T-code ME23N message when trying to send PO via IDOCS to another system?
Hello MM Experts,
I am not sure if my question is more for ABAP guys , but since it is MM related I decided to share it with MM experts as well.
I am getting wired message what I am trying to send PO via IDocs to other SAP system (XI)
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby<b></b>
Hi Boby ,
TRY going thru this link and check for the details given in it wether they are in place or not specially in the message controls, viz: application EF ,message type NEU and process code ME10
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm
regards
kp
Similar Messages
-
ME23N Error when trying to send PO via IDOCS to another system?
Hello Experts,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system (XI)
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
Boby<b></b>I just got the same problem. Everything worked fine when i was using message type ORDERS01, but when i changed it to ORDERS05 this problem started happening.
This might solve your problem. If you have it solved out can you tell us the solution you found??
regards,
Diogo -
Error message mes when trying to send PO via IDOCS to another system?
Hi Abap expert,
I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
'No communication data has been defined for transmission medium 6'-----
The LED on "PO:output screen' is YELLOW and never gets green.
Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
Thank you much eveyone!
BobyHi,
Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
Hope this is the error you are getting.
Thanks
Manju -
ERROR MESSAGE WHEN TRYING TO SEND IPHOTO VIA E-MAIL
DRIVING ME NUTS, CAN ANYONE ASSIST? TRYING TO SEND PHOTO'S FROM MY IPHOTO ACCOUNT VIA E-MAIL KEEP GETTING SERVER DOES NOT RECOGNISE ACCOUNT/PASSWORD MESSAGE. ALSO I-CLOUD ACCOUNT REFUSES TO ALLOW ME TO SELECT MAIL FROM MAIL, CONTACTS & CALENDARS PREFERENCE
THANKS
TEDFirst unlock your caps lock key. Typing in all caps is inappropriate in online forums (considered shouting) and is hard to read.
iPhoto>Preferences>General. Select the email program or how you wish to email photos from iPhoto.
(There is an iPhoto forum for iPhoto questions). -
Transfer Failed message when trying to send pics via bluetooth
I used to have no problem sending pictures from my LG Vu to my Macbook Pro via bluetooth but ever since I sent my Mac in for repair and got it back from apple it no longer does this. Both the phone and my Macbook will connect and the download will start, but then my Macbook disconnects and I get a Transfer Failed message on my screen. If anyone knows how to fix this bug I would greatly appreciate it. Thanks.
Try deleting your Bluetooth set up and re-doing as if it was from the beginning.
-
I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any...
Only found one question similar and NO ANSWER to it.Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?
-
I am trying to remove iCloud 2.1.1.3 and I get an error message "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2343." After I click "OK", it gives me the message "Fatal error during installation." How do I fix the error? What to do?
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/erro r-code-2343-message-when-trying-to/996dc521-9a03-4914-b2f6-dbf2b5293730
-
Keep getting a failed message when trying to send sms to UK mobile
Why do I keep a failed message when trying to send a SMS to UK mobile
That would be a good place to start since SMS is strictly a carrier feature.
-
Error message when trying to open windows7 via vmwarefusion.
error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck. -
Getting strange message when trying to send in a web mail. can you help
I work for a ISP and one of our customers was having trouble with their webmail. she was getting this message when trying to reply to messages.
http://mail.e-isco.com
Message Not Sent!
Following sender has not been
Accepted:
“cece778”<
Does anyone know what might be going on with it. she is using an ipad2. has this problem wether she is on her 3g or on her wifi at home. Her webmail works fine from the computer just not the ipad.I am getting an error message when I try to open an attachment to an email entitled movie.avi. It says I may need more software but its not a helpful message because it does not say whta software. Lame and frustrating.
-
I am receiving an error message when trying to send an email.
I recently had to change my email password. Now when trying to send or forward a message on my Iphone 4s I am receiving an error that my user name or password is incorrect. My phone service is through AT&T and email is embargmail.com.
Where did you change the password? Did you go into the email account on your phone and change the password as well? You need to check your SMTP settings, as that is what controls sending mail. If you get an error when trying to receive mail, that is the incoming server.
-
when trying to send emails on my Iphone i get the message
email rejected by server because it does not allow relaying
can anyone help me with this problemGo into Settings>Mail, Contacts, Calendars>your account>Outgoing mail ServerSMTP>Primary Server then turn Server ON and fill in both User Name +Passwordunder Outgoing Mail Server.
-
Error message when trying to send a picture message (multimedia)
I am unable to send picture messages and receive "Can't send message right now. There are too many unsent multimedia messages." I tried to upload pictures to print thru the Walgreens app, after becoming frustrated with the application I canceled the upload. I've been having trouble sending messages ever since. I've tried to clear all running applications in the Task Manager, and checked the Multimedia message limit through my Messaging Settings and increased the limit. I can't figure out how to clear the unsent multimedia messages, can anyone help? Thanks!
Was your 3G data connection active when you were trying to send the pictures? Have you tried to send picture to yourself? Dial *228, option 1 to reprogram the phone to the Verizon Wireless network?
-
Why am I getting error message when trying to send attachments?
I am having a time sending attachments, and most of them have been jpeg, with Safari. After a time when I push "send", I get a message that "Safari cannot open the page". It then says" "lost network connection" (NSURLerror Domain-1005")
How can I correct this, please ? Is there anything I haven't done to prevent this? I am fairly new to the Mac OSX, and still learning .....thanks !!!
This has happened when I have scanned something and then tried to send it, or just tried to send something that was downloaded from my Manager to my desktop...I am "wired" and at home when this occurs. I actually sent some things...saved to my desktop, and attached them to a letter I sent my Sis, and she got the pictures that way. I was surprised she got them, as it still said that Safari could not open the page and then it gave me the same message about "lost network connection: INSURErrorDomain-1005.
-
SOFFICEINTEGRATION 898 error message when trying to send excel file to
Hi,
I am trying to send excel file from sap dp planning book using macro with document function to outlook mail.
when i am running the macro online its sending the file to my mail
but when i am scheduling a background job and executing its giving me SOFFICEINTEGRATION error 898
can you please help?
do i need to do any setting any where
ThanksHello,
Programs that run in the background cannot address controls on the frontend. This is why you are not able to run a Program using SAP Office Integration which is a Frontend Control and can be used only with the SAP Gui. Since background process cannot make use of UI screens or actions hence it's not possible use SAP Office Integration in background processing. The reason for this is explained in note 674060. Therefore sending emails using a batch macro is not supported.
Best regards
Rico Frenzel
Maybe you are looking for
-
Where do i go from here i do not know what to do as i have been trying to contact the person i bought it from but they have given me no reply i need advice on how to get this problem solved, i do have the email confirmation is that enough to get appl
-
HT1267 why can i rip a cd but cant put it in my iphone 4s,with windows 7
when i rip i cd i cant sync it to my iphone4s or any songs unless i purchased them. these are not burned cds i pay for all my music.
-
Supplier Processing Lead Time with ASCP Unconstrained Plan
Hi All, Is it possible for unconstrained plan to consider supplier lead time constrained which we define in ASL? I have defined an Unconstrained Plan & the plan is not considering Item Level , ASL Lead times & generating the planned Orders to meet de
-
Any Difference on synchronize whole and parts?
I want to know any difference between two codes: Code 1 public class Client { private Model model=new Model(); public synchronized int getId() { return model.getId(); public static void main(String argv) { Client c=new Client(); Sys
-
REUSE_ALV_GRID_DISPLAY standard data validation routine
I am using REUSE_ALV_GRID_DISPLAY to display data from a custom table and allowing users to edit some fields. When the save button is clicked SAP automatically validates some data fields (for example MATNR) and alerts the user if there is an error. T