T-code : CRMC_R3_ORG_GENERATE, How can I link to the target system??

Hi, everyone.
First of all, Thanks for your reading my message with my heart.
We are facing the critical problem.
We want to download the customer master in R3 system to CRM(BBP600), but the problem is that there is no SALES AREA DATA!! (we need the sales office value for some reason.)
Basically, CRM is linked to R/3(domestic system) and the customer data we want to download is in another R/3(Foreign GmbH system)
we thought that the reason is there's no DIST,Channel and Division in PPOMA_CRM.
so, we excuted the transaction, CRMC_R3_ORG_GENERATE to download the sales area organization,
but the system we saw was not that we hope to link.
How can we set the destination we hope to link for T-code CRMC_R3_ORG_GENERATE ?!?!
If somebody know the procedure to connect to R/3(Foreign GmbH system), Please help us
I really appreciate your help in advance.
Thanks
Best rgds,
Hyo-ki

Thank you for your reply.
Before reading your advice, We delete all site ID and created new site ID for Foreign GmbH.
after that, now we can connect to that system, and we can see the list of R3 sales area data.
But, when we excuted the 'Creation' button, the system showed us red alert status in the bottom list screen of .CRMC_R3_ORG_GENERATE. T_T
We already have the dist.channel code list and division code list for R3(domestic) in CRM,
and another R3(Foreign) has the same codes list for Dist.channel and division.
for example,
R3(domestic) has customer code - 200341, and its sales area is 1000 / 20 / 10, and
R3(Foreign) has the same customer code - 345201, and its sales area is 4100 / 20 / 10.
so, I think the same codes of dis.channel and division causes that system showed red alert.
am I correct??
then, Is there any good strategy to maintain Customer master data (or any master data) in TWO R/3 systems with only one CRM
using each dist.channel and division(the same code) ?

Similar Messages

  • I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

    I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

    If you bought Lion from the App Store, you can't legally or practically transfer it, because it's tied to your Apple ID. Reinstall the original software from the discs that came with the machine.

  • I've had this iPad computer thing for a few months now. I used to just put in my password when I downloaded an app or such like. Now it wants me to set up 4 further questions and answers "for added security". How can I return to the old system?

    I've had this iPad thing for a few months. It used to just ask me for my password, but now it is demanding I set up four questions and answers for
    "added security". I don't want to do that, I just want to carry on as I was but the machine is preventing any app downloads etc.
    Seems the stupid machine is in control.
    How do I get it to listen when I threaten it with a good thrashing and a one way trip to the garbage unless it does what I say?
    Thanks

    Chick3597 wrote:
    Regardless of apple updating something or another. I have no need for the additional questions and really don't want to allow them to bully me into compliance.
    You may have no need for additional but Apple does. They don't want your iTunes account to be hacked and then go complaining to them that their security procedures are not up to standards.
    Chick3597 wrote:
    So how can I continue in the good old fashioned way?
    Its really absurd to even ask this in light of the information that you have been given already. The "old fashioned" way is gone. It's Apple's store, Apples's rules and IMO - its a wise decision on Apple's part.
    You do not have to comply at all, but you will not be able to purchase from iTunes anymore, but nobody is going to force you to do something that you do not want to do.

  • How can I link two separate Messenger systems?

    From what I have read, the only way to message users from other Messenger systems is to use the Pidgin client which would require a second logon to the other Messenger system.
    Can Messenger systems from two separate Groupwise systems be linked at the server level?
    - Gordon

    Hi,
    Here's the link to all the documentation: https://www.novell.com/documentation...l_messenger22/
    The installation guide (page 16, I think) explains the authentication requirements.
    Cheers,

  • How can I get back the default system files icons to my fles?

    Hello,
    After installing an application like FontExplorer, all my fonts got it's icon.
    I went to a font, selected and did get info, I tried to delete the icon but could not.
    I know the default icons for OTF fonts and an italic O, half green, half black.
    How can I get those Icons back,
    Or in general,
    When files gets an application icons, how can I restore the default icons for files?
    Thank you
    Shlomit

    Icons in the Get Info pane can be changed back to the original icon by clicking on the icon once, to highlight it, and then pressing Control X (for cut).
    But in your case the font icon is probably more due to the association with the application selected to open it with, ie FontExplorer. So with the Get Info pane open for a selected font type you need to change which application you use to open it with. For example, if you select one of the OTF fonts and do a Get Info, in the Open With pane it will show FontExplorer. Change this to Font Book and it should change its default icon.

  • How can ID automatically change the business system while importing?

    Hi gurus,
    There are many scenarios in our PI system. It will be a tedious work if we don't use transport system(CTS+).
    You know we have to create the scenarios manually in Integration Directory since the business system is different.
    The question is as below (BTW:We are using local SLD for dev,qas,prd separately):
    If we don't use transport system, and only use export and import functionality, and create business system group, can we make the ID automatically change the name of business system while importing?

    Hi Xinjiang,
    You can follow below method.
    In Quality system transport targets will be DEV(Dev pi system) ---> QEA(Quality PI system)
    In Production system transport targets will be DEV(Dev pi system) ---> PEA(Production PI system)
    This will ensure that you does not need to create separate request in Quality system. You can use the same request created in Dev to transport to production system. This will reduce your efforts of transportation. This is the same type of approach that is followed in ECC system as well or next solution is creating transport target in each sld system as you mentioned below,
    we have three local SLD, so we need to create TS and BS for PI DEV in SLD QAS, and create TS and BS for PI QAS in SLD PRD,
    Following link will help you for defining transport target.
    http://help.sap.com/saphelp_nwpi71/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm

  • How can i re-install the operating system without deleting my files on the computer

    I'm Trying to re-install the operating system on my macbook, and i dont know, if i can only re-install the OS without deleting the Data on the computer.

    If the Snow Leopard version on your Snow Leopard DVD is lower than the Snow Leopard version on your computer, you will NOT in any case be able to re-install the OS the way you want it. You will only be able to erase your disk and then reinstall the OS.
    It will only "upgrade" and keep your files if the Mac OS X version of your Snow Leopard DVD is newer than the Snow Leopard version on your computer.

  • How can I back up the whole system?

    I want to try re-install the whole system because some software do not work properly, especially gcc-software but I really need it for my work and I don't know what to do, I tried everything and I think that the only one solution is to be like a Windows-users and to re-install the whole system. But I would like to have an opportunity to get back my system in case of it will not work.
    Can I use something to back up my system?

    Use a program such as the Disk Utility, Carbon Copy Cloner, or SuperDuper to create a clone on an external drive.
    (91805)

  • I dont want to sync my desktop with my iPad. How can I NOT sync the two systems?

    I want to use Firefox on my iPad, but DO NOT want it sync with my desk top. I.E., I want to use it as a stand alone app! Can this be done?

    Is the Android version also Firefox 28?
    Firefox 29 has a new version of Sync and once a Sync account has been updated to the new Sync, it is '''not''' compatible with Firefox 28 and earlier.
    ''added a '''key''' word ''= '''not''''' to my response - sorry for that omission'' - Ed

  • Can the target system in the REF command dynamically be specified?

    Hello all,
    I have a main script which calls additional other scripts in different target systems (according to a defined system landscape). So far so good. Now when I have another system landscape in place, it's very likely that I have to handle other target systems.
    With the REF command I can call these other eCatt scripts but how can I dynamically specify the target system? According to the eCatt team this is not possible. Does anyone of you have an idea how I can have a workaround? Is there a BADI / Userexit etc. which I can use?
    I want to avoid to work with version, because I would duplicate the script. When you maintain one place you also have to remember the other versions you have.
    Kind regards,
    Thomas

    Hi Thomas,
    >Now when I have another system landscape in place, it's very likely that I have to handle other target systems.
    I suggest to keep the target system at the REF command (since that anyway should have a name which qualifies the role of your system instead of system name, e.g. ERP or CRM or SCM ).
    To change the landscape you can exchange what makes up the landscape: your system data container.
    Sample:
    1) SCRIPT "Scenario" call SCRIPT "Create_Order" in system CS1 which is CRM system
    2) SCRIPT "Scenario" call SCRIPT "Check_Replicated_Order" in system ER1 which would be ERP system
    As long as you are about to code the scripts:
    - Have a system data container SD_DEV
    - Define system CRM with rfc-destination to CS1 and ERP with rfc to ER1
    - In your scripts only use the terms ERP and CRM
    -> REF ( Create_Order, CRM ).
    -> REF ( Check_Replicated_Order , ERP ).
    Once you come to test another landscape:
    - Simple copy SDC SD_DEV to SD_TEST_LANDSCAPE1
    - Exchange only the rfc destinations to have ERP and CRM point to new systems
      (don't modify the existing destination, since you will need them still)
    Now start your Script "Scenario" with System data container SD_TEST_LANDSCAPE1 on start screen or even assign the system data container name in Test organizer at test package level.
    This is the way you can switch landscapes very easily. It only requires to use logical target system names from the beginning.
    Hope this helps or at least starts a discussion about it.
    Best regards
    Jens

  • How can I link .svg files in the .html code?

    How can I link .svg files in the .html code?

    I use the FileBrowser app by Stratospherix to do this.  I can watch / stream my movies on my iPhone / iPad from my hard drive connected to my Airport Extreme.  I can access all the files on that hard drive as well. 

  • How can I link my daqmx code to another daq assistant to hear my audio output?

    Hi,
    I got a burning question about my school project. I need to use labview and my NI-mydaq to test the difference between
    various samples rates and bit depths.
    I linked an mp3 file to the AUDIO IN of my NI-mydaq and created a way to be able of switching sample rate while running my program.
    Now I would like to link my program inside the NI-mydaq to my AUDIO OUT...
    So...  I generated daqmx code out of an input daq assistant, how can I link my daqmx code to another daq assistant to hear my audio output?

    Hello Fontys_Student...,
    I am not sure I properly understand your question.
    You want to, first, acquire a signal from the AUDIO IN input, second, do some processing on the acquired signal and, third, generate this processed signal at the AUDIO OUT, right? What is the part causing some troubles?
    If you already have the signal acquired and processed, you can simply wire this processed signal to the "data" input of a second DAQ Assistant, right?
    Did you already have a look at the myDAQ User Guide (http://www.ni.com/pdf/manuals/373060e.pdf)? On page 32-35, there is an example showing what you need I suppose. 
    Cédric | NI Belgium

  • How can I link table KONV with table VBRP and VBRK using KSCHL field?

    Hi experts,
    How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
    Thanks,

    Hi,
    If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
    select-options: x_KSCHL for T685l-KSCHL.
    select kwert
               kbetr
               knumv
               kposn
               kschl
          from konv
          into CORRESPONDING FIELDS OF TABLE it_konv
          FOR ALL ENTRIES IN it_all
          where knumv = it_all-knumv
          and   kposn = it_all-b_posnr
          and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
      endif.
    Hope this helps.
    Regards,
    Chandravadan

  • How can I link my two sites?

    How can I link my two sites?

    What do you mean by link?  You can add a text based hyperlink in Site A to Site B and do the same in Site B. 
    Or you can add a totally blank page to Site A and name it Site B.  Then add the following code to an HTML snippet:
    <script type="text/javascript">
    parent.window.location = "URL TO SITE YOU WANT TO REDIRECT TO"; </script>
    Thanks to Cyclosaurus for this code
    The Site B link will appear in the navbar of Site A and, when selected, will immediated redirect the visitor to Site B.  Create a similar page in Site B pointing back to Site A.
    OT

  • How can i print all the contect of the code in sapscript window ? ?

    how can i print all the contect of the code in sapscript window ? ?

    Hi,
    Do you mean that you want to print the ABAP code to SAPscrip form ?
    Svetlin

Maybe you are looking for