T.Codes for Sending material outside..?

HI gurus
Can anybody explain me , what are all the T.codes available in STA SAP related to Sending materials to outside like Drillngm/c, grinding m/c,..etc
To do the some customer service work.. materials are not consumable, we wil use the material for some service work at customer place and get back to my company.
Pls explain me the abt the T.codes
Thanks
sap-mm

Hi,
There are two ways of handling your scenario. If the material which you are sending is a valuated material, then please create a "Z"movement type with the valuation option unchecked, so that you can issue against a cost center, by treating customer as a cost center. This causes a decrease in the stock of the material. Again when you want to bring the material back to the stock, you can verywell reverse the earlier transaction. Apart from it, you can have a development unlike the delivery challans (DC's) in the legacy in SAP and send the materials on the same.
IF the material is non-valuated, you can send them on "201" mvt type only, which does not affect the value of the stock at any stage.
Hope this answers your query.

Similar Messages

  • Sending material outside for repair

    All SAP Gurus,
    We want to send some material outside our company premises for maintenance work.
    For this I have made a service PO.
    Now, how to send this material out (which mvt. Type to be used)?
    And after wards how to take it back
    Regards,

    Hi Rajan,
    Please go thru the link Provided below:
    http://www.sap123.com/showthread.php?t=52
    I have gone thru the link but Fortunately i havenot found any information regarding sending material outside for services.
    If you want to use Service po then you have only two options:
    Either Send the material using MB1B 541 Movement type (If Negative Stock are allowed because for service items you may not found stock)
    Or Handle the Scenario out of SAP. That means Send Directly to the Service Provider without using SAP.
    Regards,
    Ashok

  • Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

    Hi Chhayank,
    the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
    Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
    ~Florian

  • T-codes for uploading material prices and domestic prices?

    t-codes for uploading material prices and domestic prices?
    regards

    Use Transaction VK11 and VK12 based on Condition type for price .
    Please reward if useful.

  • Sending material outside the plant to subcontractor for refurbishment

    Hello experts,
                         i have created a normal Miintenance order(PM01)and via that order i want to send my material outside for refurbishment to subcontractor,i have alread assigned the Control key as PM02for external services, now my problem is that when i go to components and put in my material with item category as "N"(NON-stock mtrl, though the mtrl is a stock mtrl). i m able to generat the PReq, but when i go to the PReq, i m getting the account assignment as "F", but item category is blank and in grey mode that i can not change.
    further when i go to making a PO for the PReq, i m still not able to change the item category.
    where r the settings that i m loosing.
    Please help
    Regards,
    yk

    yk,
      The subcontract indicator on the operation "External tab" is only available if you have DIMP (Discrete Industries and Mill Products solution active) in SAP.
    If this is active..this would be the process to follow..
    1) assign Control key with "external processing" to operation
    2) Select the "Subcontract" check box on the external tab of the operation
    3) Assign Components to the operation with item category "L" , when you are providing the materials to the vendor
    4) Assign Proper values to the Material provision indicator for the material
    5) When you save or release the order, the Subcontract PR is then created automatically.
    Regards
    Narasimhan

  • IDOC for sending material data including classification data?

    Hi everyone,
    I'm just looking for an IDOC to send to an external system all data of certain materials but including classification system data, variant configuration data...
    I have checked MATMAS0x but I am not sure if those IDOCs match with my requirement.
    I would be very grateful if someone could please help me.
    Thanks in advance and best regards,
    Ben

    Hi Ben
    Kindly follows the below steps and trasaction screens, I believe you will be able to send the mat data incl. classification data to other external system through IDOC.
    Steps:
    Create material master record in SAP
    Enter T.Code BD10 to  send material master data from SAP to 3rd Party Logistics Provider
    Enter Material,Logical System and click Execute(F8)
    Press ENTER to continue
    Press ENTER to continue
    Enter T.Code WE09 to check the status and content of the Idoc created
    Enter Idoc Segment name in Search in Segment, Field name in Search in Field, Material No in "for Value" and press F8 to execute
    Double click on the Idoc number to check the content and status of the Idoc
    Expand the Status records to check the STATUS of the Idoc
    To check the fields in the Idoc, expand Data records and check the Mandatory fields in each Segment
    Transaction Screens:
    Transaction / Screen
    MM01
    BD10
    BD10 Screen
    BD10 Screen
    BD10 Screen
    WE09
    WE09 Screen
    WE09 Screen
    WE09 Screen
    WE09 Screen
    Expected Result:
    Expected Result
    Material Master Record Created
    Send Material Screen appears
    A popup window appears with a message "1 master Idoc(s) set up for message type MATMAS"
    A popup window appears with a message "1 Communication Idoc(s) generated for message type MATMAS"
    Send Material Screen appears
    Idoc Search for Business Content screen appears
    Idoc corresponding to the material no is displayed
    Idoc along with the 3 records(Control Record,Data Record,Status Record) appers
    Final STATUS should be 03(Data passed to port OK)
    All Mandatory fields must be populated with correct data
    If it is useful reward points
    Thanks
    Saravana

  • T Code for Changing material price

    Hi friends,
    Can anybody tell me what is the T-Code for
    1. To change th material price
    2. Transfer posting from Un-restricted stock to block stock
    3. Transfer posting from Un-restricted stock to Quality stock

    Steve,
    I have a requirement
    Daily cycle counts are completed on inventory. SAP prints nightly a count cycle of 50 inventory items to count (Inventory Audit). This is done so our warehouse folks count items throughout the year rather than at the end of the year all at once. Every January 1 of each year the cycle count begins until we finish cycling through the inventory, which usually happens around October.
    When suspend the inventory counts it places the inventory cycle counts on hold for a period of time. The cycling that would usually happen in October of each year is extended out by the days the inventory counts were placed on hold. This is to allow for 100% inventory audit counts. As I understand SAP puts those inventory counts on hold and begins again when it is restarted.
    I will need the TCODE to stop and start the inventory cycle count…
    Can you please help me out

  • Configuration of Tax code for a material

    Hi ,
    Does anyone know how annd where is the tax code of a material configures ?
    To elaborate, I am stuck ata condition in which I have to know if that particular material has a tax code configured for it or not.
    Kindly let me know
    Regards
    nilesh

    Hi,
    You can Create Tax Code with T.Code : FTXP and assign country and  Tax Jurisdiction code to It.Assign country, tax procedure  also.
    But tax on material , you have to define in your Calculation Schema with a condition type..Further  more you can enter tax code on Purchase Order in  Item Details and save.
    If helpful then reward.If ur question is answered, pl close it.
    Regards,
    Biju K
    Message was edited by:
            Bijay Kumar Barik

  • Code for send button. I need your help, guys!

    I would appreciate a Java code for a "send" button or a "send page" link that would send a complete web page to my email address. I have some forms for my users to fill out online and send them to me, and so the problem I am having is that when I use FrontPage forms (text boxes, check boxes, radio buttons, etc.,)for them to use, I am getting the input from those form only. What I NEED to get is the complete page, exactly what the users see on the screen with all the text in the forms. The need for this is that these forms (reports) will later be printed out, so they MUST look exactly as on the screen.
    So I am thinking a bit of Java code could help me out. Would you give me a hand guys? Thanks!

    Do some JNI and take a snapshot of the screen, it is the ONLY way I know to ensure EXACTLY what you ask for: even the HTML from the page may look different than what the users sees when filling out the form when that HTML is displayed on a different machine and system.
    Otherwise your agument seems a little trivial and you could just replicate the form on your local machine and insert the data you captured with a normal post operation into the local copy of the HTML form.

  • Refurbishment order for sending material to external vendor

    Hello everyone
    We have the requirement like the material is partially refurbished internally with the available resources and then we will send the same material to the external vendor for further processing(subcontracting).
    The cost of the both (internal + external) should be settled to the material.
    Thank for your inputs.
    Regards
    Santosh

    Hi Santosh,
    Below steps may help you, Anyway please check with your MM consultant as well
    MIGO     Send material to stores , Good Issue , Movement Type 202
    ME54N     Release PR : Order which you have raised.
    ME21N     Create P O
    ME29N     Release P O
    MIGO     Transfer posting to vendor, Transfer Posting to Vendor,Movement Type 941.
    And After return Movement type 942 and 201.
    Hope this will help you.
    Riyaj

  • Does any one have a sample code for sending email using IMAP ?

    Hi
    thank you for reading my post
    I have tried to use SMTP and because of some problems i could not use it and i must use Imap (authentication required)
    here is my SMTP code , does any one know how i can tune it to use Imap , or has a code snippet to send email using Imap ?
    thanks
    private static void postMail(String[] recipients, String subject, String message,
                             String from) throws MessagingException {
            boolean debug = false;
            class SMTPAuthenticator extends javax.mail.Authenticator
                    public PasswordAuthentication getPasswordAuthentication()
                        return new PasswordAuthentication(mail_usrname,mail_password);
            //Set the host smtp address
            Properties props = new Properties();
            FileInputStream fis;
            try {
                System.out.println("Loading property file");
                fis = new FileInputStream(new File("c:/email.properties"));
                props.load(fis);
                System.out.println("property file done");
            } catch (FileNotFoundException e) {
                System.out.println("file not found");
                e.printStackTrace();
            } catch (IOException e) {
                System.out.println("can not read properties file");
                e.printStackTrace();
            /*props.put("mail.smtp.user", mail_usrname);
    props.put("mail.smtp.host", smtpHost);
    props.put("mail.smtp.port", smtpPort);
    props.put("mail.smtp.starttls.enable","true");
    props.put("mail.smtp.socketFactory.port", smtpPort);
            // create some properties and get the default Session
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getDefaultInstance(props, null);
            session.setDebug(debug);
            // create a message
            Message msg = new MimeMessage(session);
            // set the from and to address
            InternetAddress addressFrom = new InternetAddress(from);
            msg.setFrom(addressFrom);
            InternetAddress[] addressTo = new InternetAddress[recipients.length];
            for (int i = 0; i < recipients.length; i++) {
                addressTo[i] = new InternetAddress(recipients);
    msg.setRecipients(Message.RecipientType.TO, addressTo);
    // Setting the Subject and Content Type
    msg.setSubject(subject);
    msg.setContent(message, "text/HTML");
    System.out.println(msg.toString());
    Transport.send(msg);

    Please try this out!!!!!!!!!
    You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
    Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
    'Create an Outlook object
    Dim Outlook 'As New Outlook.Application
    Set Outlook = CreateObject("Outlook.Application")
    'Create e new message
    Dim Message 'As Outlook.MailItem
    Set Message = Outlook.CreateItem(olMailItem)
    With Message
    'You can display the message To debug And see state
    '.Display
    .Subject = Subject
    .Body = TextBody
    'Set destination email address
    .Recipients.Add (aTo)
    'Set sender address If specified.
    Const olOriginator = 0
    If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
    'Send the message
    .Send
    End With
    End Sub

  • IDOC for sending material including classification data?

    Hi everyone,
    I'm just looking for an IDOC to send to an external system all data of certain materials but including classification system data, variant configuration data...
    I have checked MATMAS0x but I am not sure if those IDOCs match with my requirement.
    I would be very grateful if someone could please help me.
    Thanks in advance and best regards,
    Ben

    Hi,
    CLFMAS01     Master object classification
    CLFMAS02     Master object classification
    STTMAT01     STTMAT: Material variants
    BOMMAT01     Master BOM - material
    BOMMAT02     Master BOM - material (2)
    BOMMAT03     Material BOM (from 4.6B)
    BOMMAT04     Material BOM with UPS Link
    MATMAS01     Material Master
    MATMAS02     Material Master
    MATMAS03     Material Master
    MATMAS04     Material Master
    MATMAS0x with CLFMAS0x should solve your problem.
    Regards,
    Srilatha.

  • MMBE-Sales order stock appearing under company code for the material

    Hi Frens,
    In MMBE, for a meterial, there is sales order stock lying in company code. Where to find the relevant documents for which the stock belongs to?
    Regards,
    CK

    Hi Jimmy/V Raj,
    V Raj, If I Right click on company code/Plant/storage location, I get Material Movement in inactive mode.
    Jimmy, Similarly if I click on Environment < Material Movements, I get a pop up message, List of material movements: stock lines can only be accessed from plant level downwards.
    This is because, in my case, stock is appearing only at Company code level.
    Hope I am clear in my requirement.
    Regards,
    CK

  • Error while writing a code for sending SMS in METHOD http_client_receive

    Hi friends,
                   I have a requirement, where i have to send a SMS from SAP system, i tried follwing codes but in both it is giving me same error. HTTP path mensioned below[ztest_02] is provided by service provider.
    I tried the same url in explorer and i received the SMS properly.
    REPORT ztest_02.
      CONCATENATE
      'http://hapi.smsapi.org/SendSMS.aspx?UserName=xyz&password=586998&MobileNo=919836789543'
      '&SenderID=serdc&CDMAHeader=919833678945&Message=Hirdffan'  INTO  wf_string .
      CALL METHOD cl_http_client=>create_by_url
        EXPORTING
          url                = wf_string
        IMPORTING
          client             = http_client
        EXCEPTIONS
          argument_not_found = 1
          plugin_not_active  = 2
          internal_error     = 3
          OTHERS             = 4.".......................THIS IS WORKING FINE .. RETURNS SY-SUBRC = 0
      CALL METHOD http_client->send
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.".......................THIS IS WORKING FINE .. RETURNS SY-SUBRC = 0
      CALL METHOD http_client->receive
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2
          http_processing_failed     = 3.".......................NOT WORKING FINE .. RETURNS SY-SUBRC = 1
    I COPIED ANOTHER CODE FROM NET WHICH IS AS FOLLOWS AS GIVES SAME SY-SUBRC IN SAME METHOD.
    CONCATENATE 'http://www.webservicex.net/globalweather.asmx/GetCitiesByCountry?CountryName='
                p_cnt              INTO http_url .
    CALL METHOD cl_http_client=>create_by_url
       EXPORTING
         url                = http_url
       IMPORTING
         client             = http_client
       EXCEPTIONS
         argument_not_found = 1
         plugin_not_active  = 2
         internal_error     = 3
         OTHERS             = 4. " ...RETURNS SY-SUBRC = 0
    http_client->request->set_header_field( name  = '~request_method'
                                            value = 'GET' ).
    http_client->send( ).
    CALL METHOD http_client->receive
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2
          http_processing_failed     = 3
          OTHERS                     = 4.  '".........THIS RETURNS SY-SUBRC = 0
    My question is why it is failing in same call...
    Is there any authorisation issues?
    Any call is missing in between?
    Is there any network issue?
    pls help........
    Edited by: kiran chorge on Mar 11, 2010 7:42 AM

    Hi Kiran,
    I just resolved this error in my system. If you are running on AIX, then your DNS server will most likely not be configured. To fix this you just have to make the HTTP call without the domain name.
    Just ping the HTTP and find out which IP it is going to, then rewrite your HTTP address as below :
    http://<IP ADDRESS>/SendSMS.aspx?UserName=xyz&password=586998&MobileNo=919836789543'
    '&SenderID=serdc&CDMAHeader=919833678945&Message=Hirdffan
    This should resolve your error. Also the HTTP message you are getting in the given method actually refers to the problem in conversion of a domain name to an IP address as the DNS server is not available. So everything is most likely working fine.
    Thanks & Regards,
    Aditya

  • T.code for extend material master to  plant

    Hi
    Is there any t.code  (other than mm01) to  extend the material master to plants?
    regards
    sesidhar

    Hi
    RAj
    THANK U so much fro ur information ,,and i want extend to storagelocation...i think it is not possible in MM50 T.code
    in mm50 stor.loc option is not there
    regards
    sesidhar

Maybe you are looking for