide.
Regards
Vijaya -
Systems are not available in the NWDS but in the Web-client
I'm at presnt using the VC 7.11 in the web client. For enlarging the default components by a couple of own one I'm trying to use VC in the NWDS. Now I'm facing the problem that the default systems (Busniess Objects, Portal Content, Portlet Applications, Services Registry, Visual Composer Model, Web Dynpro Application, Web Dynpro Component) are shown in the "Search" panel but not those which I have created e.g. our ERP system.
I have no clou what I'm doing wrong.
Thanks a lot for your help in advance.Ok, it seems I was finally able to answer my questions by my own. For a System in the NWDS you have to create the system once again under Window > Preferences > Destination Configurations > R/3 Configuration ([https://cw.sdn.sap.com/cw/docs/DOC-102007?treeid=DOC-99669|https://cw.sdn.sap.com/cw/docs/DOC-102007?treeid=DOC-99669])
-
Started receiving "This site untrusted...."messages on sites I open all the time in Mozilla. I have tried the fixes in the help section but problems continue. Also, some sites like facebook don't appear correctly, just text and no regular graphics etc. Even Mozilla help is "untrusted". Sometimes aI can bypass the message by allowing the certificate, but not always. All of a sudden it seems like Mozilla just "blew up" and I can't find a solution -even after trying all the suggestions in the help area.
One of the most common reasons for having problems with ALL secure certificates is a problem with the date and time on your computer. For example, if the date got set one year forward or backward. You would expect this to cause the same problem in all browsers.
If you expand the Technical Details section of the error page, do you see an error code such as the following in most of these cases:
* sec_error_untrusted_issuer
A common problem recently is Firefox not being set up to work with your security software. Some security suites include a filtering feature. In order to filter secure connections (HTTPS URLs), the security software presents a fake certificate to Firefox so it can intercept and stand in the middle of the secure connection. To have Firefox trust these certificates, you may need to do something such as import a root certificate, or click something in your security software's settings.
Of course, the problem also could be caused by spyware.
Please check the "Issued by" section on one or two of the exceptions you've made to learn more about the source of this issue.
orange Firefox button (or Tools menu) > Options > Advanced > Certificates mini-tab > "View Certificates" button > Servers tab
Click a certificate and use the View button. The kind of issuer you might find is:
* Name associated with your security software, such as ESET, BitDefender, etc.
* Sendori (indicates unwanted software from Sendori)
* FiddlerRoot (indicates unwanted software named similarly to BrowserSafeguard, BrowserSafe, SafeGuard)
* Something else
What do you see?
Maybe you are looking for
-
Migrating iPhoto Library results in just one iPhoto Event...?
Full story as quickly as possible: I upgraded to Mountain Lion, but that didn't go well. Two trips to the Apple Genius bar and we decided that we had to reinstall the operating system which would render the computer effectively brand new. I was also
-
Question about decimal places for currencies
hi ,experts , here is the problem , when i use mb5s, i found the net price has been enlarged 1000 times . I also found the data of the table EKPO has been enlarged 1000 times. So ,i check the decimal places for currencies , i found there are five
-
Merging 2 documents using XSLT
hi All, I am new to XSLT. I am having two xml documents which will like the below: document x <ModelObject ParentID="1735313271" UniqueID="335539509" ext="kpi" fromServer="true"> <attr name="UniqueID" stringvalue="335539509" /> <attr ParentID="173531
-
Dem2vid - script to capture & encode nexuiz demos
Simple script to encode a .dem to an aac/avc video. To produce a high quality mp4 simply specify the demo to encode in addition to your desired width & file size. If no file size is specified a VBR encode will be done.The demo file must be within you
-
Hi guys! I need some help regarding control projects in weblogic. I have a control deliverable project in one application and I want to use the same code in another one.So I packed that control project as jar file and then imported in another one.I a