Sysvol was not shared\replicating after the DCpromo windows 2012 R2 datacenter
SYSVOL does not shared\replicating after the DCpromo windows 2012 R2 datacenter, and the partner DC is 2008 R2 Standard.
both the forest & domain level is Windows2008R2.
First glance they cannot communicate through RPC, you might need to review the firewalls configuration.
Some info on this topic:
Active Directory Replication Over Firewalls
Restricting AD Replication Traffic between DCs to only a few ports
Another option would be a site to site vpn
This post is provided AS IS with no warranties or guarantees, and confers no rights.
~~~
Questo post non fornisce garanzie e non conferisce diritti
Similar Messages
-
Scheduled job does not stop even after the scheduling window closes
We have written custom stats gathering job whose duration has been set as 14 hours in the schedule. This job starts daily at 6:00 PM and expected to complete upto 8:00 AM next day. But the problem is that this job continues to execute even after 14 hours. If we look at the dba_scheduler_job_run_details table, then its execution duration is about 16 - 19 hours daily. We could not understand as why it is not closed when scheduling window closes? Is there any problem with the scheduler configuration?
select job_name
,program_name
,schedule_name
,schedule_type
,stop_on_window_close
from dba_scheduler_jobs
where job_name = 'GATHER_STATS_STD_JOB';
Output:
JOB_NAME
PROGRAM_NAME
SCHEDULE_NAME
SCHEDULE_TYPE
STOP_ON_WINDOW_CLOSE
GATHER_STATS_STD_JOB
GATHER_STATS_STD_PROGRAM
GATHER_STATS_STD_SCHEDULE
NAMED
TRUE
SELECT window_name
,schedule_owner
,schedule_name
,schedule_type
,start_date
,repeat_interval
,end_date
,duration
,window_priority
,next_start_date
,last_start_date
,enabled
,active
FROM dba_scheduler_windows;
window_name
schedule_owner
schedule_name
schedule_type
start_date
repeat_interval
end_date
duration
window_priority
next_start_date
last_start_date
enabled
active
GATHER_STATS_STD_WINDOW
sys
GATHER_STATS_STD_SCHEDULE
named
+00 14:00:00.000000
high
23-feb-15 06.00.10.000000 pm +02:00
23-feb-15 06.00.10.095878 pm +02:00
TRUE
TRUE
We are using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod on Linux platform.
Message was edited by: MoazzamStraight out of the docs 83 DBMS_SCHEDULER
stop_on_window_close
This attribute only applies if the schedule of a job is a window or a window group. Setting this attribute to TRUE implies that the job should be stopped once the associated window is closed. The job is stopped using the stop_job procedure with force set to FALSE.
Having said that, stop_job with force applies to whether information about the job is gathered - you would have to test, but I believe that the statistics gather will be terminated in the middle of whatever it's doing.
Update: force says:
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOBwith force set to FALSE has failed. -
Windows backup not being seen after server failure windows 2012
Running Lenovo thinkserver with Raid 5 with 4 drives and Server 2012 Standard Had 2 drives go at the same time so had to reconfigure and reinstall everything, all data lost. It was under warranty so the tech came out and replaced 1 drive and am currently
waiting for the 2nd drive. So currently am running a 3 disk Raid 5. I used windows backup to create full backups and now when I try to restore from that backup, it just hangs and hangs and hangs and won't find the backups. THe backup is stored on Seagate Expansion+
3TB drive. I know there are some issues with these (which apparantly I didn't know) but I have to get this backup off and installed somehow, I can't handle resetting up the entire system. Please help, I am desperate!Hi,
By default we should restore BMR to the original device or a device with same hardware. Since you currently running a 3 disk Raid 5, you need to add another disk to the Raid 5 to restore BMR to a same hardware.
For more detailed information, please refer to the thread below:
How to: Bare Metal Restore of SBS2008 to different hardware with a different RAID controller?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/019a504e-c109-4d18-a85f-4f03944ada05/how-to-bare-metal-restore-of-sbs2008-to-different-hardware-with-a-different-raid-controller?forum=windowsbackup
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
-
After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe.
Already reinstalled 3 times and always says the same message.
thank youOnly two had virus on windows XP this week and wiped them with Avast. The itunes asked me to install the update, and so I did. but it always gives me that message.
-
iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?
Hi there skmonirul,
Welcome to Apple Support Communities.
From what I gather, iMessages are taking longer than expected to send on your iPhone 4s. If you aren’t seeing issues with other apps, try restarting your iPhone as shown here:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If the issue persists, try restoring your iPhone as shown in the article below.
Use iTunes to restore your iOS device to factory settings - Apple Support
So long,
-Jason -
Garageband was not able to install the new sounds
I'm on an iMac 21.5-inch (mid 2011) running Yosemite; 2.5 GHz Intel Core i5; 4GB memory.
A few months ago, I uninstalled GarageBand. Now I'm trying to reinstall it. I can get GarageBand 6 reinstalled, but I would like to get working with the latest version. I'm able to download the latest version from the App Store with no issue. It installs with no issue.
When I open it, it thanks for me downloading it, and then begins to download "an essential collection of sounds and loops." After a bit of downloading, it asks for my admin password; I enter it, and a few seconds later, it gives the error: "GarageBand was not able to install the new sounds. Close and re-open GarageBand to download and install them again." Closing and reopening GarageBand just takes me through the same loop (no pun intended). When the window is open, if I click on the GarageBand menu in the Apple bar, nothing happens.
It does not ask me to accept anything; I am signed into the App Store with the same Apple ID I have always used (it is the only one I have ever had, so that's not the issue). I am an admin on my Mac, so it's not a permissions issue. It's not a password issue either.
Things I have tried:
Rebooting into Safe Boot and opening from there; same issue.
Repaired permissions (it fixed oodles of things completely unrelated to GarageBand); same issue.
Creating a new admin profile and opening from there; it gives a different error, but the effect is the same.
Removed the program, trashed anything remotely related to GarageBand (preferences, folders, etc), emptied the trash, restarted the computer, reinstalled; same issue.
Installed GarageBand on top of itself, just in case; same issue.
I can't think of what else to try. Help!
For reference, here is a screenshot of what I'm getting stuck on:The solution Lijoesat posted above worked for me!
First I found the private/var/folders/ (and then lots of gibberish folders) and singled out two garageband files and deleted them. This did not work.
I then deleted everything which may or may not be a good thing, I am an idiot, I have no idea if these are extremely important files or not!
I tried to empty the trash bin after but many files was locked and Garageband would still not install.
I did a restart of the computer, emptied the bin successfully and tried to install Garageband again and it worked fine!
The inserted picture show some of the folder structure, I deleted everything after private/var/folders/ -
"Update was terminated" during VF01 after the invoice is save
I am experiencing an error of "Update was terminated" during VF01 after the invoice is save. The Update terminations are displayed in transaction SM13. When I check the error is in the 'RV_MESSAGE_UPDATE' with the error text 'BF00 075: No entry found for argument PL 0 0 in table T015Z'.
I did found a related OSS note "Note 423130 - Update terminatation when create billing document". I change the output dispatch time to '3' but I still encountering the error.
Could anyone know other possible solution?
Thanks in advance.I dont think this relates to output time but it relates to converting some amount into words.
Below the SAP explanation on Table T015Z
Table T015Z is used for converting amounts into words. The Unit field is
used for specifying the power of ten of a figure in the amount to be
converted, and the Figure field is used for specifying the digit in the
amount defined by the power of ten. The Number in words field is used
for specifying the corresponding word.
You use the function module SPELL_AMOUNT to convert an amount into
words. The function module can be tested with report RF_SPELL.
thanks
G. Lakshmipathi -
I was not able go to the main menu from whatsapp by pressing the center button so I hold on to the button for 2 seconds.Then the whole display turned out to be black & white. how can i fix it?
Hello monicaa003,
Thanks for participating in the Apple Support Communities.
If your iPhone display turned black and white after holding down the Home button for 2 seconds, first try pressing the Home button again to go to the main menu (Home screen.)
For reference, holding down the Home button for 2 seconds will trigger Siri if that feature is enabled:
About Siri - Apple Support
If pressing the Home button doesn't return you to the main menu, try restarting or resetting your iPhone:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Additionally, if Whatsapp is not responding or working as expected, see the troubleshooting steps at this link:
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best Regards,
Jeremy -
Hi
I have an ipod touch 4th Gen that everything was working perfectly. After the last update of iOs 5, the battery have charge 20 minutes. After the correction of the iOS 5.0.1 the battery have the same 20 minutes. What I can do? ThanksSame thing here. Try putting the brightness down all the way (its hard to see at first but you will get used to it) and one more thing is that close all you open apps. So to do that you have to click the home button twice (after you put your passcode in) and you will see some apps in the bottom. Hold it until there is a red - sign. click all of them so they go away. This does not delete your apps it just makes your ipod better.
-
Model Name: MacBook Pro
OS X Yosemite: 10.10.2
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 4 GB
I just purchased GarageBand 10.0.3 last week and I repeatedly keep getting the following message when I try to download ANY of the FREE Piano lessons in the "Lesson Store", "Garageband was not able to install the new sounds. Close and re-open Garageband to download and install them again." I have tried EVERY suggestion that I have come across on the internet and nothing is working! If I'd known I would encounter this issue, I would not have paid for this. Tried restarting, rebooting, reinstalling, deleting the cache, and on the verge of just reinstalling the OS. I have come across people have the same issue for months and I can't believe Apple has not offered a fix or update or anything.Immargarita, Since you just purchased the software you qualify for a no charge one on one at an Apple store. They never could tell me what was wrong, but after three visits and not one dime, all lessons downloaded at the store. I was not going home until it worked.
Hint, hint, I had just upgraded OX when the problem started. So... I qualified for tech support. I forgot to get my none working since the up grade Photoshop fixed. Some Java component can't be found and just like GB, the link to Apple for support does not work. I have the good old PS disc. I'm not happy with this cloud stuff.
When you call and give the SN for your computer, they may say it will cost $29.00 dollars for one time support. Instead choose a different prompt, tell the human being what your problem is and set up a visit to the Apple store. BTW, no one at the store seemed to have heard of this issue.
The techie just started the download and ran the activity monitor. The download stopped once. Then he continued it and everything is there now.
Shame on you Apple.
Hope this helps. -
Ipod 5 flash not working right after the update
Hi first off: my flash was perfect before the update so I think its not hardware?
- after the update yesterday today my friend and I tried to take a selfie in a dark place so we wanted to use the back camera and turned the flash as ON for our surprise it didnt work.
- we tried then to take something else's pic and the flash worked
- we tried the selfie again this time using the camera buttom not the volume's but didnt work.
- we used hipstamatic and VSCOCam then and it worked perfectly
- I tried turning on and off the device and did not work.
- I did a full restore through Itunes and didnt work.
anybody else having this problem?
any suggestion to fix it?I contacted apple and they claimed it to be an obvious software bug, they said I had to take it to an assistence to get a new one intantly but as theres no assistence in my town and I cant go to nearby one I will have to just replace the stock app for a better one... once more I'm disapointed with apple.
-
Supporting objects was not installed successfully from the APEX 3.2 to 4.1
Hi, gurus:
greetings! I have a question regarding migrating application from 3.2 to 4.1. I need to migrate an application in a APEX 3.2 workspace to a new workspace of APEX 4.1. I exported the application from the APEX 3.2 workspace and imported it again to workspace of APEX 4.1, everything works fine except supporting objects was not installed successfully, and the application cannot show images. Could anyone give me a hint to find the cause and solution?
Thanks a lot!
SamHi, Tony:
Nice to see you again! :) It proved out that was due to the wrong file format, I should choose UNIX file format to export my application from APEX 3.2 workspace instead of choosing DOS file format to export. Though I am still confused, Why this does matter? I used to export and import with random file type, as long as I keep consistency of file type for export and import, it never give me trouble like this.
I got the following error message
The following prerequisite checks failed. Installation of this application's supporting objects cannot continue until these issues are resolved.
To continue installation after addressing the errors, navigate to the Supporting Object Definitions of this application and click INSTALL in the Supporting Objects Installation section.
Alternatively, you can deinstall the application definition and reinstall after resolving these issues.
Object Names: EBA_CUST_ACTIVITY_TYPES, EBA_CUST_ADMINISTRATORS, EBA_CUST_ASSOCIATIONS, EBA_CUST_CATEGORIES, EBA_CUST_CONTACTS, EBA_CUST_CONTACT_TYPES, EBA_CUST_CUSTOMERS, EBA_CUST_CUST_ACTIVITY, EBA_CUST_LINKS, EBA_CUST_STATUS, EBA_CUST_VIEWS_LOG, EBA_CUST
Sam
Edited by: lxiscas on Dec 11, 2012 7:06 AM -
Help needed: "Logic was not able to complete the download"
I purchased Logic Pro 9 today from App store. Downloaded and installed the software. After installation & startup Logic started to download 2GB of additional content. This download was interrupted by the message "logic was not able to complete the download". I trashed Logic, redownloaded and reinstalled it several times from App store, always gives same message after startup. Doesn't even start to download basic content again, just gives the message. After hitting "ok" Logic just quits. This is extremely frustrating and I have no idea what to do about this.
I would very much appreciate any advice about how to solve this problem!I start with the same problem but it ends differently.
I purchased Logic Pro 9 today from App store. Downloaded and installed the software. After installation & startup Logic started to download
the basic content. Upon startup the program already seemed weird, but it started and finished the basic content.
By weird I mean all I get on my screen is the Logic menu bar and the text is yellow instead of black. To top it all up, the text from the menus is missing and all I get is empty boxes.
I have deleted it and reinstalled from the app store to ensure a new clean installation but still the problem persists.
I have checked all your above points as well and none seem to work would be grateful for any help.
Cheers -
Since I updated to firefox 3.6 I keep gettin multiple pop up windows. This did not happen until after the update. The pop ups appear as regular windows so pop up blockers can not stop them. Why has the new update made my laptop more vulnerable. updates are supposed to be improvements!
== This happened ==
Every time Firefox opened
== as soon as I updated to ver 3.6Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged.
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.
Maybe you are looking for
-
Any time I click on a link within a page, such as the "home" link in Facebook, or the various links on the Mozilla page that I needed to follow to get to this screen, Firefox opens a new tab instead of redirecting using the tab I'm on. Also, Firefox
-
I have two google email accounts - one is personal, the other professional. I like them being separate. Until a few days ago, my ipad could pull up either account I needed at the time. Now, though, when I try to pull up either account after signing i
-
This is my first post on the forum, and I'm reasonably new to using an iPod-iTouch. I have an iTouch 4th Gen 64G Running on an old PC (3.4Ghz P4, 768M ram) using iTunes 10.6.x (version before exisiting 10.7). 1 I had a problem when my iTouch was runn
-
Windows 7 Clean install onto newly purchased SSD
Here is my configuration, purchased last November: 2764CT CONFIGURED SYSTEM 44C6206 SBB I.CR2DUO PR P8700(2.53GHZ 45M3453 VBB G.WIN.7PROF.W/XPDOWNGR. 45M3816 SBB GWXPP(PR.VIA DWRGW7P)US EN 42X6315 SBB ATIMOBILTYRADEON3470 256MB 42X6308 VBB 3GBPC3-850
-
Error while trying to view the details table from Show/Hide icon
What we are having is two tables, Outer and Inner, having Outer VO and Inner VO,outer VO is linked with inner VO. Now when I am trying to view the inner table through Show/Hide icon to see the details of the table ,I am getting an error like ... The