T code reqd for External No range which is reqd at the time of posting AFAB

Hi Gurus,
While i am running AFAB,the system shows that i have to give external no range for doc type.I have given no range in FBN1 but system denies.Can pl provide T code for external no range which is reqd for Depn run.
Pl advise.
Regards,
Samar

Hi Guru,
Thanks for your reply.
After running AFAB,follwing error comes:
"Create document number range 24 using external number assignment.
Message no. AA759
Diagnosis
Processing had to be terminated, since you set up the document number range 24 for the year 2008 with internal number assignment.
System response
You should create a document number range with external document numbers for periodic depreciation posting, since the document numbers are not assigned from Financial Accounting, but by the posting program of Asset Accounting. The external number assignment, therefore, should not be understood as manually entering the document number. It is only external from the point of view of the Financial Accounting application.
Procedure
Change the number range 24 from internal to external number assignment in Asset Accounting Customizing."
Now pl advise me how i can change no range from internal to external.
Regards,
Samar

Similar Messages

How to get the Next free Number for External Number Range

Hi ,
To get next free number for External Number Range, I have used NUMBER_GET_NEXT Function module.
It is throws the exception like NUMBER_RANGE_NOT_INTERN.
How can i get the next free number for external number range object. And How to update the Current Number for External Number Range Object
Scenario.
Call Function module              NUMBER_GET_NEXT
Import Parameter.
NR_RANGE_NR : 02
OBJECT            : RV_BELEG
QUANTITY         : 00000000000000000001
I am getting Exception : NUMBER_RANGE_NOT_INTERN
Thanks in advance.
Regards
Ram

Hi Anand,
The SAP system issues the numbers for internal number range intervals automatically. This number is between the from-number and the to-number. The last number issued is logged in the current number level.
You need to enter a number for external number issue. The number you enter needs to be between the from-number and the to-number. For external number ranges, the number number used is not logged. So the next available number is not possible in a straight forward way.
Only for Internal number ranges, the FM NUMBER_GET_NEXT can get the next available number.
Hope this helps.
Thanks,
Balaji

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Passing validation(ob28) for particular company code at the time of posting

Hi Gurus,
My business requirement is creation of new company code for recalculation of accrual amount. where in these recalculated amount will be posted to new company code, however we had defined some validation (ob28) for document posting. so my query related to is it possible to pass all the validations for this new company code at the time of posting?
your response will be highly appreciated
Thanks & Regards,
Jamuna

Hi,
My requirement is to create new company code, and whenever the document will be posted during the posting whatever validations has been defined with respective to document posting should be restrict for new company code.
so wheneever business will try to post the document for new company code all the existing validations will be by pass for document posting.
Thanks,
Jamuna

[svn] 1012: Merging change 1011 ( for newer concurrent libraries which must be passed the return from

Revision: 1012
Author: [email protected]
Date: 2008-03-28 17:08:06 -0700 (Fri, 28 Mar 2008)
Log Message:
Merging change 1011 (for newer concurrent libraries which must be passed the return from
schedule, not the arg we passed into schedule).
Modified Paths:
blazeds/trunk/modules/core/src/java/flex/messaging/util/TimeoutManager.java

Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

HT201250 Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Is there a possibility to recover erased files from an external hard drive that was reformatted by the Time Machine?

Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

I'm getting an error message "Untrusted Connection" on my on-line bankig site which I use all the time. Now I can't access the site.

This "Untrusted Connection" is coming up when I try to access my on-line banking site which I use all the time. I also get a OpenDNS message about Phishing and I'm not sure why or what that is. The same thing is happening on my laptop which has Windows 7.

Did this and it now works.........and I was blaming firefox!!!!!
ESET: setup -> advanced setup -> extend web and email tree -> SSL
• SSL protocol: Do not scan SSL protocol

How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

As long as you share that AppleID for iCloud, you cannot. You are sharing a a single iCloud account and sync services. The only thing you can do is get a second AppleID and use it with iCloud - you do not have to use that new AppleID for anything but iCloud (ie. you can still share an AppleID for iTunes and App store purchases).
P.S. I am assuming you both want to sync your contacts with iCloud?

Table and views which are afftected during the SAP license post processing

Hi,
can anyone tell me those table and views which are afftected during the SAP license post processing process in SAP 4.7 installation on oracle.
Regards,
Abhishek

hi
there is no table active with the name MLICHECK
the table is not active in the dictionary
what to do now?
i want to see the license data of the sap system now in the table view..............

Error found at the time of posting of t code : FAGL_FC_VAL

Hi guru,
At the time of posting through said T code,the following errors are coming:
Document no: ERROR 15
Doc Error 015 does not exist in co code 1000 or has been archived.
Due to that error i am unable to post it .
Pl advise.
Regards,
Samar

Hi Gurus,
Kindly advise.
Regards,
Samar

I want to set up the time capsule. I have a D-Link router for WiFi to laptops. Do I connect the time caps to the D-Link or in place of it? thanks

I want to set up the time capsule. I have a D-Link router for WiFi to laptops. Do I connect the time caps to the D-Link or in place of it? thanks

You've posted to the iPhone forum rather than the Time Capsule forum, but to save you some time, you can either replace your D-Link with it since it is a wireless N router, or you can set it up on your LAN as an additional wifi router with its own unique SSID. If you do the latter, be sure to connect your mac to the Time Capsule rather than your D-Link so it will support your Time Machine backups.

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will a

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.

I'm confused about sound on my iPad 2. I know it has speakers and it makes sounds for notifications, etc. But when I play the Time Warner TV app, there is no sound. Do I need to buy speakers or headphones?

I'm confused about sound on my iPad 2. I know it has speakers and it makes sounds for notifications, etc. But when I play the Time Warner TV app, there is no sound. Do I need to buy speakers or headphones?

Here is my situation, iPad 1 Time Warner app works fine with or without headphones, ipad2 I can unplug headphones and it works but when headphones are plugged in I can barely hear it even cranked up, my husbands ipad2 works fine with both so what that tells me is that there is something physically possibly programmed differently. It really makes no sense. I might just take my ipad2 back and swap it out. It is weird all the other sound through the iPad comes through on headphones and speakers fine. You are not alone with your time Warner app sound issues.

How to get NEXT free NUMBER for EXTERNALLY assigned RANGEs - SNUM, MD91 ?

Hi Experts,
I know that, with the FM - NUMBER_GET_NEXT_V1, I can get the next # for most document #s.
But, this FM is ONLY applicable to INTERNAL NUMBER RANGE.
1 - But., am working with EXTERNAL NUMBER RANGE, so looking forward for a FM/BAPI, which gives me next free # for use.
2 - If nothing is there, How to get it done? Is directly grabbing the latest # from the table/data base?
3 - Any other ideas?
thanq

For an example
Look at Attributes for SAP function ' L_TO_CONFIRM_SU' . Observe the radio button 'REmote-enabled function module - 2nd one.
Then you can see under source code it calls other SAP FMs. This is where you call the SAP FM you found.
A remote enabled fm requires a Logical destination when called from a program- you might already know that.

Code needed for "putting waveform graphs and 8bit images in the same window by Windraw"

Hi Micheal, please sent the code example for my question:"putting waveform graphs and 8bit images in the same window by Windraw" , thanks.

You can start from here ...
Hope that helps,
Michael
Attachments:
tester.vi ‏97 KB

T code reqd for External No range which is reqd at the time of posting AFAB

Similar Messages

Maybe you are looking for