T-cube request id blank

Hello Friends,
Please could you share with me , under what circumstances can a plan cube request id be blank?
thanks!!
regards
YHogan

I recalled the answer.

Similar Messages

  • How to load data from a ODS to CUBE Request ID - by - Request ID?

    <i>How to load data from a ODS to CUBE Request ID - by - Request ID?</i>
    The problem is that... some requests had been eliminated of the cube and the delta control between the ODS and CUBE was lost. The flag "<b>data mart status of request</b>" of all the requests of the ODS had been blank.
    Now it is necessary to load some requests from the ODS for the cube.
    Notes:
    - it is not possible to make a complete load selecting the data to be loaded;
    - the PSA is not being used;
    - considering the data volume it is impracticable to reload the cube completely.
    Thanks in advance,
    Wesley.

    Dear R B,
    Considering the following:
    -> the delta control was lost;
    -> the data already are active in the ODS;
    -> part of the data of the ODS already is in the cube.
    The indicated procedure it only guarantees the load of the data that are in the ODS and that are not in the cube.
    Tks,
    Wesley.

  • R/3 table for the corresponding BW Cube Request details

    Hi BW Gurus,
         What is the R/3 table which staores all the details of the BW cubes request details like, Info package that is being loaded, what is the start time, date, no. records loaded, selection conditions, type of data update, Info source, data source, etc.. infomation.
    Thanks in advance,
    Dilse...
    Harish

    Hi Andreu,
    I have checked the tables we can get the information from all the tables not from  a single table. Thanks for the update.
    There is a table called RSREQDONE, which stores all the information like date, time, info packageid, no. of records updated, full load or delta etc....
    Once again thanks.
    Dilse...
    Harish

  • Deletion of Info cube request

    Hi Experts,
    Currently I am working on BI 7.0.
    Here is the scenario, Actually I want a such setting so I can delete the previous Info Cube request while scheduling info package for new request.
    Actually in 3.0 we had this functionality in Info package "Automatica loading of similar/ Identical request from the Info cube" where we can select the radio button to delete the previous request from Info Cube.
    Do we this type of functiobality in BI 7.0?
    Regards
    Sujay

    Hi Sujay,
    Netweaver 7.0 does not support the feature you are talking about, it is possible only in 3.x.
    You could however incorporate this step 'Delete Overlapping Request' using a process chain. Thats what I do, I too had an issue on this earlier.
    Regards,
    Manu

  • Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

    Hi
    a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
    b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
    c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
    d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
    e. Can You describe the material used to create Your DVD
    - Video Codec/s
    - Photo file formats
    - Audio file formats
    iDVD can not use all but only a few of them - still it tries and then often fails
    Just to start by.
    Yours Bengt W

  • Delete cube request - before or after index creation?

    Hi Folks,
    a quick question. I plan to delete for one cube requests that are older than 3 days (cube only hosts short term reporting). Now I wonder if this should be done aftter the new load but before the index is created or after the index is created.
    I guess it is after the index is created otherwise it would take longer to find the requests that should be deleted. The index will be slighly degenerated due to the deletion but should be only marginal.
    I am right or wrong?
    Thanks for all replies in advance,
    Axel

    hi,
    a quick question. I plan to delete for one cube requests that are older than 3 days (cube only hosts short term reporting). Now I wonder if this should be done aftter the new load but before the index is created or after the index is created.
    The delete should be done before index creation, as once the index are created then even though the data corresponding to those index is deleted the index still remains. This unnecessarily increases the index table size
    regards,
    Arvind.

  • Cube Request Deletion - Other loads possible or LOCK problems

    Hi Folks,
    can somebody tell me if there could be a lock situation if I have in one process chain the cube request deletion step running (cleaning out some request) and at the same time another load is running into the cube? We would not drop/re-create the index in load situation so no lock by the index operation.
    Any experience?
    From what I have seen there shouldn'T be a problem as the request deletion will be "scheduled" and simply execute if lock is release (if there is any) and the deletion it self places only a quick lock to determine the request ID but doesn't much impact other loads.
    Is this all correct? Or any other views?
    Thanks,
    Axel

    Hi,
    While Loading
    It is not possible to:
    ·        Delete data
    ·        Archive data
    ·        Delete indexes and reconstruct them
    ·        Reconstruct statistics
    For more information:
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/bb/bdd69f856a67418962d74bfd7bd8af/frameset.htm
    Regards,
    Anil Kumar Sharma .P

  • Planning cube request status yellow

    My transaction cube all the while has requests of reportable status. Now, new requests generated by planning processes are in yellow status (QM & technical).
    I would like to find out how to tell what is wrong with the yellow requests or is it that this is due to auto maintenance is switched off. How to tell?
    What is the impact if I switch it on as green?
    Pls advice. Full Points will be awarded to the first clear answer.
    Regards
    Pascal Gabin

    As mentioned - the yellow request is simply an open request, which means if users enter data it will go in that request.
    It is important to use the Most Recent Data variable on the Request to make sure the open request gets included in any queries.
    You can close the request, turning it green, and then a new open request will be created when the users enter more data.  The system automatically does this whenever the row count in the Request exceeds a certain threshold (sorry - drawing a blank at the moment as to what the threshold is)

  • Simultaneous data activation in cube - request for reporting available

    Hi,
    I'm on BW 3.5.
    I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
    I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
    When I load all the data in a single load, it takes 10 hours to load.  When I break it up into 4 loads it takes 3 hours.
    My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
    Is it possible to get all 4 requests to activate simultaneously?
    I have tried adding an aggregate to the cube, no good.
    I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
    Does anyone have a solution?
    Many thanks,
    Paul White

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • Error processing cube - requested operation cannot be performed on a file with a user-mapped section open

    Hi,
    We have recently moved our production servers and since the move have been experiencing an intermittent (but frequent) error when processing our OLAP cube.
    The error messages presented are:
    "Error: The following error occurred during a file operation: The requested operation cannot be performed on a file with a user-mapped section open"
    "Error: Errors in the OLAP storage engine: An error occurred while processing index for the <Partition Name> partition of the <Measure Group Name> measure group of the <Cube Name> cube from the <Database Name> database"
    I assume the second message is a consequence of the first error.  The partitions and measure groups seem to vary each time the process is run.
    It appears from similar threads that this is usually caused by backups or anti-virus applications locking the files that Analysis Services is using the process the cube.  I have ensured that there are no backups running at the time of processing and
    I have disabled anti-virus programs without success.
    I have also created a new version of the cube (using the deployment wizard) which deployed without error but then encountered the same error when processing for a second time.  There was nothing (client application wise) using this cube when it failed
    to process.
    As I mentioned earlier, this problem is intermittent.  Sometimes the cube will successfully process but usually it fails to process.
    We have not encountered this error in our previous production environment or in any of our development environments.
    Has anyone encountered this problem before? Any suggestions on possible solutions?
    Thanks
    Rich

    Hi jonesri,
    I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
    SELECT[SESSION_COMMAND_COUNT],
    [SESSION_CONNECTION_ID],
    [SESSION_CPU_TIME_MS],
    [SESSION_CURRENT_DATABASE],
    [SESSION_ELAPSED_TIME_MS],
    [SESSION_ID],
    [SESSION_IDLE_TIME_MS],
    [SESSION_LAST_COMMAND],
    [SESSION_LAST_COMMAND_CPU_TIME_MS],
    [SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
    [SESSION_LAST_COMMAND_END_TIME],
    [SESSION_LAST_COMMAND_START_TIME],
    [SESSION_PROPERTIES],[SESSION_READ_KB],
    [SESSION_READS],[SESSION_SPID],
    [SESSION_START_TIME],[SESSION_STATUS],
    [SESSION_USED_MEMORY],
    [SESSION_USER_NAME],
    [SESSION_WRITE_KB],
    [SESSION_WRITES]
    FROM $SYSTEM.DISCOVER_SESSIONS
    Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
    http://msdn.microsoft.com/en-us/library/hh230820.aspx
    In addition, you can aslo use SQL Profiler to capture some events for further investigation.
    Use SQL Server Profiler to Monitor Analysis Services:
    http://technet.microsoft.com/en-us/library/ms174946.aspx
    If you have any feedback on our support, please click
    here.
    Regards,
    Regards,
    Elvis Long
    TechNet Community Support

  • Target System in transport request is blank

    Hi
    I set the transport system in a scenario DEV, QAS and PRD.
    When I create an order request, the field target system is blank.
    Where should I set it for me automatically display the system QAS as a system target ?
    Thanks,
    Enrique

    Hi,
    just adding my solution for future references..
    I had similar problem but when I checked our transport package it was showing wrong transport layer..
    Make sure your present transport package transport layer attribute is correct or not by using se21 or se80.
    we have entered correct transport layer under our package and all working fine.

  • ABAP Program to close BPC CUBE Request

    Hi
    I urgnetly need abap program to close BPC Open request.
    I tried program RSAPO_SWITCH_TRANS_TO_BATCH
    and function module : RSAPO_CLOSE_TRANS_REQUEST
    It never worked on BPC infocube at all.
    Please help me close yellow request to green ON BPC CUBES.
    Regards

    I tried that doing that does not close the BPC request to green unfortunately.
    and the reason i want this is cuz i am using fm RSDRI_INFOPROV_READ_RFC to read the BPC Cube in program and yellow request provide 0 requests, so first i need to close the request and then read the bpc cube.

  • Which authorization object we have to use for direct cube request ?

    Hello,
    In Analyser,  when we would like to request directly to Cubes, whe have 'No authorisation' message.
    Do you know wich authorisation objet we have to use for that ?
    Thanks in advance for you help.
    Best regards
    Nicolas Trinquand

    Hi Nocolas,
    Authorizations are two levels one is object level means if you want to access cubes, infoareas etc.
    second is data level, for this you need to create datalevel auth objects at RSSM.
    If you want to give authorization to queries relating to cube
    Use S_RS_COMP and give which cube you want.
    If you want to give authorizations to cube use
    S_RS_ICUBE .
    IF you have anyauthorization object ( Customized) data level select the infoprovider on which you want to activate this object at RSSM.then give permissions in your role.
    Check link
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
    Hope it is clear now.
    Assign points if you felt it is useful.
    Regards,
    Vijay.
    Message was edited by:
            Vijay G

  • How to get Cube Request Reportability From Tables?

    Hello,
    What table contains the reportability status on a request in a cube?  I want to know this so I can programitically figure out what cubes are reportable and which are not, thanks!

    Hope RSODSACTREQ will give you the loaded request and reporting availability information.
    Thanks,
    Arun

  • Checking Info Cube request data

    Hi gurus,
    Let's say I have I needed to look what data the DTP request brought up to the Cube.
    How would/through what navigation steps I shoud see for analysis data in one particular request.
    Thanks for your comments.
    Eddy.

    Try this ....
    right click on your cube and select manage .....
    under request tab copy the required request number ...
    select display data from the context menu of the cube and enter the request number (under data package dimension) and execute .

Maybe you are looking for