T-code for ending the active contract in RE-Fx

Hi Experts,
Is there any separate transaction to end a RE contract.
Currently I'm terminating the contract, by manually entering the valid to date in the genral data tab page of the t-code RECN.
Is there any other way available to end an active contract?
Kindly assist.
Thanks & Regards
Shantanu

Shantanu,
Terminating Contracts is a Business scenario and usually a Business process is defined for such scenario. What I mean is if you wish to terminate a Contract you may have to execute series of steps in SAP related to your contract, example terminating Objects, taking care of outstanding payments/receivables etc.
I could not find a Valid to date on Contracts General Tab which you quoted. But if you are talking about Contract end date on Terms tab then that is the expiration date of the term or the Contract. Contract will expire on that date, but you can certainly renew the Contract.
If you wish to terminate a Contract, I would suggest to execute Notice on Contract and populate NOTICE PER date. Depending on your requirement you can choose to give notice on Objects too. This will mark this Contract as Canceled. This is an event and you can use it to control subsequent tasks in your business process. For this process you can set up Notification and reminders too.
There is a Notice Tool which you can use for mass termination too.
Thanks,
Jag

Similar Messages

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

T.code for check the Total SRS

pls tell me t.code for match the SRS (stock requitions slip)from store or production ?
Thanks
Rekha Sharma

U can check in MB25 or in MB51.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.

Transaction code for checking the capacity of a job

Hi,
Can anybody tell me if there is a transaction code for viewing the capacity of Job.
Thanks and regards,
Avinash.S

Hi Avinash,
I am not geeting what you want normally CM01 for w/c vise Load you can use.
Pls elaborate yr problem a little bit.
Umesh

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

T-Code for changing the default Exchange Rate reference for creating PO?

Dear All,
Can somebody kindly give me the T-Code for changing the default
Exchange Rate reference for creating PO? Is there a Step by Step
procedure before changing the default exchange rate?
Thank you in advance.
Regards,
Gopesh

Hi
There is not such Tcode to change the default exchange rate from the PO.
If you want you can confugure the exchange rate in the following path in the IMG,
SPRO>MM>LIV>Incoming Invoice>Configure How Exchange Rate Differences Are Treated
Hope it helps you.
Cheers
Umakanth

T.Code for checking the total value of a material

Hi Experts,
Can anybody tel me the T.code for checking the total value of a material which is procured in a specified period?
Thanks in advance
Channa

Refer Tcode ME80FN click on Change Veiw & select Purchase Order History with this you can get PO-GRN-INVOICE Qty & Value details
Last button on Application tool Bar it is in line of filter, total etc icons
Also check below reports :
MC$G - PURCHIS: Material PurchVal Selection
MC$0 - PURCHIS: PurchGrp PurchVal Selection
MC$< - PURCHIS: MatGrp PurchVal Selection
MC$4 - PURCHIS: Vendor PurchVal Selection

What is the transaction code for see the Web Services available in SAP

Hi
I came to know that SAP has provided its own webservices... I need some information on that... If any one has documentation on that can u please send it to me... My ID is <b>[email protected]</b>.
What is the trasaction code for see the web services available in SAP.... Can any one help.. Please its urgent
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B

Hi,
you can find Web Services (Enterprise Services) in the Enterprise Services Workplace (ES Workplace). The ES Workplace allows you to explore, test, and use enterprise services to make enterprise SOA tangible. Here, you will find all of the currently productized enterprise services by SAP.
Best Regards,
Boris Mueller
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/esa/esapreview">ES Workplace at SDN</a>
<a href="http://esapreview.sap.com:82/socoview(bD1kZSZjPTgwMCZkPW1pbg==)/flddisplay.asp">ES Workplace</a>

What is the T-code for Viewing the Payment Advices....

Hi,
What is the T-code for Viewing the Payment Advices....
Regards
Sap Guru

Hi,
Payment advice creation - FBE1
Payment advice Change - FBE2
Payment advice Display - FBE3
Payment advice Delete - FBE6.
Assign points if helpful.
Thanks,
Vasu..

Transaction Code for seeing the files in the Application Server

Hello All,
Can anybody please give me the transaction code for seeing the files in the Application Server
Thanks in Advance,
Regards,
LIJO.

hi
good
try with tcode AL11.
thanks
mrutyun^

HT1539 Why Do I keep getting an error message telling me "Code redemption is temporarily unavailable. Please try again later." whenever I try to redeem my digital copy code for "Oz The Great and Powerful"?

Why Do I keep getting an error message telling me "Code redemption is temporarily unavailable. Please try again later." whenever I try to redeem my digital copy code for "Oz The Great and Powerful"?

I had the same problem so I decided to try going to website on the back. (DisneyOzMovieandOffers.com). It will take you to a page that says to redeem code, enter the code that is given to you and click enter. It will give you options of where you would like to download it from. Click iTunes and it will give you the correct code to download the movie from iTunes.

Code for displaying the word doc file from servlet as response.

Hi can any provide me code for displaying the word document form servlet as response.
here i have file from file it should ale to read them and display it.
i have written code but the proble here is in displaying.it ios as not showing as word.can any one help me here
vijay

Are we talking of HTTP?
If yes, you'll need to provide an appropriate content-type and use the binary output stream.
IE does not trust the content-type header but relies upon the file name, so set it too.
response.setHeader( "Content-Disposition", "attachment; filename=" etc. Edited by: BIJ001 on Oct 22, 2007 10:10 AM

Code for repositioning the borders in SFP

Hello Forum,
Could someone help me with the code for repostioning the borders in SFP?
Thanks
Best Regards
D. Swathi

Hi Swathi,
Are you asking about the page border repositioning. Follwing is the code to reposition any UI Element on the form.
The code is in FormCalc and Java Script and you have to write it in the form's Script editor. Write the code in the event of the UI element you want.
To set Margins use follwing:
Margins
Left
leftInset property
Subform1.margin.leftInset = "measurement"
Right
rightInset property
Subform1.margin.rightInset = "measurement"
Top
topInset property
Subform1.margin.topInset = "measurement"
Bottom
bottomInset property
Subform1.margin.bottomInset = "measurement"
Size and Position
X
x property
Subform1.x = "measurement"
Y
y property
Subform1.y = "measurement"
Width
w property
Subform1.w = "measurement"
Height
h property
Subform1.h = "measurement"
Width Auto-fit
minW property
Subform1.minW = "measurement"
Height Auto-fit
minH property
Subform1.minH = "measurement"
Hope it will help.
Regards,
Vaibhav Tiwari.

Code for displaying the elements of ArraList and HashMap

hi..im new to java ..
tell me the code for displaying the elements of ArraList and HashMap

myj-ava wrote:
wt abt displaying the elments of HashMap?plz..give clear codehey, this is not a code-giving service. This is a forum of volunteers who help others who have specific questions. I find that the greatest help is given to those who have shown that they've put in at least some effort. You have shown none. Please look at the Sun tutorials first, then come back with a specific question if anything there confuses you.

T-code for ending the active contract in RE-Fx

Similar Messages

Maybe you are looking for