T 40 Yellow DC-in block on the system board part number

The DC conncector mounted on the system brd where the AC Adapter connects to the laptop. Does anybody know the part number for that. It is a failure I see in many of the t40 series laptop but I have not been able to locate a part number. It does not come with the system board.

Hi SRJack
Please find the link given below for your unit and the Manual and complete part number inside your unit might help you to fix your issue check page number 3-5.
Maintenance and Service Guide
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

Where do I find the mother board part number of my notebook Pavillon dv9379ea?

How can I find the part number of the mother board of my notebook Pavillon series dv9000, model dv9379ea?

HI,
fabioweb wrote:
How can I find the part number of the mother board of my notebook Pavillon series dv9000, model dv9379ea?
Download and run CPU-z. Go to the Mainboard tab.
There is another identifier for your notebook. Look on the barcoded sticker on the bottom of your notebook. Please post number 2.
For part number GH839EAR the system board (motherboard) is HP p/n: 434660-001
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Is the graphic board part of logic board on a MacBook pro

Is the graphic board part of logic board on a MacBook pro

Yes, the GPUs in all Apple notebooks are soldered to the logic boards. They can't be replaced, upgraded or modified.

Is is the BIOS or the system board?

Hi. I have a pc manufactued by a deceased company named Quantex. The pc has a MSI MS-6199VA
system board with W6199VAFD v3.3 121799 Bios, an Intel P6C (Coppermine) Pentium III 733Mhz
processor and a VIA Apollo Pro 133 chipset.
I have been having some trouble with the pc over the last month. It has an nVidia GeForce 256 video
card and around the middle of October I updated my install of Norton SystemWorks from NSW 2002 to
NSW 2003 as well as updating the nVidia drivers to the latest version (40.72). Things have not been the
same since. I started getting random system freezes and 0D or 0E Fata Exceptions as Windows 98SE
was starting to initialize and display the desktop and Windows signon. I was always able to restart in
Safe Mode, but not always able to get around the Fatal Exception in normal mode.
Over the course of the next month, the pc never really attained stability. Sometimes it ran fine for a while,
then would just freeze. I started backing up more often and got PowerQuest Drive Image for disaster
recovery purposes. I already had a tape drive, but sometimes the tape backup software would
freeze/stop functioning in the middle of a backup.
I then got a larger hard drive, so that I do Drive Image backups to HDD rather than CD-RW. I got an
ATA-100 80 Gb drive but did not yet install it.
This past week I checked your website to see if I could find any additional information about my BIOS
and if it would support the new hard drive. I saw that I was on v3.3 and that you have v3.5. It also
appeared to me that v3.5 was needed for the new drive. It also seemed to me that my issues could be
hardware (ie, system board) related.
Anyway, I used your v3.5 BIOS update utility to backup my existing BIOS. Double checked my system
board and chipset and then tried the v3.5 update. The flash update did not write completely (out of the
two full rows of white progress boxes around 6 of them were blue). I restored the original bios and
regained some function. However, I can no longer even get through the CMOS setup without the pc
freezing.
I have reseated all cards and the processor as well as trying only one memory chip at a time. Nothing
has changed the behavior. I even reflashed the v3.5 BIOS, this time with a clean update (all white
progress boxes). Still no stability.
I am just looking for some advice. It my system board gone? Was it going or did I destroy it with the bios
update? Since my original equipment manufacter is no longer in business I have nowhere to go for
hardware support. Is it possible to find a replacement system board or better to cut my losses and get a
new pc. I am fairly pc competent but not to the point where I would swap out a system board on my own.
Vic

On Friday I decided to take everything apart; including removing the system board and then put it all back together. Believe it or not, without any repairs since I last replied in this forum, my pc is now somewhat revived. It appears as though my problem might have been that the processor was not completely seated in the slot. Does that make sense? The freezing during CMOS setup or OS startup has completely disappeared.
There are still some stability problems and there also appears to be a BIOS issue.
I think the stability problems are from corrupt OS files (Win98 SE) and I am thinking the only recovery for that is to reinstall. Nothing like a perfect opportunity to move this hardware to Windows 2000.
Now for the BIOS question. This board is an MS-6199VA. The BIOS is W6199VMS v3.5 100200 with BIOS ID of 01/01/2000-692-596-W977-2A6LGM4BC-00. At the tail end of the BIOS startup I get the following..
CMOS Checksum error - Defaults loaded.
Warning! CPU has been changed.
Please re-enter CPU settings in the CMOS setup and remember to save before quit.
Press F1 to continue or DEL to enter CMOS setup
I have gone through all the CMOS setup options, set them, changed some; like disabling a serial port and setting up a power on password, and save them. Yet I still get this message every time.
Other than halting the startup until I press F1 or DEL there seems to be no other negatives. Am I missing something or is there a storm coming?
Vic

"Product info programmed into the system board is missing or invalid system board:

Product info programmed into the system board is missing or invalid system board:
OOA product name,
OOA serial #,
OOA product #,
OOA system board ct#
I get this message every time I start up suddenly. What does it mean and how do I fix It? I just bought this laptop from Staples about 4 months ago!!!
This question was solved.
View Solution.

It is very important that you post the product name or product number of your notebook and the version of the installed BIOS here in your thread.
How to identify your notebook.
Remove the battery and look in the compartment where the battery was installed. You should see a printed part number and a product name. Please post one or both of them (with all alphanumeric characters here).
It also helps if you post the country of purchase
I will pass that information to an internal HP contact as soon as you post it to see if we can get that resolved for you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Connecting power cables on the system board of a HP wx 4400

Hi, sorry for my english but i understand better than write and speak.
So i don't know how to reconnect the differents power cables on the system board .
If you could show me by a plan the reconnecting of theses cables : -Reset sw
-Pwsw
-Pw Led-
-Pw Led+
-Hd Led
I get no speaker cable , all of the pins on mother board are black.
Thanks a lot in advance for your answer.

Hi, sorry for my english but i understand better than write and speak.
So i don't know how to reconnect the differents power cables on the system board .
If you could show me by a plan the reconnecting of theses cables : -Reset sw
-Pwsw
-Pw Led-
-Pw Led+
-Hd Led
I get no speaker cable , all of the pins on mother board are black.
Thanks a lot in advance for your answer.

Yellow Lights for Assets, But the System Seems Idle

Have a HD (16:9) project finished except the video assets for buttons all have yellow lights. Opened Activity Monitor and it seems to confirm that the system is at rest, but two tasks are red and unresponsive.
DSPX_AENCODER (NOT RESPONSIVE)
DSPX_ENCODER (NOT RESPONSIVE)
It is a dual-quad MacPro with 12GBytes of RAM. Nothing is running except DVD-SP and Activity Monitor. Cores are all at rest except for occasional one-bar of activity. 1.3GByte of RAM is total used with 10.7GB free. Disk indicates 4-5 I/Os per second with 0 date read and/or written.
I have killed the tasks, restarted the program, and re-booted the system multiple times. DVDSP starts each time with the same two tasks unresponsive.
The main asset, which is the main HD video was compressed using compressor prior to importing into DVDSP. I noticed that while compressing, Activity Monitor told me that the task TRANSCODER was NOT RESPONDING, but the video compression was successful.
Is Activity Monitor trustworthy with Compressor tasks?
Thanks in advance folks. These boards save my life over, and over! Over.

Anton,
Thanks for your help. That seemed to be the case. The build command caused the yellow assets to complete. However both encoders stayed red in the activity monitor and said they were "not responding," all the time.
Where are the settings for transcoding?
I burned the DVD, and received the message that the burn was successful, but my player connected to the TV would not recognize it. DVD player on the mac will play it, but it hesitates occasionally.
I guess more experimentation is in order.

How can you brand a serial number onto the system board?

I just replaced a system board and need to brand it with the appropriate serial number. How do I accomplish that? I have software to run when I do that with Dells or Lenovos. How can I do it with an HP?

Hi:
You cannot tattoo a HP notebook. It has to be done by an authorized HP tech service center where they have a DMI tool for that which is not available to the public.
You can tattoo some HP business desktops with this software, link below. It might work on HP consumer desktops but I don't know since I have never tried it on one.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...
This program makes a bootable floppy disk, and cannot be installed via any other method than a FDD or USB FDD.
It works on many other HP business desktops other than those listed. It has been used successfully in PC's up to a couple years old.
Paul

Satellite Pro M70 - What is the Bluetooth module part number

Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?
You can reed it from one of the labels under your notebook. You can read bluetooth in it, the part number is in the up left side of the label, and it will be something like this: PA3418U-BTM.
Thanks.

Hi
Why you dont make a call to the authorized service partner in your country and would order an compatible BT module for your notebook?
In my opinion this would be the easiest way to get one.
Unfortunately Im not owner of Sat Pro M70 and therefore I dont know the BT part number. But my A210 has been equipped with an internal BT module and the part number is PA3608U-1BTM
Greets

What is the proper AppleCare part number...

...for the original 11" MBA?
I have the option to purchase 2 different part numbers that are both for MB, MBA and 13" MBP. One is less expensive than the other. I can't seem to find any part number beyond the current one sold in the Apple Store. The part number in question is MC246LL/B. Anyone?

Hi:
I can't find any specs on your notebook to pinpoint the motherboard you need.
Below is the link to the service manual for your notebook series.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
See chapter 3, pages 22 and 23.
If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
Paul

What is the motherboard part number for hp dv6-3037tx?

I have a bricked laptop and would like to buy a replacement motherboard
What is the motherboard part number for hp dv6-3037tx notebook PC?
Laptop product number is WY285PA.
And also, will the replacement motherboard be identical to the old one (i.e. same GPU). I don't want to get a new motherboard with a crappy GPU, my old one was great.
Thanks

Hi:
I can't find any specs on your notebook to pinpoint the motherboard you need.
Below is the link to the service manual for your notebook series.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
See chapter 3, pages 22 and 23.
If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
Paul

What is the Replacement Product Part Number of the SFP MGBSX1 that I can use?

I did a BOM using ESW-520-48-K9 with SFP MGBSX1 (I need 1000BaseSX).
But the configuartion tool said that Unit Price Column: "EOL" indicates item is end of life; N/A indicates item not available in current pricelist

We still sell the MGBSX1 as a refurbished item. You can order part number MGBSX1-RF in Cisco Commerce Workspace.
MGBSX1-RF (Gigabit Ethernet SX Mini-GBIC SFP Transceiver REFURBISHED) - USD 95.00
Best regards,
"Nilz"
Nilo Noguera
.:|:.:|:. Specialist, Cisco Global Virtual Engineering - Cisco Partner Help
http://www.cisco.com/web/partners/tools/ph.html

CS6 which I own and have used for years won't open. Blocked because the system thinks I am a CC user and my trial period has expired

I own the suit of Adobe Programs which I have been using for years. They are paid for and registered and I have serial numbers.
Today, I cannot open the programs. The message is: Design and Web Premium Trial. Expired. I do not want to use CC. I tried it for a day quite a while ago and decided just to buy the programs.
What can I do?
How to get back to my paid programs?
https://www.adobe.com/account/my-products-services.html
Design and Web Prem
CS6
Mac
May 25, 2012
https://www.adobe.com/account/my-products-services.html
Lightroom
5
Mul
Sep 1, 2014

If you see a trial screen, click on "license this software". I forget if you have to sign in with your Adobe ID/password before or after, but it will give you a serial number option. That is you would see a button, "I have a serial number" or a screen where you input your serial number.
Once accepted, your software will go back to its' licensed state.
Also if you still have problems be sure you are still not on any 30 day Cloud plan that you must cancel. Uninstalling CC may not be enough.
Contact Customer Care to cancel your trial or plan.
Gene

I PURHASE ADOBE ACROBAT XI PRO 2 years ago now i want to use it . i enter the purchase code . the system show wrong number . i dont remerber wich store i purchsed it. how i can the serial number to have it working

can you help me on that
thank you
Sam

if you have the serial number, dl the installation files and install:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Must I open the system to setup number range buffering ?

Hello community,
Number range buffering is disabled for DIM IDs on most of our InfoCubes, but we would like to experiment with turning it on according to the recommendations in this SDN blog :
/people/vikash.agrawal/blog/2006/04/05/load-lots-of-data-147faster148-with-buffering-number-range
I have imported a test cube into the production system and would like to test load the same quantity of data that is normally loaded into our production cubes.
But the problem when turning on Number Range Buffering for the test cube is that the production has status 'not modifiable'
Is it necessary to open the production system for modifications each time you want to make a change to the number range buffering settings ?
If so, then this will be difficult because we transport new cubes very frequently in order to separate the data by time period.
Is there a way to change the number range buffering settings via transport, or other customization without opening the production system for modifications ?

NRIV is the table that has the number range buffering info it.
http://help.sap.com/saphelp_nw04/helpdata/EN/7b/6eb2aa7aed44ea92ebb969e03081fb/frameset.htm
There appear to be a couple related tables.
Table Name      Short text
NRIV            Number Range Intervals
NRIVSHADOW      Local NRIV for multiprocessor machines
NRIV_LOKAL      Local NRIV for multiprocessor machines
NRIV_RESTE      Internal numbers not assigned in conn. wit
According to the doc on one of the linked help pages, you may want to look at Tran SM56. It says it will tell you how often a load had to wait because it had to wait to get the next available number. You might find that you are not waiting in any of your loads, in which case, this effort won't bear any fruit.
Personally, absent a specific set of instructions from SAP that indicate that yes you can transport this stuff and how to do it, I don't think I would pursue it.
Not to be negtive about this idea, but from what I have seen, the nbr range buffer objects don't share the same BID####### across systems. This seems like it would be a very large obstacle to overcome. I think will end up throwing lots of hours down a rat hole trying to do this.
But, who knows, if you get it to work, you ought to blog about it.
Good luck.

T 40 Yellow DC-in block on the system board part number

Similar Messages

Maybe you are looking for