T-Code to Fill Set Up Table

Hi Experts,
Can I have list of T-codes which are used to Fill Setup table for Differnt Applications.
Thanks,
DV

OLI0 C Plant Maintenance Master Data
OLI1 INVCO Stat. Setup: Material Movemts
OLI1BW     INVCO Stat. Setup: Material Movemts
OLI2 INVCO Stat.Setup: Stor. Loc. Stocks
OLI2BW     INVCO Stat.Setup: Stor. Loc. Stocks
OLI3 PURCHIS Statistical Setup
OLI3BW     Reorg.PURCHIS extract structures BW
OLI4 SFIS Statistical Setup
OLI4BW     Reorganized PPIS Extract Structures
OLI5 PMIS Statistical Setup
OLI6 Periodic stock qty - Storage locatn
OLI7 SIS Statistical Setup: Orders
OLI7BW     Reorganized VIS Ext. Struct. Order
OLI8 Set Up SIS for Deliveries
OLI8BW     Reorganized VIS Ext. Struct. Del.
OLI9 SIS Statistical Setup: Billing Docs
OLI9BW Reorganized VIS Extr. Struct. Bill.
OLIA C Maintenance Processing
OLIB PURCHIS: StatUpdateHeader Doc Level
OLID SIS: Stat. Setup - Sales Activities
OLIE Statistical Setup - TIS: Shipments
OLIF PPIS: Setup-RepetitiveManufacturing
OLIFBW Reorganized Prod. Extract Structure
OLIIBW Reorg. of PM Info System for BW
OLIM Periodic stock qty - Plant
OLIP C Plant Maintenance Planning
OLIQ Reorganization of QM info system
OLIQBW Reconstruct QM Infosystem for BW
OLIS LIS in the IMG
OLISBW Reorg. of CS Info System for BW
OLIX Stat. Setup: Copy/Delete Versions
OLIZ INVCO Stat.Setup:Invoice Verificatn
OLIZBW     INVCO Stat.Setup:Invoice Verificatn

Similar Messages

Problem about fill set up table

Hi all,
I got a problem when I run the fill set up table for sales billing data source. what I did is:
first delete the setup table then oli9bw->type in a sales document no.(as I only want this order data), then give a run name, last execute, but I got the message as follow:
Data source 2LIS_13_VDITM contains data still to be transferred
Could you pls explain what this means, and what should I do to solve the problem
Thanks

Set up table definition
Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
So once historical data is loaded you can delete the contents of the set up table.
name is extract sturcture of your data source + setup
also data is taken from setup table when an init / full/ full repair load is done.
so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
You can find the contents SE16
Filling set up tables
transac LBWG
+ SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
set up tables
Set up tables
Set up tables
view of set up tables data in se11??????????
Set Up tables..
lo: delete set up tables: DOUBT
LBWQ is the extraction queue and RSA7 is delta queue. Data is sent to delta queue from extraction queue through collective job scheduled in transaction LBWE.
when we want to extract the data using LO Cockpit, the data will be come to the extraction queue first and from there it will processed to the delta queue. SO lbwq works as a outbound queue.
If the update mode is Unserialised V3 then as soon as the document is posted it comes update table which you can see in Tr. Code SM13. After the jonb is scheduled the records come to RSA7 i.e delta queue from which BW pulls the data
If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
So in If you are going to do Setup table filling, delete the data from LBWQ.
The usage of Extraction queue(LBWQ) comes in to picture in delta loading. But actually system starts collecting the data (whenever there is document creation in R/3) after activating the EXtraction structure.
Steps to Be Performed
We know that there are 4 types of delta extraction that are available in LO. If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
Here is Roberto's weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
check this out...
LBWQ - T code is for what?
Ttransaction LBWQ
What is LBWQ?
Assign points if it helps
Hope it helps
regards
Bala

Error while filling set up table SD-Billing Documents - Perform Setup

Hello friends,
while filling set up table of SD-Billing Documents - Perform Setup
i am getting error 'TSV_TNEW_PAGE_ALLOC_FAILED' . i am executing this job in background process . Please suggest me a solution .
Regards
Nilesh Vakil

Hi,
Try some other LO extractor in RSA3 to check if you get the same error.
If you dont then it may not be system memory issue, check if thr is some user exit written for the extractor.The problem could be in the user exit whr the internal table may get overflown and lead to the page overfloen dump.
If this is also not the case try reducing the packet size.
Let me know if the issue is resolved.
Regards,
Ashwin

How to fill set up tables with out missing the delta records

Hi,
I would like fill set up tables in the productioon system of apllication of logistics.
Can you please guide me how do we perform.?
What are points to be considered?
Because,when i start the filling set up table by 10.AM if there are any posting at 10:05,10:06....like that
how can collect them i.e will i miss any records in second delta run?What setps to be taken care?
Thanks in advance
Naresh.

Hi.
You can fill the set-up tables during normal operation hours ,if you load the data into ODS and the update queue is 'Queued delta' .Downtime is needed to avoid the duplicates .But if you use 'Direct delta' you miss the delta documents. Hence it is better to go for downtime approach for this case.
Initially your delta records will be stored in the extraction queue and then when you run the collective job, records will be moved into delta queue. You can run the collective job (LBWE) anytime after the init run.If you need a daily delta ,then schedule this job before the delta loading. You can schedule this job either hrly or daily .This will move your records into delta queue. At the time of delta loading ,all your delta queue records will be moved into BW .
Thanks.

2LIS_11_VAHDR - Filling set up tables chanceled

Hello,
I set up a new cube. Here filling set-up tables of application 11 is necessary.
The job chanceled. Error message:
Error converting quantity: unit KG numerator 0 denominator 0 (doc. 75555833)
Is there a possibility to start from the point where it failed or is a complete new start
(delete of set-up tables of area 11) necessary?
In the corresponding set-up tables I don't see the doc.-numbers.
Than

Hello,
thanks for you input!!!! It was very helpful.
As I understand - ALL documents must be correct in order to fill the set-up table.
Over the weekend I scheduled the job again - chanceled after 24 hours.
I set the no. of records to be ignored = 999.999. Nevertheless the job failed.
Question: Is there a way to find out how many douments are wrong? I assumed in the job-log....but here was only a doc. number.
By the way - it's all in production system.
Any idea how I can proceed? ...time slot for weekend on the system is already reserved.

Multiple background jobs to fill set-up tables in LO

Hi,
Can we schedule multiple background jobs for filling the same set-up table concurrently - obviously with non-overlapping selections.
ex: one background job for filling order# 1000 to 100,000
one background job for filling order#100,001 to 200,000
Both jobs running at same time.
Thanks,
Anita S.

Hi Anitha,
Yes we can Schedule Multiple Setup Jobs for the same Application wiht the Diff Ranges of selections.
It is possible and i have tried in our project.
Egg:-
We did a Reload of some doc that were missing in BI.
Did selective deletion of those corrupted data in some Data targetsand filled the Setup tables wiht those selection conditions (in our case 10 diff selection).
We ran this jobs in Background simultaniously when all the jobes finished we have ran the Full Repair Requests of those 10 selections to those respective data targets.
Hope this gives you enough clarity.........!!!
Best Regards,
VNK.

Error while filling set up tables for 2LIS_11 data sources

hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

Hi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet

Restart init after filling set up tables

hi,
I already filled sd billing set up tables and completed a successfull init load. i guess i made a mistake and pulled all conditions data from r/3 at once. now i have the data successfully in psa but the problem is further updating psa data to ods is taking to much time. so i want to delete this init and split the loads. would this be a problem for set up tables? any suggestions to solve this problem is greatly appreciated..

i have like 20 millions of billing condition data and i have loaded only 2 million of it so far in a week.
i have only the start routinebelow, and two currency conversion routines in the update rules (conversion to group and local currency). but i have these same routines (even more) for the other ods's (invoices, orders, etc.) and i updated 2-3 millions records frpm psa to ods in few hours.
clear: i_comp_code[],
         i_comp_code[].
clear: i_material,
         i_material[].
select * from /bi0/pmaterial into table i_material
    for all entries in DATA_PACKAGE
    where material = DATA_PACKAGE-material
      and objvers = 'A'.
sort i_material.
select * from /bi0/pcomp_code into table i_comp_code
    for all entries in DATA_PACKAGE
    where comp_code = DATA_PACKAGE-comp_code
      and objvers    = 'A'.
sort i_comp_code.
delete DATA_PACKAGE where kstat eq 'X'.

Error while filling set up table for Inventory

Hi,
While filling up setup table for Inventory, 2lis_03_bf, i get an error, Plant F041 doesnot exist. I am trying to fillup the table without any selections. Can anyone please suggest me a solution.
Thanks,
Praveen

Please check the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Hope it helps you.

Issue in Filling set up table

Hi,
I am facing issue while filling the setup table for Quality management datasource.
Error message:
No summarization result is selected,
Message no. MCEX105
Thanks,
Ram

Hi Ram,
I hope you are using the same tcode - Go to Txn OLIQBW
give the Name of run and execute in Background.
I hope you done the same thing, if not please let me know
Regards,
Kiran

2LIS_11_V_ITM Set up table name

hi,
I would like to make INITIALIZATION of delta but I can't find the transaction code for it in SBIW.
Whats the transaction code.
thanks
Bhat

Hi Bhat
You can use below transaction code for filling set up tables for LO extractors, let me know if i can provide you more information
OLI1BW               INVCO Stat. Setup: Material Movemts
OLI2BW               INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW               Reorg.PURCHIS BW Extract Structures
OLI4BW               Reorg. PPIS Extract Structures
OLI4KBW              Initialize Kanban Data
OLI6BW               Recompilation Appl. 06 (Inv. Ver.)
OLI7BW               Reorg. of VIS Extr. Struct.: Order
OLI8BW               Reorg. VIS Extr. Str.: Delivery
OLI9BW               Reorg. VIS Extr. Str.: Invoices
OLIABW               Setup: BW agency business
OLIFBW               Reorg. Rep. Manuf. Extr. Structs
OLIGBW               Reconstruct GT: External TC
OLIIBW               Reorg. of PM Info System for BW
OLIKBW               Setup GTM: Position Management
OLILBW               Setup GTM: Position Mngmt w. Network
OLIQBW               QM Infosystem Reorganization for BW
OLISBW               Reorg. of CS Info System for BW
OLIZBW               INVCO Setup: Invoice Verification

Filling of set up tables for several company codes

hi
i am filling a set up table for the application specific inventory control statistical data. But while setting up data filling selection parameters contains selection parameters for the single Company code.
But in my scenarios there are several company codes whose data resides in the R/3 and i need to bring data for all company codes in the set up table.
so now filling up the data in set up table, shall i have to fill up data for individual company code, OR i have to fill data for one company only and on delta load data pertainig to other company codes will be populated to the set up tables.
kindly give ur expert advice in this situation.

Hello,
i dont understand why should it be mandatory to fill the company code on r/3 side while initialisation!!
But even if it is mandatory, u have to do one by one init runs on R/3 side for all company codes that you need.
Check in rsa3 for records after the init runs.
If it was not mandatory, u could have run the setup(init) run on r/3 side for all company codes at a time by keeping the field blank!!
Also again in the BW side you can have company code for selection in the infopakage!! there u can also have it as a range rather than running for one at a time.
Hope it is helpful now..
regards,

Filling of set up tables for Full and Delta updates

Dear Gurus,
How do I go about filling the set up tables if I want to load historical data to BW using LO **** pit when set up table is running on delta ?
I want to know how many set up tables will be there for each data source, Because if set up table is running on delta and using the same table I want to load historical data also then will I have to delete and fill set up tables or there will be a separate set up table for full upload and delta ?
If we have multiple set up tables for one data source then in the T-code OLI*Bw, where * -> App logistics num, so to fill I just say OLI6BW, then which set up table it is going to refer.
Clarify my doubt and get rewarded with plenty of points.
Regards
Mohan

Hi,
Filling up the set up tables depends on the datasource.
there are different T-codes for the respective extract structures
OLIIBW transaction PM data
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
OLI7BW is the tcode for Sales Order.
Hope this solves Ur issue....
Assign points if helpful..
Rgs,
I.R.K

Regarding set up table filling in R3 prod system

Hi Expert,
When I fill set-up table for Billing LIS data-source . It is taking lot of time, All though Data-volume is very less (Around 1 Lakh) .
It is taken almost 50000 sec and still running .
Please help.
Thanks
Devesh Varshney

Hi,
Prod system will be busy during your set up tables filling time.
Try to check ECC system load burden and fill set up tables data when system have required free application servers(SM50/51). Even try to fill set up tables in background.
if possible, use selections and fill set up tables.
Thanks.

Regarding SET UP table filling

Hi All
I have a small doubt,
Why do we need to fill the set up table when there is not user activity in the source system?
Is this going to lock the application tables like vbak, vbap, vbuk etc,.,?
what happends if i run the statistical run when the users are active in the system?
I want to do set up fill for orders starting from 2005 to July 2009.
When is the best time?
regards
Janardhan KUmar K

Hi,
Prod system will be busy during your set up tables filling time.
Try to check ECC system load burden and fill set up tables data when system have required free application servers(SM50/51). Even try to fill set up tables in background.
if possible, use selections and fill set up tables.
Thanks.

T-Code to Fill Set Up Table

Similar Messages

Maybe you are looking for