T code KANK - Number Range for CO

Dear experts,
When I create CO number range(T code KANK) for a controlling area and do a posting, system takes last document number and therefore I can only post one document at a time.
Example: When I creat number range 1 to 100 and try to do FI posting with a CO object, system will take number 100 as the first document and hence I have to extend the number range again and again. It is ignoring the number range 1 to 99.
I get the message as 'Number interval for transaction COIN in CO area 2000 is exhausted'
Any solution to this problem?
Thank you.
Regards
Paul
Edited by: Paul01 on Dec 12, 2010 8:12 PM

Hi,
Check this post as well.  You may find it useful
CO Document Number range issue
Since you gave CO number range from 1 to 100 and the buffer in SNRO for object RK_BELEG is 100,  you are not able to create any additional CO documents. 
One solution is to make sure you give sufficient number range intervals in KANK in order to avoid this.
Thanks
Ram

Similar Messages

  • Number Range for Logistic Documents For Different Company Codes

    Hi all..
    I need to numbered the logistic documents for diferent company codes (#60) but the number ranges for al those documents should be generated separately according to each CC.
    I've read in other thread that I could use the user exit MM06E003, but it seems that only works for PO. There is also a tweak for GR/GI, but..  any idea for all the other documents?
    Thanks in advance.
    Guillermo (Willy)

    Hi
    using the User exit you can change the Numbers Rnage for the LIV Documents based on the Compnay Code
    LMR1M003 Number assignment in Logistics Invoice Verification
    Thanks & Regards
    Kishore

  • Different number range for recurring docs for diff company code

    Hi,
    We define X1 as the number range for recurring company codes. For 2 company codes, we have given the same number range for X1, 100000-1999999
    Now when a recurring doc is posted for both the company codes monthly, the company codes have same dco number which confuses the user.
    Is there any way to change the set up of the number range like deleting the one existing and starting with the new series
    Any other suggestions are appreciated
    -Vaibhav

    Hello,
    You cannot deleted the number range if it has already been posted, however, you just limit or restrict the upper limit equal to the current number.
    Create a new number for other company code.
    the number ranges are defined at company code level / fiscal year level.
    The number ranges can be year dependent or year independent
    They may be internal or external.
    Regards,
    Ravi

  • Number Range for PO based on company code and document type

    Dear All,
    I've a requirement to assign a separate purchase order Number Range for a company code for the following document types.
    ZNB         Standard PO   
    ZRB         Return PO
    ZUB         Stock transport ord. 
    ZLPA       Scheduling agreement 
    ZLU         Transp. sched. agmt.
    (Number Ranges are different for each of the doc types mentioned above)
    Is it something like I've to create 5 different Number Range objects and then provide the condition in the corresponding user exit , so that the appropriate document could pick its corresponding Number range.
    Does anyone have any specific advice / experience on this , I am new to SAP and please advise me as how to go about this requirement. Thanks !!
    Srinivas G.

    Create the five different number ranges via configuration the configuration for PO.  Usually a user exit is not needed.  You've really posted in the wrong forum.
    There is a lot of work involved in creating a different PO types.  It is usually done in materials management.
    If everything is done:
    In spro go to materials management -> purchase order -> define number ranges.
    Once they are defined they should work automatically or be entered manually depending on how your number range is set up.
    Edited by: Michelle Crapo on Aug 3, 2009 3:07 PM

  • How to determine number range for billing document based on company code ..

    Hi Friends!!
    can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
    Amit...plz help me!!

    Hi Amit,
    1. Define different Billing Document number ranges in  SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
    e.g.
    NO.  From number To Number    Current number  Ext
    A1   0930000000    0930999999
    A2   0940000000    0940999999
    A3   0950000000    0950999999
    2. Define a Ztable ZNUMB_RANGE as follows
    Comp. Code | Tax departure country | Billing Doc Type | Number Range
    100                IN                               F2                      A1
    200                IN                               F2                      A2
    200                US                              F2                     A3
    3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
    Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
    If found pass this number range value to us_range_intern.
    us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
    Let me know if you are clear.
    Thanks,
    Mandar

  • One order type different number range for different company code

    Hi
    I have created one order type. Same order type I extended in another company code (plant).
    I required different number range for another company code.
    Can any give detail solution.
    Regards
    ARK

    Hi,
    In CO82, define groups of order types. Define number intervals and assign number intervals to groups. Organize order types that you want to assign same number interval under groups.
    Regards.

  • How can I setup different number range for each company code?

    Dear GURU,
         Is it possible to setup different number range for material document by company code? If yes, what should i do.
         Thank you in advance.
    Thammarit

    Hi,
    you maintain the number assignment for the following documents:
    material documents
    physical inventory documents
    The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
    The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
    Caution: Change in the Fiscal Year
    If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
    Example:
    Interval for 1995: 4900000000 to 4999999999 status: 4900451234
    Interval for 1996: 4900000000 to 4999999999 status: 4900000000
    If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
    In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
    Physical inventory documents
    Number range interval from 0100000000 to 0199999999
    This group contains the following transaction/event types:
    - IB Physical inventory documents
    - ID Physical inventory documents for counts and differences
    without reference
    - IN Physical inventory documents for recounts
    - IZ Physical inventory documents for count without reference
    - WV Physical inventory documents for difference postings in the WM System
    Material documents for goods movements and inventory differences
    Number range interval from 4900000000 to 4999999999
    This group contains the following transaction/event types:
    - WA Goods issues, transfer postings, other goods receipts
    - WH Goods movements for handling units (HU)
    - WI Material documents for inventory adjustment postings
    - WL Goods issues for delivery documents (SD)
    - WQ Goods movements for usage decisions (QM)
    - WR Goods movements for completion confirmations (PP)
    - WS Goods movements for run schedule headers (PP)
    - WZ Documents for batch status changes
    Material documents for goods receipts
    Number range interval from 5000000000 to 5999999999
    This group contains the following transaction/event types:
    - WE Goods receipts for purchase orders
    - WF Goods receipts for production orders
    - WO Subsequent adjustment of subcontract orders
    - WW Subsequent adjustment of active ingredient materials
    Inventory sampling numbers
    Number range interval from 0200000000 to 0299999999
    This group contains the transaction/event type SI.
    SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
    Note
    For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
    Actions
    Check whether you can use the predefined groups and number intervals.
    If you want to change any groups, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select the transaction/event type that you want to re-allocate.
    c) Place the cursor on the new group and choose Edit -> Assign element group).
    d) Save your settings.
    If you want to define new groups, proceed as follows:
    a) Select Group -> Maintain.
    b) Then select Group -> Insert.
    c) Enter a text for the number range group.
    d) Maintain the number interval for this number range group.
    e) Allocate the transaction/event types to the number range groups (see step 2).
    If you want to maintain new number range intervals for an existing group, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select a group and choose Interval -> Maintain.
    c) Choose Edit -> Insert year.
    d) Maintain the number interval for the new fiscal year.
    If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
    Note on transport
    You transport number range objects as follows:
    In the initial screen, choose Interval -> Transport.
    Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted.
    Thanks and regards
    Rajesh

  • Number ranges for material document (migo) and inventory  documents

    Hi Gurus,
    We need a different number ranges for goods receipt documents  and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
    If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it  is the single transaction code used by different companies and how to give different number ranges.
    Regards,
    Sri........

    Hi,
    I think number ranges of inventory documents are on client level not on company code wise . because even though  your creating new document and assigned different number ranges for the documents but  these while assigning  ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level  not at company code level.

  • Error: Number range  for object RESB does not exist

    Hi
    I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as  follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
    Many thanks
    BE
    Error Msg Text:
    Number range  for object RESB does not exist
         Message no. 61501
    Diagnosis
         The system cannot create a document for an MRP element if no number
         range or interval has been maintained in Customizing of MRP or if t
         number range you have maintained is not allowed.
         Below is a list of MRP elements that are affected:
         Number range object  MRP element
         PLAF                 planned order (operative oder simulative)
         EBAN                 purchase requisition
         RESB                 dependent requirements
         MDSM                 simulative dependent reqmts (long-term plannin
         MDTB                 MRP list
    Procedure
         Check the number ranges in Customizing. If you do not have the necessa
         authorization, please get in touch with your systems administration.

    Hi
    Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
    NR Object                             MRES/DREQ
    No.                          From Number            To Number          Curr Number          Ext
    01                           0000000001               8999999999           380                    blank
    02                           9000000000               9500000000           blank                  checked
    RB                          9500000001               9999999999           blank                  checked
    Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
    thanks
    BE
    Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

  • Number range for Goods receipt against Purchase order

    Hi All,
    Please help me with the transaction code of creating new number range to receive goods for the new year.
    Message is Number range for trans./event type WE in year 2010 does not exist
    SAPXPT

    OMBT click on the groups button, select the
    Material documents for goods movements and inventory diffs.
    WA WE WF WH WI WL WO WQ WR WS WV WW WZ
    And then select the maintain icon, you need to maintain the number range
    for the year 2010.
    ands OMBA for accounting finance doc number range
    hope this helps

  • Not able to created Number Ranges for Asset Classes in AS08

    Dear Friends,
    I am not able create Number Ranges for Asset Classes in AS08.
    It is giving me an error message as company code does not exist.
    When I Check Consistency under path SPRO -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Check Consistency -> Overview Report: Company Codes. I am getting the following
    RSOL  Reliance Sealink One PLtd                                            
    CoCode no. alloc.    NKTR                                                
    Fiscal Year Variant  V3   Apr.- March, 4 special periods                 
    Start 2nd half month 00                                                  
    Transfer date        31.03.2006                                          
    Chart of dep.        TOLL Chart of Depreciation - For Highway Projects   
    Net worth tax        01   Book depreciation as per Compinies Act 1956    
    Enter net book value                                                     
    Status company code  2                                                   
    Current fiscal year  2007                                                
    Doc. type dep. pstng AF   Dep. postings                                  
    > Number range &1 in co.code &2 for doc.type &3 must be defined as internal
    Calc.insur.value                                                         
    Input tax exempt         
    If you see the above first two line you will find the difference is that Company code RSOL in the first line and NKTR company code in the second line.
    Actually CoCode no. alloc. has been wrongly copied as NKTR while copying CoCode it should be RSOL and not NKTR.
    I think because of this wrong allocation it is giving me an error in AS08. Also it is not showing me CoCode in drop down list in AS08.
    Please help me to resolve the problem.
    Thanks
    Rahul Jain

    Look in TC OAOB if the company code is assigned to a chart of depreciation

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Multipe number range for indonesia tax invoice no.

    Hi All,
    I have one question to confirm with you all:
    Our indonesia office need to print out tax invoice when billing document is created.
    The format is TTS.BBB-YY.NNNNNNNN , and only TTS is fixed, the other 13 digits changes.
    And we can only get one number range from tax office for almost one month's usage, which means we can not maintain the number range for one whole year in one time.
    Question 1:  How to maintain mulitple of number ranges for one year:
    I'm thinking if we can maintain different number  in table "V_OFF_NUM_ID"
    2014/01/01 – 2014/12/31  900    ID0114  01
    2014/01/01 – 2014/12/31  901    ID0114  03
    2014/01/01 – 2014/12/31  902    ID0114  04
    2014/01/01 – 2014/12/31  903    ID0114  05
    2014/01/01 – 2014/12/31  904    ID0114  06 
    But the "code 2" is same sometimes, so I have to do so
    2014/01/01 – 2014/12/31  900    ID0114  01
    2014/01/01 – 2014/12/31  901    ID0114  03
    2014/03/28 – 2014/12/31  901    ID0114  04
    2014/01/01 – 2014/12/31  903    ID0114  05
    2014/01/01 – 2014/12/31  904    ID0114  06 
    But if so, I don't know when the billing date is after 2014/03/28, and the number "03" is not used up, system will pick number range of 04 or 03?
    Question 2:
    The revision billing document after reversal must have the same tax invoice no. with the "original billing" & reversal billing"
    The SAP standard use new tax invoice no.
    How to realize it?
    Question 3:
    YY is year and defaulted from billing date?
    Thanks and best regards
    Cathy

    You are correct that this is statutory requirement, and SAP deliver the solution, you can refer to note
    1033737 - Indonesia: Tax Invoice & VAT Reporting 1107 .
    However, from 04/2014, the requirement changes
    TTS.BBB-YY.NNNNNNNN
    Before: Only NNNNNNNN changes and SAP suggest using one number range
    Now: BBB-YY.NNNNNNNN  changes, and there are quite a few number range per each year.
    Can not get one number range for one whole year.
    Therefore, I raised my question as above. However, I think I have answer to my question, just I'm looking for one more perfect solution if there is:
    1> The answer for 1st question
    When the "code 2" is same sometimes, I will maintain as below
    2014/01/01 – 2014/12/31  900    ID0114  01
    2014/01/01 – 2014/12/31  901    ID0114  03
    2014/03/28 – 2014/12/31  901    ID0114  04
    2014/01/01 – 2014/12/31  903    ID0114  05
    2014/01/01 – 2014/12/31  904    ID0114  06 
    By testing, only if the number of 03 is used up even though the billing date is 2014/04/01, the number 04 will be used, so should be okay.
    2> The answer for 2nd question
    The revision billing document after reversal must have the same tax invoice no. with the "original billing" & reversal billing"
    The SAP standard use new tax invoice no
    Since there are only 3-4 reversal per year, so user can realize it by changing the "current number" in J1AB
    You mentioned it in
    http://scn.sap.com/thread/3519329
    but I did not try until I'm sure it will work
    3> YY
    I think it's should be from billing date.

  • Number ranges for PO and GRN

    Hi
    I wanted to define 3 plants in SAP. Can we have separate number ranges for Purchase order and GRN as plant specific. PLs let me know if it is possible through user exits. This number range i wanted to define year specific.
    I have searched for the user exits,but couldn't find any. Pls help

    Hi,
    Separate number ranges for Purchase order is possible if you have separate PO Document type which represents different procurement processes.
    As needed by you ,can control form basis side( by having authorization matrix) for specific PO creation with specific PO document type with a specific plant. For example:
    You have PO document types: NB, ZNB, YNB, FO,UB,ZSNB
    You have three plants... P101,  P102 and P103
    From basis side( by having authorization matrix) allow users to create
    1. To Create PO with ZNB ,YNB and ZNB PO types for Plant P101
    2. To Create PO with FO and ZSNB PO types for Plant P102
    3. To Create PO with UB  PO types for Plant P103
    Also you can configure PO number range W.R.T. Company Code by User Exit,check User Exit M06B0003 & M06B0004.
    For having number range for GR which is WE for year specific, check link:
    http://forums.sdn.sap.com/thread.jspa?threadID=1886173
    Regards,
    Biju K

  • Define Number Ranges for Maintenance Plans

    Dear Friend's,
    At present Maint.plan category PM (Maint order) is not assigned to Group (Maint Plan Number)
    Here i have to define Internal Number Range for Maint.Plan
    How i can assign.Pls guide me step by step.
    Thanks in Advance.
    Regard's
    Sandeep Theurkar

    hi
    Either you can use the existing number by assigning your category to the available group or create your own group and assign the plan category in T code IP20
    in IP20 select the group in change mode ,select your PM category and tick mark the available group and press the element/group button
    or from the menu Group>Insert maintian your own and assign your category
    regards
    thyagarajan

Maybe you are looking for