Systems are out of sync

Our BID and BIP systems are out of sync. We do not have a BIQ system. We would want to make changes and transport to BIP. What should we do because we wouldn't want to change something on BIP. We would think that we would try to manually do a comparison between the systems, but there may be a chance that we would leave something off, and we would transport something that would change the existing production environment. Should we do a client copy? What other different ways to copy the production system to a development system.

Hi,
Pls chk this links for BW System copy:
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c684ba111d189750000e8322d00/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
http://help.sap.com/saphelp_nw04/helpdata/en/ff/9be1817d811c41985662da25061f98/frameset.htm
/people/brian.mckellar/blog/2004/06/16/bsp-performance-measuring-roundtrip-latency
Also look at this how to guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
/manfred
*Hope this helps*
Regards
CSM reddy

Similar Messages

After December 2013 update PPro says merged clips are out of sync. They're not...

After I downloaded the latest update (December 2013) and opened my feature length film project, almost all of my sequences tell me that the merged clips (dual system) are out of sync. Yet, when playing them back, they are all perfectly in sync. In fact when I use 'slip into sync' option, the clips go OUT of sync. One clip, for instance says: Video +10:14, Audio -10:14. They all follow the same pattern. Any ideas what this was caused by? Should I just ignore it? Thanks.

same problem here, new merged clips are marked as out of sync (+- 10:15), allthough perfectly in sync.
this happens independently if i check the "use audio timecode from clip" option or not.

How can I adjust video from two cameras that are out of sync?

Hi - I've just recorded someone speaking on two cameras with the intention of cutting clips in from the second camera while using the video and soundtrack from the main camera, however the two video files are out of sync by half a second or so by the end. How can I 'stretch' the shorter clip so they coincide properly? Thanks, David.

David
What version of Premiere Elements are you using and on what computer operating system is it running?
Typically, select the clip,
as you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once. Each tap = 1 frame nudge.
as you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once. Each tap = 5 frames nudge.
If you are working with audio editing, consider Edit Menu/Project Settings/General with Audio Display Format = Milliseconds.
Please let us know if any of the above worked for you.
Thank you.
ATR

My itunes video's are out of sync

hey guys
my music videos are out of sync------when i play them the sound always comes before the video if you know what i meen
any ways to fix this
cheers
jack

Are they legally or illegally downloaded videos? If they are illegal, check that the original file isnt out of sync. If it isn't, and you used a program to format the video to play on ipod, play the formatted version on your computer and see if that is out of sync or not. I suspect that this will be the case as a lot of programs out there don't do very good jobs of formatting videos.
If you did it legally though, I'm not sure how you'd solve the problem.

Photo Booth Audio and Video are out of sync?

Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.

I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
Just open Quicktime Player and under the File menu you'll see "Record New Movie."
The downward slide continues...

Video and sound are out of sync

The picture and sound my Apple TV are out of sync by several seconds. THese are on items that have been copied to Apple TV as opposed to streaming from iTunes. Anyone have experience with this? What's the solution?
Thanks.

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

Audio & video are out of sync (help!)

Please help, all of a sudden, my video and audio in my timeline and browser are out of sync. In the timeline, some audio clips match w/ their video, some don't. What's up with that? I've been editing this timeline for weeks, I had no problem until TONIGHT. In the same timeline or sequence, some clips are out of sync w/ their audio. Could it be something to do with dropped frames? I have this window that comes up now (whereas it didn't before) and in red, it reads:
RT Extreme has determed dropped were caused by slow disks. Please try:
-increasing the speed of your disk (huh?)
-decreasing the number of RT layers
-Limiting your RT bandwidth in User Preference.
I'm totally perflexed. Please help.
thank you
kchen

dear Jimmy,
I burned a tested DVD and the audio is fine. I guess the way I view was a bit misleading.
Thanks for your time...but i have another question. When playing my video back from the timeline, I still get this message in RED:
RT Extreme has determed dropped were caused by slow disks. Please try:
-increasing the speed of your disk (huh?)
-decreasing the number of RT layers
-Limiting your RT bandwidth in User Preference.
MY video disk has 150GB left, out of 250gb
my hard drive that has fcp has 120GB out of 300GB
do you know why my timeline keeps stopping and gives me this warning?
thanks Jimmy

ITunes on my Mac, iPhone, iPad are out of sync

I believe that somehow my MacBook air and iPhone4 and iPad are out of sync as I may have multiple ITunes log on's that could be the problem.
Is there a way to fix this?
Any help would be appreciated.

Anything here help?
iMovie: Improving audio and video synchronization
http://support.apple.com/kb/TA25603?viewlocale=en_US

Audio and Video are Out of Sync

Hello,
This seems to be a reoccurring problem for me and I'd love some help getting it resolved once and for all. After capturing footage, the audio and video are out of sync in the clip AND when I drag it to the timeline. When I go through each part, it looks like the video hesitates often, which seems to be causing the misalignment of audio. But, once it is moved into alignment, it goes out of sync again throughout the remainder of the one hour video.
I'm capturing through a Canon Optura 50 Mini DV and editing with FCP 6.0.1. I have checked that the audio mode is set to 16 bit on the camera, and the capture settings have the audio rate for 48 KHz.
This same problem occurred when I was capturing another event last week.
PLEASE advise. It won't get aligned even if I take the hours and hours to move the audio left and right frame by frame.

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

10.6 iCal week view and mini calendar are out of sync-how to fix?

How does one re-establish "sync" between the large window week view and the small mini calendar month view displayed on the lower left side? Mine is out of sync by a month. Thanks!

Are they off by always the same amount of time or they drift apart over time?
If the former, you may try a quick adjustment, though it is a manual affair. Control-click on the clip in the browser, choose "Open in Timeline" and try moving the audio to match.
If I remember correctly, DV tape audio could be recorded in 32KHz or 48KHz. The latter is the one that should be used, always.
Maybe this one was recorded at 32KHz?

After months, my loops and metronome are out of sync

I searched but couldn't find this: added some tracks to a metronome track, played them back and they are way off. I've recorded hundreds of tracks and they sync up no problem, added loops, still no problem. What could I have done to make everything out of sync? I can't record anything now.
Must be simple thing but 'sync' in HELP search produces nothing. Not sure what to look for.
Thanks

Been awhile- thanks for your reply. It just happened again. I moved a drum loop, changed the tempo. Then I added tracks and they are not syncing up with the drum loop. Each subsequent track appears to be in the same tempo as the drum loop.

Quicktime files offline - When re-linked, they are out of sync.

Opened a project and some Quicktime files were offline. When I re-linked media, shots were out of sync. Is this because Quicktimes dont use time code? Is there a way to avoid this. Any help much appreciated.

Quicktime does support time code - that is the whole underlying concept of how FCP works. Some factors that can contribute to time-shifts on relinking:
opening FCP5 projects in FCP6
speed changes
odd audio sample rates
non-native quicktime formats, such as clips created with SnapZ Pro
That is not to say that any of these conditions will cause sync shifts, I use all these features and workflows and almost never have issues.
The biggie is that you need to be sure you are linking to the right clips. How did they go offline in the first place? How were they created? Your clips don't happen to be named Untitled1, Untitled2, etc. do they?

Video images and sound are out of sync

Hi, I'm new to videocasts so please forgive me. I have a few video podcasts that play fine in iTunes and in other iPods but audio and images become out of sync when I play it on my Nano. Does anyone have any suggestions?

What format were the original items ?
What frame rate are they in the original ?
What format are they on the AppleTV (H264 video AAC audio is the most common, but there are others) ?
What is the video frame rate now ?
Most out of syncs come from an imperfect attempt to encode for AppleTV. ie. DVD frame rate is 29.97fps. Many encode this to 30fps. So the movie plays 0.1% too fast, too little for you to notice, but at the end of a 100 minute film, the audio is 6 seconds out of sync with the video. Or 3 seconds on a 45 minute TV show.
Also check the source. I'd had DVDs (Alien Resurrection) jump 10 seconds out of sync in the middle of the movie. Back to the shop for that one.

Transport Directory and queue are out of sync after the restore

Hi all
I got a DEV server. Running ECC6 on MAXDB over linux. One user deleted some tables and we restored the database. No file system is restored.
Now we are having issues with the transports as the tranport directory is the latest and database is having old data about 3 days old data.
I am not able to see the same objects that we released in the old transports before the restore neither I am able to re-import the transport.
Please let me know the best way to make this in sync with the file system transports available.
Thanks
Shafquat

Thanks for the response. I think I am not clear in my problem statement.
We restored the whole database. Nothing at the fie system level is restored. So Trans directory is having up to date work done (Released transports etc) but after the restore the information coming through the database is the old information. Like in SE10 the transport that was released earlier still showing released but showing less number of objects than the one we actually released before the restore. Even if we try to re-import the same transport it ends up in the error.
Please let me know how we can make file system and database in sync.
Thanks again for the response.
Shafquat

Audio and video are out of sync when exported.

I've been trying to export a clip from a sequence in fcp. I've marked in and out points, and use the export using quicktime option. And each time, the audio is out of sync with the video.

Yea it still won't let me post images, so here are the settings:
Sequence Settings: Frame size: 1920x1080 HDTV 1080i 16:9
Pixel aspect ratio: square
field dominance: upper.
Editing timebase: 30.
Quicktime settings:
compressor: H.264.
Quality: 100%
Audio Settings:
Rate: 48kHz
Depth: 16-bit
Config: Channel Grouped
Item Properties: comicsonspot.MP$
Type: Clip
Creator: Quicktime Player
Size: 1.7 GB
Tracks: 1V, 2A
Vid Rate: 60 fps
Frame size: 1280x720
Compressor: H.263
Ok, there's a bunch more settings, let me know if you need any other info. Thanks again!

Systems are out of sync

Similar Messages

Maybe you are looking for