T.jizdnirady.cz, this site does not recieve my position from GPS, in other browser yes. Fix it pls. it is very important for me, many THX.

The start position is blank.

Looks like the link you originally clicked was a scam to get you to submit your username and password. I reckon the email from Google was legit (because it did not ask you to enter your username and password, but advised you to change your password.) So it looks like they did actually block a sign-in attempt. Sometimes, scammers do send out emails like this, but they are the ones which ask you to sign in again (because it's those details they are after).
Given that you've changed your password three times you should be safe. The golden rule is never submit usernames and passwords when prompted from an email - it's almost certainly a phishing attempt designed to get hold of your details.

Similar Messages

The fisrt cell in my spreadsheet does not recieve any data from lookout, using the datatable objekt

Always when I am create a link between Lookout and Excel, there is a problem with the first cell in a range using Datatable and DDE.
How can I solve this problem?

What database version are you using?
Works ok for me:
As Schema1:
SQL> create table t1 as select rownum rn from dual connect by rownum <= 10;
Table created.
SQL> create table t2 as select * from t1 where 0=1;
Table created.
SQL> select * from t1;
 RN
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
10 rows selected.
SQL> select * from t2;
no rows selected
SQL> create view stvw as select * from t1 union select * from t2;
View created.
SQL> select * from stvw;
 RN
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
10 rows selected.
SQL> grant all on t1 to schema2;
Grant succeeded.
SQL> grant all on t2 to schema2;
Grant succeeded.
SQL> grant all on stvw to schema2;
Grant succeeded.
SQL>As SYS:
SQL> create synonym schema2.t1 for schema1.t1;
Synonym created.
SQL> create synonym schema2.t2 for schema1.t2;
Synonym created.
SQL> create synonym schema2.stvw for schema1.stvw;
Synonym created.
SQL>As Schema2:
SQL> select * from t1;
 RN
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
10 rows selected.
SQL> select * from t2;
no rows selected
SQL> select * from stvw;
 RN
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
10 rows selected.
SQL>

PSE does not open the editor from LR 4.4.......a big problem for a lot of people.

I have PSE 12 and LR 4.4 on iMac 10.9.5. My LR preference is set to PSE Editor and was done so by LR, I cannot change it. When I try to edit in PSE, an 8 bit Tiff is created then I get the error message that "there was a problem.......". In the details is this line:
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeLinguistic.framework/Versions/3/AdobeLinguistic
Referenced from: /Volumes/VOLUME/*/Adobe Photoshop Elements Editor.app/Contents/MacOS/Adobe Photoshop Elements Editor
Reason: image not found
I do not understand this, but the problems seems related to the Library, which, I don't know. I had PSE 12.1, so I uninstalled it and reinstalled PSE 12.0 (I can no longer update back to 12.1). It made no difference, same error message.

BTW, I tried moving the Editor app from the support file into the app folder per fixes on this issue in the past.

In the YouTube site does not show a word - Download.. - above the any video clip I chose!! Why? Is there a solution?

When I want to carry any video clip from youtube I can not because I do not find the word - Download - On top of that section, which usually I find when I use a browser other than Firefox.

I understand that much. On my MAC Mini, if you look above at original post, I CAN see both OS while in the Windows 7 partition or the MAC OS. This is NOT the case on my iMac. Again, when in the MAC OS I can see the windows partion and move information between the two that way. When in the WINDOWS partition, the only one that shows is the Windows OS from my computer or network. The only way you can tell its even a MAC is the bootcamp icon in the bottom right corner of toolbar. Both have same version of MAC OS so both should work same way.. When i double click on my computer, it should show both the Windows drive AND the MAC (as does my mini and another iMac 21.5 that i have). This iMac does not do that - only shows windows.

My adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

my adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

Activation no longer works. A replacement download and serial number are available Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Rcv'ng message: This web site does not supply ownership information. Connection not encypted. Q: What setting can I change in Firefox to allow access?

Website: g01cdwascl002.ahe.pok.ibm.com
Owner: This web site does not supply ownership information.
Verified by: Not specified
Technical Details:
Connection not encrypted

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

After starting my computer today and trying to visit and open bookmarked web sites, I cannot open them because I am getting this error message: This web site does not supply identity information. What happened? How do I fix it? Thanks

Today, when I tried to open web sites in Firefox from my Bookmarks, I could not. I continually received the following error message: This web site does not supply identity information.
I noticed that when I put the cursor on the box to the left of the address, that message appears. There is also '''no''' https:// before the address.
Can anyone help correct this problem? I believe sometime last week I may have fiddled with the Secutity settings in the Tools/Security option box and may have screwed up something trying not to have sites use cookies to track me?
Thanks,
Bob

You can set the pref browser.urlbar.trimURLs to false on the about:config page to see the http: protocol.
You can set the pref browser.urlbar.formatting.enabled to false on the about:config page to disable the highlighting of the domain and see the full URL more clearly.
*http://kb.mozillazine.org/about:config
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

I am not able to login to my facebook account and error message reads "This web site does not supply ownership information." Please help

I am not able to login to my facebook account and error message reads "This web site does not supply ownership information." Please help
only title bar opens and nothing else....please help

Normally, when you connect via http, the browser doesn't check for site identity, so I don't understand what's happening there.
Do you have any security-related add-ons that force popular sites to use a secure connection, or claim to provide anonymous browsing?
Were you making the connection on your own network or on a public network (e.g., school, coffee shop)? If it was a public network, maybe the error indicates that your traffic was being intercepted???
Without hands on, this is a tough one to diagnose.

Video will not play on BBC site error message this content does not appear to be working .Help

I have bbc news as home page after i updated to firefox 10 if i try to play embedded video i get the eror message [this content does not appear to be working] Help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

This file does not have a program associated with it...

Ok, I'm not awesome at technological troubleshooting, so if someone could help me, I would be grateful because I'm getting frustrated.
I'm trying to play a silly little game online and it's telling me I need Shockwave. I know I have it because I've played this game before (something time-wasting on addictinggames.com) and I found a file called Shockwave 11 in C:\\WINDOWS\system32\Adobe\Shockwave 11 with all sorts of things in it.
I checked my Add/Remove Programs list and it says I have Adobe Shockwave 11.5 and that it is used rarely.
Since there seems to be a glitch here that I don't understand, I went to the Download Shockwave page on this site and tried to download the latest version or whatever, if that would work. The gray progress bar moves across under the "Adobe Shockwave Player is now installing" line and then I get an error popup that says:
"This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel."
What am I supposed to do? What does this mean? What file? Huh??
I am running Internet Explorer 7 and have Windows XP.
I am a total noob and need to be spoken to like a child. Can anyone please help me?

I clicked on your link (thank you - where did you get that?) and installed the Full version, apparently successfully, though during the download there were a couple of components that were troublesome.
The error message I got during setup read: "Error opening file for writing: C:\WINDOWS\system32\Adobe\Director\SWDNLD.EXE Click Abort to stop the installation, Retry to try again, or Ignore the skip this file." Retry did not work, despite having clicked it 10s of times. I clicked Ignore, then got the same message again, but about a different file: C:\WINDOWS\system32\Adobe\Director\SwDir.dll Clicking Retry again did not help move things along, so I ignored this one too. What does this problem indicate? Do I need to do something here?
Those are the only errors encountered during setup. I declined the Google toolbar. The dialog box says Successfully Completed; I clicked Close.
So I go to try to play this game as a test and it says "Installing Shockwave Components" and then I get the same error popup telling me that this file does not have a program associated with it for performing this action and that I need to create an association in the Folder Options control panel!
What does this mean and how do I do it, since it appears to be critical to getting this thing to work...?

Error - The site does not contain a default keywords termstore

Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?

Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu

Mysite Error - The site does not contain a default keywords termstore

I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.

Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

T.jizdnirady.cz, this site does not recieve my position from GPS, in other browser yes. Fix it pls. it is very important for me, many THX.

Similar Messages

Maybe you are looking for