T- code for viewing cost of raw material

Hi Experts,
There are so many elements in arriving at cost of raw material such as moisture loss, transit loss, handling loss etc. Is there any report in SAP which shows all these elements, if yes, what is the T- code? Please advise.

Hi,
Please check the table MBEW for the material for its cost normally or the MM03 .However at the stage of raw material the transit loss etc? Normally if any operation is done over the material then losses like this will come .
Normally once the PP things like Routings etc are done and then for the finished material which contains this raw material will have costing run to have the final cost at CK11N .
If not the above answer suffie you please elobare your requirement .
Regards,

Similar Messages

  • Transaction code for viewing Costing Sheet

    Hello Sap Gurus,
    I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
    Regards,
    Pawan Kumar

    Dear Pawan Kumar,
    For checking the costing sheets related to product cost controlling use KZS2.
    For Costing sheets related to Internal orders use KALK.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM

  • Reg. Process cost and raw material cost added

    Dear Friends
    Please consider our below scenario
    PO is created and stock is maintained in unrestricted (Raw material)
    and then Production order is created for Cut pcs and Raw material is issued to production order through 261 mvt type
    next Cut pcs is received against the production order through 101 Mvt type. Now operation cost is not added with the Raw material cost, only the Raw material cost is represents in MIGO-> FOOTER  - QUANTITY->Quantity in LC field.  What to do to calculate the process cost too.
    When we receive the cut pcs what we attached as component to the cutpcs's cost is calculated, the charge for Cutting is not calculated. we want both cutpcs charge(10.00 per pc)+component cost(raw mat. 180.00 per 1 kg)
    Cut pcs    10 pcs * 10 Rs   = 100 Rs
    Raw mat  10 kg * 180  Rs = 1800 Rs
    the total cost is 1900 Rs should come in that field
    Thanks
    Rajakumar.K

    Please give solution
    Thanks
    Rajakumar.K

  • What is the T-Code for creating Cost center - profit center standard hierar

    Hi,
    What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
    Thanks

    Hi Supriya,
    Create / Change Cost Center Standard Hierarchy - OKEON
    Display Cost Center Standard Hierarchy - OKENN
    Create Profit Center Standard Hierarchy - KCH1
    Change Profit Center Standard Hierarchy - KCH5N
    Display Profit Center Standard Hierarchy - KCH6N
    Srikanth Munnaluri

  • What is the T-code for Viewing the Payment Advices....

    Hi,
    What is the T-code for Viewing the Payment Advices....
    Regards
    Sap Guru

    Hi,
    Payment advice creation - FBE1
    Payment advice Change - FBE2
    Payment advice Display - FBE3
    Payment advice Delete - FBE6.
    Assign points if helpful.
    Thanks,
    Vasu..

  • Re : T-code for viewing SD document

    Hai
         I created sales order delivery billing documents. Let me know the t-code for viewing these document.
    Thanks
    mani

    hi,
    To View,
    For Sales Order : VA03
    For Delivery      :  VL03N
    For Billing        :   VF03
    To Change/Edit,
    For Sales Order : VA02
    For Delivery      :  VL02N
    For Billing        :   VF02
    Regards,
    Raghav

  • Transaction code for viewing invoice document and Claims document

    Hi Experts,
    Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
    I am in CRM and i do not know about the ECC transaction codes.
    request you 2 help.
    Thanks and Regards
    Shilpi

    hi,
    MM flow:
    purchase Requestion (ME51)
    Request for Quatation (ME41)
    Quatation from different vendors (ME47)
    price comparision (ME49)
    purchase order send to vendors (ME22)
    goods reciepts (MIGO)
    logistic invoice verification (MIRO)
    SD flow:
    Enquirey (VA11)
    Quatation (VA21)
    sales order processing (VA01)
    delivery (VL01)
    billing (VF01)
    Also follow this link.
    The specified item was not found.
    i hope this will help you out
    -Thanks & regards
    Saurabh Goel

  • Reg. Process cost and raw material cost add

    Dear Friends
    We are doing subcontracting that is E  &  L combination main material is Semifinished and component is Raw material, when I do goods receipt component is going to consumption through 543 mvt type(process order consumption),but the raw material cost and process cost is not added only the process cost is comming. what to do in this case. Pls help me, how to add both of cost.
    Thanks
    Rajakumar.K

    hi,
    What is the price control in accounting view you have maintained for semifinished? If it is S then it will not get updated.  Only if it is V, system will capture raw material & process cost to the Semi Finished.
    regards,
    JP

  • T.code for viewing stock at storage bin

    Hi all,
    What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
    Regards,
    Shailendra

    Hi,
    Following are the T-Codes:
    LS26   Warehouse stocks per material
    LI05    Inventory History for Storage Bin
    LX02   Stock List
    LX03   Bin Status Report
    MB52  List fo warehouse stocks on hand
    Regards,
    Suresh' D.

  • Standard report for the cost of raw materail in production of finished good

    Is there any standard report for calculation of raw material cost from the production order of finished goods.?
    plz help in this issue.
    Thanks.

    closed

  • CO/PP - Costing run - raw material cost component

    Hi
    In the costing run how raw material cost is taken?
    is it the material moving price/
    or calculated separately?
    Please help

    i think this depends on the costing variant defined in the order type
    in the costing variant, this come from the valuation variant
    for process orders you may check the following txns COR4, OPL1, OPN2

  • Transaction code for viewing billing details of a customer.

    Hi
    Do we have any tansaction code where we can view all the invoices related with a customer for a particular month.
    Please advise.
    Kind regards.
    Kate

    hi
    In R/3 VF05 will show list of all the invoices for the date chosen by the user entry
    This will show only list for a particular payer and material combination
    Regards
    N Ganesh

  • On costing run, Raw material price in Std price  field is getting updated

    Hi All
    When i am executing costing run (CK40N) for a FG, the price field in Std price for a raw material is getting updated.
    We are maintining price control as "V" in case of raw material.
    Is this right? if not, how can this be avoided.
    Regards
    Rakesh Hase

    HI Ian,
    Given enough time and money, anything is possible....
    You do not say which industry you are operating in. In some SAP industry solutions the functionality you describe is available - if I remember correctly IS Mill Product has something like that. It is available for use by companies that for example make copper cable. They get a regular copper price from an exchange.
    But it would be relatively simple to get a feed from an exchange with the daily closing price, and then write a little program that will read that file and post an MR21 transaction to update the price.

  • Can not view the code for views, triggers or table definition

    Hello Gurus,
    I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
    "create or replace" and then nothing, I could see the code in the past.
    When clicking on SQL tab for table I get following errors
    1. Ora-00904 Invalid Column name
    2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
    please advice.
    Thanks

    Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
    Did it start happening after upgrading sqldev? What version are you on?
    K.

  • T.Code for viewing list of customers of particular account group - Reg

    Hi,
    Can anyone suggest me T.code to view list of customer of particular account group?
    IS there any other method to view the list of customers in a particular account group?
    Please, it is an urgent requirement.
    Rewards sure
    Regards,
    SP.Balaji
    Message was edited by:
            balaji soundarapandian

    Hi Sai Srinivas,
    Already solved it and thanx for your help
    Regards,
    S.P.Balaji

Maybe you are looking for