T code is not showing up in list of Executable T code for User.

Friends,
Role with the ZFITIC_P2P tcode has been assigned to user.
But still user is getting the error message : " No authorization to exucute ZFITIC_P2P Transaction code"
Action Taken :
Run PFUD job again.
Refresh the user's buffer.
Ran the User Compar for the Role also.
Still if I go to SUIM ->> Transactions -> Executable by User -> List of T codes does not show ZFTIC_P2P Transaction.
Any suggestions...
Thanks,
Pranav

In addition to the transport order where the single role might be in a different composite, you should consider that changing the menu after having previously created a transport request will not add the new generated profile data to the TP request at the time when you release the transport - but it will add the menu items.
Please take a read through this thread: T-code PFCG and CTS
Did you make any further changes before releasing the transports?
It is best to only create a transport when you are ready and release them without delay to to tested. If you are brave then you can regenerate in the target system, but you should ensure that your SU24 data is identical and the role was intact: only "old" authorizations and nothing new was introduced or deleted.
Cheers,
Julius

Similar Messages

Old All-Day events not showing in Calendar List View

Reviewing events in my Calendar on the iPhone and have noticed that All Day Events that are older than one year do not show in the "List" view
For example, I have all my holidays in a calendar called "Vacation". Month and Day view list holidays from earlier than today (09 Sept 2008) properly, however list view shows nothing. Timed events (e.g. day trips) in the same calendar show.
Similarly no Birthdays appear in the past. I can see a case for Birthdays being omitted in the past, but not other events (e.g. wanting to know exactly when you went to that all day wedding last summer)

I have this same exact problem. For me, past events that have a specific time associated with them show up in List view; however, past events that are all day events only show in List view once in a blue moon only. Apple support has been absolutely clueless about this issue. They just tell me it's weird and they have no explanation. It's unbelievably annoying though.

TS1702 Updates in App Store is not showing the Apps list

After updating iOS to 6.1 in my iPhone 4s, while tapping 'Updates' in App Store, it is not showing the Apps list, though over the icon it is showing that 11 Apps has got Updates available.

hi
i've had your same proble,
you have to go on settings-->itunes&app stores-->apple ID and sign out.
after this restart your device:
Reset the iPhone by holding the sleep/wake button at the top right of the device and the home buttonat the bottom center of the face at the same time.
Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power off slider appears. If it does, just keep holding it.
Wait until the white Apple logo appears.
ok, now go to settings-->itunes&app stores-->apple ID and sign in again
... for me it worked
bye bye let me know if it works even for you!

Calendar events not showing up in list view

Hi,
some of my events are not showing up in list view. They are synced to the iphone. I can see them in day and month view.
It seems to me that events created with ical and synced through MM are not showing up, but I'm not sure.
Any idea?
Wilfried.

Yes I have also events from the holidays and the events I created.(Invitations and others) but where is this option for the NC? In general>notifications I can't find anything about showing events from different calendars there. And how is this subscription made because I had the holidays as soon as I input my account on this device. Maybe I included the holiday calendar but I don't remember. How is that made? And where to find these options?

Calendar items not showing ONLY in list view on iPhone

Weird: My Calendar items are not showing in the list view only, on iPhone.
They show when I search, they show in month, they show in Day views--just NOT in list view.
Ideas?

I just had the same problem (calendar information--for eight different calendars--OK on laptop and on Mobile me; on the iPhone only 3 of my calendars were displaying in "List" view, but all eight were appearing in "Day" view); first time I've encountered this problem (and immediately after installing the 11-February-2010 iPhone software update, so I'm suspicious that this might have been the cause).
Solution described in posting immediately above seems to have worked. I.e.,:
1. shut OFF MobileMe syncing for calendars on the iPhone (from Settings menu);
2. wait for calendar entries to be removed;
3. shut off iPhone, and wait 2 minutes;
4. restart iPhone;
5. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu).
All eight calendars now appear in List view (and still appear in Day view).

The firefox icon shows on my desk top and in my task bar, but why does it NOT show in my list of Program files?

My Firefox icons are showing and usable from the desktop and from the task bar; however, the Mozilla Firefox does not show in my list of program files. Why doesn't it show?

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you.

HT1727 help how do i make a purchased song my ring tone, it;s not showing on my list for ringtones

help how do i make a purchased song my ring tone, it's not showing on my list for ringtones

This song was purchased from the iTunes Store?
If so, you can't create a ringtone from music that was purchased from the iTunes store, but if there is a ringtone available for purchase and download at the iTunes Store with this song, you need to do that.
For music in your iTunes library on your computer that was not purchased from the iTunes store, there are a number of ways to create a ringtone with such music. With a Mac, there is an inexpensive or free app avaiable via Apple's online App Store named Ringer. Ringer has access to all music and sound files in your iTunes library that was not downloaded from the iTunes Store for creating your chosen segment of the song to be used for the ringtone. The app places the created ringtone in your iTunes library under Tones for transfer to your iPhone when syncing.
Creating ringtones on a Mac can also be done with GarageBand, and there is a manual way of doing this with iTunes.

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

USB001 Port Did not show in Port List?

sir,
When i want to install my printer driver, USB001 or USB002 Port did not show in port list.
How can i install this port manually, please send me link for manual setup.
Regards,
Sameer Ali

Read the installation instructions in your printer's user manual. Most USB printers must be connected to the computer first because they are classified as Plug-n-Play. Once the printer is recognized you should them be prompted for the location
of the printer software to be installed.Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Installed HP Color Laserjet 3600n software but does not show in model list

Recently installed the HP software for my Color Laserjet 3600n on my MAc OS X 10.5.5 laptop. The software says it is installed successfully, but when I try to set it up for printing via IP address, it says the ip address is valid, but at the bottom, iwhen I choose select drivers, my model does not show in the list.
Any thoughts?

What IP printing protocol did you try, and what does it say to use in the manual?
Since it's not a postscript printer, I wonder if it uses More Printers > HP IP? (instead of IP printer)

HT1338 why is my iPod 2nd gen. nano not showing up in list of itunes

Ipod nano will show sync sign for 3 sec then it will disappear and not show up in list for me to sync playlist

Well, after posting that, I decided to try deleting another app that was on the list and then Dropbox suddenly reappeared. I've seen others say that Open In is limited to 10 apps (which seems lame to me).
The strange thing is on my iPad, I only have 9 apps listed, but my iPhone allows 10. Anyone know why this would be or have a similar issue? Is there a way to make certain apps default to the Open In... list?

HT3353 I cloud does not show Numbers app listed although I Cloud button in Numbers is on. Therefore unable to back up Numbers data

I cloud does not show Numbers app listed although I Cloud button in Numbers is on. Therefore unable to back up Numbers data.

Did you want a answer to this. I have also backed up my iPhone but files are not showing in Numebrs App on iCloud

Dreamweaver codes does not show correctly

Hi, i have a problem with dreamweaver.
İ use last version Adobe CC. When i use dreamweaver for my job, codes does not show correct.
look ss please. letters cut of middle. look letter "g" "j" "y " Look MysQl letter. you see "y" is cut of
Thank you for help.

Are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"David Powers" <[email protected]> wrote in message
news:f9hns3$soa$[email protected]..
> FlashRenaissance wrote:
>> When I try to preview my .html pages in Dreamweaver
8 it does not know
>> the page. The only thing that shows up is a page
that "Cannot be found"
>> with a strange extension (TMPztriqmk5y3.htm).
>
> See the TMP at the beginning? It stands for temporary.
>
>> Any suggestions on how I can get the pages to show
up again in preview
>> mode? Maybe something went wrong in the preferences?
>
> Go to Preferences, select Preview in Browser, and
deselect the option to
> preview using temporary files.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Could not stop SDM server. Cannot execute Java process for stopSDM with parameters 50018

dear SAP
i have a system Solman 7.1
i'm upgrading Solman from SP04 to SP13 using SUM (SP12 patch 10) on windows 2012
and i faced error during Excution phase 5.6 in JAVA Stack.
phase : Excution - Actual Update
Error : An error has occurred during the execution of the Deploy software components step.
Could not stop SDM server. Cannot execute Java process for stopSDM with parameters 50018. Return code condition success evaluated to false for process java.exe for action ACTION_STOP
You can find more information in the files D:\usr\sap\SOL\SUM\sdt\log\SUM\DEPLOY-COMPONENTS_22.LOG and ProcessOverview.html.
To troubleshoot the problem use the provided information. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following keywords:
SUM??execute??component-deploy-700??deploy-components??com.sap.sdt.j2ee.services.servicesimpl.SDMService??class com.sap.sdt.j2ee.tools.sdmmanagement.OperateSdmException
i try to restart server and killed sapstartsrv.. but the problem is not solved.
please let me know what i check more?
D:\usr\sap\SOL\SUM\sdt\log\SUM\DEPLOY-COMPONENTS_22.LOG








Apr 19, 2015 3:59:00 AM [Info ]: Stopping SDM server...
Apr 19, 2015 3:59:00 AM [Info ]: AS Java process ID 11 has been started.
Apr 19, 2015 3:59:00 AM [Info ]: Command line: D:\usr\sap\SOL\DVEBMGS00\exe\sapjvm_4\bin\java.exe -Xmx900M -Djava.ext.dir=d:/usr/sap/SOL/DVEBMGS00/SDM/program/lib;D:/usr/sap/SOL/DVEBMGS00/exe/sapjvm_4/jre/lib/ext -cp . -jar d:\usr\sap\SOL\DVEBMGS00\SDM\program\bin\SDM.jar shutdown Sdmguiport=50018 sdmHome=d:/usr/sap/SOL/DVEBMGS00/SDM/program logfile=D:\usr\sap\SOL\SUM\sdt\log\SUM\OperateSDM_60.LOG
Apr 19, 2015 3:59:00 AM [Info ]: Standard out: D:\usr\sap\SOL\SUM\sdt\log\SUM\OPERATESDM_44.OUT
Apr 19, 2015 3:59:00 AM [Info ]: Process ID 11 has been started.
Apr 19, 2015 3:59:00 AM [Info ]: Waiting for process ID 11, name java.exe to finish.
Apr 19, 2015 3:59:02 AM [Info ]: Process ID 11, name java.exe has been finished, exit code 16.
Apr 19, 2015 3:59:02 AM [Info ]: Process ID 11, name java.exe has been terminated.
Apr 19, 2015 3:59:02 AM [Error ]: The following problem has occurred during step execution: com.sap.sdt.j2ee.tools.sdmmanagement.OperateSdmException: Could not stop SDM server.
Cannot execute Java process for stopSDM with parameters 50018.
Return code condition success evaluated to false for process java.exe for action ACTION_STOP.
Best regards..

Could not stop SDM server. Cannot execute Java process for stopSDM with parameters 50018. Return code condition success evaluated to false for process java.exe for action ACTION_STOP
Please follow the solution mentioned in the below link.
Error During Deployment - Java Support Package Manager (OBSOLETE) - SAP Library
regards,
pavan

Album Cover/Title not showing in the List for an Artist with one album.

Hello all.
I have browsed a number of the posts, but nothing close to my particular problem.
I am new to iPod Classic (a couple of months). I like it! Used to be a Creative Zen Vision:M user.
Here is my issue.
I have most of the covers for my albums. Still looking for a few.
When I go to the Artist's menu and pick an artist, if it has more than one album, it shows 'All Songs' and a list of albums with covers, album name and number of songs on a separate screen. You click an album and it shows the tracks, you click a track and away you go. That works just fine.
However, when the Artist only has one album, it does not show the album cover, name and number of songs on a separate screen. It just shows the list of tracks. I would like it to be consistent. I would like to see the album cover/name before I click the tracks to start.
I have worked all my songs in iTunes. I'm pretty sure there is no difference between the one and multiple album artists.
Of course when you click a track to start, the album cover shows on the Now Playing screen.
Is there some sort of setting I might have missed.
Any thoughts on this? What might I try?
Thanks in Advance ...
Bob

Wow!
Is that really so?
I'm not questioning your answer. Just want to make sure before I say OK and let it be. I had heard that iTunes/iPod forces you to do things their way, this is an example, I guess!
Thanks for the input.
I guess I'll just have to leave it be!
Is iTunes the only way to deal with iPod? Are there any other programs?
Bob

T code is not showing up in list of Executable T code for User.

Similar Messages

Maybe you are looking for