T CODE OF DIVISION AND DISTRIBUTION cHANNEL
Hi All,
I want to know the T code of division and distribution channel.
Rgds
Abhishek
SM30->
1. CRMV_DISTCHAN_MD - distribution channels & CRMV_DIVISION_MD - Division
2. CRMV_DIVICHAN - Divi - Distribution Chanel
Spro Path : spro->CRM->Master Data->Organizational Management->
Similar Messages
-
How to know Sales Organization and distribution channel for a material
How to know Sales Organization and distribution channel for a created material
Hi,
For a single material means u can go mm03 7 select the material number 7 select the sales views then press f4 the details u can see.
For any number of materials u can go to se11 & give table name MVKE then select the required parameters & execute.
pandari -
Assignment of plant to sales organisation and distribution channel
Hi,
What is the use of assignment of plant to sales organisation and distribution channel.
thanks
KuntlaHi Kuntla,
Please don't get offended. Your explanation is purely irrelevant. If I don't want to record from which plant the material has been sent and hence if I don't make the delivering plant assignment - what will be result. Can I create the sales order and make delivery. Is it possible. This is one of the important assignments in SD configuration. I don't find fault in posting your reply. It is only for your response to others' replies to the thread. You can do this to their personal mail ids. Otherwise this will become a practice in this forum. Please take this in a positive angle.
Thanks,
Ravi -
Get plant from sales org and distribution channel
Hi expert,
how to get default delivery plant from sales organization and distribution
channel.
thanks,
neothanks for your quick reply,
i saw table tvkov which has field vkorg,vtweg
but in tvko i found vkorg only .
i don't get vtweg in tvko table,
can u tell me which two condition i need to use ofr join,
one is vkorg and the other one (?) i don't get it.
thanks,
neo -
Referenced sales org. AA00 and distribution channel do not exist
Hiii Driends,
I have came across a problem while Assigning Sales area to Sales doc type.....
Steps i have followed:
1. Created and assigned all Enterprise Structure
2. Set up Sales area (AA00/A1/A0)
3. IMG-SD-Sales-Sales Doc -Header-Assign Sale Area to Sales Doc type-Combine Sales Organisation. This is done succesfully.
But while doing 'Combine Distribution Channel' when I enter Ref Dist Chnl as A1, Error is appearing as "Referenced sales org. AA00 and distribution channel do not exist"
Can u sugest me any solution???
Regards,
AbhiHi Abhi,
If the referenced distribution channel is not assigned to the sales org of sales line which you are trying to refer....Message will be coming as you said...
Please check whether you are referencing a distribution channel which you have assigned to your sales organization or not...
Hope this helps you...
Reward points.
Regards
Guru -
BAPI to get customers filtered by sales org and distribution channel
Hi there,
I'm writing a little portal web-app on an MS platform to allow externals to place orders directly. I have a problem that I need to get a list of customers (for ship-to) that is filtered by the same sales org and dist chan as my sold-to company and BAPI_CUSTOMER_GETLIST doesn't return this info for filtering. What options do I have?
Many thanks,
AshleyHello,
Create custom RFC function module.
Use table KNVV to get your customer list based on sales org. & distribution channel.
Regards,
Sameer -
How to extend CMIR to new sales org's and distribution channels
Hello,
i need to extend existing CMIR's to new sales org's and disttibutiion channel combo's, i have about 24000 records that need to be extended to around 300 new sales org's and disttibutiion channel combo's.
is there a way to do this without having to do a lsmw recording.
Thanks,
Zairhi,
please follow LSMW:
Recording VD51 VD
VD52 Maintain Cust-Mat.Info w/Select.Scrn
RV10A001 1000
BDC_CURSOR KUNNR
BDC_OKCODE =ONLI
KUNNR 2000004531
VKORG GB20
VTWEG 99
RV10A001 1000
BDC_CURSOR KUNNR
BDC_OKCODE /00
KUNNR 2000004531
VKORG GB20
VTWEG 99
RV10A001 1000
BDC_CURSOR KUNNR
BDC_OKCODE =ONLI
KUNNR 2000004531
VKORG GB20
VTWEG 99
SAPMV10A 0200
BDC_CURSOR MV10A-MATNR(01)
BDC_OKCODE =SICH
hope this clears your issue
balajia -
Which is the best practice of creating distribution channels and divisions
actually my company has 11 plant and every plant has differnt type of finished goods
the sales is gone on order ,its exported and its given to distributers
the goods are totally based on order and one product is dedicatedly going to one customer
so in this way what should be the stretegy to creat division and distribution channel.hi,
just to add, since the type of products if they are totally different in nature better you create that many divisions. But a customer might be buying all of those are some of those. So, use common divisions concept. You might as well need to use the common distribution channel since you have exports and tomorrow see a situation for domestic sale. There can be different type of customers in domestic.
so having few distribution channels helps. But, this depends on the project scope.
but basically you are doing only export. Can go ahead with one distribution channel.
But remember building up enterprise is the most critical thing and has to be done after a great deal of analysis keeping in view the project scope.
Hope it helps.
Thanks
Sadhu kishore -
Mass change of Distribution Channel
Hi,
I want to update Distribution channel field as 10 for all Finished material....
is there any way to upload those materials at a time...
i cant do it using LSMW upload....
and i tried using MASS, that is also not possible...
Regards
smithaHi ,
using BAPI's you can create this,
goto SE37 and give bapi name as 'BAPI_CUSTOMER_CREATE' clik on execute, then give your file name in destination,file which contains only customer number ,sales org ,division and distribution channel,you can extend that customer to that distribution channle using that.If you are not aware of function module take help of an ABAPer.
Please let me know if you still need any more help.
Thanks and regards,
Rajeshwar -
Adding new distribution channel
Hi,
I added a new distribution channel and added the relevant divisions,. Also set upd the sales areas. It picks correctly when trying to create the sales order.
but when i try to create a material in this new sales area if t gives a error sayin invalid sales area in the material master creation.
could there be any setting i could have missed? appreciate ur help on this.
Thanks
KeshiniDear Keshini,
Please do the settings for common divisions and distribution channels through VOR1 and VOR2 transactions.
Then try,
I hope this will help you,
Regards,
Murali. -
Common Distribution Channel and Divisions
<b>How to configure Common Distribution Channel and Divisions and what is the advantage of the same?</b>
dear sunil
distribution channel
If you do not need the master data (customer / material and condition master data) to
be differentiated according to distribution channels, you have to set up a representative
distribution channel. The master data for the representative distribution channel
applies to all distribution channels for which you have set up this reference in
Customizing.
By doing this, you can minimize the effort of entering and maintaining master data.
In addition, you can update statistics for distribution channels without having to create
master data for the various distribution channels.
Division
T.Code: VOR2 -- Sales and Distribution  Master Data  Define Common Divisions
If you do not need the master data (customer or condition master data) to be
differentiated according to divisions, you have to set up a representative division.
The master data in the representative division applies to all divisions for which you
have set up this reference in Customizing.
By doing this, you can minimize the effort of entering and maintaining master data.
In addition, you can update statistics for divisions without having to create master
data for the various divisions
rewards if it helps
siva -
Use of common distribution channel and division in CRM
Hi,
I have a requirement where the customer master will be created in a single dist channel and division combination in ECC and downloaded to CRM. However this customer will be used in different sales area combinations in CRM and ECC.
In ECC there is as standard setting wherein we can refer a sales area to other sales area.
Do we have any such functionality in CRM?
I went through posts and even tried to run Transaction CRMD_DOWNLOAD_SB and CRMD_DOWNLOAD_OM but the tables were not populated in CRM.
For information we are creating the org structure in CRM itself and not generating it from ECC.
Regards,
PPdear PP,
first, you can have a look the relevant master data division and distr. channels settings in config
here are the paths for CRM 7.0 system config (might be a bit different for previous versions):
spro->customer relationship management->master data->organisational management->division settings
spro->customer relationship management->master data->organisational management->organisational data for sales scenario
and second, the Assignment of Organisational Units from SAP ECC (same CRM spro config):
spro->customer relationship management->master data->organisational management->Assignment of Organisational Units from SAP ECC
please do not forget to check out the Data transfer (just one node lower) : Copy SAP ECC Sales Structure
t-code CRMC_R3_ORG_GENERATE
good luck!
regards,
PPIO -
Get Sales organisation and Corresponding Distribution channel and Division
Hello,
My requirement is to is to retrieve Sales organisation and Corresponding Distribution channel and Division.
Was going through the thread : [sales organization and distribution channel |Re: sales organization and distribution channel;
to find the FM : CRM_BUPA_SALES_AREA_GET_ALL.
I do not have a CRM system to check what this FM does.
Is there any similar function module?
Regards,
RemiHi,
Based on what data you want to retrieve thsese fields?
Can you please give more details on your requirement?
I think from table KNVV you will get these info.
Best Regards,
Deepa Kulkarni -
Common distribution channel division
We are using common distribution channel and division on R3. On CRM the BP are setup against sales area - using sales org + common distribution channel of R3 + common division of R3.
But the requirement is, when an order is created in CRM it should go to R3 for the required sales area and not common distribution channel division. common distribution channel division are being used only to maintain customer master and material master to reduce master data.
I am using header division option on CRM, how do we set up common distirbution channel and division.
pl advise.Hi.
To transfer common distribution channel and divisions from R/3 to CRM, you need to start transaction CRMD_DOWNLOAD_OM and execute report with option sales area bundling.
With this report bundling sales area will be copied to table SMOTVKOS and SMOTVKOV and then you will be able to define your master data only in the referenced sales area.
Regards. -
Common division & distribution channel
Hello all,
Kindly provide a solution to my query . Incase of same division & sales organisation but different distribution channel we can maintain common distribution channel so that no separate customer master data needs to be maintained for different distribution channels if customer details are same.
But incase where either division or distribution channel & division is/are different we can maintain common distribution channel & division so as to use the same customer for different sales area. But here do we need to maintain separate material master record for each division along with customer -material info record as well as condition record (customer/material)...???
As in here although common division is maintained but the materials ( Pharma & Paint ) are different along with their industry sectors....so how can the same material master be maintained for both the divisions..?
Sales org : LSE
Dist chl : LR & LS
Div : PH & P1
Please provide any input . Thanks.Hi
As of my understanding,
Sales org : LSE
Dist chl : LR & LS - Choose either of LR / LS as a common distribution channel. SAY LR is a common division
Div : PH & P1 in this case SAY PH is a common division.
Now
1. Your commond distribution channel and Division will be used only in case of creating of Customer Master. So your Customer master will be created in the following sales area.
Sales org : LSE
Dist chl : LR
Div : PH
2. To create Material Master Data we need only Sales org and Distribution channel. Division is not Required.
Sales org : LSE
Dist chl : LR
For the reporting or LIS / SIS purpose you can keep seperate divisions for the Every Material.
Say Material A with Division PH
Material B with Division P1.
Try Maintaing the data like this it will work for you.
Now here make sure when you create sales order , before that go to VOV8 and remove the entry for CHECK DIVISION (keep it blank) other wise system will give the error, Header division and item division will mismatch.
Finally for Condition again you can keep the respectively seperate division for each kind of material
Thanks
Rishi
Maybe you are looking for
-
I am having real problems with wifi on my ipad it was fine but for the last week or so wont connect! my laptop and iphone are connecting fine, I have tried everything! back up and restore from back up and still no joy so I am thinking of restoring th
-
Enhancing Extract Structure (MC11VA0HDR)
Hi BI Experts, I have added user-defined fields (beginnig with Z) to extract structure (Sales Order Header - MC11VA0HDR) to be the same name as in the base table and communication structure. The Z fields were added in the sales document table (VBAK)
-
ISW and Directory Server 6.3. unable to sync passwords
I thought I try to move on to DS6.3 and Windows Sync. I have already have 5.3 running on another machine and all works fine. But, I am having problem with the new version. I am getting the following error in the log files when a password change happe
-
Help with LaCie eSata Thunderbolt Hub
I have a couple of Icy Dock 4-bay drive enclosures. At the moment one is set up with a JBOD configuration, and the other is set up as two mirrored RAID sets, each 3TB. The Icy Dock enclosures support both USB and eSATA. When LaCie came out with the
-
I would like to use this options in the .hotspotrc file in the Java directory. (Java 1.5) -verbose:gc -XX:+PrintGCTimeStamps -XX:+PrintGCDetails But I got this error message: Unrecognized VM option '-verbose:gc' Unrecognized VM option '-XX:+PrintGCTi