T-Mobile/Linksys WRTU54G router and Epson wireless NX515 Printer - cannot print

I have a WRTU54G router setup and working fine for wired and wireless internet connectvity; printing however only works from my wired PC. I am unable to print from from any of the wireless connected PCs to the wireless printer. The printer is setup for wireless printing only (no cable connected).
I had this setup working with no issues prior using an ATT router.
My guess is an issue with a security setting on the router itself. Any ideas? Thanks.

Are you able to go online wirelessly from the wireless computer...?
Go to the linksys GUI and check all the wireless settings on the router including the wireless security and try to connect the wireless printer again to the wireless network.

Similar Messages

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless.

I'm trying to connect my MacBook Pro running on OS 10.8.2 to a Linksys EA3500 router and when I go to click on the set up icon I get an "unsupported operating system". Any suggestions on what to do? The Linksys site is useless. Do I need some kind of upgrade?

Don't use the CD software its not necessary.
Infact put it in the trash.
Your router will have an IP address in the range 192.168.1.1
Connect your router to your Mac via Ethernet cable (They usually supply one with the router and don't worry which end goes where the Mac LAN socket is bi-directional)
Also connect your router to your telephone line.
Now open your Web browser Safari . Type in the IP address above and a Javascript control panel will launch
Enter the default password and username (They are on a label on the router )
Your now have the ability to set up your router.
Your will need the password and user name supplied to you by your ISP at a minimum.
Enter these and most modern routers automatically configure the basic networking setting.
You now need to go to the security setting and set this as WPA2 Personal (NOT Enterprise) or WPA2 with AES and TKIP which ever it refers to and create a pass-phase. WRITE it down
You should be online.
Now remove the cable and connect to the Wifi and enter that passphase.

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

I am a new Apple user and had a visitor, with an iPad, at my house. I noticed the response time slowed greatly. I have a Linksys N router and wondered is I need an Apple router to allow the speed to be consistent.

I am a new Apple user and had a visitor, with an iPad, at my house. I noticed the response time slowed greatly. I have a Linksys N router and wondered if I need an Apple router to allow the speed to be consistent.

I am a new Apple user and had a visitor, with an iPad, at my house. I noticed the response time slowed greatly. I have a Linksys N router and wondered if I need an Apple router to allow the speed to be consistent.

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Photoshop Elements 10 and Epson xp-810 Printer

I just purchased an Epson XP-810 printer. I can print from Photoshop Elements 10 just fime. I need to know how to set the printer up so I can import from its scanner.
Can anyone help me with this?

Thanks!
Date: Mon, 25 Nov 2013 20:14:45 -0800
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 10 and Epson xp-810 Printer
    Re: Photoshop Elements 10 and Epson xp-810 Printer
    created by Barbara B. in Photoshop Elements - View the full discussion
In PSE you need to install the TWAIN driver:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop -elements-11.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5874804#5874804
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5874804#5874804
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5874804#5874804. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Not sure how to use linksys wired router and using Airport Express as bridg

Hey, thanks for any help.
I now own a Linksys BEFSR41 Cable Router. I was told earlier that I could connect the modem to this router and then to the wireless AEBS. I was wondering if anyone knows how to do this bridge thing. Also if anyone has any experience with this linksys router with a mac.
Thanks a lot!

all good, thanks though!

Reset Linksys E2000 router and now my HP-6310 is Offline.

I recently reset my wireless Linksys E2000 router...changed network SSID name and WPA security key and now no one on my home network can print to the HP-6310. I am running Windows 7 and when I go to Devices and Printers, & double-click on HP Officejet 6300 Series, it shows the printer is "offline". My printer is configured as a network printer and is connected to my router via Ethernet cable. How do I get it back online and printing again?
Would really appreciate any help.
Thanks,
Gary

Delete all instances of the printer in Devices & Printers. Re-add it with this method:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

LInksys N route and Macbook Pro

I just recieved a Linksys WRT300N router. I have a Macbook Pro with Airport Dual core 2.0 Ghz, my question is can I use this router to take advanage of N range and speed. Can I enable the N features on my Mac without purchasing a Airport Etreme.

KTM74, Welcome to the discussion area!
Currently Apple has stated that the enabler is
shipping with the new square AirPort Extreme base
station (AEBS). They have not indicated that the
enabler will be available otherwise.
Actually, it seems there are stealth Macs already shipped with 805.11n hardware under the hood but crippled pending the Macworld announcement last week..
See http://www.apple.com/wireless/80211/
"These Mac computers support 802.11n in the new AirPort Extreme Base Station using the included enabler software:
iMac with Intel Core 2 Duo (except 17-inch, 1.83GHz iMac)
MacBook with Intel Core 2 Duo
MacBook Pro with Intel Core 2 Duo
Mac Pro with AirPort Extreme card option

Compare and Contrast :- Mobile Networks(GSM/CDMA) and CISCO Wireless-Mobility

Hi,
I am a CCNA certified Electronics and Communications Engineering Graduate from India.
Nowdays the market here is up in mobile networking driven by companies like Nokia-Siemens Networks, Ericsson, etc.
Wireless Mobile Networks are all geared up for 3G UMTS(Universal Mobile Telecommunications System) architecture.(in GSM).
* My question is how are the above mentioned networks different from the Cisco Wireless Mobility concepts?
* What is common in them?
I know that these mobile networks are converting to packet-switched systems from legacy circuit ones.
* Does cisco come in only as a backbone Routing and Switching hardware providerfor this area,
Or does it offer a complete Unified End-to-End Solution in this domain?
is the difference just size??

Neal,
I do not think that in a forum like this we will be able to provide you a full answer. I recommend that you contact your Cisco account team as they will be able to work through all of the details to your design and fill the requirements of your customer.
A few things for you to look into and ask your account team.
The CDMA2000 1x RTT gateway is the PDSN this gateway is very similar to the GPRS gateway
The MWR 1900 is designed for an IPRAN network design and may or may not fall into what you have describe but your account team can help you with that
The Cisco MAR3200 is a mobile router that is designed to route between various radio access methods such as CDMA or GSM or WLAN etc. It will also do mobile IP.
Cisco has an extensive solution range for both the access gateways and back end services such as service selection authentication accounting and billing.
What you are asking for can be done using Cisco products but, it is a complex network design so please contact your account team for full details.
I am sorry I could not answer your question 100% but hope I have given you enough leads to get the design sorted
David

WRT54GL Router and HP Wireless Notebook

I have a Linksys WRT54GL router with v4.30.5 firmware and a SpeedStream 5360 modem with SBC Yahoo! DSL. My desktop is connected directly to the router and the internet works fine. I can connect to my wireless network on my HP wireless notebook with an Intel PRO/Wireless 2200BG network adapter, but I can't connect to the internet. It sends packets, but hardly receives any (about 5 per minute). Windows Automatic Updates works fine, when I update the received packets increases, but I still cannot browse the internet. Even when I try a wired connection I get the same results, packets sent but few received. I've tried resetting the modem, and router, and repairing my adapter with no success. Thanks for any help.

Change the following settings
ssid-"yourname"
channel=11
beacon interval =50
RTS and Fragmentation threshold (default value) -40
the last 3 options are found under advanced wireless settings .
then restart ur wireless PC and re-connect to the wireless network.
if u have issues even after these settings....verify that u have the latest firmware
also u may need to change the power management option for your intel wireless pro NIC.
to do so....u need to go to the advanced properties of the Intel......under the "property" column...select "power management" and change the value to "highest"
in case u have any confusion....call tech support...n tell them what u wanna do....
my experience with linksys tech has been good so far

My Linksys WRT54GC router frequently stops wireless broadcasting

My Linksys WRT54GC (version2) model router frequently stops wireless broadcasting and I have to unplug and replug the power cable to connect again.
After some time, it again suddenly stops wireless broadcast until it's repowered.
I've been having this problem for over 2 weeks now and tried the latest firmware upgrade and resetted the router for countless times but couldn't solve the problem.
Anyone, has experience in this issue, has any reccomendation ?

Whats the Wireless Settings you have set on your Router (SSID, Channel, Security)?
Try different Wireless Channels on your Router from 1 or 11 and check if you are able to view your wireless network on your computer.

Linksys WRTU54G-TM and Trendnet tew-631brp not playing nice together, HELP

Ok so, since getting the tmobile@home service I have been having nothing but issues with my setup.
My current config setup includes the Comcast Cable modem <to WAN port of> Trendnet tew-631brp <LAN to WAN port of> Linkysy WRTU54G-TM and the WRT set to bridged mode. WRT firewall disabled, Wifi Disabled, Main router is the Trendnet with Wifi-N enabled. No machines are hard wired to my routers, I use only the Wifi-N from my trendnet.
Now the internet works as expected, except when you go to use the VOIP phone. When you pick it up, the net connection drops out and the Trendnet router reboots.
I have tried making the WRT the main router and having the Trendnet be the secondary, I've turned firewalls off, I've added them each router to the DMZ and nothing nothing nothing will fix this issue. Does anyone have any idea what I'm doing wrong?

I just tried adding the WRT as the main router and the 631 as the secondary router, and it still won't work. Would the NAT cause an issue when it's set-up this way as well? This is so confusing.

Wrt54GS router and Wrt54GS wireless adapter on Xbox 360

Totally new in the wireless router business, I bought the Wrt54GS router and the Wrt54GS adapter to connect my Xbox 360.
I installed the router with the cd and connected my pc on the router with a fixed ethernet cable.
So far everything working fine.
Then connected the wireless adapter on the Xbox 360, but it seems like the Xbox 360 doesn't recognise the Wrt54GS adapter.
What did i do wrong?
Sebastian

Do you have wireless PC's ? are they able to go online ?
enable network security and also change the beacon to 50 and the RTS and fragmentation threshold by 40 each under the advanced wireless settings.

T-Mobile/Linksys WRTU54G router and Epson wireless NX515 Printer - cannot print

Similar Messages

Maybe you are looking for