T key dodgy

Hi,
Has anyone else experienced intermittent problems with the t key on their macbook pro. When I type the t in the word "type", for example the t does not appear but then when I go back to correct it it works fine. It's like it doesn't detect the first click on the t key.
Anybody else having problems with key stroke detection?

Apologies to the forum admins - my question is already being addressed here:
http://discussions.apple.com/thread.jspa?threadID=1036890&tstart=0

Similar Messages

  • Foreign Key Relationships to external associations - Is it really this dodgy or is there a better way?

    Hi All,
    Let's picture that I have a GW service called Search Helps and within that service I have a PersonalAreas Entity Set which acts as a search help for drop down fields effectively that need to select a Personal Area.  I have 3 properties, with Personal Area Id and Company Code being the keys, and the text for Personal Area being the 3rd and last property. You really need to filter PersonalAreas by Company Code otherwise it's a fairly useless result set.
    Now within a different GW service, I have an entity called Position which has a single key of PositionId.  There is also a a property of company code on this Position.
    Now rather than asking the UI developer to get the Company code value and filter PersonalAreas with it directly, I thought it would be nicer for the UI developer just to use the navigation from a specific Position to PossiblePersonalAreas.  e.g. Positions('123')/PossiblePersonalAreas returns the entity set of PersonalAreas filtered by the Position's Company Code.
    So with that in mind, I add the external model reference pointing at the search helps service; then create an external association via the sneaky External Associations Editor button (that doesn't appear on the Wizard just to confuse you), and set up my Dependent entity to point at the Search Helps PersonalAreas entity.
    At this point I really want to tie the Position's Company Code to the PersonalAreas Company Code, but all I can do is set up a referential constraint of PositionId to CompanyCode or have no referential constraint at all (note - in my example I added the referential constraint as there is an issue with navigation keys being provided to external associations from what I can tell - more about this below).
    So, without any other option, I go into my GetEntitySet method of PersonalAreas and write something like the following:
      CASE iv_source_name.
        WHEN 'Position'.
          READ TABLE it_filter_select_options ASSIGNING <filter> INDEX 1.
          CHECK sy-subrc = 0.
          READ TABLE <filter>-select_options assigning <select_option> INDEX 1.
          CHECK sy-subrc = 0.
          position_id = <select_option>-low.
    *     Get company code for position
          TRY.
              CREATE OBJECT o_position
                EXPORTING
                  i_position_id = position_id.
              o_position->get_cost_centre_information(
                IMPORTING
                  e_company_code = company_code
            CATCH zcx_hr_object.
          ENDTRY.
      endcase.
    * Continue with retrieving PersonalAreas for given Company Code
    <Remaining code not shown>
    e.g. I have to assume CompanyCode is actually "Position Id" when the source of this call is from Position (I could also look at the navigation to find this has come from Position but if you're wondering, unfortunately for external associations, the key is not included in this for some reason but the same followup logic of reloading the object would be required).
    So the question I'm hoping the answer to is Yes is: Am I missing something in my understanding here?
    Thanks,
    Matt
    Edit since posting and playing around a bit more: Thinking about this further - it's unfortunate, but the navigation property in odata really implies the dependent entity has knowledge of the principal entity and realistically must know how to instantiate it if it needs to get data based on one of the properties. 
    Now while I'm fine with that (sort of) I think it's wrong that the dependent entity needs to have the required key properties to hold the principal entities as it makes something like a generic search help impossible to do with navigation - Maybe I just need to be done with that and expect filters to be used by UI programmers to find foreign key'ed entities....

    Hi Matt,
    I'm not surprised that you have an issue with this. One bugbear I have with Gateway is that for some reason the designers don't think any context beyond the immediate preceding navigation node is important. They don't support this within the same service,so it's hardly likley to work in a service reference.
    I may be wrong but I don't think GW is OData compliant in this respect. If I have the navigation path /blindservice/FromHereSet(1)/ToAPoints(22)/ToBPoints, it's rather restrictive to say I cannot see the initial key of '1' in the path when I am trying to resolve 'ToBPoints'. If that value - where I started - is key to the context, I have to know it.
    Currently the only way to access this context is to embed the 'key history' in the intermediate entities, i.e. /blindservice/FromHereSet(1)/ToAPoints(1,22)/ToBPoints. In my view that is corrupting the URl to suit the limitations of the SAP OData implementation. What's even more confusing/frustrating is that the technical request context appears to be able to store the stacked navigation keys but doesn't make use of this design. 
    I feel your pain
    Ron.

  • Dodgy caps lock key?

    Its not that bad, but sometimes it doesn't turn on/off when I press it. Back to the shop? I hope they don't want to take my macbook away for repair thus leaving me without a computer...

    I bought a new MacBook about 3 weeks ago. I had the same caps lock issue. I took it to the store, not really expecting to swap it for a new machine. But the people at the Genius Bar thought it should be replaced.
    But the new one had the same problem -- as well as some other issues (including the keyboard freeze issue under Leopard that is the subject of another thread). This time, the Genius Bar person told me that the caps lock key on the MacBook has been redesigned, to make it require a firmer press to avoid accidental contact -- rather like the "eject" key. In other words, what I was encountering was a "feature," not a "flaw."
    I'm not sure I totally accept that explanation -- the key does not seem totally consistent in how it responds to touch. But a check of other machines in the store did suggest that they all behaved, in varying degrees, in that way.
    Anyway, they replaced the machine again -- not so much because of the caps lock issue, but more because of the other problems. Same caps lock behavior on the third machine. So I'm inclined to think that, intentionally or not, this type of caps lock behavior is something that all new MacBook buyers are likely to have to live with -- at least for now.

  • Office 2013 Key Card - Worth keeping?

    AceOfSpades wrote:
    These are the proof of ownership, do not throw them out.  I keep a spreadsheet with a list of PCs and which key goes where.
    We do the same. You never know when you might need them.

    Hi guys,
    So when I joined this company, I noticed quite a number  of "dodgy" licences for Office. I instantly flagged this to management (who were completely unaware) and bought around 30 Office Home & Business licences for a very good price. Now, all these licences have been registered to a single account and as far as I am aware, once they have been registered they are useless. Do I need to keep the key cards for any reason? Are these still considered proof of entitlement?
    Thanks, Andy
    (Not so much a question as I'm going to keep hold of them anyway, but what's your take?)
    This topic first appeared in the Spiceworks Community

  • Color correction and "sudo-chroma keying"-can they be done?

    So I just wrapped my cousin's wedding, but the ceremony and reception were both held in a bar, which made for less than optimal conditions. Besides the prolific dim lighting, there were neon signs, specifically Miller and Bud Light. Those signs were both blue, so if I put on my outdoor color corrector, the video looked nice, but then if I panned, the regular ambient lighting looked off. If I applied my indoor color corrector for the ambient lighting, it looked good, but as I got close to the neons, it again looked bad. My question is, can I keyframe the 3-Way Color Corrector so that when I'm by the neons, it's as good or the same coloring as when I'm looking everywhere else?
    My second issue came during the vows. Being a bar, there was a Budweiser sign on the wall, and it was paper and had just gone up, so it couldn't come down. I knew I was gonna be framing that perfectly, and unfortunately I was. However, the sign has a nice white boarder to it, so my initial and current thought is to chroma key it out and replace it with something like "Congratulations." I wasn't using a tripod, so the image moves slightly and there's 2 people in front of it, the bride and the groom respectively. Would it be easy to chroma out the white boarder which then would give me some space to matte the rest out. But what about around the people? How good of a matte could I do there? I'm thinking of something like the Magic Wand tool from Photoshop, but FCP doesn't have that. The sequence is only ~5 minutes, so not that long, but what would make it easier on me?
    I don't have FCS2 yet, but if all goes according to plan, I'll be wiping my system on monday, installing Leopard, and going to FCS2 which means I could smoothecam that clip, so then my matting would be easier. In theory, I also will have Color at my disposal, but from the time I played with it at an Apple Store, it's too much for me, at least at this stage of the game. This wedding was done on the cheap, hence why I'm doing the video for them, so if I need to leave the color as-is, and the Budweiser sign in, so be it, but I'd really like to make this the best that I can, and neither of these experiments have I had much of any really experience with, so the more the merrier.
    As always, any thoughts or help is much appreciated,
    -Brian

    +>can I keyframe the 3-Way Color Corrector so that when I'm by the neons, it's as good or the same coloring as when I'm looking everywhere else?+
    good news, yes you can keyframe all the color corrector filters and it should work handily for your situation
    +>I'm thinking of something like the Magic Wand tool from Photoshop, but FCP doesn't have that.+
    try these, might be just what you need: http://www.lyric.com/fcp-plugins/lyric-effects/index.html
    +>The sequence is only ~5 minutes, so not that long, but what would make it easier on me?+
    your Brother got married in a bar under a Budweiser sign Brian, I'm guessing he won't mind having his wedding video reflect the reality of the surroundings, so why fake it? ... easiest on you would be to leave it as it is 'cos theres nothing worse than a dodgy effect.
    hope that helps
    Andy

  • Cannot Open 'Key'

    I've been trying to install iTunes to an external hard drive after my previous version got screwed up because the drive letter (i.e., C:\ or F:\) disappeared. But so far in my attempt to install iTunes, I've encountered a pretty weird problem; about 3/4 of the way through the installation, a window pops up saying that it can't open a key (which I'll post at the end since it's really long) and then asks for me to verify that I have access to it. When I press okay, the only option, it continues with the installation for several minutes before stopping and saying that iTunes encountered an error and that I should try again later.
    If anyone has any idea what's going on, or how to fix it, that would be great.
    The key is: UNKNOWN\Components\32A7D632D11CABB00087CCFBB43\D41C20F5036A17744890B08AFCC8A6D

    but it's not allowing me to set the permissions for the subkeys, which I think might be why it's not working.
    Hmmm. In that case there might be dodgy ACLs on the registry keys. Hollovoid's use of RegAssassin in this context might be of some help with that:
    http://discussions.apple.com/message.jspa?messageID=10166569#10166569

  • Purchased Student version from Amazon, key invalid.

    I wish I didn't buy it from amazon, but I wanted the extra money off as I am a student with barely any money. Anyway, the product key they provided me isn't working. What should I do? I'm about ready to tell amazon to give my money back for selling me a fake key.

    Dragon_sissiy wrote:
    I wish I didn't buy it from amazon, but I wanted the extra money off as I am a student with barely any money. Anyway, the product key they provided me isn't working. What should I do? I'm about ready to tell amazon to give my money back for selling me a fake key.
    I will be surprised if amazon sold you a dodgy product.  Either you can't read the serial number or that you are not pressing the correct keys on your keyboard.
    The best you could do is to write down the serial number in a plain text file in Notepad and get it double checked by somebody in your family or ask your friend to read it for you.  when you are satisfied it is correct, all you need to do is to copy that serial number and paste it in the boxes at the time of installation or after you have finished installing the product.  The product can be installed without the serial number and you can run it in trial mode for 30 days until you have sorted out the number issues.
    Good luck.

  • Remote System and Remote Key Mapping at a glance

    Hi,
    I want to discuss the concept of Remote System and Remote Key Mapping.
    Remote System is a logical system which is defined in MDM Console for a MDM Repository.
    We can define key mapping enabled at each table level.
    The key mapping is used to distinguish records at Data Manager after running the Data Import.
    Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
    Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
    Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
    If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
    Now, I have to look at Data Syndication and Remote key.
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    Regards
    Kaushik Banerjee

    You are right Kaushik,
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
    Yes, but if they are duplicate, they needs to be merged.
    But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
    Pls refer to these links for better understanding.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
    Hope this helps,
    + An

  • Sy-tabix when using secondary key

    Hi,
    I have an internal table with records that contain a field with the line index of another table entry that they depend on.
    I can process this table recursively, by passing the parent index inside and using a
    LOOP AT ... USING KEY secondary_key WHERE index = iv_index.
    Unfortunately the sy-tabix is afterwards not correct, it contains the position in the secondary key probably instead the position in the internal table.
    Is there a way how I could find out the current table index, when using a secondary key to read a record?
    Regards,
    Bruno

    I rewrote it to include the row index also, not only the dependency.. was thinking too generic

  • How do i use my own image with keying (or green screen)

    how do i use my own image witrh keying (or green screen)

    Put your sky clip on a layer below the clip you want to key. One or the other will be a connected clip. Apply  the Keying filter to foreground clip (the one with the green screen). The green will be seen as transparent and the sky will show through as the BG. Adjust as necessary in the Inspector.
    Good luck.
    Russ

  • Key fields in DSO

    HI experts,
    I have the requirement to create DSO with Material,Plant,Usage,BOM,Alternative,BOM category,Counter,Valid From,BOM status,Base unit,Base Quantity fields. I am not involved in the functional part. could you please tell me which fields can take in the key part???
    Regards,
    KP

    Hi Kundan,
    What is the data source that you are using to laod the data to DSO?
    You can fidn the key fileds with the help of data source. or from the source table if you are not having Data source.(there will be a screw symbol for the key fileds).
    you can use material, plant, BOM as key fileds.
    Regards
    KP

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • Key Fields & Data Fields in DSO.

    In Standard DSO, Maximum how many number of key fields and data fields we can enter in one DSO?
    For e.g : In Cube Char - 248      KF - 233
                  In DSO Key Fields - ?   Data Fields - ?
    Regrards,
    Nithi.

    Hi Nithi,
    Since Key fields are decide by us we can add according to our requirement.
    Key fields can only be 16 you cannot exceed this. but if you have more key fields, you can combine fields using a routine for a key field
    Max Data Fields - 749 data fields can be added in a DSO.
    Warm regards
    Gokul

  • Key Figure Summation in DSO

    Hi,
    I am loading data from Cube to DSO.
    In cube i have fields with 2 records below as example
    f1=1 f2=2 f3=3 f4=4 and key figure k1=1
    f1=1 f2=2 f3=3 f4=4 and key figure k1=1
    In DSO all these f1's fields are key fields as per requirement. And when i load now i get in DSO as
    f1=1 f2=2 f3=3 f4=4 and key figure k1=2
    I do not want k1=2 but i want k1=1 in DSO and not sure why this is getting summed up even though i have selected overwrite in Transfer rules.
    I have checked mapping and cube data. All are fine.
    I just want to avoid this and do not know what to do.
    A routine or formula or something else?
    Please help.

    Hi,
    Check your DSO Design
    Keep f1 ,f2, f3, f4, are in KeyFileds of DSO  and Keep key figure k1 in DataFields of DSO.
    Here I'm assuming that F1 to F4 are Charecteristics.And only K1 is Keyfigure. If this is the case then I hope it will work if you follw the above design.
    Thanks
    Reddy

  • Issue with Period Control 03 for Depri key MSTL with 6446

    Hi Gurus,
    We want to use mid-month calculation for Dep. key MSTL using period control 03 (i.e. 03/03/03/03). We are also using 6446 as year-depedent Fiscal year (i.e. Jan and Dec 6 weeks other rest 4 weeks).  period control 03 is pro rata at mid period
    period 12 for 2009 start 11/14/09 ends 12/25/09
    period 1 for 2010 start   12/26/09 ends 02/05/10
    as per period control 03 mid month is Dec-04-2009 (setup in OAVH)
    When i acquire an asset on Dec-04-09, the dep start date is Nov-14-09 which is correct and all calculation is correct
    however when i acquire an asset on Dec-06-09 the dep start date is still Nov-14-09 which is not correct infact it should start dep from next month which will be Dec-26-09 (This is 1st period of Fiscal year 2010)
    As mentioned above we are using 6-4-4-6 fiscal year
    When acquiring an asset with mid month concept at year end we are facing problem in depri start date and hence calculation.
    The setting in OAVH for period control 03 are as below
    FV   Period Control     Desc.                             Year   Month   Day    Period    MidMonth
    NL        03              Pro rata at mid period          2009    12        4         12           ticked
    NL        03              Pro rata at mid period          2009    12        25       12           ticked
    NL        03              Pro rata at mid period          2009    12        31        1            ticked
    NL        03              Pro rata at mid period          2010    1          15        1            ticked
    Thanks in advance

    Deepak,
    Your period 12/2009 starts and ends between 11/14/09 ends 12/25/09. Now you acquire an asset on 12/4/2009. As per OAVH, you want depreciation calculation start mid-period. Then how is depreciation start date of Nov 14, 2009 for this case?
    Then you acquire an asset on Dec6, 2009. This, as per OAVH, falls into period 12/2009. Then why should the calculation start from period 1/2010 for this case?
    Thanks,
    Asheesh

Maybe you are looking for