Sysvol is not visible in my last domain controller
Hi everybody, I need some help with my last domain controller I had 2 DC's the one that had the fsmo roles crashed and after that I peform a Seizing of the roles and proceed to promote another DC after that DC was promoted I checked the SYSVOL and NetLOGON
shares and they were are not, I wait for 24 ours and after that checked the event log of recovered DC and I sow the 13568 Event ID from NTFRS service, that event recommended to configure the registry with the "Enable Journal Wrap Automatic Restore"
to "1", after that I restart NTFRS service and the SYSVOL and Netlogon Shares disapear, Now users can't logon and I can see the GPOS, What I should do?
Thanks in Advance.
Felxs
Felx
Make sure you perform a metadata cleanup
http://blogs.dirteam.com/blogs/paulbergson/archive/2009/06/09/active-directory-cleanup-the-most-common-question-i-see.aspx
Followed by diagnostics to ensure things are looking good
http://blogs.dirteam.com/ControlPanel/Blogs/postlist.aspx?PageIndex=4
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights.
Similar Messages
-
An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
Windows Server machine (there's a reason for this, so please understand that ;) ).
We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft. Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
came with Windows 2012 seem to work very well.
PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services. After doing all of that, the HP printer will not print anything. It's like all print
requests directly from the Windows Server go to Nil.
Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles. I even tried installing the
HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints. Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
Client PC's can print to it directly.
Does anyone have any suggestions we could try? Thanks in advance.While it is quite a while since this was posted - I can concur a similar issue exists.
We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil. The print server is hosted on a shared DC. Comparing to the initial posters details, for some reason
it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix. Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
all of those failed then tried a stand alone server os machine as a last resort which worked fine. Printing directly from Win 7 / 8 /8.1 clients to the IP always worked. -
WSUS server no longer works/clients not receiving updates after replacing domain controller
I first logged into the WSUS server and found that I couldn't launch the console, event log was full of errors about different web services not working. I ran
wsusutil.exe usecustomwebsite true
which appeared to correct that problem, but the WSUS server and all workstations report the following error code when checking for updates:
80072F76
Client WindowsUpdate log is full of the following:
2014-10-29 23:36:22:935 832 f48 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_LAST_MODIFIED) failed. error 0x80072f76
2014-10-29 23:36:22:935 832 f48 Misc WARNING: GetServerFileTime failed. error 0x80072f76
The upstream server and another downstream server are working fine. It is only this one WSUS server and clients on this segment of the network where a new domain controller was put in place last week.
Thoughts?Hi,
What's the port used by your WSUS server?
Usecustomwebsite will change the port number used by the WSUS Web services from 80 to 8530 or vice versa.
If you set this value to true, WSUS Setup will use port 8530 for its Default Web site. If you set it to
false, WSUS will use port 80.
If it doesn't work, please post the entire windowsupdate.log here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support -
Payload not visible in the XI monitor
In my scenario an xml message was successfully reaching its destination. The XI system was upgraded from support pack 13 to support pack 16. After that the process is still working fine as the XML message is still successfully reaching its destination. The issue we have is that the Payload is not visible in the last two steps of the monitor. We can see the Payload until Technical Routing in the monitor. But Call Adapter and Response steps do not have payload.
(TCode: SXMB_MONI)
when we double click a message we get XML message details and on the left hand side it shows following hierarchy:
XML Message:
Receiver Grouping
- SOAP Header
- SOAP Body
- Payloads
Request Message Mapping
- SOAP Header
- SOAP Body
- Payloads
Technical Routing
- SOAP Header
- SOAP Body
- Payloads
Call Adapter
- SOAP Header
- SOAP Body
<b>(( No Payload displayed, but present above!! ))</b>
Response
- SOAP Header
- SOAP Body
<b>(( No Payload displayed, but present above!! ))</b>
Any suggestions would be highly appreciated!
Thanks in advance.
FaiqHi faiq
This seems to be the normal behaviour starting with SP13 or 14. There was a discussion about this a while ago and I believe it turned out to be works as designed.
This is what was posted as final conclusion in Re: SXMB_MONI does not show payload after upgrade to SP15:
<i>According to SAP (OSS) this is working as designed. Apparently it was an error in the past that the payload was stored in the DB on the ABAP (IE) side when the AE is involved, as it would then be stored twice at DB level. This explains why this is not a problem when e.g. the IDOC adapter is used.
Anyway, the only way to let the system show the payload in SXI_MONITOR is to set the runtime trace level to 3 (full trace) and parameter logging to 1 (trace switched on).</i>
regards,
Peter -
Hi,
I have Windows Server 2008 Enterprise and have
2 Domain Controllers in my Company:
Primary Domain Controller (PDC)
Additional Domain Controller (ADC)
My (PDC) was down due to Hardware failure, but somehow I got a chance to get it up and transferred
(5) FSMO Roles from (PDC) to (ADC).
Now my (PDC) is rectified and UP with same configurations and settings. (I did not install new OS or Domain Controller in existing PDC Server).
Finally I want it to move back the (FSMO Roles) from
(ADC) to (PDC) to get UP and operational my (PDC) as Primary.
(Before Disaster my PDC had 5 FSMO Roles).
Here I want to know the best practice and Microsoft best recommended procedure for the placement of “FSMO Roles both on (PDC) and (ADC)” ?
In case if Primary (DC) fails then automatically other Additional (DC) should take care without any problem in live environment.
Example like (FSMO Roles Distribution between both Servers) should be……. ???
Primary Domain Controller (PDC) Should contains:????
Schema Master
Domain Naming Master
Additional Domain Controller (ADC) Should contains:????
RID
PDC Emulator
Infrastructure Master
Please let me know the best practice and Microsoft best recommended procedure for the placement of “FSMO Roles.
I will be waiting for your valuable comments.
Regards,
Muhammad DaudHere I want to know the best practice
and Microsoft best recommended procedure for the placement of “FSMO Roles both on (PDC) and (ADC)” ?
There is a good article I would like to share with you:http://oreilly.com/pub/a/windows/2004/06/15/fsmo.html
For me, I do not really see a need to have FSMO roles on multiple servers in your case. I would recommend making it simple and have a single DC holding all the FSMO roles.
In case if
Primary (DC) fails then automatically other Additional (DC) should take care without any problem in live environment.
No. This is not true. Each FSMO role is unique and if a DC fails, FSMO roles will not be automatically transferred.
There is two approaches that can be followed when an FSMO roles holder is down:
If the DC can be recovered quickly then I would recommend taking no action
If the DC will be down for a long time or cannot be recovered then I would recommend that you size FSMO roles and do a metadata cleanup
Attention! For (2) the old FSMO holder should never be up and online again if the FSMO roles were sized. Otherwise, your AD may be facing huge impacts and side effects.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password -
Upgrade a Domain Controller running Windows Server 2012 Datacenter Eval
Hello,
because I couldn't wait for Server 2012 to show up on Dreamspark Premium I installed the Datacenter evaluation version after I found this blog
post telling me, I could simply enter my key when I get it to upgrade to the full version.
After entering the command I get notified that "Changing this Windows edition is not supported online for a domain controller.".
The TechNet article for upgrading evaluation versions states the following:
"If the server is a domain controller, see http://technet.microsoft.com/library/hh472160.aspx for important steps to follow before proceeding."
and taking me to an article for installing/uninstalling ADDS without further comments.
Simply typing "slui 3" and entering my key states that I have to enter an eval key.
My question is: Is there a painless way to upgrade my 2012 DC without losing my AD config?
Regards,
HansHi,
Please refer to the following Microsoft TechNet article to confirm if the steps of converting to full retail version are correct.
Evaluation Versions and Upgrade Options for Windows Server 2012
http://technet.microsoft.com/en-us/library/jj574204.aspx
If the warning persists, it means Windows Server 2012 Domain Controller does not support such convert. If so, please install another Windows Server 2012 full retail version or
convert to full retail version and then promote it to an additional Domain Controller for this domain. After that, transfer FSMOs to this new Domain Controller and demote the original Domain Controller.
Regards,
Arthur Li
TechNet Community Support -
AD account logging to a remote domain controller for authentication
Hi,
I have a weird issue with an AD account using a different logonserver when authenticating to AD. A domain admin account uses the local site domain controller but another account is using a remote domain controller as logonserver. I'm using both account
to logon to the same server (CRM 2011). But when I issue the command "set l' from the command line, they shows different logonserver value.
My issue is the crm account is pointing to a remote domain controller (windows 2012 R2) which I don't want and should use the local site domain controller (windows 2008 R2). The reason being is that the CRM server is on a test network (isolated) and
when we test an upgrade of CRM addon product called Experlogix, the upgrade requires to get authenticated by AD but it fails and I think the logonserver is the issue. When the crm account is used on the test server it points not to the local site domain controller
but to the remote dc which is not in the test server.
Thanks for your help!!!
AAStart by checking that your are sites and subnets are well configured.
Use dssite.msc and make sure that:
You have AD sites that represent your physical sites
All the subnets in use are created and moved to the correct AD site
Your DCs belong to the correct AD site
You can read more about the DC Locator process here: http://social.technet.microsoft.com/wiki/contents/articles/24457.how-domain-controllers-are-located-in-windows.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
System DSN not visible to 'domain users', why??
We have a Windows Server 2012 R2 Remote Desktop Services RDS farm.
I set up a 32-bit *system* DSN properly with the 32-bit ODBC app for Crystal Reports 2011, a 32-bit app.
When a domain user opens CR the newly created DSN does not appear in CR, though it appears for an admin user.
Why is the system DSN not visible to the domain users per se??
I checked the proper registry item and gave 'Domain Users' read permission to it, still no work.
Certain users need to see the DSN so they can configure the report to talk to the proper server, database, etc.
System DSNs are supposed to be visible/usable to all users.
What should I do??
Thank you, TomFWIW some other DSNs are visible to CR2011 but nothing we can use, they were somehow automagically created during installation of other software stuff.
I've tried every way I can think of to install the DSNs (different providers, different accounts) but I still can not get the desired DSN visible to my domain user login after opening a Crystal Reports 2011 report and clicking 'change database location'...
I thought about and tried using a DSN-less connection string but that did not go very far...it would be usable, people could type in ID and password if they must, but I could not get it to even let that happen...I also did not quite know what the string
should be, the database itself is SQL Server 2012 (11.0), I don't know the exact version OTOH.
The Remote Desktop Services Hosts are all Windows 2012 R2...could that be the cause of the problem?? Every other server I've put system DSNs was 2003 or 2008...
Thank you, Tom -
Hit Counters not visible (non .mac domains)
I have my web page forwarded to a .com website and the hit counters are not visible. I can only see them when I view the links to individual pages from the .mac home page (that lists all my web pages and mail).
Is there anything I can do?
Here is my website: http://jpmensgroup.com
I have a counter on the main page, one on calendar page and on the blogs.
Thank you!
BobHi Bob!
Here is the real answer to your question...
I think what you meant to say is that your domain (http://jpmensgroup.com) is forwarded to your iWeb site which is, indeed, published to .Mac. So you are utilizing what is called "domain forwarding" from your domain registrar to your iWeb URL. Additionally, you are using the masking feature to hide the target iWeb URL.
The counters that you placed on your page are certainly there...and I believe they are counting correctly. However because you are using "Domain Forwarding" the counter will not be displayed and the only place you can check on your hits is on the .Mac Homepage. You might try turning off the "masking" feature and see if that allows your counters to be visible, but in my experience this has not helped.
To test out what I am talking about....load up your homepage using your domain http://jpmensgroup.com. No counter, right? Now Control-Click on your page and select "Open frame in new window"....Counter reappears!
Bob, if this answer has been useful to you, I was wondering if you wouldn't mind marking my reply as either "solved" or "helpful" using the little buttons available in the title bar of this reply. Good luck to you! Great looking site! -
DC on VM Restored after crash - Does Not allow PCs to Join Domain, or Domain Users to Log in
We currently had a RAID array crash and rebuilt our main server which housed VMs for our Web and DC.
The main server was restored from a bare-metal backup from 6 months prior to the latest backup of the VMs (not sure if pertinent)
Since the Restore, Domain computers cannot access file shares on the main server or VMs - "unspecified network error
0x80004005
Removed the main server from the Domain to re-join it due to some issues with logging in (even with a Domain Admin account) - Found that any PC removed from the domain was no longer able
to rejoin - Receive (Network path was not found error)
Domain Users cannot log in to their computers - Error reads "The trust relationship between this computer and the domain has been lost" - Domain Admin accounts can log in without
problem.
Have been working on it for two weeks and tried most of the things that I have found in others questions for related
DCDIAG results (run on DC VM) - More errors appear if run on the Server (Locator DcGetDcName(GC_Server_Required) call failed, error 1722 (same for PDC, TIME, GOOD_TIME, and KDC)
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC1
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
......................... DC1 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC1 failed test FrsEvent
Starting test: DFSREvent
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
......................... DC1 passed test SysVolCheck
Starting test: KccEvent
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
......................... DC1 passed test ObjectsReplicated
Starting test: Replications
......................... DC1 passed test Replications
Starting test: RidManager
......................... DC1 passed test RidManager
Starting test: Services
......................... DC1 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x80040022
Time Generated: 01/15/2015 19:32:28
Event String:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
A warning event occurred. EventID: 0x80040022
Time Generated: 01/15/2015 19:32:28
Event String:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
A warning event occurred. EventID: 0x80040022
Time Generated: 01/15/2015 19:32:28
Event String:
The driver disabled the write cache on device \Device\Harddisk0\DR0.
A warning event occurred. EventID: 0x000003F6
Time Generated: 01/15/2015 19:32:52
Event String:
Name resolution for the name DC1.Home.xxx.com timed out after none of the configured DNS servers responded.
An error event occurred. EventID: 0xC00038D6
Time Generated: 01/15/2015 19:33:25
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
A warning event occurred. EventID: 0x00000420
Time Generated: 01/15/2015 19:33:29
Event String:
The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service. This is not a recommended security configuration.
Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
A warning event occurred. EventID: 0x00002724
Time Generated: 01/15/2015 19:33:33
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
A warning event occurred. EventID: 0x000727AA
Time Generated: 01/15/2015 19:36:34
Event String:
The WinRM service failed to create the following SPNs: WSMAN/DC1.Home.xxx.com; WSMAN/DC1.
A warning event occurred. EventID: 0x00001695
Time Generated: 01/15/2015 19:59:52
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'Home.xxx.com.' failed. These records are used by other computers to locate this server as a domain controller (if the specified
domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 01/15/2015 19:59:52
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'DomainDnsZones.Home.xxx.com.' failed. These records are used by other computers to locate this server as a domain controller
(if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 01/15/2015 19:59:52
Event String:
Dynamic registration or deletion of one or more DNS records associated with DNS domain 'ForestDnsZones.Home.xxx.com.' failed. These records are used by other computers to locate this server as a domain controller
(if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).
A warning event occurred. EventID: 0x00000420
Time Generated: 01/15/2015 20:20:21
Event String:
The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service. This is not a recommended security configuration.
Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
A warning event occurred. EventID: 0x00002724
Time Generated: 01/15/2015 20:20:25
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
......................... DC1 failed test SystemLog
Starting test: VerifyReferences
......................... DC1 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Home
Starting test: CheckSDRefDom
......................... Home passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Home passed test CrossRefValidation
Running enterprise tests on : Home.xxx.com
Starting test: LocatorCheck
......................... Home.xxx.com passed test LocatorCheck
Starting test: Intersite
......................... Home.xxx.com passed test Intersite
All PCs can ping the DC, and get name resolution. Checked IPs, DNS on both WS and DC (DC points to its own IP address with no other DNS), Forwarders for DNS appear to be working,
as normal DNS name resolution and internet access works on all PCs. Have tried disabling NIC card and installing another NIC. All searches keep pointing back at the same things that I have tried. I feel like I am missing something stupid.
Please helpThe backup you used is too old. That is why your clients are experiencing trust relationship failures: the computer passwords are no longer matching so they are failing to connect to AD. You need to disjoin and join them again.
I understand that this is the only DC you have so please make sure that the DC is not multihomed, that it points to its private IP address as primary DNS server and 127.0.0.1 as secondary one. Also, you might need to rebuild your SYSVOL folder if you keep
getting the SYSVOL errors: https://support.microsoft.com/kb/315457?wa=wsignin1.0
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
AD Replication issues, SYSVOL / NETLOGON not replicating
Hello Experts!
We have a client that recently called us for some assistance. The IT department had a new virtual environment stood up. They Created 3 new VMs and promoted them all to domain controllers. The current domain and forest functional levels are (and were) Server
2003. There were two existing domain controllers, both Server 2003. The new domain controllers are Server 2012 R2. After promoting the 3 new servers to DC’s, they demoted one of the old DC’s. Then they transferred FSMO roles to a new 2012 R2 DC. When they
went to demote the last server 2003 DC, it was giving them the error that it is the last DC in the domain. That’s when we were called to assist. I have since demoted 2 of the 3 new 2012 R2 DCs and transferred all FSMO roles back to the Server 2003 DC.
I have been running some tools to try and gather data. Here is the DCDIAG from the last Server 2003 DC:
C:\Documents and Settings\user>dcdiag /fix
Domain Controller Diagnosis
Performing initial setup:
Done gathering initial info.
Doing initial required tests
Testing server: domainname\server2003server
Starting test: Connectivity
......................... server2003server passed test Connectivity
Doing primary tests
Testing server: domainname\server2003server
Starting test: Replications
......................... server2003server passed test Replications
Starting test: NCSecDesc
......................... server2003server passed test NCSecDesc
Starting test: NetLogons
......................... server2003server passed test NetLogons
Starting test: Advertising
......................... server2003server passed test Advertising
Starting test: KnowsOfRoleHolders
......................... server2003server passed test KnowsOfRoleHolders
Starting test: RidManager
......................... server2003server passed test RidManager
Starting test: MachineAccount
......................... server2003server passed test MachineAccount
Starting test: Services
......................... server2003server passed test Services
Starting test: ObjectsReplicated
......................... server2003server passed test ObjectsReplicated
Starting test: frssysvol
......................... server2003server passed test frssysvol
Starting test: frsevent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... server2003server failed test frsevent
Starting test: kccevent
......................... server2003server passed test kccevent
Starting test: systemlog
An Error Event occured. EventID: 0x0000410B
Time Generated: 02/18/2015 19:27:04
Event String: The request for a new account-identifier pool
An Error Event occured. EventID: 0xC4350607
Time Generated: 02/18/2015 19:28:22
Event String: Component: System Information Agent
An Error Event occured. EventID: 0xC00110CD
Time Generated: 02/18/2015 19:28:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00072787
Time Generated: 02/18/2015 19:28:22
Event String: The WinRM service is unable to start because of a
An Error Event occured. EventID: 0xC0060024
Time Generated: 02/18/2015 19:28:34
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC0002720
Time Generated: 02/18/2015 19:32:26
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC25A001D
Time Generated: 02/18/2015 14:33:27
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:33:28
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:33:31
(Event String could not be retrieved)
An Error Event occured. EventID: 0x0000410B
Time Generated: 02/18/2015 14:36:18
Event String: The request for a new account-identifier pool
An Error Event occured. EventID: 0xC4350607
Time Generated: 02/18/2015 14:38:48
Event String: Component: System Information Agent
An Error Event occured. EventID: 0x00072787
Time Generated: 02/18/2015 14:38:48
Event String: The WinRM service is unable to start because of a
An Error Event occured. EventID: 0xC4350505
Time Generated: 02/18/2015 14:38:54
Event String: NIC Agent: Connectivity has been lost for the NIC
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:39:00
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:39:14
(Event String could not be retrieved)
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168E
Time Generated: 02/18/2015 14:39:54
Event String: The dynamic registration of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0x0000168F
Time Generated: 02/18/2015 14:42:09
Event String: The dynamic deletion of the DNS record
An Error Event occured. EventID: 0xC25A001D
Time Generated: 02/18/2015 14:42:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:42:22
(Event String could not be retrieved)
An Error Event occured. EventID: 0x825A0011
Time Generated: 02/18/2015 14:42:37
(Event String could not be retrieved)
An Error Event occured. EventID: 0xC4350607
Time Generated: 02/18/2015 14:48:03
Event String: Component: System Information Agent
An Error Event occured. EventID: 0x00072787
Time Generated: 02/18/2015 14:48:03
Event String: The WinRM service is unable to start because of a
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:06
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:06
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:06
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 14:50:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x40000004
Time Generated: 02/18/2015 14:55:30
Event String: The kerberos client received a
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:36
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:37
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:37
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:38
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:11:39
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:07
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:08
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:08
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:09
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:09
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:09
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
An Error Event occured. EventID: 0x00000457
Time Generated: 02/18/2015 15:16:10
(Event String could not be retrieved)
......................... server2003server failed test systemlog
Starting test: VerifyReferences
Some objects relating to the DC server2003server have problems:
[1] Problem: Missing Expected Value
Base Object:
CN= server2003server,OU=Domain Controllers,DC=domainname,DC=com
Base Object Description: "DC Account Object"
Value Object Attribute Name: frsComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
[1] Problem: Missing Expected Value
Base Object:
CN=NTDS Settings,CN= server2003server,CN=Servers,CN=domainname,CN=Sites,CN=C
onfiguration,DC=domainname,DC=com
Base Object Description: "DSA Object"
Value Object Attribute Name: serverReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
......................... server2003server failed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : domainname
Starting test: CrossRefValidation
......................... domainname passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... domainname passed test CheckSDRefDom
Running enterprise tests on : domainname.com
Starting test: Intersite
......................... domainname.com passed test Intersite
Starting test: FsmoCheck
......................... domainname.com passed test FsmoCheck
C:\Documents and Settings\user>
Now the DCDIAG for the Server 2012 R2 DC.
2012R2DC
PS C:\Users\user > dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = 2012R2DC
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: domainname\2012R2DC
Starting test: Connectivity
......................... 2012R2DC
passed test Connectivity
Doing primary tests
Testing server: domainname\2012R2DC
Starting test: Advertising
Warning: DsGetDcName returned information for \\server2003server.domainname.com, when we were trying to reach 2012R2DC.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... 2012R2DC
failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL
replication problems may cause Group Policy problems.
......................... 2012R2DC
passed test FrsEvent
Starting test: DFSREvent
......................... 2012R2DC passed test DFSREvent
Starting test: SysVolCheck
......................... 2012R2DC passed test SysVolCheck
Starting test: KccEvent
......................... 2012R2DC passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... 2012R2DC passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... 2012R2DC passed test MachineAccount
Starting test: NCSecDesc
......................... 2012R2DC passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\2012R2DC \netlogon)
[2012R2DC] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
......................... 2012R2DC failed test NetLogons
Starting test: ObjectsReplicated
......................... 2012R2DC passed test ObjectsReplicated
Starting test: Replications
[Replications Check, 2012R2DC] DsReplicaGetInfo(PENDING_OPS, NULL) failed, error 0x2105
"Replication access was denied."
......................... 2012R2DC failed test Replications
Starting test: RidManager
......................... 2012R2DC passed test RidManager
Starting test: Services
Could not open NTDS Service on 2012R2DC, error 0x5 "Access is denied."
......................... 2012R2DC failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 02/18/2015 14:39:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could
be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/18/2015 14:44:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could
be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x40000004
Time Generated: 02/18/2015 14:47:09
Event String:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cr-dc3$. The target name used was C
RDC02$. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when t
he target server principal name (SPN) is registered on an account other than the account the target service is using. En
sure that the target SPN is only registered on the account used by the server. This error can also happen if the target
service account password is different than what is configured on the Kerberos Key Distribution Center for that target se
rvice. Ensure that the service on the server and the KDC are both configured to use the same password. If the server nam
e is not fully qualified, and the target domain (domainname.COM) is different from the client domain (domainname.COM),
check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify
the server.
......................... 2012R2DC failed test SystemLog
Starting test: VerifyReferences
......................... 2012R2DC passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : domainname
Starting test: CheckSDRefDom
......................... domainname passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domainname passed test CrossRefValidation
Running enterprise tests on : domainname.com
Starting test: LocatorCheck
......................... domainname.com passed test LocatorCheck
Starting test: Intersite
......................... domainname.com passed test Intersite
PS C:\Users\user>
From here I can see SYSVOL and NETLOGON are not replicating from server2003server. When I log on to server2003server and run ‘net share’ the SYSVOL and NETLOGON shares are shared. But, when I do the same on 2012R2DC there are no NETLOGON or SYSVOL shares.
I see ntfrs issues. So I ran ntfrsutl ds on server2003server and the results are here:
C:\Documents and Settings\user>ntfrsutl ds
NTFRS CONFIGURATION IN THE DS
SUBSTITUTE DCINFO FOR DC
FRS DomainControllerName: (null)
Computer Name : SERVER2003SERVER
Computer DNS Name : SERVER2003SERVER.domainname.com
BINDING TO THE DS:
ldap_connect : SERVER2003SERVER.domainname.com
DsBind : SERVER2003SERVER.domainname.com
NAMING CONTEXTS:
SitesDn : CN=Sites,cn=configuration,dc= domainname,dc=com
ServicesDn : CN=Services,cn=configuration,dc= domainname,dc=com
DefaultNcDn: DC= domainname,DC=com
ComputersDn: CN=Computers,DC= domainname,DC=com
DomainCtlDn: OU=Domain Controllers,DC= domainname,DC=com
Fqdn : CN= SERVER2003SERVER,OU=Domain Controllers,DC= domainname,DC=com
Searching : Fqdn
COMPUTER: SERVER2003SERVER
DN : cn= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
Guid : d3cfdf56-a013-40ab-a2e9ffc3d88896bd
UAC : 0x00082000
Server BL : CN= SERVER2003SERVER,CN=Servers,CN=domainname,CN=Sites,CN=Configuration,D
C= SERVER2003SERVER,DC=com
Settings : cn=ntds settings,cn= SERVER2003SERVER,cn=servers,cn= domainname,cn=sites,c
n=configuration,dc= domainname,dc=com
DNS Name : SERVER2003SERVER. domainname.com
WhenCreated : 5/29/2007 10:36:30 Eastern Standard Time Eastern Daylight Time
[300]
WhenChanged : 2/17/2015 11:21:58 Eastern Standard Time Eastern Daylight Time
[300]
SUBSCRIPTION: NTFRS SUBSCRIPTIONS
DN : cn=ntfrs subscriptions,cn= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
Guid : 5d0ca299-209d-4814-ae6d7acd9209e10a
Working : c:\windows\ntfrs
Actual Working: c:\windows\ntfrs
WhenCreated : 5/29/2007 10:50:26 Eastern Standard Time Eastern Daylight T
ime [300]
WhenChanged : 5/29/2007 10:50:26 Eastern Standard Time Eastern Daylight T
ime [300]
SUBSCRIBER: DOMAIN SYSTEM VOLUME (SYSVOL SHARE)
DN : cn=domain system volume (sysvol share),cn=ntfrs subscriptions,cn
= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
Guid : fb56d707-3c40-429f-bd7c63d227b9fb5d
Member Ref: (null)
Root : c:\windows\sysvol\domain
Stage : c:\windows\sysvol\staging\domain
WhenCreated : 5/29/2007 10:50:26 Eastern Standard Time Eastern Dayligh
t Time [300]
WhenChanged : 5/29/2007 10:50:26 Eastern Standard Time Eastern Dayligh
t Time [300]
SERVER2003SERVER IS NOT A MEMBER OF ANY SET!
C:\Documents and Settings\user>
Also worth noting that when we power down SERVER2003SERVER no computer can contact a logon server.
The last line of this worries me as well. I am going to continue to work on this but I wanted to get these logs to some other eyes in case you have some ideas off the bat. Thanks in advance!I would first recommend to make sure that the new DCs are also global catalogs and to refer to IP setting recommendations I shared here: http://www.ahmedmalek.com/web/fr/home.asp
It is possible to do a non-authoritative restore of SYSVOL to make it appear on the other DCs: https://support.microsoft.com/kb/290762?wa=wsignin1.0
However, you would need to upgrade to DFSR.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Active Directory domain controller could not be contacted
Hello
Help please.
I am trying to add a new server (2008) to domain 'bridgelimited.local' - only one DC (2003) doing everything at the moment. The plan is to add the new server, then move everything over from the old machine, then retire/upgrade the old machine and use as a backup.
I am currently trying to dcpromo on the new machine but I get the following error:
The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain bridgelimited.local:
The error was: "DNS name does not exist."
(error code 0x0000232B RCODE_NAME_ERROR)
The query was for the SRV record for _ldap._tcp.dc._msdcs.bridgelimited.local
Common causes of this error include the following:
- The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
212.50.160.100
196.168.16.2
- One or more of the following zones do not include delegation to its child zone:
bridgelimited.local
local
. (the root zone)
For information about correcting this problem, click Help.
192.168.16.2 is IP address for the DC.
Any help would be grately appreciated.
Kind Regards
RichardManaged to get the DCDIAG
Here goes (I know my harddisk is failing - that's why I am desperate to get everything shifted to the new server).
Domain Controller Diagnosis
Performing initial setup:
* Verifying that the local machine bridgeserver, is a DC.
* Connecting to directory service on server bridgeserver.
* Collecting site info.
* Identifying all servers.
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Connectivity
* Active Directory LDAP Services Check
* Active Directory RPC Services Check
......................... BRIDGESERVER passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\BRIDGESERVER
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=BridgeLimited,DC=local
Latency information for 2 entries in the vector were ignored.
2 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... BRIDGESERVER passed test Replications
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test Topology
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=BridgeLimited,DC=local.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... BRIDGESERVER passed test CutoffServers
Starting test: NCSecDesc
* Security Permissions Check for
DC=ForestDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
DC=DomainDnsZones,DC=BridgeLimited,DC=local
(NDNC,Version 2)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=BridgeLimited,DC=local
(Schema,Version 2)
* Security Permissions Check for
CN=Configuration,DC=BridgeLimited,DC=local
(Configuration,Version 2)
* Security Permissions Check for
DC=BridgeLimited,DC=local
(Domain,Version 2)
......................... BRIDGESERVER passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
......................... BRIDGESERVER passed test NetLogons
Starting test: Advertising
The DC BRIDGESERVER is advertising itself as a DC and having a DS.
The DC BRIDGESERVER is advertising as an LDAP server
The DC BRIDGESERVER is advertising as having a writeable directory
The DC BRIDGESERVER is advertising as a Key Distribution Center
The DC BRIDGESERVER is advertising as a time server
The DS BRIDGESERVER is advertising as a GC.
......................... BRIDGESERVER passed test Advertising
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Domain Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role PDC Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Rid Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
......................... BRIDGESERVER passed test KnowsOfRoleHolders
Starting test: RidManager
* Available RID Pool for the Domain is 2609 to 1073741823
* bridgeserver.BridgeLimited.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 2109 to 2608
* rIDPreviousAllocationPool is 2109 to 2608
* rIDNextRID: 2121
......................... BRIDGESERVER passed test RidManager
Starting test: MachineAccount
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :LDAP/bridgeserver.BridgeLimited.local
* SPN found :LDAP/BRIDGESERVER
* SPN found :LDAP/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :LDAP/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9._msdcs.BridgeLimited.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/96d36b0b-a148-4c2f-b3d3-8c2ac83fcaf9/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local/BridgeLimited.local
* SPN found :HOST/bridgeserver.BridgeLimited.local
* SPN found :HOST/BRIDGESERVER
* SPN found :HOST/bridgeserver.BridgeLimited.local/BRIDGELIMITED
* SPN found :GC/bridgeserver.BridgeLimited.local/BridgeLimited.local
......................... BRIDGESERVER passed test MachineAccount
Starting test: Services
* Checking Service: Dnscache
* Checking Service: NtFrs
* Checking Service: IsmServ
IsmServ Service is stopped on [BRIDGESERVER]
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: RpcSs
* Checking Service: w32time
* Checking Service: NETLOGON
......................... BRIDGESERVER failed test Services
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test
because /testdomain: was not entered
......................... BRIDGESERVER passed test OutboundSecureChannels
Starting test: ObjectsReplicated
BRIDGESERVER is in domain DC=BridgeLimited,DC=local
Checking for CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local in domain DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local in domain CN=Configuration,DC=BridgeLimited,DC=local on 1 servers
Object is up-to-date on all servers.
......................... BRIDGESERVER passed test ObjectsReplicated
Starting test: frssysvol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... BRIDGESERVER passed test frssysvol
Starting test: frsevent
* The File Replication Service Event log test
......................... BRIDGESERVER passed test frsevent
Starting test: kccevent
* The KCC Event log test
Found no KCC errors in Directory Service Event log in the last 15 minutes.
......................... BRIDGESERVER passed test kccevent
Starting test: systemlog
* The System Event log test
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:27
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:41
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:47:55
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:09
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:48:52
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:06
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:20
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:49:54
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:08
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:50:22
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:51:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:52:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:31
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 16:53:45
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:23
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:37
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:12:51
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:05
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:19
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:33
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:13:47
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:01
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:14:15
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:24
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:38
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:15:53
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:07
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:21
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:35
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:16:49
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:03
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
An Error Event occured. EventID: 0xC0040075
Time Generated: 09/10/2009 17:17:17
Event String: The driver for device \Device\Scsi\hpt3xx1
detected a port timeout due to prolonged
inactivity. All associated busses were reset in
an effort to clear the condition.
......................... BRIDGESERVER failed test systemlog
Starting test: VerifyReplicas
......................... BRIDGESERVER passed test VerifyReplicas
Starting test: VerifyReferences
The system object reference (serverReference)
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local and
backlink on
CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=BRIDGESERVER,OU=Domain Controllers,DC=BridgeLimited,DC=local are
correct.
The system object reference (serverReferenceBL)
CN=BRIDGESERVER,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=BridgeLimited,DC=local
and backlink on
CN=NTDS Settings,CN=BRIDGESERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BridgeLimited,DC=local
are correct.
......................... BRIDGESERVER passed test VerifyReferences
Starting test: VerifyEnterpriseReferences
......................... BRIDGESERVER passed test VerifyEnterpriseReferences
Running partition tests on : ForestDnsZones
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Running partition tests on : DomainDnsZones
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Running partition tests on : Schema
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Running partition tests on : Configuration
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Running partition tests on : BridgeLimited
Starting test: CrossRefValidation
......................... BridgeLimited passed test CrossRefValidation
Starting test: CheckSDRefDom
......................... BridgeLimited passed test CheckSDRefDom
Running enterprise tests on : BridgeLimited.local
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... BridgeLimited.local passed test Intersite
Starting test: FsmoCheck
GC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
PDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
Preferred Time Server Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
KDC Name: \\bridgeserver.BridgeLimited.local
Locator Flags: 0xe00003fd
......................... BridgeLimited.local passed test FsmoCheck
The only thing I can see (other then the HDD) is the
IsmServ Service is stopped on [BRIDGESERVER]
Hope you can help. Pretty please.
Kind Regards
Richard -
Images Not Visible but Loading within Spry
I've built out a site using Spry numerous times and never had
any problems. But the below site I'm having issues with in that it
works fine in Safari but the images load within the Spry region set
(div id="mainContent") but are not visible. The images are
definately there as they can be viewed in a seperate window or
downloaded to the desktop.
w/w/w/./sl/im/press/./com (ignore / for domain name)
I've tried commenting out various elements in the css and
html and nothing seems to remedy this problem. Any help would be
super appreciated as I'm super stuck on this! The images don't load
in Firefox or Explorer. Thanks!Hi bkerkay,
first try a rebuild of the library.
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Get back with results.
Lori -
Hi
I accidentally removed one of our domain controller's hyper-v image (DC-02) from the hyper-v manager and to bring it back online launched a new virtual machine using the same virtual hard drive. This brought back the domain controller machine and I set the
original IP address to the same assuming that everything would just working fine.
Sadly, that wasn't the case as when I tried to open the group policy manager on that machine I started getting "Access is denied" error. I was then presented with an option to open the group policy manager with the first available DC which I did
and was able to open it with showing the same machine as the baseline domain controller under the status tab (DC-01 is actually the baseline DC). I then clicked Detect now and noticed it was showing 1 DC under replication in progress with problems in GPO version.
I then did the same thing on the primary DC (DC-01) and even there it was showing this only (images attached).
So I started exploring over the internet going through various articles but couldn't find a solution which I could apply without worrying about corrupting something somewhere. I also went to the SYSVOL folder on both the DC's to check the version number
in GPT.ini files which are mentioned below:
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\CC-DC01\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5439513
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{6AC1786C-016F-11D2-945F-00C04fB984F9}
[General]
Version=3
\\cc-dc02\SYSVOL\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}
[General]
Version=5308439
Could anyone please help me sort this out? I am no system admin and whatever knowledge I have of setting up DC, AD etc is from following one article or the other over the internet.
Regards
Sajat JainHi
Apologies for responding late. I followed through all the points mentioned by Frank and even did a non-authoritative restore synchronization but still no luck.
I am attaching the output from the dcdiag /q and the from the event viewer after doing to non-authoritative restore synchronization.
DCDIAG /Q
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... CC-DC03 failed test DFSREvent
Unable to connect to the NETLOGON share! (\\CC-DC03\netlogon)
[CC-DC03] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... CC-DC03 failed test NetLogons
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:52:17
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 17:54:12
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:54:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:55:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 17:59:41
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:04:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x0000164A
Time Generated: 01/18/2015 18:05:10
Event String:
The Netlogon service could not create server share C:\Windows\SYSVOL\sysvol\cloudchowk.lab\SCRIPTS. The following error occurred:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:09:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:14:42
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:19:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
An error event occurred. EventID: 0x00000422
Time Generated: 01/18/2015 18:24:43
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\cloudchowk.lab\sysvol\cloudchowk.lab\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
......................... CC-DC03 failed test SystemLog
EVENT VIEWER LOGS
The DFS Replication service initialized SYSVOL at local path C:\Windows\SYSVOL\domain and is waiting to perform initial replication. The replicated folder will remain in the initial synchronization state until it has replicated with its partner CC-DC01.cloudchowk.lab. If the server was in the process of being promoted to a domain controller, the domain controller will not advertize and function as a domain controller until this issue is resolved. This can occur if the specified partner is also in the initial synchronization state, or if sharing violations are encountered on this server or the synchronization partner. If this event occurred during the migration of SYSVOL from File Replication service (FRS) to DFS Replication, changes will not replicate out until this issue is resolved. This can cause the SYSVOL folder on this server to become out of sync with other domain controllers.
Additional Information:
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 4689406D-D6D8-49E0-8079-2B1D4AE61BC6
Replication Group Name: Domain System Volume
Replication Group ID: 6B162096-2EFA-4D4C-BF13-62CC5B112B97
Member ID: 566943F9-D2FB-4304-823D-10DC972F831A
Read-Only: 0
Should I just start over again by removing DC03 and setting up another DC?
Regards
Sajat Jain -
Sysvol rebuild on a single domain controller
Hello there
Platform: Server 2008 R2 single Domain controller
A clients server above lost power with an unexpected shutdown over the week end and couldn't logon to the domain. However they can browse the network and open shares on the server. Connections to the Active directory failed and
DCDIAG reported failure to connect to the Global Catalogue server, along with other failures. The event logs show the following:
File Replication Service
Event ID 13561 Jrnl_wrap_error
Event ID 13566 declares FRS is scanning the volume but it cannot become a domain controller until finished... which it never does.
Directory Services
Event ID 1355 The Specified domain either does not exist or could not be contacted.
Finally running net share reveal that the SysVol is Netlogon shares are not available.
First of all I looked at the common JRNL fix of changing the of changing the DWORD Enable Journal Warp Automatic Restore to 1. But, it was already set to 1, when it should have been 0. So I am not sure what that means. I tried changing
it back with FRS service restarts but to no avail.
I have seen numerous entries about recovering the sysvol, but most involve pulling copies from other DC's, of which there are none. I do have a valid Windows backup with System state and Sysvol, which I feel I may be heading with this. So are there any other
paths I should be looking at, or is a restore from backup the only option?
Many thanks in advance
MIS5000Hello Ahmed and thanks for your reply
NSLookup returns correct values both ways for IP and FQDN
I also carried out some checks following your article. There were a couple of records pointing to the old server for last year which I have deleted. In the meantime I have pasted DCDIAG below for your thoughts I where I should be looking. There
is for example a returned test fail on a the time server at the foot of the report
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = Server-RDS
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SERVER-RDS
Starting test: Connectivity
......................... SERVER-RDS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SERVER-RDS
Starting test: Advertising
Fatal Error:DsGetDcName (SERVER-RDS) call failed, error 1355
The Locator could not find the server.
......................... SERVER-RDS failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SERVER-RDS passed test FrsEvent
Starting test: DFSREvent
......................... SERVER-RDS passed test DFSREvent
Starting test: SysVolCheck
......................... SERVER-RDS passed test SysVolCheck
Starting test: KccEvent
......................... SERVER-RDS passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SERVER-RDS passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SERVER-RDS passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=ppp,DC=com
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=ppp,DC=com
......................... SERVER-RDS failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SERVER-RDS\netlogon)
[SERVER-RDS] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SERVER-RDS failed test NetLogons
Starting test: ObjectsReplicated
......................... SERVER-RDS passed test ObjectsReplicated
Starting test: Replications
......................... SERVER-RDS passed test Replications
Starting test: RidManager
......................... SERVER-RDS passed test RidManager
Starting test: Services
......................... SERVER-RDS passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 18:49:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 18:54:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 18:59:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:04:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:09:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0xC0001B58
Time Generated: 02/23/2015 19:12:34
Event String:
The Diagnostic Service Host service failed to start due to the follo
wing error:
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:14:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00001695
Time Generated: 02/23/2015 19:16:19
Event String:
Dynamic registration or deletion of one or more DNS records associat
ed with DNS domain 'ppp.com.' failed. These records are used by other computers
to locate this server as a domain controller (if the specified domain is an Act
ive Directory domain) or as an LDAP server (if the specified domain is an applic
ation partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 02/23/2015 19:16:19
Event String:
Dynamic registration or deletion of one or more DNS records associat
ed with DNS domain 'ForestDnsZones.ppp.com.' failed. These records are used by
other computers to locate this server as a domain controller (if the specified d
omain is an Active Directory domain) or as an LDAP server (if the specified doma
in is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 02/23/2015 19:16:20
Event String:
Dynamic registration or deletion of one or more DNS records associat
ed with DNS domain 'DomainDnsZones.ppp.com.' failed. These records are used by
other computers to locate this server as a domain controller (if the specified d
omain is an Active Directory domain) or as an LDAP server (if the specified doma
in is an application partition).
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:19:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x0000000C
Time Generated: 02/23/2015 19:21:44
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:24:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:29:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:34:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00001695
Time Generated: 02/23/2015 19:37:48
Event String:
Dynamic registration or deletion of one or more DNS records associat
ed with DNS domain 'ppp.com.' failed. These records are used by other computers
to locate this server as a domain controller (if the specified domain is an Act
ive Directory domain) or as an LDAP server (if the specified domain is an applic
ation partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 02/23/2015 19:37:48
Event String:
Dynamic registration or deletion of one or more DNS records associat
ed with DNS domain 'ForestDnsZones.ppp.com.' failed. These records are used by
other computers to locate this server as a domain controller (if the specified d
omain is an Active Directory domain) or as an LDAP server (if the specified doma
in is an application partition).
A warning event occurred. EventID: 0x00001695
Time Generated: 02/23/2015 19:37:48
Event String:
Dynamic registration or deletion of one or more DNS records associat
ed with DNS domain 'DomainDnsZones.ppp.com.' failed. These records are used by
other computers to locate this server as a domain controller (if the specified d
omain is an Active Directory domain) or as an LDAP server (if the specified doma
in is an application partition).
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/23/2015 19:39:23
Event String:
Name resolution for the name crl.microsoft.com timed out after none
of the configured DNS servers responded.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:39:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0xC00038D6
Time Generated: 02/23/2015 19:41:54
Event String:
The DFS Namespace service could not initialize cross forest trust in
formation on this domain controller, but it will periodically retry the operatio
n. The return code is in the record data.
An error event occurred. EventID: 0x0000041E
Time Generated: 02/23/2015 19:44:31
Event String:
The processing of Group Policy failed. Windows could not obtain the
name of a domain controller. This could be caused by a name resolution failure.
Verify your Domain Name System (DNS) is configured and working correctly.
......................... SERVER-RDS failed test SystemLog
Starting test: VerifyReferences
......................... SERVER-RDS passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : ppp
Starting test: CheckSDRefDom
......................... ppp passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ppp passed test CrossRefValidation
Running enterprise tests on : ppp.com
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... ppp.com failed test LocatorCheck
Starting test: Intersite
......................... ppp.com passed test Intersite
Thanks Ahmed
MIS5000
Maybe you are looking for
-
SIZE OF FILE GOES LOWER WHEN I UPLOAD TO FLICK
AFTER EDITING MY PHOTO IN MY PROJECT FOLDER WITH BORDER FX, THAT IS ADDING A BORDER,COPYRIGHT LOGO,DATE AND MY NAME I CLICK DONE AND THE WORK IS THEN BACK IN THE PROJECT FOLDER.I THEN OPEN FLICKR AND UPLOAD THE PHOTO,ONLY WHEN I DO THE SIZE OF THE PH
-
how i want to know if my ipad 2 is original and not clone or fake ipad?
-
Problem with Hyperlink in JEditorPane!!
hi all! I have some problem. I create html page with hyperlink to myProgram.jar and when i open this html page in JEditorPane and click on hyperlink i have the some text but my program don't run. How write HyperlinkListener for run the my program and
-
How to push software update thru ARD
How can I push software update to the client macs thru the ARD? Please help.
-
Hi, I orderred a T520 from lenovo Ireland website but it's been 10 days the order status is still in process. It seems lenovo did not take any money from my credit card yet. Does that mean my order is still not processed? I wonder any of you had the