T code MB5B

Dear sir,
While using the t-code MB5B for drawing the project stock in particular storage location, on execution the storage location disappears and message flashes "no material contained in selection".
We would like to retreive the stocks in project (Q)storage lcoation on a particular date .Can sapgurus help me.
regards,
k.prem kumar

in t-code mb5b --   in database selection -
only enter material Number , company code & plant don't enter storage location
next one -in stock type -
  middle --- valuated stock click
nxt one  -  in settings  -   tick on  second & third  i.e non hierarchy  display   & matls  handled  in batches
then execute -
enter -  i think definetly you will get stock in stock book
check that stock & also storage location which end user updated in that stock
santosh.

Similar Messages

  • T code MB5B , the storage location will be reset

    dear All,
    I want to see stock on posting date of particular storage location with values. When i try T code MB5B and select valuated stock, (it says storage location will be reset). and i used another T code MC.9 and MC49 , but these T codes didn't meet our requirment .
    the T Code MB5B , i can see the Material number, Material Description, Opening Stock, Opening Value, total Receipt Quantity, Total Receipt Values, Total Issues QNT, total Issues Value, closing Stock QNT, closing Stock Value.
    i need these fields appears but per Storage Location.
    Thanks a lot.
    Mosab Ahmed Mostafa
    Senior Application Consultant
    Amer Group
    Egypt, Cairo

    Hi Mosab,
    The system rejects any value entered in the fields "Storage Location",
    "Movement Type" and "Batch" if you select the Valuated Stock mode for
    the execution of MB5B.
    Regarding the Storage Location, the system clears this field with the
    message "Storage location will be reset" - Message no. M7284.
    As soon as the Valuated Stock mode is selected, the system must remove
    the Storage Location. The reason for this behaviour is that there is
    not information on material's values on Storage Location level.
    - MB5B in the Valuated Stock mode reads the entries from the material
    valuation table MBEW of a material and valuation area to get the current
    valuated stock and value.
    - Then it reads the related MM and FI documents to calculate the stock
    and values on start date. A valuation area could be assigned many
    storage locations.
    The related MM documents can belong to many storage locations.
    In the case there are stock transfer postings from plant to plant
    the MM documents do not contain a storage location.
    So it makes no sense to calculate and display the valuated stocks
    and values on Valuation Area level when the number of the selected
    MM documents is incomplete. MB5B will deliver wrong results in this
    case.
    BR
    Nadia Orlandi

  • Call T.Code MB5B from with in BSP

    Hi All
           i want ur's guidance on calling a Report Transaction Code (T.Code) from with in the  BSP.
           Like T.Code MB5B is for Stock on Posting date .
    i want to call it in BSP with in the frame.
    please guide me .
    Regards
    Sachin

    Hi
      I have only one restriction that result of call should be with in BSP.
       As u saying if it possible through iview then i can go for this.
    I refered some threads by which we r Log-in into SAP then it opening new session of SAP GUI of desired code .
    I think i have to use webGUI , first make a webGUI of t.code then call it in BSP , but how to initiate it , i don,t kow that.
    Regrads
    Sachin

  • Report Similar to T.Code : MB5B

    Hi,
    Is there any Standard report that gives the same values similar to T.Code : MB5B.
    If there is no such Standard report apart from MB5B that shows stock as on a particular period with the stock movements.
    What are the tables that i can use, to build in the same logic.
    Thanks in advance!!
    Kalyan

    You can try standard information system reports like MC.B, or develop custom report based on structures.
    If you find something else, please let me know. We also have same requirement, If I find/develop something I will post as well.
    Thanks-

  • Performance/ Runtime improvement of T.code:MB5B /Program: RM07MLBD

    Hi Guys,
    Big Thank ! if you help me out.
    Actuallt while running T.code MB5B/ Program:RM07MLBD.it is taking long time to execute.
    Could you please advise me 
    Thanks
    Tata

    This is a good solution, we have ourselves looked at this and are implementing it on our system.
    A work of caution, since changes are made to the MSEG table which is a large table it's advised to work together with the database administrator so that the updating of the table when executing the correction report runs smoothly and you will not be experiencing unforeseen locks which can cause big issues.

  • Copying T-Code MB5B

    I have create a Zcopy for all the includes for Tcode-> MB5B.
    RM07MLBD  ---  ZRM07MLBD
    RM07MLDD  ---  ZRM07MLDD.
    RM07MLBD_FORM_01  -
    ZRM07MLBD_FORM_01
    RM07MLBD_FORM_02  -
    ZRM07MLBD_FORM_02
    There is no problem while I am changing in ZRM07MLBD.
    But if I am writing anything within ZRM07MLDD or ZRM07MLBD_FORM_01 and trying to activate/save the code the system displayed the message like 'Enhancespot will be created for 'RM07MLDD_01' and  'AKTUELLE_BESTAENDE_01' respectively.
    Is it not possible to to modify those above mentioned 2 include according my requirement ? Or I have to use enhancement spot for those Z-include also ?

    Use ehnacement spot to modify the existing code according to ur new requirement.
    I don't think so, u can edit in the 'z' include.
    Hope this answers ur question.

  • T-code MB5B Issue

    Dear All,
    Im having an issue with MB5B (Stock on Posting Date)
    The issue is i cannot Sum up for column opening balance or closing balance.
    In selection screen, I have selected:
    Valuated Stock
    Totals only non-hierarchical
    Then in Output, when i try to Sum up for Other columns such as Closing Stock, Total Receipt Quantities, Total Receipt values, system is allowing me to do so and the Total Sum will appear in the bottom.
    However it does not allow me to do so for Opening Value and Closing Value.
    Any way i can get it to Sum up ?
    Would appreciate the help guys..

    Guys, my bad.
    The issue is resolved.
    The issue was with the standard layout that my user created.
    Once i removed it, I am able to Sum again with the special symbol E

  • Difference in closing Balance qty in Inventory Cube and R3 T-code MB5B

    Dear All
    In evaluations of the 0OIC_C03 Infocube and corresponding reports in R/3 with transaction MB5B/MB51 suggest incorrect data extraction. The difference is in the initial stoock uploeaded . I found transaction in the PSA of 2LIS_03_BX which are not there in the MB5B/MB51.When I run the Query I found a certain qty in the Closing Balance but the same can not be traced in MB5B. The closing balances is the differnce in the qty of Mvt. Type 541 and 542. The closing balance is apearing against the calday but not against the posting date. Moreever the closing balance is apearing against Calday 30/07/2008 whereas we have gone live on 01/08/2008 and uploaded the initial stock on 31/08/2008.
    Dinesh Sharma

    Dear All
    In evaluations of the 0OIC_C03 Infocube and corresponding reports in R/3 with transaction MB5B/MB51 suggest incorrect data extraction. The difference is in the initial stoock uploeaded . I found transaction in the PSA of 2LIS_03_BX which are not there in the MB5B/MB51.When I run the Query I found a certain qty in the Closing Balance but the same can not be traced in MB5B. The closing balances is the differnce in the qty of Mvt. Type 541 and 542. The closing balance is apearing against the calday but not against the posting date. Moreever the closing balance is apearing against Calday 30/07/2008 whereas we have gone live on 01/08/2008 and uploaded the initial stock on  31/08/2008.
    Dinesh Sharma

  • Field in MB5B T-Code

    Hi all,
    I am using T-code MB5B.
    Can please anybody tell me, which table and field using for opening stock?
    here in technical info its showing MARD-LABST but my value doesnt match with table value.
    Waiting for your reply.
    Thanks in advance

    Hi,
    Open stock of a material will be available in the Accounting1 View of the material master.
    Here is some information to find the opening stock of a material in a period. This information will be stored in the tables MBEWH, MARDH, MCHBH.
    As of Release 4.5, stock fields and valuation fields relating to the previous period or to an earlier period are stored in history tables (for example, MBEWH, MARDH, MCHBH), and no longer in those tables in which the current stock data is stored (for example, MBEW, MARD, MCHB).
    These history tables can contain one entry for each period. An entry is created in the history table only if the stock-relevant data or valuation-relevant data changes. The value of the entry relates to the end of the period. The history tables do not contain any entries for the current period.
    Example
    Scenario
    At the start of period 02, there are 10 pieces of material 4711 in stock.
    Goods receipt
    5 pieces are received in period 02.
    System response
    The system records a stock of 10 pieces in the history table for period 01. At the same time, the system increases the current stock to 15 pieces.
    Goods receipt
    2 more pieces are received in period 02.
    System response
    The history table is unaffected by this event because an entry already exists for period 01. The system increases the current stock to 17 pieces.
    Goods issue
    4 pieces are withdrawn from stock in period 04.
    System response
    The system records a stock of 17 pieces in the history table for period 03. At the same time, the system reduces the current stock to 13 pieces. (The history table does not contain an entry for period 02 because there were no goods movements in period 03.)
    Rules
    If the history table does not contain an entry for the previous period, the values for the previous period are the same as those for the current period.
    If the history table does not contain an entry for a period n that precedes the previous period, the values for period n are the same as those for period n+1.
    Since the second rule can be applied recursively, it is possible to determine (in accordance with both rules) the values for any periods as of the period in which Release 4.5 or a subsequent release was implemented.
    Rgds,
    Prajith

  • Mb5b t.code

    Hi friends,
    i want to add material group in selection-screen. of t.code mb5b.
    (means In input area).
    And also want to display output according to material groupwise.
    i alsready converted standard program into  Z programm but i don't find where they r selecting data which is display in output.
    I also don't find internal table.
    So how can i add material group?
    so plz send me reply its argent.
    Thanks in advance.

    I don't ask for making transaction code i want how to add material group field in input and output.

  • MB5B report in column structure

    Hi All,
    Can you suggest me a report where I can get the details as mentioned below in tabular format for a specified period? (i.e.  Suppose in November month we want to get the detail for the month of April the opening and closing stock along with the value.)
    Plant      Mat Code   Mat Desc.   Open. Qty     Receipt    Issues   Close.Qty   Value.
    I checked with MB5B, but it does not provide us the details (as above) in tabular formatu2026u2026
    If no Stand transaction is available, then do suggest from which table I can get these details to develop u201Czu2019 report or write a query.
    Do suggest.
    Regards,

    Hi,
    Using T-code MB5B - Stock on Posting Date, the following input data to be given as follows.
    Company Code : ______
    Plant : _______
    Storage Location : ______ if required to be selected
    Selection Date : _________ to ___________ (01.10.2010 to 31.10.2010-report required period to be mentioned)
    Stock Type - selected Valuated Stock
    List of Scope click category and following options to be tick marked
    With Opening Stock Without Closing Stock
    With Opening Stock With Closing Stock, Changed
    With Opening Stock With Closing Stock, Unchanged
    Settings - Totals Only - Non Hierarchical Representation Layout /ZMB5B tick marked
    The above input data given & options are tick marked, Executed the report shown opening, Receipt,Issues,Closing stock, UOM, Opening value, Receipt Value, Issue Value, Closing Value, Currency in columnar (like Excel tabular format).
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • MB5B - Stock on Posting Date, Specification for data base accec

    Hi,
      I am facing some problem with MB5B Transaction as when we login with t. code MB5B  at the bottom of screen there is radio button selection for specification of database access for best runtime and the default the first radio button is selected i.e Database determines optimum access    but with this report is coming very very slow we have to wait for 4 minuts for each material  and same if we execute by selectting the second radio button i.e start off with material number  i am getting data very fast  with in 5 second  so i want to know what is diffference between these radio buttons if we select first second or third radio buttons
      one more thing we are facing problem from last 4 days only .
    regards,
      zafar

    I dont have these 3 buttons in my MB5B in ECC6 system.
    But I saw OSS Note 1005901 - MB5B: Performance problems
    it explains why it is that slow.

  • Material Stock is not Updated in T.Code MC.9

    I am running Material stock report in T.code MB5B it is showing the correct stock report but when i execute T.code MC.9 (Material Analysis) it is showing difference of Rs 96015 This difference is whatever  transaction we have made in Movement type 121 it will not get updated in MC.9.
    Can anyone  having solution of this.
    Thanks
    Kalpesh

    If lot is in SKIP status then stok posting tab will not appear. You need to find out DMR rule which is causing SKIP status.
    You can easily check this in QDL3 or you can do one thing. Go to QDL2 and change next stage as "100 - Inspect" so system should create next lot as inspection. You would be able to do RR & UD.

  • Variance in MB5B and MMBE / LS26

    Hi There ,
    The stock on Posting date ( T Code - MB5B ) shows zero till today, where as the Stock overview MMBE / LS26 shows the correct figure as required .
    Could anybody throw some light regarding what exactly is the logic behind the MB5B report . To my understanding MMBE / LS26 should sink with each other .
    Thanks in advance for your kind help !!!!!!!!!
    With Warm Regards
    Manoj

    Hi All ,
    Thanks to all of you for your kind and quick reply .
    As per the request from Anand ..The MB5B shows stock received as well as stock isssued till 12-12-2006 is same , so the stock available is zero . but on the same date 12-12-2006 System allowed to do Transfer Orders with a quantity ...my presumption is that if the stock in MB5B on 12-12-2006 is zero then how System allowed to do a posting of TO with a quantity ..
    MB5B I believe includes the unrestricted stock ..
    Kindly assist ...thanks again in advance for your kind help .
    Best Regards
    Manoj

  • How to add a new column in a standard transaction mb5b

    Hi,
    In t-code mb5b, there are columns which describe the material description, material , opening stock , opening value, etc. I have to add a column with the field name "opening rate". Values for opening rate are calculated using the formula
    opening rate = opening value / opening stock.Please help.

    Hi
    if you want to add a new Column in the Standard transaction you need to create a copy of program RM07MLBD. Add your field in the end of STYPE_BELEGE, Populate the text for field in FieldCat and in the end Populate the value by doing calculation on each row and modifying the table.
    Rajnesh

Maybe you are looking for