Systems for HR Tigger in CUP

Hello,
I am using GRC 5.3 at my client location and wanted to know which HR systems can be connected to CUP to use the HR trigger functionality.
My client have their own home grown HR systems (non SAP). So can I connect this system to CUP to use the HR trigger functionality?
Regards,
Chintan

Hi Chintan,
Out of the box CUP supports connection to SAP HR. There is a vendor which provides adapters for other HR systems like PeopleSoft/Oracle HR. I am 100% sure that you can not use HR trigger or any other HR related functionality with a home-grown HR system. You can reach out to SAP or Greenlight technologies if the client wants to write custom code which can help you achieve integration with another HR system.
Alpesh

Similar Messages

ALE logical systems for business service or process

Hi,
I am trying to send an IDOC into my R/3 system. It is the same IDOC type that I have sucessfully sent out to parties. All the config is in place for communicating with the system, because I have sent others IDOCs in the past. However, they always were sent from another R/3 business system. They processed sucessfully.
I am now trying to sending IDOC's from a BPM,as well as, from a business service. They are under the "With Party" section of the directory. These obviously do not have logical systems, so when I try to send the IDOC I get
"Unable to convert the sender service Purchase_Orders to an ALE logical system", where purchase_Orders being the name of the business serice.
How can I handle this problem?
Should I hard code values somewhere?
Which ones?
I have read the other posts for the error above, but my situation seems to be different.
Help!
Chris

Hi,
To solve your problem, here my solution:
1/ In your Business Process of your ID (configurator), go to menu "Service > Adapter-specific identifier" and in the part "IDoc Adapter", write your Logical System.
2/ Create this Logical System on your target system (R/3).
WARNING: XI allows you to used a Logical System for only one service (Business Process). Thus, if you are several interfaces, you must used different Logical Systems.
Mickael.

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

I need to reinstall my operating system for 10.5 after seeing a file folder and question mark flashing on my start up screen. Can anyone help me with this?

Hello,
That means it can find the Hard Drive, or can't find the things needed for booting.
See if DU even sees it.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

How can I creat a security system for a truck, with Wifi camera playing on iPad/iPhone without 3G/LTE ?

Hello,
I want to create a wifi security system for a truck with cameras, but all the ones I found are IP. So I don't know if it's possible to use it only on wifi (not on 3G/LTE).
If you have an idea, it will be nice...
Thank you

that range of most wifi setup unless you want to pay alot!
would likely mean you could see about as much as the camera from where you were standing
a mifi or otherwise something which bridge a lan to the internet would work
make sure the camera have a webserver in it and then you can see it from any web browser where you put in the login and password

Error While Creating Technical System for SNC

Hi There,
I am trying to create technical system for SNC in SLD, I am not able to seee SNC as a s/w component/product in the list.
when I checked the list of components in SLD, I found SNC is there under product "SCMSNC" but this product is not in the list of products.
Please help me how I can get "SCMSNC" product in the product list.
Thanks,
Nishant

Can you please explain it little bit clearly?
I think you first create product, then SWC and then try to create Technical system.
While you will create the Technical system, in the last step it will ask you for installed products.
There you can specify ur product.
Thanks,
Hetal

Hi i wrote a java program for scanning a system for java.exe 's

hi ,
i wrote a program which scans the system for java.exe 's and then it captures them in a linked list and then i
iterate through it for "\\Java\\jdk1.5.0_08\\bin\\java.exe and my aim is to return true in case the linked list contains the string "\\Java\\jdk1.5.0_08\\bin\\java.exe" and stop scanning the system.
If the linked list does not contain "Java\\jdk1.5.0_08\\bin\\java.exe" it should return false.
But my problem is the program is continuing to scan the system even if the linked list has "\\Java\\jdk1.5.0_08\\bin\\java.exe"
Any sort of help is appreciated.
The code is as follows:
package com.installanywhere.exper;
import com.zerog.ia.api.pub.CustomCodeRule;
import com.installanywhere.exper.SearchTool;
* @author
public class eFileTool extends CustomCodeRule {
     /* (non-Javadoc)
     * @see com.zerog.ia.api.pub.CustomCodeRule#evaluateRule()
     @Override
     public boolean evaluateRule() {
          // TODO Auto-generated method stub
          SearchTool searchtool=new SearchTool();
          boolean valueTocheckfor=false;
          valueTocheckfor=searchtool.find();
          String someothervalue=Boolean.toString(valueTocheckfor);
          if(someothervalue.equalsIgnoreCase("true")){
               return true;
               //System.exit()
          else if(someothervalue.equalsIgnoreCase("false")){
               try {
                    Thread.sleep(5000);
               } catch (InterruptedException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
          System.out.println(valueTocheckfor+"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
          return valueTocheckfor;
The code of search tool is
package com.installanywhere.exper;
import java.io.*;
import java.util.*;
public class SearchTool
     * @param args
static     boolean valuesToReturn=false;
static     boolean anothervalueToRefer=false;
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          SearchTool           t = new SearchTool();
          System.out.println("xxxxxxxxxxxxxxxxxxxx");
          boolean someArgument=t.find();
          System.out.println(someArgument+"iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii"+"");
               public boolean find()
                    System.out.println("2222222222222222222");
               boolean someThing=searchcomp("java.exe");
               System.out.println(someThing+"inside the othere one");
               return someThing;
          public boolean searchcomp(String file)
               System.out.println("3333333333333333333333");
               File[] drives=File.listRoots();
               boolean valueIdentified=false;
               for (int ctr=0;ctr<(drives.length-1);ctr++)
                    valueIdentified=search(drives[ctr],file);
                    System.out.println("4444444444444444444");
               System.out.println(valueIdentified+"something i need to accomplish");
               return valueIdentified;
               public boolean search(File dir,String file)
               File[] directories=dir.listFiles();
          System.out.println("55555555555555555555555");
               if (directories == null)
                    System.out.println("666666666666666666666666");
               return false;
               for(int ctr=0;ctr<directories.length;ctr++)
                    if(directories[ctr].isDirectory())
                         System.out.println("77777777777777777777777777");
                         valuesToReturn=search(directories[ctr],file);
                         System.out.println(valuesToReturn+"india is great");
                    else
                         if(directories[ctr].getName().equals(file))
                              String path = directories[ctr].getAbsolutePath().toString();
                              System.out.println(path);
                              List someList=new LinkedList();
                              anothervalueToRefer=allPaths(path);
                              System.out.println(anothervalueToRefer+"god damn it");
                                   //System.out.println(anothervalueToRefer+"let me seeeeeeeeeeeeeeeeeee");
                              return anothervalueToRefer;
               return valuesToReturn;
               public boolean allPaths(String allPath)
                    List l=new LinkedList();
                    String somepath=allPath;
                    l.add(somepath);
                    //return l;
/*if(l.contains("C:\\Program Files\\Java\\jdk1.5.0_08\\bin\\java.exe")){
                         System.out.println("yepeeeeeeeeeeeeee");
                         //System.exit(0);
else{
     System.out.println(" the face");
                    ListIterator li = l.listIterator();
                    System.out.println("inside the method of all paths");
                    if(li.hasNext())
                         if(li.next().toString().contains("\\Java\\jdk1.5.0_08\\bin\\java.exe"))
                         System.err.println(somepath+"this is the path i wanted to resolve correctly");
                         return true;
                         else{
                              System.out.println("trueeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee");
                                   return false;
                    else {
                              return false;
     }

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum.

Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?

Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?

Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.

Automitic source of supply assignment in backend system for SRM

Hello Experts,
I am facing one issue regarding source of supply for SRM purchase Requisitions in backend ECC system.
When we create a shopping cart in SRM 5.0, a purchase requisition is created in backend and has source of supply assigned to it.
I donu2019t want to assign source of supply to purchase requisitions created for SRM.
Can you please suggest how to achieve this?
Also I think, SRM is internally using BAPI u201CBAPI_REQUISITION_CREATEu201D from backend ECC system for creation of requisition. This BAPI has an importing parameter u2018AUTOMATIC_SOURCEu2019, and if we pass space to this parameter, it creates requisition without assigning source of supply.
If this is correct, then can I use any BADI or customization in SRM to set the value of this parameter as space when SRM calls this BAPI?
Thanks in Advance.
Thanks and Regards,
Sanjay

SPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
waht is the settings you maintained for your product category / purchase group - external procurement .
the above setting determines your follow on documents in the backend systems.
as discuused in the thread are you using any BADI ?
Unable to create PO in backend system for a text material in Shopping cart
peter offers how to debug to ..in the above link.
br
muthu

HT1553 What is the best system for a real time cloud back up of documents? My MacBook crashed, and I lost 2 hours of writing and could not find a way to restore it.

My MacBook Pro crashed while I was rewriting a book, lost more than an hour of work and could not find a way to restore it. Did not have Time Machine set up, but it appears that Time Machine does not have Real Time back up and documents must be manually stored.
I need an automatic, real time back up to keep this from happening - I'm not happy my MacBook has crashed twice now. What is the best cloud system for Real Time backup? Thanks to anyone who can help me, I'm not the most astutde computer guy... James

One way would be to use Dropbox, or a similar sync service, and just keep your critical documents in the appropriate folder. Dropbox, at least, keeps a local copy of everything and syncs automatically to the cloud whenver a change is made. Dropbox is free for up to 2GB of data.
There are also true backup services such as CrashPlan+:
http://www.crashplan.com/consumer/crashplan-plus.html
which provide automatic backups whenver a change is detected. It's not free, but usually such services aren't too expensive unless you need to back up a lot of data.
Regards.

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

I have bought Mac Os X Mauntain Lion Operating System for my mac book pro.I reinstalled my system.Now I cannot download it.It says"This product is not avaible for Turkish App Store".How can I get the Operating System?

I have bought Mac Os X Mauntain Lion Operating System for my mac book pro some time ago.I then reinstalled my system.The original operating System on my Mac is 10.7 Lion. Now I cannot download Mac Os X Mauntain Lion Operating System.It says"This product is not avaible for Turkish App Store".How can I get this Operating System?

http://www.apple.com/tr/support/

Changing the data in DataSource in R/3 System for Project System

Can we change the data of DataSource which is extracted from R/3 sYSTEM for Project System Module?

Hello Rajesh,
You can modify it in PSA. Or write the routines or rules logic as per your requirement.
Could you please elaborate more on what kind of changes you are interested for.
San.

Logical System for RFC-Business system?

Hi,
I want use RFC adapter for my scenario like File to RFC.
The query is like, is there any importance to use Logical system for my Business System which is using for my RFC Adapter in my communication channel.
Regards
Gopi

logical system name is relevant only for Idocs, but it is always a good idea to maintain the technical and business systems with all the information you can provide.
you can check the logical system names of ABAP application servers at bd54 tx code.
Regards,
Henrique.

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

How to create Logical System for ALE?

Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.

Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi.

Systems for HR Tigger in CUP

Similar Messages

Maybe you are looking for