T code for vendor,customer line item display

we are using ecc 6.
  I would like to know the wheter any tcode is available in ECC6 for cust and vendor line item display.
NEW TCODE for FBL3N is FAGLL03. Like that any new new tcode is availbale for FBL1N & FBL5N?
Please clarify.
Thanks
Rajesh

Dear Rajesh,
There are not direct 'replacement' as the FAGLL03->FBL3N for FBL1N and FBL5N.
So the FBL1N and FBL5N can be used further without any problem.
As stated before, only the G/L are has directly changed.
But in the relation to the New G/L, there are two new 'Recherche' tools for the vendor and customer area in relation to the 'Segment' and 'Profit Center'.
You can find them in the FGI0 transaction.
They are called:
0SAPRECIEV01
0SAPRECIEV02
0SAPPAYABL01
0SAPPAYABL02
Maybe they can also help you further.
Best regards,
Christoph

Similar Messages

  • Profit Center for Vendor/Customer line item in F-02

    hi all,
    We have implemented SAP ECC 6.
    At the time of vendor line item posting, there is no input field for profit center.
    Can anyone please tell the way out for Profit Center field pop up in case of t-code like f-02 for vendors & customers
    Abhishek

    Please note the following:
    - On FBL5N and alike customer/vendor line item reports you won't find
    the field profit center filled; hence you can't directly input it during document entry (as pre-mentioned)
    and the profit center for customer/vendor gets inherited (as of document splitting functionality) from the document other line item(s) (according to the defined document splitting rules...)
    - Yet you can use the below reports (with New G/L.) to get the customer/vendor line items wise reporting over a profit center (i.e. unlike FBL5N & showing the inherited customer/vendor profit center in the G/L. view)
    S_AC0_52000887 - Line Items->Open Items->Receivables: Profit Center
    S_AC0_52000888- Line Items->Open Items->Payables: Profit Center
    In both reports you can use:
    "Custom Selections" -Dynamic Selections Icon- enabling you to filter the output according to
    a. Customer line items specific data entered within the posted document(s)
    b. General ledger items of the G/L. view of the posted document(s)
    & the "Output type" includes like most of the New G/L. Reports:
    - Graphical report output
    - Classical drill-down report
    - Object list (more than one lead column)

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • Vendor - Customer Line Item subtotal

    Hi,
    I link my vendor to my customer master. E.g. Vendor code is 100000, customer code is 100001 (in this case, i can't make the customer and vendor number the same)
    When I execute the report of either Customer Line Item Display, or Vendor line item display, I need to display both AP/AR transactions for this same entity; and when I execute the report it has to be for all vendors and all customers.
    Basically, I need a common link that I can sort for the same entity to give me the subtotal for both AP AR open items.
    Any Idea?

    Hi,
    Yes, I understand that. But I need a common column/fields in which I can sort for both AP and AR open items together. My objective is to subtotal by entity (whether it's customer/vendor items).
    Currently, if I execute FBL5N, the customer items would be subtotaled under one account number and vendor items would be subtotaled by another account number. How do I combined these for my Subtotaling?
    Example when I execute FBL5N
    Account    Vendor    Document Type
    100445                      RV
    100445                      RV
    100271      100271
    How do I subtotaled by this business partner, since they both have different account number?
    Another question is: How do I pulled out customer / vendor name in FBL1N and FBL5N report at the line item level? Does SAP provides this facility to include the Name for line item level reporting?

  • Business Area wise Vendor & Customer Line item report

    Hi
    We are on SAP ECC 6. Can I get Business Area wise Vendor & Customer Line item report (as like FBL1N)
    Regards
    Debojyoti

    Hi,
    In FBL1N in dynamic selections you can give the business area as the selection parameter otherwise after execution of report with the help of layout you can set filters for business area.
    Go to FAGLB03 give the vendor or customer reconciliation account along with business area. So after you execute the report you can choose vendor code and business area.
    Check once it may help you
    Regards,
    Sankar

  • Customer balance confirmation does not equal to customer line item display

    Hi All
    When I run F.17 transaction (program SAPF130D) the totals don't equal to "customer line item display" program (FBL5N) totals.
    When I run it for a specific customer and company code, I can see that some items from the customer line item display are missing. These are regular items (invoices) like other documents that appear in the balance confirmation.
    The selection parameters are the same and the date is equal - I run the report as of today.
    Can anyone advice please?
    Thanks
    Ofer

    Hi
    The problem was because of a customer hierarchy issue. Some of the invoices were issued to different sold to but with the same payer.
    It can be displayed also in the balance confirmation. I just need to mark the two check boxes:
    "Head offices and branches" and "check alternative head offices". Excellent.
    Now I have another problem, that in this case, this issue is mentioned in the output: "Dear customer, in this balance confirmation we added the next branches...etc."
    Can this remark be eliminated from the output?
    Thanks
    Ofer

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

  • Few queries about foreign revaluation for vendor/customer open items

    I am trying the transaction F.05 for the first time for vendor & customer open items in foreign currency. I have a few queries:-
    1. The ouput contains 2 exchange rates. One is picked from the transaction header. My query is from where is the other rate being picked up. In my current system, I could make out that exch rate in transaction header is being picked automatically from table OB08....however I am unable to deduce the source of the 2nd exch rate.
    2. What is the significance of "balance sheet preparation valuation". Earlier in test runs, only "new difference" was getting populated. However the user wanted to see "old diff" also. So while doing some trial run in test client, I checked the "bal sheet prep valu" and posted.....after this run, I am getting values in "old diffe" and "new diff" also. And the posted amount is the difference of the two. What is the significance and ideal way?
    3. Should the entry be reversed if I am revaluating at year end? Why I am asking is because in some threads I read that revaluation at year is not to be reversed....
    Thanks,
    SM

    1. To find out difference latest date(Key Date for OI Overview) will be taken by comparing with document posted dated. Based on that system shows diffrences
    2.   The items are valued using the exchange rate valid at the key date. The
          difference determined in local currency is output and posted. The
          valuation can also be done for parallel local currencies and according to
          different valuation approaches (HGB, GAAP).
          The result of the valuation is required for the creation of the financial
          statements. You should therefore carry out the valuation before the
          grouping of receivables and payables with program SAPF101. The valuation
          difference is then noted in the document. Use the valuation areas to
          calculate a different valuation method, or to save the result for further
          processing activities.
    3.   we need to reverse entries .

  • Profit Center wise Vendor & Customer  Line item report

    Hi
    We are on SAP ECC 6. Can I get Profit Center wise Vendor & Customer  Line item report (as like FBL1N)
    Regards
    Sandeep

    Hi,
    Please Try using "S_ALR_87013343 - Profit Center: Receivables " and "S_ALR_87013344 - Profit Center: Payables"
    Reports
    Best Regards,
    Ravi Reddy

  • Customer line item display

    Hi All,
    I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
    Thanks,
    Veni.

    Hi All,
    I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
    Thanks,
    Veni.

  • Text blank in Customer line item display for credit notes

    Dear SD gurus,
    We are creating credit memo request in SAP and credit notes are created later on. Now when we look the customer line items, the credit note number is seen over there. But the text field is coming blank. We want to enter some text in the credit memo request and the same should be displayed in the customer ledger i.e., customer line items.
    Kindly suggest some solution.
    Thanks in advance.

    Hi
    Can you elaborate more? Is it that the text is not getting copied form Refernce document to subsequent document ?
    Regards
    Deepak

  • Unable to update profit center or plant code in the customer line item

    Hi,
    We require the profit center and plant code and division in FI
    documents (Posted through billing document or through direct FI entry)
    We are unable to input plant or profit center in the customer line item
    while using F-21 or any other FI transaction
    The plant and profit center is not appearing even in customer line item
    in RV document (From SD billing)
    We have made the Field status group as optional for the reconcilation
    accounts.
    Regards
    Sembian

    Hi
    Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
    Regards
    Neeraj

  • Need profit center in Vendor & customer Line items in reports FBL1N & FBL5N

    Hi,
    how to get profit center field in reports FBL1N and FBL5N.  Please help.
    Regards,
    Sumit Jain
    Moderator: Please, search SDN; it has been answered several times

    Hi,
    I have done the below to get this. (You can change the naming convention of function module as per your wish):-
    Step 1:-
    Create function module Z_GET_PRCTR as below:-
    Import:-
    BELNR     LIKE     BKPF-BELNR
    BUKRS     LIKE     BKPF-BUKRS
    BUZEI     LIKE     BSEG-BUZEI
    GJAHR     LIKE     BKPF-GJAHR
    Export:-
    PRCTR     LIKE     BSEG-PRCTR
    FUNCTION Z_GET_PRCTR.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(BELNR) LIKE  BKPF-BELNR
    *"     VALUE(BUKRS) LIKE  BKPF-BUKRS
    *"     VALUE(BUZEI) LIKE  BSEG-BUZEI
    *"     VALUE(GJAHR) LIKE  BKPF-GJAHR
    *"  EXPORTING
    *"     VALUE(PRCTR) LIKE  BSEG-PRCTR
    DATA: ZDOCLN LIKE FAGLFLEXA-DOCLN.
    CONCATENATE '000' BUZEI INTO ZDOCLN.
    SELECT SINGLE PRCTR FROM FAGLFLEXA INTO PRCTR WHERE RYEAR = GJAHR
                                    AND  DOCNR = BELNR
                                    AND  RLDNR = 'NL'
                                    AND  RBUKRS = BUKRS
                                    AND  DOCLN = ZDOCLN.
    CLEAR ZDOCLN.
    ENDFUNCTION.
    Step 2:-
    Then create the Function Modules as below:-
    Z_LINE_ITEMS_GET_PRCTR (Copy of SAMPLE_INTERFACE_00001650)
    FUNCTION Module Z_LINE_ITEMS_GET_PRCTR.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(I_POSTAB) LIKE  RFPOS STRUCTURE  RFPOS
    *"  EXPORTING
    *"     VALUE(E_POSTAB) LIKE  RFPOS STRUCTURE  RFPOS
    Initialize Output by using the following line -
    E_POSTAB = I_POSTAB.
          E_POSTAB = I_POSTAB.                "<-- important
          IF I_POSTAB-PRCTR EQ SPACE.
              CALL FUNCTION 'Z_GET_PRCTR'
                   EXPORTING
                    BELNR           = I_POSTAB-BELNR
                    BUKRS           = I_POSTAB-BUKRS
                    BUZEI           = I_POSTAB-BUZEI
                    GJAHR           = I_POSTAB-GJAHR
               IMPORTING
                    PRCTR           = E_POSTAB-PRCTR
               EXCEPTIONS
                    OTHERS          = 1.
          ENDIF.
    ENDFUNCTION.
    Step3:-
    Transaction FIBF:-
    Settings -> Products -> of a Customer
    PRCTR     Profit Center in Line Item Display          Active
    Settings -> P/S Module -> of a Customer
    00001650     PRCTR                    Z_LINE_ITEMS_GET_PRCTR
    Step 4:-
    Create the layout for FBL*N with display of the profit center.
    Regards,
    Gaurav

  • Profit center  in Customer Line item display FBL5N

    Hi All,
    when we post to the customer, at the customer line item we cant enter any profit center (as there is no field to input). But at the postig to GL (line item 2) we have the profit center to key in .
    But when using the standard report FBL1N, we have the field Profit center In the change layout.... Why is this provided. Does when we post to the GL line item with  profit center , is it copied to the filed ?
    Is there any configuration missing or need to be done.
    Please advise .........
    Best Regards
    st

    Hi ,
    When you use PCA the idea is to capture revenues and profits on P&L accounts and by assigning some balance sheet accounts in config.
    subsequently for AR and AP accounts you do the periodic transfer and that is when you assign the Profit Center based on the ofsetting entry.
    As per SAP you cannot have a profit center at that point of time since a billing document can have multiple lines/multiple profit centers where as on line to the vendor/customer.
    Let me know if you need further explanation.
    Thanks,
    Praveen

  • DataSource for FBL5N - Customer Line Items

    Hello,
    Could someone please let me know if there is any Business Content DataSource existing for fetching data from FI transaction - FBL5N for Customer Line Items?
    Many thanks.
    Regards,
    Sri.

    Hi Selva, Raghavendra,
    Thanks for the info.
    I see that there are 2 datasources:
    0FI_AR_3: Customers: Line Items
    0FI_AR_4: Customers: Line Items with Delta Extraction
    What is the difference between these two DS (apart from '_4' says with Delta Extraction)? Does '_3' not bring Deltas?
    Is the following flow correct? :
    0FI_AR_4 (DataSource) -> 0FI_AR_4 (InfoSource) -> 0FIAR_O03 (DSO - Accounts Receivable: Line Items) -> 0FIAR_C03 (InfoCube - Accounts Receivable: Line Items)
    Many thanks.
    Regards,
    Sri.

Maybe you are looking for