SystemUIserver eats up A LOT of memory

Just yesterday SystemUIserver had eaten 500MB+ of memory which is bad since I've only got I GB installed RAM so far. I quit the process which remedied the problem but only temporary. After a few hours it had already consumed about 250 MB.
I don't like the idea of having to check activity monitor all the time just because I haven't saved up for those 4 GB yet.
Anyone with the same problem? Oh, and I have no hacks or anything installed. Just a plain vanilla install of Leopard.

systemUIServe and loginwindows is using 800+1gb of my ram. I m rearching for a fix  did you solve yours?

Similar Messages

  • SystemUIServer is using a lot of memory

    My systemUIServer is using a lot of memory like 300MBof memory. I can quit the serives which is relaucnched since it's a launchd and will gradually go back to eating up memory. I also have noticed the LoginWindow process eats up a lot of memory. Does anyone know what could be causing this

    systemUIServe and loginwindows is using 800+1gb of my ram. I m rearching for a fix  did you solve yours?

  • Safari 2.0.4 - Uses a lot of memory  ??

    Hello,
    I own an Intel iMac MA200.
    I noticed after Safari's 2.0.4 update that it uses a lot of memory, sometimes even as much as 200MB
    The cure I found is to restart Safari.
    Sometimes, I need to even Force Quit it.
    When I finish using my iMac, and close the Safari windows but let it keep running (red button), go to sleep, and in the morning check how much memory it takes, it's more then 100MB,
    I suspect there is a memory leak with Safari 2.0.4
    My OS X version is 10.4.8.
    I wonder if there is a known problem with Safari, and if there will be a new update released soon (2.0.5 ?) that will solve this problem, because I didn't have this problem with 2.0.3 .
    Thanks in advance,
    Idan Mashaal.
    iMac MA200 (Intel 20")   Mac OS X (10.4.8)   1GB single Dimm RAM

    Hey !
    Thanks for the post!
    Sience the Gmail upgrade, Safari stopped being my default browser.
    I'm using JCraig's optimized nightly builds for Camino (1.2+)
    They seem very memory friendly and Intel Optimized.
    http://homepage.mac.com/WebObjects/FileSharing.woa/wa/default?user=joelcraig23&t emplatefn=FileSharing2.html&xmlfn=TKDocument.2.xml&sitefn=RootSite.xml&aff=consu mer&cty=US〈=en
    I really hope Apple will fix the memory leak and Gmail fix there new interface (the little option button next to the new reply deosn't work - even with WebKit nightly) ASAP - sience SafariBlock and Saft doesn't work well with WebKit Nightly.
    I miss my Safari
    Idan.
    iMac MA200 (Intel 20")   Mac OS X (10.4.8)   1GB single Dimm RAM

  • I'm getting an error Out of memory message when I try to render - There's lots of memory

    I'm getting an error Out of memory message when I try to render - there's lots of memory and I've never gotten this before - any ideas?

    Thanks - I did go through and change all the profiles to Apple RGB, there are several to choose - but I'm still having problems - I think it has to do with corrupt  images - Im backing up and starting over - I've worked with images large and small for years and never had this problem - thanks

  • Component controller is consuming lots of memory

    Hi All,
    I have an WebDynpro application and a component controller (MyCompController) too where I have written most of the business specific code. The basis team informed that the component controller (MyCompController) is consuming lots of memory.
    Could anybody suggest me how to takle this problem. I dont have any other details and I am new to handle this kind of activity.
    Thanks & Regards,
    Patana

    Hi Patana
    Your controller can consume lots of memory because of lots of unnecessary data is loaded in advance and do not used actually. Try to analyze the following points:
    1. Unnecessary data is loaded into the context nodes in advance. Do not load all the data into the context in wdInit() method (do not fill in all the models too). This is not the right way. Instead try to use supply-functions for each context node with data. Supply-function will be called by Webdynpro automatically only when the data is actually required to be shown on UI.
    2. Unnecessary embedded Webdynpro components are created and loaded in memory in advance. Do not create embedded Webdynpro components manually in wdInit() method. Instead try to setup component usages with Create Mode option = OnDemand. Then Webdynpro will create the components automatically when this is really required.
    BR, Sergei

  • Flash builder 4.7 consuming lot of memory in VMware VDI environment.

    Flash builder 4.7 consuming lot of memory in VMware VDI environment. When we debugg the application then it is throwing out of memory exception. We need to close and relaunch Flash builder IDE numerous times. Can you please help us with setting changes we need to make for flash builder or VMware VDI environment so that we can resolve this issue?

    Hi Atul_Saini,
    So I checked your link and all seems correct on my computer.
    At the bottom of the link you provided there is "see also" section, about activation / deactivation.
    I did not deactivated my licenses before my window re-install, and if now I go to Flash Builder -> Help , desactivation button is greyed out. Could it be the source of my problem that I used my licenses on two computer and did not deactivated them ?
    If yes, how could I deactivate thoses products ? I searched on my profile but I can't find a way to do it.

  • When I regist function to lua,use a lot of memory

    when I regist c++ class and function to lua,the class or funtion may use templete.It use a lot of memory.
    Just registed about 1000 functions,The memory of running swf is about 1.8G.
    Then the swf exit without any exceptions.The same code run at win7,just need 100M.
    Can any give any suggestion？
    Thanks.

    I'm not sure what you mean by registering classes and functions. Have you tried running Adobe Scout on the SWF, it might give more info about what is taking up so much memory: http://gaming.adobe.com/technologies/scout/

  • Scrolling table need a lot of memory ?

    Hi,
    in my application I use a table to show some data acquisition result.
    I've seen that if I use the scrollbar the PC uses a lot of memory to update the table.
    Is it possible to set some property to update the table data just when I release the scrollbar?
    I see that if I move the scrollbar when the program acquire data the PC (dual-core) uses 100% of one core and sometime I got timeout in the acquisition.
    Thanks a lot

    How much data are you trying to display? 1M, 10M 100M pts?  you might want to display it in an array with the scroll bar turned on, you can make it look just like a table.  Tables ususally use strings and increase the ram required.  If you are using a huge data set you can not hold it all in memory at once and should purge the data to file as the data grows too large (RAM is a limited resource keep your data in ram to less than 10's of MB)  First thing move the daq out of the user interface, this should be in its own loop (see producer-consumer modes) your daq should never timeout.  I use in architecture with three loops for most of my daq with queued message passing, a GUI/event loop, a DAQ loop and a data processor/display loop.
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Sessions that consume a lot of Memory

    Hi,
    How to retrieve sessions that consume a lot of Memory (Database 11.2.0.2) ?
    Regards,

    791550 wrote:
    Hi,
    How to retrieve sessions that consume a lot of Memory (Database 11.2.0.2) ?
    Regards,Hi. You can query v$sesstat,v$statname and can join with v$session then you will get which session consume how much memory like below query
    select
            username,
            sess.sid,
            value,
            name
    from  v$sesstat sst,
            v$statname sn,
            v$session sess
    where sst.statistic#=sn.statistic# and
    sess.sid=sst.sid and
    username is not null and
    upper(sn.name) like '%MEMORY%'
    order by username

  • WEB reports exported to Excel -  occupys lot of memory

    Hi Experts,
    When I try to export a report from Web or Bex Analyser to Excel. The report consumes lot of memory.
    The same size of data in Original Excel file occupy less memory but when it is being downloaded from WEB and Bex takes lot of memory and It doesn't let me email as an attachment.
    Can anyone give me a solution for it please.
    Thanks

    Has anyone got a solution for this? Even I have same issue. User is trying to download the web report to excel, after downloading the file is too big (in MBs) and when the user opens and save again as .xls file, then file size is coming down to KBs. The default file type is Webarchive as I observed. Need to know if there is a way to change the default file type to excel.
    Thanks for your help/hints.

  • Mkmapview on zoom in or zoom out consumes lot of memory

    Hello,
    In my application i am using mkmapview as the main view and showing images (around 75 images) on the map by annotation.
    on zoom in or zoom out mapview consumes lot of memory and after some time it recives memory warning then application gets crash.
    any suggestion for that.
    Thank u in advance.

    Place the property node inside a case structure and enable it when the iteration terminal is "1". (not zero!)
    And please place a small wait inside your loop, there is no reason it should spin that fast. (Since the data never changes in your example, the entire graph terminal and inner loops belong outside the main while loop. However, I assume that your real application is different )
    NOTE: you could also use the "first run?" primitive or enable it when [i]=0, but in this case you would need a small sequence structure to ensure it happens after ther graph terminal is written for the first time.
    Also note that xy graphs take complex data, simplifying the wiring and data structures.
    LabVIEW Champion . Do more with less code and in less time .

  • FFox 3.6.8. Repeated problem. I close it, then hours later try to relaunch it, and it says it's still running. So I have to End Process in Task Mgr. Also, plug-container keeps running and takes LOTS of memory. Ergo, 3.6.8 is a step backward.

    FFox 3.6.8. Repeated problem. I close it, then hours later try to relaunch it, and it says it's still running. So I have to End Process in Task Mgr. Also, plug-container keeps running and takes LOTS of memory. Ergo, 3.6.8 is a step backward. I wish I hadn't upgraded. What can be done?
    == This happened ==
    Every time Firefox opened
    == I upgraded to 3.6.8. Not before.

    See http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)

  • Why the samples of 10_MessageChannel  which run using a lot of memory (330M)

    wether many pthreads communiation with each other , would prompt flacc alloc a lot of memory

    Thread with crossbridge require lots of memory. There is a better explanation here : The memory usage of threads · crossbridge-community/crossbridge Wiki · GitHub

  • Flash player 11.3.300.262 is using a lot of memory

    Since updating flash a few days ago the plugin has been using a lot more memory than usual. Normally it uses between 150MB to 200MB, but now i have seen it use up to 900MB.
    I've noticed that memory use increases by 5MB or more when navigating through a video until i have to terminate the plugin because of the ridiculous amount of memory used.

    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • My saved messages are using a lot of memory.  How do I free up the memory?

    My saved imessages are using a lot of memory (3.1GB) on my iphone.  How can I free up the memory?

    This is when I go to "usage" and it lists all of the memory used by certain apps.  Messages is the largest, and I swipe to the left to open it and it says that "saved messages" are using all of it.  There is no option to do anything at this screen.

Maybe you are looking for