T.codes for MM User exit

Hi Alll,
Could any body tell me the transaction available to check the user exits for PR,PO and so on
thanks in advance
regards
sapmm

Sapmm,
I am not sure what you mean by check. I will assume you want to know which user exits are available. From here you can discover which ones, if any, are actually being used, and what they actually do, by reviewing the developed code using one of the ABAP editors.
You can use SMOD to review all enhancements, but I find it a little less confusing to use the following method. Try this:
SPRO > IMG > Search (binoculars) for "Enhancements". In the search results, they will be ordered by functional area (the right hand pane) Scroll down to the functional area of interest (You will get BADIs as well using this technique). Select the item of interest and go there.
You will be taken to the config section for that enhancement. Select the 'IMG actitivy documentation' icon (paper to the left). It will give a brief description of the standard enhancements. You can review these in detail using SMOD.
If any userexits have actually been implemented in your system, it will be via a project. You can review existing projects using CMOD. Select any active projects and review to see which enhancements have been assigned to the projects.
Normally, the above tasks are performed by an ABAPer. Most functional consultants don't get into the nasty details of Userexits.
Rgds,
DB49

Similar Messages

Problem in triggering the code for CO02 User Exit

Hi,
I am using the code for the Tcode CO02 (User Exit) and i am facing a problem that when i am using the code as a normal program it is executing fine and displaying the pop up window and showing the data in it.
But when i am using that code in the USER EXIT code it is not trigerring that pop up window.
I am using the enhancement:-
*PPCO0007 * - Exit when saving production order
And the include in which i am writing the code is :-
INCLUDE ZXCO1U06
plzz provide me guidelines for solving this problem.

hi ,
i am using the following: -
Enhancement No. -> PPCO0007 (Exit when saving production order)
When i click on the enhancement the following is displayed:-
Function exit -> *EXIT_SAPLCOZV_001 *
When i double click the function exit the code i had written in the following include:-
INCLUDE ZXCO1U06
plzz tell me whether i am doing it right or worng?

Checking code for SAP USER EXIT

we have enhanced SAP given data-source 2LIS_XX_XXXXX, there are hard coded user exits for this extractor. How to debug the code for enhancements?
I know we enhance data-source in CMOD....SAPLRSAP001 (transactional data)....SAPLRSAP002(attributes)

Hi Monica,
There are many ways to debug the code if you wish to enhance the DataSource. In RSA3 you can do that by clicking Debug mode option. This is already been suggested by Srini.
I would like to give you another way to do so.
If you want to enhance the Transcational data then you need to choose EXIT_SAPLRSAP_001 component of RSAP001 enhancement. It has 4 component for master data( Text, hierarchy...etc).
This is a function module enhancement. If you goto the source code of the function module, you will find an include program i.e. ZXRSAU01. double click on this program which will take you to the body of the program. This is the place where you need to write code.
here you need to write the code as follows.
case i_datasource.
when '2LIS_XX_XXXXX'.
Now here you can set a break point. This can be soft or hardcoded break point if you need to debug.
Better Hardcode it. Write
BREAK-POINT or BREAK username.
Now when you execute the DS through RSA3, The program will stop here. The data extracted from DS will be available in an internal table C_T_DATA. Now you can enhance this by writing code. Again you can debug by pressing F5 or F6. This is as usual the way you debug an ABAP program.
Hope this helps. If you need any further help contact at [email protected]
Give reward point if you're satisfied.
Happy debugging....
cheers,
Message was edited by: tapan tripathy

Required the transaction code for the user exit

Hi Abap Gurus,
        i want to find out the *sap transaction code for which the user exit belongs to from the below code i am getting the enhancement name and the type.
i want to know the transaction code for exit EXIT_SAPLMEKO_002 and EXIT_SAPLFYTX_USER_001
data: begin of it_modsap occurs 0,
        name   type modsap-name,
        typ    type modsap-typ,
        member type modsap-member,
      end of it_modsap.
type-pools:slis.
data:wa_layout type slis_layout_alv.
data:it_sort   type slis_t_sortinfo_alv.
data:wa_sort   like line of it_sort.
parameters:p_exit type modsap-member.
select * from modsap into table it_modsap where member = p_exit.
read table it_modsap index 1.
select * from modsap into table it_modsap where name = it_modsap-name.
wa_layout-colwidth_optimize = 'X'.
wa_sort-fieldname = 'NAME'.
wa_sort-tabname   = 'IT_MODSAP'.
wa_sort-up        = 'X'.
append wa_sort to it_sort.
clear wa_sort.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
    i_callback_program = sy-repid
    i_structure_name   = 'MODSAP'
    is_layout          = wa_layout
    it_sort            = it_sort
tables
    t_outtab           = it_modsap.

HI
The user exit EXIT_SAPLFYTX_USER_001 is trigered for the below transactions and also postings via IDOC.
'ME21' 'ME21N' 'ME22' 'ME22N' 'ME23' 'ME23N' 'ME31L' 'ME31'   'ME32L' 'ME32' 'ME33L' 'ME33' 'ME38'   'ME39' 'VL31N' 'VL32N' 'VL33N'.
This is basically used for tax calculation purposes.
The user exit EXIT_SAPLMEKO_002 is trigerred for multiple transactions of purchansing scenario.
Also use user exit for your business scenario.
Br
Vijay V

I want to add transaction code for one user.

Hi abapers,
My requirement is;
I want to add transaction code for one user.
EX: zsdf to kanne.
Can any body tell me the procedure step by step.
With regards,

If you want to give authorisation to an user for a particular tcode, you need to first include the transaction code in an authorisation Role and then assign the authorisation role to the user id in the transaction code SUIM.
A Basis guy will be able to help you to do this and anyway this is not the job of an ABAPer.
Hope this helps you.
Reward if this helps you

HOW TO FIND TRANSACTION CODE BASED ON uSER eXIT.

HI FRIENDS,
I WOULD LIKE TO KNOW HOW WE CAN FIND OUT A TRANSACTION CODE OF AN USER EXIT.
MY USER EXIT IS : EXIT_SAPLV60B_002 .
PLEASE LET ME KNOW .
THANS IN ADVANCE,
REGARDS,
ROBERTS.K

FUNCTION EXIT_SAPLV60B_002.
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(XACCIT) LIKE ACCIT STRUCTURE ACCIT
*"     VALUE(VBRK) LIKE VBRK STRUCTURE VBRK
*"     REFERENCE(DOC_NUMBER) LIKE VBRK-VBELN OPTIONAL
*" EXPORTING
*"     VALUE(XACCIT) LIKE ACCIT STRUCTURE ACCIT
*" TABLES
*"      CVBRP STRUCTURE VBRPVB OPTIONAL
*"      CKOMV STRUCTURE KOMV
INCLUDE ZXVVFU02.
ENDFUNCTION.
Above is the interface of the function module stated by you, create the include zxvvfu02 by double clicking on it,
put a break point in it and activate and in the debugging mode you can see that the structure XACCIT has EBELN i.e.
purchase order no. assign it to the reqd field.

What is the name of the table for finding user exit !

What is the table name to find the user exit !

Hi,
Goto to the table tstc and enter the transaction code for
which u want to find out the User-Exits. Check out the
program name from the result. Goto SE38 and dee that
program in display mode. Then search for the string Call
Cutomer-Funtion. All the result of search are the user
exits defined there for that transaction.
SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
cheers,
vasavi.
kindly reward if helpful.

ABAP program to search for FM/User-Exit lookups

Hi everyone,
I have a need to find any and all Function Modules and User Exits that may have been written in BW that are used to do a lookup of data from one InfoProvider to another.   I have found the following program from Lijo John which works for Update Rules and Transfer Rules but I need the same type program that digs into Function Modules, DTP's and any other User-Exit type code where a lookup could be performed.   These are noted as the limitations in the program Lijo John created and I was hoping maybe someone has a solution for these as well.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/abapprogramtofindBIlookupsandcodePatterns
If someone has a program that they could share that would do this it would be greatly appreciated.
Thank you,
Dave

Thank you Ashish. This was somewhat helpful.   I guess if there isn't an ABAP program available like I need then the next best thing would be for me to know the BW table names that holds the actual Function Module and DTP source code so that I can then create my own ABAP program that would query them for the existence of the InfoProvider name anywhere in the code.
The goal with all of this is to find ANY lookup from ANYWHERE in BW for a specific InfoProvider so that we will know what will have to be "disconnected" if we decide to get ride of that specific InfoProvider.
So, if anyone can tell me the tables that contain the BW Function Module and DTP ABAP source code I would appreciate it.
Thank you,
Dave

Populating cost center automatically by Ts code WVFB - Which user exit ?

Hi experts,
I want to populate cost center and to do 'k' assignment automatically using WVFB for Sotre Order creation.
Which user-exit should be activate? thanks a lot in advance.
( the purpose is when user create a store order by transaction code WVFB , the fields of 'k' assingment and cost center don't need to be filled out, an user exit should make 'k' assignment & fill out cost center KOSTL. I just need to know this user exit).
EXIT_SAPLWVFB_002 will be good for my problem? please advice. thanks.

Yes. I solved my problem.
EXIT_SAPLWVFB_002 was used to do it.

Why the code in a user exit is executed twice?

Hi all,
I've got a development in a user exit EXIT_SAPMP56T_001.
This user exit allows us to control the travel expenses.
When you go to the TX: PR05 you can see a list with travels to add expenses. Here you can select one item on the list and press the edit button to add new expenses.
We want to control this and we use this user exit for that purpose.
When the user selects a row and presses the edit button, the user exit is triggered. We can check the values of the table and see which row is selected. But this exit is executed twice. The first time the table doesn't have any changes on it, the second time it has marked the selected row.
Why is this happening? Why is this exit executed twice? And how can I control that the table is properlly updated?
Thank you.

Hi,
I think this user exist in getting triggered both in the PAI and PBO of that screen.
For avoiding this use the flag.
If flag is initial then only your code needs to trigger.
if flag is initial.
flag = 'X'.
then your code.
endif.
So when it again comes into the PBO it will check the flag and the same code will not be triggered for the second time.
With Regards,
Sumodh.P

Steps for Variable User Exit

Hi All,
I have to do some coding in my variable exit. I have followed the follwing steps to create a project a write the code. Anyone please confirm if my steps are correct or missing anything.
1. Go to CMOD, give project name and Click on create.
2. Enhancements -> give RSR00001. and click on Components.
3. Double click on 'EXIT_SAPLRRS0_001'. This will bring up the functionmodule in which we can find an include.
4. Double click on 'ZXRSRU01' Include.
5. Press Enter for the warning message.
6. It gave me a message saying that 'the Include doesnot exist, Do you want to create it'. Click Yes. This will bring up a blank ABAP editor.
7. Write the required code using CASE Statement.
Am I missing anything here?
I would be grateful if someone can send me any documents relating to the variable User Exits.
Best Rgds,
James.

Hi,
Directly go se38 and execute ZXRSRU01 program. Then write a case statement. below is the sample code to calculate default year month variable.
case v_name.
when 'ZYRMTH'.
    if i_step = 1.
      read table i_t_var_range
      with key vnam = 'ZYRMTH'
           into ld_s_var_range.
      if sy-subrc ne 0.   " no value exists, assigns default
        c_year = sy-datum(4).
        c_month = sy-datum+4(2).
        if c_month = 1.
          c_year = c_year - 1.
          c_month = 12.
        else.
          c_month = c_month - 1.
        endif.
        concatenate c_year c_month into c_monyr.
        l_s_range-low = c_monyr.
        clear e_t_range.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        append l_s_range to e_t_range.
      endif.
    endif.
endcase.
Regards,
Malli

Code Review of User Exits with Code Inspector

Hi,
We are using Code Inspector(Tcode - SCI) for checking the quality of ABAP Codes. It is working fine for all custom programs. But when we are checking the code of User Exits i: e MV50AFZ1 or ZXM06U22 then it checks the std SAP program (SAPMV50A) or (SAPLXM06) for these exits in place of checking that particular Exit only . How the customer/User Exits can be checked using Code Inspector. Pls advice.

Hi there!
Today, I stumbled over the same problem: Defining an Include for user exits leads to a check of the surrounding function group from SAP which I don't want to correct at all.
Is there a nice an elegant way of filtering out the SAP modules from checking? If not, the only way to get around this seems to be building an own implementation of the Code Inspector integration into CTS.
Thanks, Markus

Configuration for writing user exits

sir provide me the configuration of user exits,purpose how to write it
thank u

Hi Supraja,
User exits are the enhancements provided by SAP
you can use them in transactions. Each transaction will have user exits.
If you want to use your own requirements by making your coding while the transaction is run you can use user exits.
For example if you want to run the MRP in MD02 specific to MRP controller you can user exit.
Please also refer the document below.
USEREXIT
Userxits allow us to add our own functionality to SAP standard program
without modifying it. These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
All Userexits start with the word USEREXIT_...
FORM USEREXIT_..
z..
ENDFORM.
The problem lies in finding the correct userexit and how to find it if one exists for the purpose. Once the correct userexit is found the necessary customer code is inserted in the customer include starting with the z. in the form routine.
e.g. USEREXIT_SAVE_DOCUMENT_PREPARE
Certain application like SD still provide this form of enhancement using userexit but this practice is no longer being followed for newer extensions instead they are using EXITs which come bundled in enhancement packages . Nevertheless existing USEREXITS will be supported by SAP an all the newer versions of SAP.
HOW TO FIND USEREXITS
Userexits can be found in number of ways:
1) To find userexits in SD module , goto object navigator(SE80) and select
development class from the list and enter VMOD in it. All of the userexits in SD are contained in the development class VMOD. Press enter and you will find all the includes which contain userexits in SD for different functions like PRICING, ORDER PROCESSING etc. Select the userexit according to the requirement and read the comment inserted in it and start coding.
Some examples of userexits in SD (SALES & DISTRIBUTION) are:
1)ADDING OF NEW FIELDS IN PRICING
In Pricing in SD the fields on the basis of which pricing is done are derived from the FIELD CATALOG which is a structure KOMG .This structure is used to transfer transaction data to the pricing procedure in SD and is also known as communication structure. This structure KOMG consists of two tables KOMK for Header related fields and KOMP for item related fields. The fields which are not in either of the two tables KOMK and KOMP cannot be used in pricing .Sometimes a need arises when the pricing is to be based on some other criteria which is not present in the form of fields in either of the two tables. This problem can be solved by using USEREXITS which are provided for pricing in SD. Pricing takes place both when the SALES ORDER ( Transaction VA01) is created as well as when INVOICING ( Transaction VF01) is done. Hence SAP provides 2 userexits ,one for sales order processing which is
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
Depending upon which table (KOMK or KOMP) the new fields were inserted we use either of the above two userexits.These userexits are found in include MV45AFZZ of the standard SAP sales order creation program SAPMV45A.
In the case of userexit which will be called when invoicing is done ,these
are provided in the include RY60AFZZ which is in the standard SAP program SAPMV45A. The name of the userexits are same. i.e.
USEREXIT_PRICING_PREPARE_TKOMP or
USEREXIT_PRICING_PREPARE_TKOMK
These userexits are used for passing the data from the communication structure to the pricing procedure, for this we have to fill the newly created field in the communication structure KOMG for this we fill the code in the above userexit using the MOVE statement after the data that has to be passed is taken from the database table by using the SELECT statement. The actual structure which is visible in these userexits and which is to be filled for that particular field is TKOMP or TKOMK.
Before the coding for these userexits is done ,it is necessary to create a new field in either of the two tables KOMK or KOMP .For this purpose includes are provided in each of them .
To create the field in header data (KOMK) the include provided is KOMKAZ
and to create the field in item data (KOMP) the include provided is KOMPAZ.
One possible example for the need of creating new fields can be e.g. Freight to be based upon transportation zone, for this no field is available in field catalog and hence it can be created in KOMK and then above userexits can be used to fill the transportation data to it.
2) The other method of finding userexit is to find the word USEREXIT in the
associated program of the transaction for which we want to determine userexit using SE38.
3) The other method of finding userexits is to find the include in case of SD/MM applications where the userexits are located, this can be found in the SAP reference IMG generally in the subfolder under SYSTEM MODIFICATION.
Some other examples of userexits in SD are:
USEREXIT_NUMBER_RANGE
This userexit is used to assign a different internal document number to the
sales order(VA01) when it is created depending on some criteria like a different SALES ORGANIZAION(VKORG) .
USEREXIT_SAVE_DOCUMENT_PREPARE
This userexit is used to insert the ABAP code which will be called when
the document (sales order VA01) is just about to be saved. This userexit is used generally for custom checks on different fields , to display some information before the order will be saved or for making changes to certain fields before the sales order will be saved.
Exits & Enhancements
There are mainly six types of EXITs in sap which have been collected in the form of enhancement packages and attached to standard code in SAP.
These are different from USEREXIT in the way that they are implemented
in the form of FUNCTIONs while in USEREXITS we use form routines for their implementation. These are also sometimes known as function exits.
These start from the word EXIT_ followed by the program name and then followed by a three digit number.
e.g. EXIT_SAPMV45A_002
This exit is found in SD in enhancement V45A0002.
TYPES OF EXITS
1) MENU EXITS
2) FUNCTION EXITS
3) TABLE EXITS
4) SCREEN EXITS
5) KEYWORD EXITS
6) FIELD EXITS
We use SAP transactions CMOD and SMOD to manage exits. Before implementing an exit, it is required to create the project by using CMOD
selecting the enhancement e.g. V45A0002 and selecting the component
(one which fulfills our need) i.e. the exit which will be implemented in SMOD and after coding has been done the project has to be activated.
An exit can be coded only once.
FUNCTION EXITS
These are used to add functionality through ABAP code. These start from the word EXIT_programname_NNN ending in a 3 digit number. No access code is required to implement any type of exit including function exits.
The function exits are called from the standard SAP program in the form
of ABAP statement
CALL CUSTOMER-FUNCTION 'NNN'
This is in contrast to USEREXITs where PERFORM statement is used to call
the required userexit.
To implement the FUNCTION EXITs first of all the project is created and a suitable enhancement package is selected and from its components the function exit to be implemented is selected and on double clicking it the exit code will appear in ABAP EDITOR(se38) where a Z include will be found and the customer code should be entered in this include.
e.g.
ADDING A DEFAULT SOLD-TO-PARTY in Sales Order Creation
To show a default sold-to-party in this field when the user creates a sales order (VA01) we can use a function exit .This function exit is located in enhancement no V45A0002 . Before we can choose the exit we have to create a project in CMOD after that enter V45A0002 in the enhancement field and click on the components. In the components you will see the exit EXIT_SAPMV45A_002. This exit is used for our purpose.
Double clicking on this exit will takes us to function builder (SE37) . This
function exit has one exporting parameters and two importing parameters, we are interested in exporting parameter which is E_KUNNR of type KNA1-KUNNR i.e. if we move the desired customer name to this structure(E_KUNNR) it will be shown in the field as the default value when we create the sales order. This function also contains a customer include ZXVVA04. This include will be used to write our custom code.
Double clicking on this include and it will prompt us that this include does not exists do you want to create this object, select yes and the include will be created .In this include we can write our own code that will fill the field E_KUNNR.
e.g. E_KUNNR = 301.
Activate the include and Activate the project. Now when ever the SALES ORDER will be created, sold-to-party field will come up with a predefined customer.
FIELD EXITS
The field exits are managed, created, activated through program RSMODPRF. The field exit is associated with a data element existing in ABAP dictionary and hence to the screen field using that data element.
The format of field exit is:
FIELD_EXIT_dataelement_A-Z or 0-9
If a particular screen and program name is not specified than the field exit will effect all the screens containing that data element.
The function module associated with field exit shows two parameters
INPUT and OUTPUT. Input parameter contains the data passed to the field exit when the field exit was invoked by the R/3, we can write our own code to change the output parameter depending upon our requirements.
Before the field exit can have any effect the system profile parameter
ABAP/FIELDEXIT in all the application servers should be set to YES
ABAP/FIELDEXIT = YES.
TYPES OF USER EXITS
User exits are basically 4 types,
1. Field exit,
2. Menu Exit,
3. Function module and
4. Screen exit.
These exits we can use according to a situation...
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

How to authorize a transaction code for a user?

Hello,
How can I authorize the user for a specific transaction code and how can I block it?
I would appreciate if you can give some insight.
Thank you.
Hakan

Hi Hakan,
We can achieve this by using two T.Code SU01 and SUIM.
First check in SUIM,the T.Code that you want to block T.Code is belongs to which role.
For finding it Click on roles.Click on transaction assignment.Enter your T.code and execute.
After finding this goto SU01 and unassign that role for that user.
In this way we can block the user to use one particular T.Code.
For providing authorisation,add the role to the user id in SU01 T.Code.
Run SU53 T.Code after running the failure T.Code to know all the errors.
Please contact your BASIS person for all these.
Regards,
Krishna.

How to disable a custom designed Tx code for multiple user at a time

Hii ,
I have designed a screen in module pool for end user to make entries in the screen and when he saves the data is saving in standard table and ztable. the main field in the screen is Batch number..from that batch number bag number will be generated. and consumed quantity will be saved in that bag no.Bag number will be generated like first 5 digits of batch number and bag number series of that batch number. for example if batch number is 12345 and already 5 times packing is done for same batch..last bag number in the ztable will be 123450005.so next time when user tries to pack using same batch number the new bag number will be 123450006 for batch 12345.Problem here is when user tries to make enrties in that Tx code and at the same time if another user opens same Tx code to make packing for same batch both of them are getting same bag numbers before saving.
I have called Enqueue and Dequeue FM's but still at a time for same batch user is able to do the packing.now my issue is i want to restrict 2 user to use same batch while packing in that Tx code.
I have written following code for enqueue and dequeue technics
data: B_matnr type mara-matnr,
       B_charg type mchb-charg.
data : i_temp type TABLE OF zpackhdr WITH HEADER LINE,
       i_temp1 type TABLE OF zpackhdr WITH HEADER LINE.
move : 1110 to WA_BCH-werks,
       chk_matnr1 to WA_BCH-matnr,
       v_bcharg to WA_BCH-charg,
       vgrade to WA_BCH-grade,
       new_batch to WA_BCH-bagno,
       m_baleno to WA_BCH-baleno,
       b_date to WA_BCH-indat.
APPEND wa_bch to i_bch.
clear b_date.
READ TABLE i_bch INTO wa_bch INDEX 1.
    B_MATNR = WA_BCH-matnr.
    B_CHARG = WA_BCH-bagno.
concatenate B_matnr B_charg into
    WA_BCH-objek respecting blanks .
   modify I_BCH from WA_BCH index sy-tabix.
CLEAR: B_MATNR,
           B_CHARG.
call function 'ENQUEUE_EMMCH1E'
EXPORTING
   MODE_MCH1            = 'E'
   MANDT                = SY-MANDT
   MATNR                = WA_BCH-MATNR
   CHARG                = WA_BCH-BAGNO
if sy-subrc <> 0.
endif.
call function 'DEQUEUE_EMMCH1E'
EXPORTING
   MODE_MCH1       = 'E'
   MANDT           = SY-MANDT
   MATNR           = WA_BCH-MATNR
   CHARG           = WA_BCH-CHARG

I do understand what u say...mine is a custom designed screen...when i open that screen i have around 15 input fields in which batch is obligatroy...when i give batch and hit enter all the other fields will be filled automatically picking from the table which are relevant for that batch..for example..material,order etc are picked from table...and bag number field will be generated taking first 5 digits of batch and followed by 0001 if its afirst time entry for that batch....so when a user is opening that screen in 2 different windows and giving details without saving any of the screens...in both screens bag number is generating as 001...and when saving it ..its saving 2 entries with same bag number...so i have created a lock entry for afpo table taking order field...so when a user opens 2 screens with same batch...and giving entries in those 2 screens without saving..he is getting same bag numbers as 001.....now when user saving the first screen and coming to second screen to save...he is gettimg message 'ORDER CURRENTLY BEING PROCESSED'..but after the data gettng saved in first screen,then when he saves the second screen it is getting saved...with same bag numbers as 001.so my issue is here...when he saves first screen and comes to second screen to save it the user should get that error message and should come out of the screen....so that he can make a fresh entry for that batch and bag number will be generated as 002 for that batch...
Regards,
venkat.

T.codes for MM User exit

Similar Messages

Maybe you are looking for