T-code MB5B Issue

Dear All,
Im having an issue with MB5B (Stock on Posting Date)
The issue is i cannot Sum up for column opening balance or closing balance.
In selection screen, I have selected:
Valuated Stock
Totals only non-hierarchical
Then in Output, when i try to Sum up for Other columns such as Closing Stock, Total Receipt Quantities, Total Receipt values, system is allowing me to do so and the Total Sum will appear in the bottom.
However it does not allow me to do so for Opening Value and Closing Value.
Any way i can get it to Sum up ?
Would appreciate the help guys..

Guys, my bad.
The issue is resolved.
The issue was with the standard layout that my user created.
Once i removed it, I am able to Sum again with the special symbol E

Similar Messages

T code MB5B , the storage location will be reset

dear All,
I want to see stock on posting date of particular storage location with values. When i try T code MB5B and select valuated stock, (it says storage location will be reset). and i used another T code MC.9 and MC49 , but these T codes didn't meet our requirment .
the T Code MB5B , i can see the Material number, Material Description, Opening Stock, Opening Value, total Receipt Quantity, Total Receipt Values, Total Issues QNT, total Issues Value, closing Stock QNT, closing Stock Value.
i need these fields appears but per Storage Location.
Thanks a lot.
Mosab Ahmed Mostafa
Senior Application Consultant
Amer Group
Egypt, Cairo

Hi Mosab,
The system rejects any value entered in the fields "Storage Location",
"Movement Type" and "Batch" if you select the Valuated Stock mode for
the execution of MB5B.
Regarding the Storage Location, the system clears this field with the
message "Storage location will be reset" - Message no. M7284.
As soon as the Valuated Stock mode is selected, the system must remove
the Storage Location. The reason for this behaviour is that there is
not information on material's values on Storage Location level.
- MB5B in the Valuated Stock mode reads the entries from the material
valuation table MBEW of a material and valuation area to get the current
valuated stock and value.
- Then it reads the related MM and FI documents to calculate the stock
and values on start date. A valuation area could be assigned many
storage locations.
The related MM documents can belong to many storage locations.
In the case there are stock transfer postings from plant to plant
the MM documents do not contain a storage location.
So it makes no sense to calculate and display the valuated stocks
and values on Valuation Area level when the number of the selected
MM documents is incomplete. MB5B will deliver wrong results in this
case.
BR
Nadia Orlandi

Performance/ Runtime improvement of T.code:MB5B /Program: RM07MLBD

Hi Guys,
Big Thank ! if you help me out.
Actuallt while running T.code MB5B/ Program:RM07MLBD.it is taking long time to execute.
Could you please advise me
Thanks
Tata

This is a good solution, we have ourselves looked at this and are implementing it on our system.
A work of caution, since changes are made to the MSEG table which is a large table it's advised to work together with the database administrator so that the updating of the table when executing the correction report runs smoothly and you will not be experiencing unforeseen locks which can cause big issues.

Call T.Code MB5B from with in BSP

Hi All
       i want ur's guidance on calling a Report Transaction Code (T.Code) from with in the BSP.
       Like T.Code MB5B is for Stock on Posting date .
i want to call it in BSP with in the frame.
please guide me .
Regards
Sachin

Hi
I have only one restriction that result of call should be with in BSP.
   As u saying if it possible through iview then i can go for this.
I refered some threads by which we r Log-in into SAP then it opening new session of SAP GUI of desired code .
I think i have to use webGUI , first make a webGUI of t.code then call it in BSP , but how to initiate it , i don,t kow that.
Regrads
Sachin

Report Similar to T.Code : MB5B

Hi,
Is there any Standard report that gives the same values similar to T.Code : MB5B.
If there is no such Standard report apart from MB5B that shows stock as on a particular period with the stock movements.
What are the tables that i can use, to build in the same logic.
Thanks in advance!!
Kalyan

You can try standard information system reports like MC.B, or develop custom report based on structures.
If you find something else, please let me know. We also have same requirement, If I find/develop something I will post as well.
Thanks-

T code MB5B

Dear sir,
While using the t-code MB5B for drawing the project stock in particular storage location, on execution the storage location disappears and message flashes "no material contained in selection".
We would like to retreive the stocks in project (Q)storage lcoation on a particular date .Can sapgurus help me.
regards,
k.prem kumar

in t-code mb5b -- in database selection -
only enter material Number , company code & plant don't enter storage location
next one -in stock type -
middle --- valuated stock click
nxt one - in settings - tick on second & third i.e non hierarchy display & matls handled in batches
then execute -
enter - i think definetly you will get stock in stock book
check that stock & also storage location which end user updated in that stock
santosh.

HT201232 Support Subject : iTunes Cards and Codes Sub Issue : hi i want to change my iTunes account from US Store to Kuwait Store and i want to reset My balance.

Support Subject : iTunes Cards and Codes
Sub Issue : hi i want to change my iTunes account from US Store to Kuwait Store and i want to reset My balance.

Try contacting iTunes Support (these are user-to-user forums) and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

T.Code for issues return by the user after month closing

Dear SAPient's,
Give us the transaction facility available in SAP to account the issues
return by the user after month closing.
regards,
Bijay Jha

Dear SAPient's,
Actually I want to know that when the Goods Issued and from that some goods are returned back due to any reason.
I want to know Is there any T.Code from which i can get full details of Goods which is returned after Issuing in one month.
Warm Regards,
Bijay Kumar Jha

One Bank Account used by Multiple Company Codes - BRS Issue

Dear All
We have a scenario where 1 bank account is maintained under different company codes and used for business purpose. In this scenario we are able to do Funds Transfer without any issue. When we are going to do BRS, there is a issue. When we receive Bank Statement, we receive only one statement and when we try to import into system, system will throw the error as system is not able to decide for which company code it has to perform BRS.
Can anybody help me out in resolving the issue.
Rayala

Hi,
For BRS it is impossbile. For maintainig account and all technically it is ok. But it advisable to have different account at least for different company code.
Thanks
Kalyan

Company code creation issue

Hi All,
When I am creating company code I am getting an error as below.
"you may not change the currency since documents exist with this currency"
Above issue is coming while new co code creation or copying of existing co code also.
Please advice on the above issue.
Regards,
Riyaz

Hi,
I hope you are creating new company code by copying from the exiting company code. If you copy one company code to another company code then you will get few pop- up message like do you want to use same chart of account or do you want to use same currecny like that. So may be you have selected different currecny. Sap has come up with country template for each country. So you can use country template to create the new company code.
Thanks & Regards
R.K

Code lookup issue Flash Builder 4 B2

Had this issue before with flash builder 4 beta 2 where the code look up will not work
While working thru Day 4 EX 4.1
"Using code lookup to generate the click event will present you with the Generate Click Handler option in the code lookup window (see Figure 4). Click the option or press the Enter key to use the option to generate a function."
Have no problem seeing the code look up for the <s:Button> however once I get the click will not show code look up for Generate Click Handler window.. is there a way to get this to run.. to move foreward with the exercise I just wrote out the code..is there a way to trigger the code look up?

Mark - so you see click in the drop down and you select it so that your code now says:
<s:Button click="" />
and the code lookup now shows "Generate Click Handler" between the click double quotes?
What happens if you place your cursor between the double quotes in the click event and type ctrl+spacebar?
Can you share a screenshot of what's happening?

Code Insight Issue - SQL Developer 1.1 (1.1.0.23 Build Main 23-64)

Dear SQL Developer Team,
I have a slight issue with the Code Insight.
I have created a package with three procedures
create or replace PACKAGE PACKAGE1 AS
procedure test1 (inpar varchar2);
procedure test2 (inpar varchar2);
procedure test3 (inpr varchar2);
END PACKAGE1;
When I try and reference the procedures in the package code insight only shows two procedures (see this link for the screenshot http://i12.tinypic.com/3zqbuiv.gif)
Any ideas ?
Chris

Sorry Chris, been tied up. looked at this
1. created a PTN table. This is the DDL export of that table. Range partition on date.
-- DBMS_METADATA was unable to use TABLE_EXPORT to generate sql. Now trying to use TABLE.
CREATE TABLE "HR"."TABLE1"
( "ID" NUMBER,
"HIREDATE" DATE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
PARTITION BY RANGE ("HIREDATE")
SUBPARTITION BY LIST ("ID")
(PARTITION "P1" VALUES LESS THAN (TO_DATE(' 2006-12-31 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
( SUBPARTITION "SYS_SUBP21" VALUES (DEFAULT)
TABLESPACE "USERS") ,
PARTITION "P2" VALUES LESS THAN (TO_DATE(' 2007-01-31 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
( SUBPARTITION "SYS_SUBP22" VALUES (DEFAULT)
TABLESPACE "USERS") ) ;
2. Export from Resultset tables in query. As insert statements
REM INSERTING into TABLE1
Insert into TABLE1 ("ID","HIREDATE") values (1,to_date('12-DEC-06','DD-MON-RR'));
Insert into TABLE1 ("ID","HIREDATE") values (2,to_date('21-JAN-07','DD-MON-RR'));
I'm also getting the others working well too. I 'm running the latest version that we are about to release a patch on so it should be good when it comes out.

Profit cebter and copany code configuration issue

i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company
code in profit segment as GB03, but now i am getting as GB01.
is this related to any configuration issue, please let me know.

Hi,
Goto the T.Code KE53.
Enter the Controlling area.
Enter the profit centre.
Click on Company Codes.
Check for which company code the field "Assigned" is ticked.
Please check with your FICO consultant for more information and modifications.
Regards,
Krishna.

ABAP Query Code timeout issue

Hi,
I have a SAP query which was the following code which is causing a timeout issue when running the report, can anyone suggest how I can change the code to make it more efficent?
* This gets the sum of all labour costs on WBSEs.
clear X_COEP_WKGBTR_LAB_W.
if PRPS-OBJNR is not initial.
select sum( WKGBTR ) from COEP
    into X_COEP_WKGBTR_LAB_W
    where
    PERIO = ZPERIODT
    and
    GJAHR = ZYEAR
    and
    KSTAR >= 'A43'
    and
    KSTAR =< 'A43ZZZZZZZ'
    OR
     KSTAR = '0005767012'
    and
    OBJNR = PRPS-OBJNR.
endif.
thanks
Joe

Hi Joe,
I see none of the Key fields were used in select query.
Create a secondary index for the table and use it in select query.
It increases the performance.
COEP~1 and COEP~2 are already existing.
select sum( WKGBTR ) from COEP
    into X_COEP_WKGBTR_LAB_W
    where
    PERIO = ZPERIODT
    and
    GJAHR = ZYEAR
    and
    KSTAR >= 'A43'
    and
    KSTAR =< 'A43ZZZZZZZ'
    OR
     KSTAR = '0005767012'
    and
    OBJNR = PRPS-OBJNR
%_HINTS ORACLE 'INDEX("COEP" "COEP~1").
Thanks,
Anil

T-code MB5B Issue

Similar Messages

Maybe you are looking for