SystemUIServer wants to connect to Port 192 via Little Snitch

Hey everyone...
Over the past couple of days my Little Snitch program has been reporting that "SystemUIServer" wants to make a UDP Connection to my router (192.168.2.1) via port 192.
This message only appears after I've booted up the computer and only has been coming up recently.
I installed the latest version of Little Snitch (2.1.4) last week but am not sure why the "SystemUIServer" process wants to connect to my router via port 192 just now out-of-the-blue.
Am I okay in putting a new rule into Little Snitch to allow this request "Forever" or should I be worried?
Message was edited by: dingdong2u

Is that the IP of your router? If so, it's most likely normal.
It may be some kind of data transfer between your router and the computer.
Does it happen with a direct Ethernet connection and WiFi or only one?
It's listed as OSU Network Monitoring System.
You might block it and see what happens.
Just click on the yellow triangular menu item for LS and turn it off forever and see if you notice anything not working correctly.

Similar Messages

I want to connect a usb drive via adapter cable to...

I want to connect a usb drive via adapter cable to my nokia C2-01.is this phone support usb otg feature as in nokia x2-00?if not then please recomend a method to connect a usb drive to this phone..
Solved!
Go to Solution.

Hi mate,
Sadly the Nokia C2-01 does not support USB OTG functionality. There is no method AT ALL to connect a USB device to this phone in the way that you have stated. If you require storage then instead of a USB drive you can use a microSD card up to 32GB, as the phone supports it.

I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

I want to connect tone port UX1 interface so my mac recognises it ?....

I want to my line 6 UX1 interface to be recognised by my mac....

If the device follows Apple audio interface protocol, then you should see it in the Systm Preferences Sound window. If not, then check the manufacturers website, for the current driver to install on your computer first.
GarageBand can only "see" a MIDI or Audio interface if it is recognized by the system. It will be listed in the System Preferences (for Audio devices only) or the Audio MIDI Setup utility (for Audio and MIDI devices).
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Can I connect two actiontec mI424wr via coax?

I have a new addition in my home, with an home entertainment area with poor reception from my current actiontec router. I have acquired a second Actiontec off eBay that I want to connect to my coax in the new addition so I can add some "wired" ethernet connections to the xbox, sling, blu-ray etc. I have seen many posts about a MOCA bridge, but I am not sure that is really what I a trying to do. I have an existing Actiontec, that is controlling the menus and VOD for my TV service. I just want to connect the second router via coax so I have faster and reliable internet in this new addition as well. Help! I am somewhat technically savvy, and can follow config instructions, but not a networking expert. Thanks.

The MoCA bridge is exactly what you want. While you can reconfigure the second ActionTec to essentially act as a MoCA bridge (there are links here on the forum as well as DSLreports on how to do it), I would encourage you to just go with the bridge as it's much simpler (there is no configuration required).
Simply install the MoCA bridge (ActionTec HME2200/ECB2200) and connect it to an active Coax connection in your addition. It will pair with the primary ActionTec router elsewhere in the home. Then, if you have more than one device that needs connected, get a small switch (not router) online -- should run you less than $20 for a 5 or 8 port unit -- and connect it to the MoCA bridge and all of your devices -- again, no configuration required.
If you decide you really want to use the router instead, you essentially need to disable all of the WAN interfaces (so it doesn't fight with your primary router trying to get an internet address) and then disable the LAN features such as the DHCP server so that it essentially acts as a MoCA bridge with 4 port switch.

My ipad does not want to connect to my home wifi's, worthless. why has this just happened. is apple aware?

In the last 2 days my Ipad does not want to connect to the internet via my home wifi's i have not done anything different so cany understand why this is happeniong. it just wont connect. Its a good job i have my 3g connection otherwise it would be worthless. i have tried resetting my wifi connections on my pad and unplugging the modem and resetting that. nothing is working. i have read several forums about this and seems to be an issue with a lot of ipads, i have read what you can do, however i dont think i should have to reset this, reset that, change this and change that when clearly its an apple issue.
can someone provide me with any simple way of fixing this issue. or can apple spend a little bit of their millions of dollars of profit to fix this little proble.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

PC Suite - connect only ONE phone via Bluetooth?

Every time I launch the PC Suite to connect MY phone via Bluetooth, every Nokia phone in the house -which was once connected to the PC Suite- gets asked to connect, many times. This is very annoying for other people who obviously have no intention of using the PC Suite at that moment.
I just want to connect MY OWN phone via Bluetooth. Is this possible somehow?
I know the phones can be set to connect automatically, so that they don't get nagged, but that's not a good solution. There should be an option to select which phone(s) to connect.

Hi,
Is it alright to un-pair your PC's bluetooth connectivity on other phones[On rest of the phones, they can unpair bluetooth connectivity with your pc], so that they wont get connected unless and until they want to connect?

Nsurlsessiond wants to connect to Amazon S3

Hi forum.
My Little Snitch tells me that nsurlsessiond wants to connect to Amazon S3. From what I know (which is not too much), nsurlsessiond has got something to do with iCloud. And Amazon S3 is some kind of cloud storage at Amazon. What does this mean – does iCloud buy storage space at Amazon or what? Should I allow the connection or not?

Now Little Snitch tells me that imagent also wants to connect to Amazon S3, and that seems to have to do with iMessage images for some reason being stored at Amazon or relayed that way. Interesting that Apple seems to have this deal with Amazon.

Smbclient wants to connect to TCP port 139

On my Powerbook, using Little Snitch under certain conditions (undetermined) I get the following message repeatedly, I am not connected to a network (except for Airport) or printer:
The application "smbclient" wants to connect to 192.168.131.65 on TCP port 139 (netbios-ssn)
What is this all about - thanks.
PB G4 Al 17"

Airport is as much of a network as Ethernet is. Port 139 is the normal port for SMB connections. (At the terminal, try "grep 139 /etc/services".) What you want to do is figure out where your Powerbook was connecting to a Windows file or printer server on network 192.168.0.0 or 192.168.131.0. Are either of those the network address for your Airport network? You can see this in your Network settings.
Login Items is the first place to look for an alias that might trigger an automated mount, but another application (other than the Finder) could be looking for a file server, too (as another posted mentioned). You could try to grep for "192.168.131.65" in all the files in your Preferences folder, except if you have 10.4 they might all be binary now and you'd have to convert them to xml text first, using plutil (again in Terminal).

How connect to oracle RAC via the RSG using port forwarding

Hi all,
I got a problem trying to connect to oracle RAC via the RSG using port forwarding .
on command line i sue to connect :
sqlplus 'username/password@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=firstRACnode)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=secondRACnode)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=MSDP)))'
but when using port forwarding i forward the port 1521 to a local port and make ssh to the DB node ( as normal with other nodes but not RAC) but it never work with me for this situation
can any one give me a help ifthere is any changes should be done on the server side , or if any one faced such a problem and found a solution
Thanks,
Prathap.

782011 wrote:
I got a problem trying to connect to oracle RAC via the RSG using port forwarding .
on command line i sue to connect :
sqlplus 'username/password@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=firstRACnode)(PORT=1521))(ADDRESS=(PROTOCOL=tcp)(HOST=secondRACnode)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=MSDP)))'Not exactly sure what you are attempting, but if you doing port forwarding via ssh, the basic approach is as follows:
Step 1
Create a ssh tunnel from local machine to remote db server. Forward any local port (should not be a well known port or a port in the private/dynamic port range) to connect to the database server's listener port. If the ssh tunnel is into the db server itself, the connection (port forwarding) can be on localhost (as the Listener should be listening on it). Alternatively use a public IP of that db server.
Example (using OpenSSH on Ubuntu 9.4):
Local server port 1527 tunneled to port 1521 on database server 192.168.0.100 using o/s account johnd (we connect to port 1521 on db server via 127.0.0.1):
ssh -X -f -N -o ServerAliveInterval=3 -L 1527:127.0.0.1:1521 [email protected]
Step 2
Run sqlplus and connect to the local fowarded port on localhost, using the applicable connection settings (e.g SID/Service Name, etc).
sqlplus scott/tiger@"(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1527)) (CONNECT_DATA=(SID=orcl) (SERVER=dedicated)))"Note that the Listener must not hand our connection off - as the case would be when using RAC for example and connecting via a Service Name and not a SID. We need the Listener that accepts our connection to immediately hand us over to the database instance (via either a dedicated server or a shared server dispatcher process).

The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem. If I wanted to use a wireless cellular connection to the internet, how would I do that?

The Apple time capsule provides disc memory, a wifi network, and router functions. It would normally be connected to the internet via cable modem. If I wanted to use a wireless cellular connection to the internet, how would I do that?

If I wanted to use a wireless cellular connection to the internet, how would I do that?
The wireless cellular device would need to have an Ethernet port, to provide an Ethernet signal to the Time Capsule's WAN port.

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

Want to connect my ipod to another ipod via bluetooth ????

want to connect my ipod to another ipod via bluetooth ???? and send and reciev files can i do so ????

You can with this app. There may also be other apps too.
App Store - Bluetooth FileShare
Connie99, be careful when you say there are no solutions.

What is "ndat", and why does it want to connect to 0.0.0.0 on DIVERT port?

Whenever I connect to any wireless hotspot, LittleSnitch (a program that reports any ingoing/outgoing connections) says: "ndat wants to connect to 0.0.0.0 on DIVERT port 2560 (labrat)". If I click "allow" the connection works fine, if I deny the connection, the internet doesn't work. Does anybody have any idea what this is?
I just want to make sure I'm not inadvertently allowing my data to go through some connection and be vulnerable, etc.

I thought about that, but all that LittleSnitch does is report ingoing/outgoing communications. It doesn't create any. So I'm just trying to figure out what a program called "ndat" does, and what 0.0.0.0 on DIVERT port 2560 (labrat) means.
Has anyone heard of any of these things on OSX?

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

SystemUIServer wants to connect to Port 192 via Little Snitch

Similar Messages

Maybe you are looking for