T-500 running Windows Vista - Error trying to install Service Pack 2

I just spent my entire Saturday trying unsuccessfully to install SP2 for Windows Vista on my T-500.  My laptop has Vista Home Premium as the OS and is fully patched with SP1.
The message I get is "Error_not_found (0x80070490)"  when I try to install SP2
I ran SFC /Scannow and got a message that there are corrupt components and a direction to C:\Windows\Logs\CBS that has a huge file I cannot comprehend. 
I also ran the "System Update Readiness Tool" prior to trying to install SP2 with no apparent effect.
I have tried various approaches to this such as running System Restore and reapplying everything  with reboots in-between.
I confirmed no spyware and also disabled my antivirus program (NOD) during updates with no effect.  
Has anyone else out there had a similar problem who might be able to offer advice?
Thanks,
The Hoy

Are you sure you have the proper file downloaded for your system? x86 if you are running 32bit Vista and x64 if 64bit. 
Other than that, you might try to use Windows Update. Note that you need to install all updates, possibly including IE8 before Windows Update will offer you SP2.
You might also try installing all updates from Windows Update and then running your stand alone SP2 installer, to see if that solves the problem.

Similar Messages

  • Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2?

    Is Firefox 4.0 now compatible with ZoneAlarm Browser 1.5.260.0 and Windows Vista Home Premium, 64Bit System, Service Pack 2? Earlier when checking for updates there were compatibility issues. Were these issues resolved to allow me secure operation with Firefox 4.0?

    I also am a zone alarm user and was not to happy about the issue with 4.0
    I use sky .fm for music and was not happy when it would not play. required update to latest flash,which didn't work no matter what. even the suggestion in another thread.

  • Trying to install Service Pack 1 from updates

    I decided to restore my home computer to the Factory Setting Configurtion. Now when I try to install the Vista Service Pack 1,
    it dose not install but it says it did install correctly after it was down loaded. My history says it installed 5 times now but
    it has not. I am trying to update Internet Explorer 7 to 9 or higher but I can't get past installing Service Pack 1 which will
    not install.I try installing service pack 2 which will not install becauce service pack 1 is not installed. This is a brand new
    installation of Vista Home Pre. from Factory Settings Disk 2007. I have install all updates I can install. Then I also look at
    Windows updates in my computer and it is not there, thow it shows in History Updates.Please Help MCSE Richard Sedore
    Thank You.

    For Macs with built-in Optical drives, you will need to burn the ISO to Optical media and use the Optical drive.

  • Errors when trying to install Service Pack 3 for Exchange 2010

    I have 2 Exchange 2010 servers that are running SP2 and I am trying to install SP3 on both.
    They are installed in a DAG and so I am running the .\StartDAGserverMaintenance.ps1 script before attempting to install SP3.  When attempting to run the SP3 setup I get the following errors:
    Setup cannot continue with the upgrade because the 'powershell' (Machine: P-E10-2.company.com) process (ID: 5296) has open files. Close the process and restart Setup.
    AND
    Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
    I can download the hotfix and apply it but has anyone had any issues with this particular hotfix?  Does anyone have any ideas about the powershell error?
    thanks for your help.

    Hi,
    That hotfix relates to a known issue implementing DAG's across data centres (an issue particularly with Windows failover clustering). As a best practice is should always be installed. Please review the following article, which describes why it should be
    installed:
    http://blogs.technet.com/b/exchange/archive/2011/11/20/recommended-windows-hotfix-for-database-availability-groups-running-windows-server-2008-r2.aspx
    In regards to the open files, as the other poster suggested, there will be another user logged onto the server who has a powershell window open. Ensure all other users are logged off the server before performing the upgrade.
    Best Regards

  • Trying to install service pack 2 for WLS 6.0

    Hi !
    I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
    2.2.14-6.1.1smp on an i686
    When I try to install the service pack 2 this happens:
    ===============================================================================
    Choose BEA Home Directory
    1- /home/bea/wlserver6.0
    Existing BEA Home: 1
    ===============================================================================
    WebLogic Server 6.0 not found
    WebLogic Server Service Pack 2 Installation failed.
    You do not seem to have WebLogic Server 6.0
    installed for BEAHOME /home/bea/wlserver6.0.
    What is happening?
    Thanks in advance
    Sergio Ríos

    Daryl,
    That is really strange...i just tried downloading from the same link and it is working fine for me.
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
    -Anil

  • Trying to instal Service Pack 2 under WLS 6.0

    Below you can find my original message posted five days ago.
    Just as comment: I don't have a beta version. It is <release level="6.0" Status="installed".
    Any help?
    Thanks
    Sergio Ríos
    PS: please don't erase !!!
    Hi !
    I already have WLS installed and running under a Red Hat Linux release 6.2 (Zoot)Kernel
    2.2.14-6.1.1smp on an i686
    When I try to install the service pack 2 this happens: ===============================================================================
    Choose BEA Home Directory -------------------------
    1- /home/bea/wlserver6.0
    Existing BEA Home: 1
    ===============================================================================
    WebLogic Server 6.0 not found -----------------------------
    WebLogic Server Service Pack 2 Installation failed. You do not seem to have WebLogic
    Server 6.0 installed for BEAHOME /home/bea/wlserver6.0.
    What is happening?
    Thanks in advance Sergio Ríos

    Hi.
    You can get individual service packs by logging into your esupport
    account at http://support.bea.com. Alternatively you can download
    WLS6.0 with service pack 2 from
    http://commerce.bea.com/downloads/weblogic_server.jsp.
    Regards,
    Michael
    Alexandre Portella wrote:
    Hi,
    From where can I download the sp2 for WLS 6.0 on Solaris?--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Windows vista Error code when installing on my mac

    Okay so i'm doing everything exactly as i know to be right, and i'm getting this error message Error: 0x8007045D when it starts copying files, during the installation, is there something wrong with my friends DVD drive or something, cause i've already installed it on my mac perfectly fine, first try..... Help would be greatly appreciated.... thank you in advanced

    JimHess provides the answer that worked!
    "The easiest way is to simply download the trial version of Lightroom 4.4 and install it. On the initial screen that displays when you start Lightroom (after you have installed it) has an option where you can indicate that you have a serial number. Choose that option, enter your serial number, and you are good to go."

  • HP Pavillion Windows Vista a6212n 32-bit with Service Pack 2 hangs up on startup.

    Big ongoing problem. Comp. has crashed many times. First startup boot is the normal Welcome Windows Home Premium screen, then blank. Second reboots as Welcome Windows Home Premium screen, goes blank and takes forever to load desktop. I’ve performed a complete System Test using PC Doctor. All tests have passed. I’ve performed many System Restores. Not helpful, the issue still persists.
    I’d appreciate any helpful input to resolve this issue.
    Thanks,
    Sherry

    Hi Sherry,
    Have you made any hardware changes to your PC?
    Usually at the windows screen is when the video driver using a higher resolution is loaded. 
    Did you run a complete hard drive surface analysis scan?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Problem installing Service pack 1 for Windows Vista 32-bit from windows update

    I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

    Hi:
    Try downloading and installing the standalone SP1 file.
    http://www.microsoft.com/en-us/download/details.aspx?id=30
    If you get it to install that way, go straight to SP2 with the standalone download.
    http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
    Paul

  • Crystal Reports 2008 Error Installing Service Pack 1

    Hello,
    I am trying to install Service Pack 1 for Crystal Reports 2008 on Windows 2008 Server as an adminstrator and I get the following error message:
    "The feature you are trying to use is on a network resource that is unavailable.  Click OK to try again, or enter an alternate path to a fold containing the installation package "CrystalReports.msi" in the box below."
    Also, I have been unable to complete the registration wizard because I do not get a 10-digit registration number when I complete the registration process at www.sap.com/solutions/sap-crystal-solutions/productregistration .  I don't know if this problem might be causing the Service Pack 1 to not install.
    Thanks,
    Michele

    Hi Michele,
    Windows 2008 is not officially supported yet but it is for Vista and Windows 7 after SP 2.
    To get it to work uninstall first, make sure you keep your keycode and then download SP 3 full build:
    https://smpdl.sap-ag.de/~sapidp/012002523100009989492010E/cr2008_sp3_fullbuild.zip
    Then it should work.
    Thank you
    Don

  • TS1436 I keep getting unknown error occured(4450) when trying to burn a CD...running Windows Vista, any help would be appreciated

    I keep getting unknown error occured(4450) when trying to burn a CD, running Windows Vista...any help would be apprciated.

    I had this issue to when trying to burn discs recently. I went into the CD creation settings in iTunes and I "unchecked" the option to "Include CD Text" and after I did that, the disc I had been trying to burn several times with error, actually burned without fail. Give that a try and see what happens.

  • Can't install quicktime or itunes I recieve error code 2738.  I'm running windows Vista 32 with Service Pack 2.  I have tried old and new version of both programs.  Also, have gone through Apple's online help with no good outcome

    Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads.  I'm running Window Vista with Service Pack 2.  I have check for all window update.  I have gone through Apple itune help list.  Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
    Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

    Excellent news!
    Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
    Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
    https://discussions.apple.com/community/ipod

  • I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C  Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime librar

    I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C  Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
    2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
    I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
    Can anyone help me? Thank you. EFS1

    Hello DrJMDDC,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    1. Remove iTunes and related components from the Control Panel
    2. Verify iTunes and related components are completely uninstalled
    3. Reinstall iTunes and related components
    Best of luck,
    Mario

  • I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

    I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

    What is the exact error message?

  • TS1717 On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

    On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99442)

Maybe you are looking for

  • Problem passing a XML parameter

    Mrs, I need to pass a XML parameter from an OAF page to an external page. Below there is a piece of code where I did it at first (through parameters - GET). The problem: the XML has a variable length, so it can be bigger than GET limits. How could I

  • DSP filter problem in modifying the Oscilloscope

    The hardware and software I am using are: LabVIEW: 5.1.1 DAQ device: PCI-MIO-16XE-50 VI programs: 2 Channel Oscilloscope(sample VI) I want to modify the function of the sample VI of 2 Channel Oscilloscope to simulate the AC-GND-DC function of Real Os

  • Can we have Timesheet widget?

    Hi All, I am from Portal. I have worked on ESS business package. Timesheet, used to book time, forms a main part of ESS package. It is an IAC (Internet Application Component) hosted on ITS (Internet Transaction Server). In Portal created iview for th

  • Photoshop Elements 7 saving large files issue

    I use Photoshop Elements 7, I recently bought a new camera (24 megapixels). PSE7 is not happy, I am having lots of issues saving my work. Is anyone else having these issues?

  • NetBeans to Eclipse error

    Hi. I've some problem taking the source files from NetBeans to Eclipse. I want to build a GUI in NetBeans and do the coding in Eclipse. When I transferred the source files to Eclipse the following error message *'org.jdesktop cannot be resolved to a