T-code to view the variant
Hello all,
We have created an variant for the warehouse activity monitor and would like tok know the t-code to view the variant that has been created. pl. advise.
Thanks,
Maxx
Hi,
You will see "Select Layout/Variant" icon in the application toolbar of the transaction screen if you have saved it for a particular transaction.
Refer following document:
http://www.olemiss.edu/projects/sap/Display_Variants_10_03.pdf
Regards,
Srilatha.
Similar Messages
-
What is the T-code for Viewing the Payment Advices....
Hi,
What is the T-code for Viewing the Payment Advices....
Regards
Sap GuruHi,
Payment advice creation - FBE1
Payment advice Change - FBE2
Payment advice Display - FBE3
Payment advice Delete - FBE6.
Assign points if helpful.
Thanks,
Vasu.. -
Path/T-code - to view the clearing document
What is the Path/ T-code to view the A/R customer account to view the clearing document (I have FI document number)
I just want to review the postings and understand the posting.
Thanks.Can be done in multiple ways.
As you have the FI doc. no., you can use FB03.
(ii) Execute FBL5N, enter customer number, company code, choose 'cleared items' checkbox, enter clearing date and execute. Then double-click on the clearing document number. -
T.codes to view the list of persons that are assigned to "activity"
Hi Guru's
Are there any transaction codes to view the list of persons that are assigned to u201Cactivity - personal assignment tabu201D in the project?
Regards,
Bhathe same you can view from CJ20n , by clicking perticular activity--> click on person assignment tab.
This can be true for all the netwrok maintenance txn.
Regards
Nitin -
SAP Trans.Code-To view the all expenses received from the company.
Is there any SAP transaction code,to view the all expenses received from the company?For an example,I have received conveyance,medical,LTA etc.on vouchers.Now,I want to see the received on which date I have taken.
RegardsI guess this information you will get in following reports ( put appropriate cost center )
Transaction Codes KSB1, KSB2, KSBP, KSB5
Also check Accounting-> controllong-> Cost center accounting-> Info system-> Reports for cost center accounting-> line items/more reports. -
SAP Trans.Code-To view the previous month's OSP Report
Pl.mention the SAP trans.code for view the OSP status as on previous month.For an example,I want to see the status of OSP stocks as on 30.11.2010.How can I see?From MBLB,we can see the current OSP stock status.Is there any trans.Code for view the previous month OSP stock status?
Regardshi,
there is no t code specific to your requirement, but you can get the details through MB51, by metioning repective date and movement types like 541,543 etc..
hope this will help..
Regards
Manohar -
T-Codes to view the consolidation balance sheet
Hi,
Can you give me the T-Codes to view the consolidation balance sheet & consolidated income statement.
Thanks
PrathimaDear Pratima,
you can use this T Code for Consolidation for B/S for more than one Co Code with diffirent Chart of Accounts F.54 - Account Balance Structure
Regards
radha -
Std report T.Code to view the Employees those are assigned to the Project
Dear Guru's,
We are assigning Employeeu2019s in u201CActivityu201D u201CPersonal assignment Tabu201D, for these employees we are booking the u201CTime sheetu201D against u201CNetwork activityu201D.
Are there is any standard report is available to view the Employees those are assigned to the Project. If it is available please provide the Transaction Code.
Regards,
Bhanu PrathapHi
Nitin is correct if there is no HR then it is difficult to set up resource planning based on workforce. Nitin is also correct in poinitng out that yu do not have to implement HR fully, just set up the personeel master data (HR Mini Master) with a basic set of data infotypes.
If however you do not plan to set up HR ot the personnel master then you need to do creative thinking - e.g. set up all your people as individual work centres and assign to activites - the work centre description can be the name of the person and the workcentre number can be the employee number - restrcitcions is the field length, etc - however the down side of all this is that standard reports with personnel number number will not suffice and you will have to do some work for your reporting - not major as the data is stored in SAP tables -
Transaction Code to VIEW the IDOC's in XI
Hi Guys,
I had configured the Partner Profile in R/3 and triggered the IDOC's to XI. I havent configured the scenario in IR or ID yet. Since i had triggered the IDOC's from R/3 and they show successful,which transaction should i use in XI to check whether the IDOC's had reached the XI system Succesfully or not.
Thanks,
KC.Hi Kittu
Have a look at this blog, it has all TCodes.
/people/morten.wittrock/blog/2006/03/23/getting-started-with-xi-part-1-xi-30-cheat-sheet
Here it goes~
SXMB_IFR-- launch integration builder/ Repository/configuration/SLD ( XI HomePage)
Proxy Generation
SPROXY--Proxy generation
Monitering features:
SXMB_MONI-- monitering of messages
SXI_MONITOR - monitoring Processed Messages
SXMB_MONI_BPE--Business process monitering
Alerts:
ALRTCATDEF- To configure Alert Category
Adminsitration of XI
sxmb_adm-- Administration
QUEUE MONITORING
SMQ1 Outbound queue
SMQ2 Inbound Queue
IDoc's& RFC's related
IDX1- Port Configuration
IDX2 - for IDoc meta data
SM58--RFC error Log
SM59 - RFC Destination
IDX5 - Idoc Monitor
Others
SWELS---Event trace switching on and off.
SXI_MAPPING_TEST To test mappings
SXI_CACHE To check directory cache
To get the cache information For Adapters- go to SXI_CACHE
Hope this helps
Thanks
Abhishek -
T.Code for Viewing the details of characteristic in Production order
Hi Gurus,
During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
What is table name where MIC values stores in the production order.
Thanks in Advance.
Srinivasan
Edited by: srinivasan Lakshmanana on Jan 12, 2008 3:07 PMHi Gurus,
During the production Order Stage , I want to see the MIC and value that I have mentioned for the operation in the routing . I don't want to see from the routing.
Is there any reports or option in the production order from where, I can see the details of MIC and Values that I have used in the routing.
What is table name where MIC values stores in the production order.
Thanks in Advance.
Srinivasan -
Transaction codes for viewing the registers
hi,
sap gurus,
We have done the utilization for the month of FEB-08.How we can confirm the the registers are updated or not.
Please give the inputs.Urgent
regards,
balaji.tPlease check the following registers-
J2I5 - To extract
J2I6 - To See or Print
for the tables
PART 2: J_1IPART2
for seeing the Utilization entries in Part 2 at the table as follows -
Excise Group : Your Excise Group
Transaction Type: Blank
Execute: system gives the utilized values. -
Transaction code to view process orders set for deletion
Hi PP Gurus
We are trying to search for transaction code to view the process orders which have status as DLFL i.e deletion flag set for the orders. In cooispi, the deleted orders are not shown in the report output.
I request you to let me know if there is any other code through which we can view deleted process orders.
Thanks & Regards
Harleen KaurDear,
In COOISPI put DLT in system status field and execute the report this will give you the list of all order with deletion flags
Also refer this thread,
COOIS Report for Production orders with status DLFL
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 6, 2009 11:16 AM -
Dear Frndz,
What is the T-code to view the system in-stock report.
Regards,
SriniHi,
In MMBE, enter material name, plant & storage location and click execute.
Double click on the storage location, you will get a complete list with the different categories in which the stock is available (unrestricted stock/ blocked stock/ sales order stock, etc...)
Regards,
Ashok -
Transaction code for checking the capacity of a job
Hi,
Can anybody tell me if there is a transaction code for viewing the capacity of Job.
Thanks and regards,
Avinash.SHi Avinash,
I am not geeting what you want normally CM01 for w/c vise Load you can use.
Pls elaborate yr problem a little bit.
Umesh -
How to view the delete entries in SAP
Hi Guru
The transaction code SO23 is used to view the distribution list, some of distribution group was deleted automatically.
We want to know who was deleted the entries in SO23? How to find out the deleted log details in sap?
Any other reason the distribution list was deleted automatically. Any idea
Please help us to provide the necessary transaction code to view the delete log details.
Regards
Edited by: Krishguna on Nov 24, 2009 4:09 PMHI Juan
Transaction code SM20,STAD and SM21 is used to view the log details less than 7days data only, but we want to view more than 7days data.
Please help us to provide other transaction code is used to view the more than 7days data.
Thanks
Maybe you are looking for
-
Aperture 3 and .log files?
Hey, I'm using Aperture 3 and i got my logger device. I was wondering that what File types Aperture 3 supports? My logger has ''.log'' files and when i try to put them to Aperture 3 it shows that it loads it and then crashes. Any idea whats happening
-
I went to restart my 3 week old iMac after and update, and the screen scrolled down in grey with hold the power button to turn off, then turn it back on again, in 5 languages. I did this and all you would get is the white screen, the chime and the Ap
-
Context mapping for Interactive ADOBE form
I could able to create the form context from the web dynpro context. I am stucked at mapping between the two contexts. When I insert the element Interactive form in the layout of Web Dynpro and specify the template source, We have the option of auto
-
Menu transaction disappeared after update on N78, ...
Hi guys, i just updated my N78 to version 12.046 and i can no longer see the menu transition!! what went wrong how can i get them back again??? PLZ HELP ME :'( Used a lot of S60 devices, now am with the King N82 Solved! Go to Solution.
-
Can't scroll down on PDF's or open in a reader
When I open a PDF on Safari (on iPad Air) it only ever shows the first page and there is no way of scrolling down. I have tried tapping on it etc to get the usual 'Open with' option but this never comes up. I have tried doing it directly from the lin