T-Code.. MCTE Sales report
Hello All,
Can anyone give me the details about the MCTE report.
There are three output fileds INCOMING ORDERS, Total Order Qty and SALES.
How the incoming orders calculated and how the Total Order Qty coming, and how the Sales figures calculated in this report....possible give me some example.
Thanks in advance,
just give me the idea of how they calculating the net sales and net incoming orders
Edited by: pratap mandapati on Mar 5, 2008 10:53 PM
Similar Messages
-
T-code or SAP Table Sales report based on Document Pricing Procedure
Hi Experts,
Please suggest me some SAP Standard T-code or Sales Report based on Document Pricing Procedure and Sales Area.
Or suggest me SAP Table for the above mentioned combination. Thanks in advance.
With Best Regards,
Bharat BHi
There is no standard t code available. You have to go for Zee using the below tables
first you need to get the VBAK-KALSM(Pricing procedure)or VBRK-KALSM next you have to pass the VBAK-KALSM to table T683V-KALSM(field) now you will get all the Document Pricing Procedures (KALVG) assigned to these pricing procedures along with sales area.
So using these tables you can get the required data.
regards
Prashanth
Edited by: Prashanth@SD on Jan 18, 2011 7:58 AM -
Sales report per year for copmany code & sales org wise
Hi all
Does anybody knows how to take total sales report per year for copmany code & sales org wise
Please advice me with Tcode if it's possible.
Thanks a lot in advance!
U.mahaHi,
Check your configuration for SIS.If it is not there maintain settings for SIS.
SPRO-Logistic Information system-Updating-Updating control-settings:sales
You also need to run these T-codes. OLI7,OLI8,OLI9
(Test first in quality client).
Thanks,
Vrajesh -
Need code for sales order create report using bapi's
need code for sales order create report using bapi's
Hi,
Go through below link
http://www.saptechies.com/bapi_salesorder_createfromdat2/
<b>Reward points if it helps,</b>
Satish -
Report for Sold to Party code against Sales order number
Hi,
Is there any standard report to take out the Sold to Party code against Sales order number as i have the sales order number.
I don't want to use Tables ,so pls tell standard report if any.Dear Monty garg.
You can use u201CVA05Nu201D to find the sales orders which have been created against for the particular customer/sold to party.
Please let me know if any further clarifications pertinent to this.
Thanks&Regards
Raghu.k -
Dear Friends
When I am using stand Sales Reports in LIS (MCA,MC(A, MCA, MC+2 ) I am getting report when I have entered only Date but not with customer or Article.
I am getting Error that "No data exists for chosen selection"
I have maintained Customer statics group as well as Material statics group in customer & material Master respectively
Even I have assignments in OVRP and OVRO what need to check to get the report.
Regards
sudhaSudha,
Hope this helps you.
Transaction Codes for Standard Reports used in SD Module.
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22 -
Sales Report for US Sales and Use tax
Hi,
I'm looking for t-code to extract detailed sales report having Gross sales, Exempt sales , Ship to state, Ship to County\ City, Sales Tax collected. If I'm getting this report i can verify what my sales tax software is updating.
When i extract tcode - ZINVLIS i don't get much detail.
Please help me in extracting complete sales detail which can be used for sales and use tax verification process and audit purpose.
Thanks,
KarthikHi Karthik,
There is no standard report available as per my knowledge.You may develop Z report to achive your requirment. Check some LIS report can give data (MC01 is transaction where you can check all type of key figure reports)
Regards
Mani Kumar -
SALES REPORT (Credit memos Subtracted)
Hi all,
I would like to come up with a detailed Sales Reports that shows the Quantity and Value of items sold per day (AR Invoices) excluding the credit memos. I later want to use the same query in crystal reports. I came up with the below query; the select statements are executing individually but using 'UNION ALL' I am getting a 'Conversion' error.
SELECT T0.[CardCode]Code, T4.[SuppCatNum]cat, T4.[FrgnName]frn, T1.[Quantity]InvQ, T0.[DocTotal]InvT,0 MemoQ,0 MemoT FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry full outer JOIN OSLP T2 ON T0.SlpCode = T2.SlpCode full outer JOIN OUSR T3 ON T0.UserSign = T3.USERID full outer JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE (T1.WhsCode='MLO01' or T1.WhsCode='ARG01') AND T0.DocDate=[%0]
union all
SELECT 0 Code, 0 cat, 0 frn, 0 InvQ,0 InvT, T1.[Quantity] MemoQ, T0.[DocTotal] MemoT FROM ORIN T0 INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry full outer JOIN OSLP T2 ON T0.SlpCode = T2.SlpCode full outer JOIN OUSR T3 ON T0.UserSign = T3.USERID full outer JOIN OITM T4 ON T1.ItemCode = T4.ItemCode WHERE (T1.WhsCode='MLO01' or T1.WhsCode='ARG01') AND T0.DocDate=[%0]
kindly assist refine this query or come up with a better one altogether. Thank you.Hi,
Try:
SELECT T0.CardCode Code, T4.SuppCatNum cat, T4.FrgnName frn, T1.Quantity InvQ, T1.LineTotal InvT,0 MemoQ,0 MemoT
FROM OINV T0
INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN OITM T4 ON T1.ItemCode = T4.ItemCode
WHERE (T1.WhsCode='MLO01' or T1.WhsCode='ARG01') AND T0.DocDate=[%0\]
union all
SELECT '', '', '', 0,0, T1.Quantity, T1.lineTotal
FROM ORIN T0
INNER JOIN RIN1 T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN OITM T4 ON T1.ItemCode = T4.ItemCode
WHERE (T1.WhsCode='MLO01' or T1.WhsCode='ARG01') AND T0.DocDate=[%0\]
Thanks,
Gordon -
Syntax error while creating tax codes for sales n purchases
Hi all,
While creating the tax codes for sales and purchases, i got the below error:
Report RB13A003 has a syntax error.
What should be done?
Thank youHi,
I believe, it's RV13A003 report and not RB13A003... What is the exact error message (or is it a dump)?
Regards,
Eli -
Intrastat / EC sales reporting for Italy
Hi all. We have implemented a new company code for italy. Business is now requiring several country specific reporting, namely the intrastat and EC sales reporting. I tried going through some documentation but there are several reports available for intrastat, so i am not getting the whole picture or which report(s) i should be using. Does anyone know the sap note which describes the full intrastat reports or have any similar documentation?
thanks in advance for your help.Hello Simon,
The below documents might be helpful to you,
http://www.scmexpertonline.com/downloads/Kees%20Intrastat%20download%201-23-07.doc
http://www.appliconsolutions.com/fileadmin/filer_solutions/pdf/White_paper/White_Paper_APM__v._2.9.pdf
http://mbs.microsoft.com/downloads/public/GP10Docs/EnhancedIntrastat.pdf
This is the last one for oracle,
http://download.oracle.com/docs/cd/A60725_05/pdf/gemmsin.pdf
br,
Pushkar -
Hi Experts,
I need your help in following topic. I have a requirement to build a big (overall) sales report in BI (NW2004s).
I would like to use BI Content because I'm running out of time and try to use all preconfigured stuff if possible.
In the requirement a bunch of fields of different SD DataSources are used (mostly 2LIS_11_VAHDR and 2LIS_11_VAITM but also some fields of other Datasources).
In SE16 I know how to locate all the field in the tables VBAK, VBAP, KNA1, VBKD,
LIKP, VBRK and of course some texts. Some fields could already be located by me, others couldn't even be found in BI.
The difficulty I have is to bring all the DataSources together so that the data is displayed correct - even if there are redundant parts.
For example:
For sales orders the doc no, sales org, distr. channel (and a lot of other header data) should be displayed in each line together with item data such as item no., material code, quantity (and a lot of other item data). If an order has multiple items each item should be diplayed in one row in the report.
In the Query the report should look like a common table (e.g. as in an ALV Grid if you model a query with SQ01) --> a lot of columns.
I'm not sure if I should use one big DSO with multiple InfoSources or if I should create a MultiCube and add the BI DSOs 0SD_O03 (Orders) and 0SD_O01(Order Items).
I know this is a very common requirement in SD. Do you know how to combine the most common SD datasources that no issues come up?
Thank you very much in advance,
Horst
Message was edited by:
Horst HenkelHi Horst,
Reporting on ODS / DSo is slow. I'm here at a cleint where we have lots of reports on SD_O01 and SD_O03. The best way to have good query performance is to build cubes on top of your ODS. Build a sales cube on top of SD_O03 with all fields and a billing cube on top of SD_O01. Load the data from your ODS to your new cubes. Then create a multipovider on top of both cubes, identify the keyfigures and characteristics required for your queries. Build the queries on top of the multiprovider.
You can display all items of a bill in one row if you choose drill-across for the irems in the query, instead of drill-down. So it looks for a standard SD report.
Regards,
Juergen -
hai,
i m working on sales report where in i need to get month wise sales of the products and the related cost incured to company by the sales in the matrix form as shown below can u help me in which way can i get this monthly report
march april may june july......feb
mtrl 25 30 0 19 23 ........(mtrl quantity)
cost 30000 15000 0 45000 ..........(amt in rs)
where in the above i m able to get yearly sales in one column (i.e i m able to show for one particular customer total sales in one column) but i m unable to split sales monthly and unable to show in a report so how can i able to sow in this matrix formDear Raj,
Please find the code for monthly wise report in PA0001 Table for calculation of Administrator time Recording.
http://scn.sap.com/message/14216250#14216250 -
Sales employee wise sales report
Hi,
Can anyone explain me,how to write functional specifications to obtain sales employee wise sales report?
Thanks in advance..
Regards..
Yogi...Hi
This is the standard T Code for sales employee-MCTI
But as per your requirement we hv to create.
Examplemy past implimantation..we hv captured sales employee as partner function.sales employee1& 2 with peoper partner determination proceture.then we hv captured at Billing document Header Partner function.
This Sales employee name has to captured through HR Master data.According U hv to say only the business process and from where data has to captured to ABAPER.
I think it ll help
Regards
JAGA -
Sales Report w.r.t. District wise
Hi expert
Can i get sales report w.r.t. District wise in SAP by any t.code like VA05
or it need to develop from table and field
thanksHello sir
If you have created new sales districts and assigned them in CMR then you have to do some sales transactions in those sales districts now
Then only those values will be picked
The sales happened previously will not come
Recently for a Retail client we had to develop this MCG3 report
Initially it was giving us the message of LIST contains no data or no data exists for this selection
We have to give only sales district in the selection no sales org no distribution channel and no date nothing to be mentined selection list
Then the values are picked perfectly
You can use drill down option in the initial scereen and switch drill down in the subsequent screen which was opening
Please log of and relog and see
Definately values will be picked
Regards
Raja -
Sales Report Material Group-wise
I want to generate Sales Report Material Group-wise is there any standard report.
regards,
RajeshHi
Use the T.code: MCBK, this report tells you about Total stock received, total stock issue for sales order against the material group.
Reward if it helps
Regards
Prasanna R
Maybe you are looking for
-
Have just loaded IOS5 but creates an error in iphoto which quits when using icloud, if I untick photo sream in icloud it works ok again. Have also IOS5 installed on ipad2 & iphone4. Any ideas?
-
Commercial invoice is missing hoew to find
Dear SAP Guru's One commercial invoice no. is missing,no where it is available.User has created exice invoice for that particular delivery no. in J1iin,but he has not created commercial invoice no. for that delivery no. But further he has creeated an
-
I need help with my iphone 3gs?
-
Advantages of Distiller over program entry to a PDF?
I have read where Adobe currently recommends that the suggested way of making a PDF is going through the individual programs (ID, IL and PSD) to make a PDF. What would be an advantage of utilizing Distiller to get into the settings? Thanks.
-
Install CS6 Master Collection Windows 8.1 Update 1
I'm currently creating a new custom image to deploy to all our computers in our school. We create our image using a hyper v virtual machine then use MDT to capture and WDS to deploy. The first step in our process is to ensure all windows updates are