T-code CS03 in ITS

Hello All,
I'm facing problems when using t-code CS03 in ITS.
1. When I click on Document item in a BOM, it is not navigating to document in CV03N. the system reacts nothing....
2. From document tab, I cannot come back to Material and General tab
3. Back button and few more buttons are not working in ITS - CS03 tcode
I came across similar threads, However the solutions are not mentioned in it.
Could you please let me know any solution provided by SAP for this ITS limitations? Thanks!!
Regards,
Saravana

Hello
In transaction CS02/3 shows the document assigned to the BOM item
transaction MM02 is showing the document assigned to the material master.
Transaction CV02N/03N
Go to the object links tab: there you can choose the material master ' and ' the BOM item separately.

Similar Messages

My iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.2

my iTunes won't detect my iPhone that has to be restored via iTunes *because if pass code problems* and its running iOS 7.0.4

If itunes is comming up and saying it can't read the device because it's locked with a passcode, you may have to put your device into recovery mode first.
To put your device in recovery mode: (Following these steps will erase your device and reset everything to factory defaults)
1) press and hold the power button until you see the slide to power off option
2) swipe to power off
3) Press and hold the home button while the device is off and connect it to your computer. Continue holding the home button until you see a graphic with the iTunes logo with a picture of a USB cable below it.
4) iTunes should give you a message that it has detected a device in recovery mode. Click ok and then select Restore iPhone. iTunes will download a fresh copy of iOS and then wipe the device and restore it. Depending on the speed of your computer's internet connection this may take a while. Just leave the iphone connected to your computer until it's finished.
If itunes is not detecting it at all or is Not giving you the message that the phone is locked with a passcode, you may end up having to reinstall itunes. This seems to be a fairly common problem after the most recent itunes update (11.1.5)
If this is the case and you happen to be running a windows based computer you will have to uninstall itunes in this order from your programs and features option in control panel:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Then download and reinstall itunes from itunes.com try putting your device into recovery mode again and restore.
Hope this helps.
Cheers.

ADVICE!!:Reading in a module of code and testing its complexity

Hi,
I'm very confused about coding this program.
I have to read in a text file of a module of java code and test its cyclomatic complexity. I can't use a parser because it has to run on networks which wouldnt allow it installed. It has to be made by the java jdk 1.1.8 API.
Things that are confusing me are as follows:
1)how to read the file in: I would read the file in line by line but I feel this could lead to problems with measuring the modules complexity.
i.e a do while statment.
2) how to measure the complexity. I have thought of several ways these are counting the braces(wouldnt work because many people dont use braces in one line if statements etc) Count the keywords for,while,do while,if is the other one.
I'd be grateful for any advice, i think im confusing myself quite a bit over something thats probably simple.
Thanks in advance,
Chris

Hello Chris,
Check the below link (if you have not already done so) to alleviate some of your confusion.
http://www.sei.cmu.edu/str/descriptions/cyclomatic_body.html
As mentioned in the paper, you have to calculate the cyclomatic complexity by CC=E-N+p
All you have to do is rightly figure out how to calculate E,N and p
:D
Ironluca

I have redeemed my code and downloaded the Mountain Lion overnight. Now I am unable to find the download and unable to install it. And the code says that its already redeemed. What can I do? Please help.

I have redeemed my code to download the Mountain Lion. I left it for download overnight. Now I am unable to find the download and its not installed. And the code says that its already redeemed so I cannot download the Mountain Lion again. Please help.

Look in your Applications folder.

HT2693 I bought an itunes gift card but when i try to redeem my account it says invalid code. I put in the code perfectly but its still not working. The shop wont take it back either, What should i do?

I need help, i bought an itunes gift card but when i try to redeem my account it says invalid code. I even checked the code and i had it 100% right but its still not working. The shop in which i bought it wont take it back so i dont know what to do. Please help.

iTunes Store: Invalid, inactive, or illegible codes

Write code for this its urgent

hi its a alv bills of material report plz write code for this
Develop a report to high light the bom and/or master receipes fall into the constrained planning horizon those are not ready for porduction
this report will identity the items with a bom with a status other that 03(ready for production) and/or master receips witha a status other than 04(released). the items will be reveiwed in predefined horizon.
within a few weeks of entering the 18 th week constrained planning horizon.
for this report take bom tables stko,stpo,mast.
in sel-scren take mrp controller, plant, divison.
send immedialtly

Brother this is not the correct way to ask.
In your words you are commanding...
But we have to request the EXPERTS.
WE are in learning stage dont order or command.
Just request them in another way...... then only u get the required reply....
With regards,
Prasad.

Download from SAP - Get same info displayed by T-code CS03

Is there an RFC that can be used to return to a VB program essentially the same information that shows on the CS03 display? What I really want to get to is something that will return component, qty required,and an effective date for that component.
For example, if we change the quantity required for a component, I'd like to be able to supply the parent item and a date range and be able to decide whether the component line item should be included or excluded based on the dates of its from and to dates displayed on CS03.
Elaborating further, I made item "abc" during the week of November 9-15, 2009, and have a process order 999. To make "abc", I use component "def", but the production BOM for "abc" had a change made to item def to increase the quantity required from 1000 to 2000 effective on November 13, 2009. How can I get information back that shows two records like
def, 1000.000, November 9, 2009 (or February 2, 2008 if it was originally set up on February 2, 2008), November 12, 2009
def, 2000.000, November 13, 2009 (or February 2, 2008 if it was originally set up on February 2, 2008), Dec 31, 9999 (or whatever is set as the ending date)
Also (AND THIS IS IMPORTANT), on the screen displayed by CS03 what does SAP mean by "Valid to"? In the United Sates, we would use "Valid Through" if we mean that a date is included in a range. In my example above, I would mean that def is effective THROUGH (including) November 12, 2009. In Britain (and I don't know about Germany since that is where SAP was developed), I have read that if they say "November 2, 2009 to November 15, 2009", they mean November 15 is INCLUDED in that range. If we use that same phrase in the United States we would mean that November 15, 2009 is EXCLUDED from the range, else we would say "November 2, 2009 though November 15, 2009".
Thanks for any help.

Check OSS [767260|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=767260] and [1530974|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1530974]
and auth object S_GUI activity : 61

Code generating in ITS

Hello,
I have a link on ITS Page.
In code I have written it as \dfsrb\DfsDE\LOC\aaAE\bb\cc\dd.html
But in source code the link generated is \dfsrbDfsDELOCaaAEbbccdd.html
Could you please tell me how this is happening.
What could be measure to avoid this .
Regards,
satya

Hello Satya,
Not sure why the forward slashes are being removed, but you could try encoding them. (%2F)
edgar

My little sister kept entering the wrong pass code and now its disabled, and it says"connect to itunes" but i don't know what to do? Help!

My little sister kept typing in the wrong pass code for my ipod touch and now its disabled, and says connect to itunes but i can't unless i'm on my ipod. so please comment helpful solutions!!!!

http://support.apple.com/kb/ht1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Problem with abap code in lsmw.its urgent

Hello guys iam migrating open ar line items using lsmwand i need to create reconciliation key automatically so iam using below code which is working fine in abap editor but i inserted in the lsmw abap code block at step 5 mapping fields iam getting error as that function module does not exits .can any body go through the code and give me suggestion.your will be greatly appreciate.
types: begin of ty_fikey,
       fikey type fikey_kk,
       resob type resob_kk,
       end of ty_fikey.
data: wa_fikey type ty_fikey.
CALL FUNCTION 'FKK_FIKEY_CHECK'
EXPORTING
    I_FIKEY                      = 'jana56481'
I_OPEN_ON_REQUEST            =
I_OPEN_WITHOUT_DIALOG        =
I_FOR_MASS_POSTING           =
   I_RESOB                      = '24 '
I_RESKY                      = ' '
I_NON_EXISTING_ALLOWED       = ' '
I_FOR_POSTING_IN_UPD         = ' '
EXCEPTIONS
NON_EXISTING                 = 1
OTHERS                       = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
select single fikey resob from dfkksumc into corresponding fields of wa_fikey where resob = '24'.
e1bpdfkkko-fikey = wa_fikey-fikey.
Regards
Janapathi

Hi,
Refer link:
<a href="http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc">http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc</a>
Pls do reward points.
Regards,
Ameet

How to process inbound process code by populating its value

hi friends,
we have created a inbound process code for ticket creation and actualisation, for process an inbound idoc and we need to test by populating values to it
As i am a newbie to IDOC processing please help me in this regards by giving step by step
thanks in advance
S.Janagar

answered

HT1657 I'm trying to rent/buy a movie thru my Apple TV and I enter my security code and it keeps going back to enter your security code, even tho its the correct security code...What am I doing wrong?

Apple TV keeps asking me to enter my security code and I do and it keeps going back to the security code screen even tho my security code is correct and verified.

Click here and request assistance.
(91679)

Just updated my old iphone4, it as no sim card in, as i use it mainly for playing music.updated it to ios7 and when i intially open it up, it asked for a sim lock code.was'nt sure of this. i put the passlock code in. now its asking for a PUK code.

***.are Apple doing? why offer an update without warning people about the consequences!
I've just updated my old iphone4 to ios7. this phone as no sim card, as i use it more like an ipod..after the update it ask for a code, i put in the passlock code.
Unbeknown to me the sim lock and the passlock codes were different! as the sim as been deactiavted by my carrier they cant give me a PUK code!
I'm now stuck with a phone i cant use
any suggestions please!

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

How to use a provider code without installing its package?

Hi,
I got a problem here.
I found a security provider package named "cryptix" is what I need in my own software.
My question is how to distribute it with my software?
my app is a aaplet and I couldn't suppose all user machine have been installed this package before try my app.
It is a simple question, I know.
Thanks you all.
greg

You are writing an Applet right? If so you have a jar file that is downloaded when the applet runs that contains the applet code. You simply need to add an archive tag to your applet's HTML file which includes the cryptix jar. If you are using the Plug-in then you can set that jar to cache.
The problem will be registering the cryptix provider with the security manager. I am not sure about this but I would imagine calling Security.addProvider() would throw an exception while running in an Applet sandbox.
maybe I'm wrong but I would check before you get to far!

Hi, general, restrictions and then enter the code it says its incorrect and we have no idea what it is..

Can anyone help me reset the restriction code under "general" then "restrictions" there is a restriction code that we never set but have no idea what to put in there now.... it wont accept any numbers. Thank you.

try to put it in dfu mode/recovery mode (http://support.apple.com/kb/HT1808) then try to restore it by connecting it to itunes.

T-code CS03 in ITS

Similar Messages

Maybe you are looking for