T. Code to create the GR / GI Material Document No. Ranhe

Hi,
I want to know the T. code and step how to create new material document for GI and Gi accounting doc. i know with T. Code OMBA and OBF4 i want how to create goods movemen tdoc. no.
regards,
zafar

Hi,
OMBT....
there create a new grp as per OMBA but not movement specific but a grp of movements
u can create plant speific .....OMC1
Regards,
Pardeep Malik

Similar Messages

Want to reduce the number of material documents created during Confirmation

When confirming each phase on the process order, backflush of components happens and a material document is created .So if we have multiple phases, multiple material documents are created. This way we are having large number of material documents created for each process order .
We do not want a material document to created for each phase but rather create one document while confirming the last phase of the process order. How can we achieve this? Is there a configuration or a user exit that can be used?
Our goal is to reduce the number of material documents created.

IF you assigned all the component to final phase then You can get only one material document for all the component
or
Remove all the backflush setting and do the Picking in COIK, The system will Post all the 261 movement component in one document

Create transfer order for material document - 4.6C system

Hi Gurus
Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
Thank you in advance
Regards
Sarath

Sarath,
Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
Thanks again.

User-Exit - MIGO How to get the Number of Material Document

Hi everyone!!
I'm looking for an user-exit after saving in MIGO transaction. I need the Number of Material Document (MKPF-MBLNR) to generate an IDOC.
Does anybody knows an user-exit to get this number?
Regards,
Rubens Kumori
Edited by: Rubens Kumori on Oct 20, 2008 3:26 PM

In BADI definition [MB_DOCUMENT_BADI|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mb_document_badi&adv=false&sortby=cm_rnd_rankvalue], you may use interfaces [MB_DOCUMENT_BEFORE_UPDATE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mb_document_badiMB_DOCUMENT_BEFORE_UPDATE&adv=false&sortby=cm_rnd_rankvalue] (before update task) and [MB_DOCUMENT_UPDATE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=mb_document_badiMB_DOCUMENT_UPDATE&adv=false&sortby=cm_rnd_rankvalue] (in update task)
Regards

How to create excise invoice without material document

Hi,
I want to create excise invoice for a subsequent credit note. I am agreed to give additional amount to my supplier for which i have not paid to him, now when i issue a subsequent credit note, how to create a excise invoice and do the excise entries without a material document.
Please suggest a solution
Regards,
Ashish

Go to T Code J1IH.
Select Additional Excise. Replace the document number by the vendors excise invoice. Enter the excise duties in lower box and click on Determine GL accounts button to simulate and then post.

How to create Transfer order from material document uFF08Move type is 101uFF09

Hi all,
is there any function module, BAPI to create transfer order from a material document number？
I want to use FM L_TO_CREATE_SINGLE,but the result is "Movement type 101 for manual transfer orders does not exist".
Is the parameters error？
Thank you in advance
Regards

The error message you get is number 196 from message class L3, do a where-used on it from transaction SE91 and then put a break-point on each line result. Afterwards, re-execute your function call and see which break-point is hit and investigate from there.
With that said, you really should be using Bapi BAPI_GOODSMVT_CREATE for all goods movement operations. It shares code with MIGO and executes the same Badi's and user-exits, so data integrity is not broken. Don't forget Bapi BAPI_TRANSACTION_COMMIT to commit changes in the database after a successful call.
cheers

How to create Transfer order from material document

Hi gurus,
is there any function module, BAPI to create transfer order from a material document number.
waiting for positive reply.
thanks
vinod

Hi,
The FM L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE could solve your problem.
Hope it helps.
Chang

CIN - Link between Excise invoice No (created in MIRO) with Material Document (GR)

Dear Experts,
I have done Miro for excise duty (CIN) of Import Purchase order and then posted the material document in MIGO_GR referencing PO, i have entered the Excise invoice No (created in MIRO ) in the commercial excise invoice no tab,while processing MIGO. Need the link between the tables containing invoice and Goods receipt for report development.
Thanks & Regards
Thangavel ganesh

The commercial invoice number in MIGO just pulls the excise data from the MIRO. It does not get stored in any of the material document tables.
For reporting you will need to go through PO history tables: EKBZ

BAPI to create output messages in material document?

Our stores manager has a list of material documents which require a repeat output. There are far too many for someone to manually go into each document and create a new message in the output options.
Is there a BAPI or transaction which can be used to create output messages for multiple MIGO material documents?
The ones required in this case are WE03 output messages.
Many thanks
Karen

Sorry, I should have said that the original documents were printed as WE01 outputs when they should have been WE03. We need to create new messages with WE03 as the type not WE01. Therefore it is not just a repeat output.
Therefore I don't think we can use MB90. Also it doesn't appear to let you enter multiple material documents.
Does anyone else have any ideas.
Thank you
Karen

How to get the partner tab in the Goods Issue Material Document ?

Hello ALl,
We have a 3rd party sales order stock with acc assignment "M" with special stock "E". we wanted the customer number to be populated on the G/L account line. This is being possible if we have the partner tab in the GI material document.
currently we have other tabs like material, Qty, Where, & Acc ***., but not the partner tab in our GI material document in detail section.
Can some telll me how i can get the tab?
THanks in advance
Arpita Rani

Abaper help is needed over here.
Appreciate if resolved.
Regards,
Kishore

Link between the Invoice and material document

Hi,
Here I am having a requirement to get all the GR made against an Invoice.
Let me explain it.
I am having one Purchase order. Now I made the GR with a delivery note number. Now in MIRO I pass the bill or create the Invoice against the delivery note. Now I want to know the delivery note number against that invoice number.
I cant go by the Purchase order no and item number also. Because I have to show the delivery note number against that Invoice number only. Because so many Invoices and GR can be created for the same PO item.

No I checked it out no value is there.
I am having another doubt also. Whther it is any configuration issue? Because My RSEG-XBLNR, is also blank though I made the invoice against the delivery note. I was expecting XBLNR will get that deliv note no.
Regards
Shiba Prasad Dutta

GR slip for PO created in Material document but not printed or in spool

Hello Inventory Management Gurus,
I have a problem printing GR slip onto the printer.
I am able to create the output and can see in the material document but not in the spool or printer.
I configured GR slip printing in OMJ4, created condition record in MN21 configured in NACE etc., for the output type.
What is preventing from printing or appearing in the spool if it created the output in material document?
I have the setting "print immediately" enabled and "release after output" unchecked in OMJ4.
What is missing?
Please help.
George

Hi
Output for GR is Printed through T-code 'MB90".
Note - in GRN Individual /Collective Slip and Print indicator should be selected.
Enter the GRN No,Select the Output type and Execute.
Regards
Viru

Material Document creating at the time ofDelivery

Hi Experts,
I am a FICO consultant.I am not so much aware of these things.
when i am doing PGI in VL02N, there are 2 material documents generated. Is it a correct way or it is happening wrong?
My question is at the time of delivery (PGI) can system creates more than one material document?
Please suggest me.Points would be rewarded.
Thanks and regards
Nilesh Joshi.

Hi Nilesh,
As per my knowledge you can do PGI only once for a delivery document that's why it seems resonable to have only one material docment for it.
Please tell us what kind of documents you got as a consequence of PGI?
Thanks,
Csaba

The T-code of creating dunning procedure

Could anyone please tell me the T-code of creating the dunning procedure.Thanks in advance

CONFIGURATION PATH:
Financial Accounting -> Account Receivable and Accounts Payable -> Business Transactions -> Dunning -> Dunning Procedure -> Define Dunning Procedures OR Transaction Path:
Accounting/Financial Accounting/Accounts Payable/Periodic Processing/Dunning/Environment/Change
Configuration
TRANSACTION CODE: FBMP
Basically there are three steps in this transaction:
1) Maintain dunning procedure
2) Maintain dunning levels
3) Maintain dunning texts
transaction from SAP:
- Before defining several dunning procedures and forms, you should check whether you can fulfill
all your requirements using one dunning procedure and one form.
- You should select Always dunn. notice? for
the last dunning level so that items at this level are not skipped.
- You can store the header and footer texts separately
for your dunning notices. If your letter paper already contains these specifications, you can remove the windows for these
texts in the form you define using SAPscript.
Regards,
Satish Muvva.

Plz tell me about the asset/capital material type.

Hi,
Can you plesae tell me how can i handle the scenario of asset/capital item procurement starting from the material type.
If i will create seprate material type then from wchich material type i will copy it.
regards,
Dinesh

Hi,
You may create material type of Non-Stock / Non-Valuated. You can create asset code before creating the PO. Then you create PO for the material with account assignment A & the asset number as your account assignment.
Regards,
Prashant

T. Code to create the GR / GI Material Document No. Ranhe

Similar Messages

Maybe you are looking for