T series and P series CPUs, which one to go with.

Hi there.
I am just wondering what are benefits of P series CPUs over T series one, for example:
Intel® Core™ 2 Duo Processor P8600 (2.40GHz 1066MHz 3MBL2) 25W
Intel® Core™ 2 Duo processor T9400 (2.53GHz 1066MHz 6MBL2)
The above names are from T400 customization page, from my level of experience and knowledge, the second one should be far superior in term of performance, because it has 6 MB of cache and Also 9400 looks higher than 8600. The only benefits of the first item looks to be its level of energy usage.
Am I correct?
Thanks.

Tim,
Is JDeveloper Java EE 5/EJB 3.0 ready? EJB 3.0 seems ok, but I tried creating a JSF Page, and I could only create one in Java EE 1.4 (JDeveloper version 10.1.3.2.0)
JSF support works in Java EE 1.4 and Java EE 5. However, JDeveloper uses JSF 1.1, not JSF 1.2 - which is what we support in JDeveloper 11. In regards to your requirement to create charts, ADF Faces does provide data visualization components in JDeveloper 11 - which currently is in developer preview and freely available on OTN. In JDeveloper 10.1.3 there are no graph components in ADF Faces.
Since you want to use NetBeans and ADF doesn't work within this IDE I suggest you to have a look at Trinidad. Trinidad is an open source JSF component set originated from the ADF Faces code. Trinidad also has charting capabilities
http://myfaces.apache.org/trinidad/index.html
In JDeveloper 11, Trinidad is integrated within the JDeveloper IDE for declarative development with ADF. Not sure though if you find the same level of EJB /JPA support in Netbeans as you do in JDeveloper. However, you pick.
Frank

Similar Messages

Which type of ADC is used in M Series, S Series and C Series DAQ Cards?

Hi
I want to know which type of Analog to digital converters(ADC) are used in M Series and S Series DAQ Cards. I know that DSA Cards and some C series are using Delta Sigma ADC. What about the ADC used in non delta sigma C Series modules. Why Delta sigma ADC is not used in M series and S series DAQ cards.
Regards
Samuel J

Hi Samuel.
The ADC type used is Succesive Approximation ADC. You can refer to the following links for your reference.
http://digital.ni.com/public.nsf/websearch/32FD9AA817D0EBE68625708C005E1B26?OpenDocument
Hope this helps.
Thank You.

Time series and Order series questions

Hi Guys - Need some help in understanding/Visualizing some basic APO concepts. I do not want to move further without understanding these concepts completely. I did read sap help and couple of apo books but none gave me a complete understanding of this very basic concept.
1. Data is stored in livecache in 3 different ways. time series, order series and atp time series. for now I am concentrating on just time series and order series. Can some one help me understand with an example how data is stored in time series and how it is stored in order series? I read that data which is not order related is called time series data and which is order related is called order series data.
My query is even in DP time series data, data is stored with respect to product and location that is transferred to snp. In SNP too data is processed with respect to product and location. so what is the difference in time series data and order series data?
2. what are time series key figures and what are order series key figures? I read safety stock for example is a time series keyfigure. why is it not a order series key figure? what makes a keyfigure time series or order series? can some one xplain this in detail with an example or numbers?
3. there is a stock category group in snp tab of location master LOC3. Stock category should be product related right? how is this related to location and what does this field mean in location master
Thanks a lot for your help in advance. Please let me know if I am not clear in any of the questions.

Hi,
Time series: Data is stored in buckets with no reference to orders.( If you place the mouse on time series data and right click for
                     display details , you will not find any information.
                      Suitable for tactical planing and aggregated planning. Usually in demand planning.
Pre requisite: 1. You need to create time series objects for the planning area.
                       2. When creating planning area you should not make any entries for the Key figure in the field Info Cube, category
                           and category group.
                       3. When creating planning area any entry you made in the field Key figure semantics with prefixed with TS.
                           (Optional entry)
Order series: Data is stored in buckets with reference to orders.( If you place the cursor on the order series data and right click
                      the mouse for display details , you will find information of order details.)
                     Useful for operative planning.
                     *You will have real time integration with R3.
Pre requisite: 1. You need to create time series objects for the planning area.( though you are creating Order series)
                      2.When creating a planning area specify a category or category group or enter a key figure semantics with prefix
                        LC.
                     3. When creating planning area you should not make an entry for the key figure in the field Info cube.
Thanks,
nandha

I have few questions to ask about the Expert Series and Valet Series

Hello.
I have few questions to ask about the Expert Series and Valet Series.
1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
2. Do I "HAVE TO USE CONNECT SOFTWARE"? Can I just use web interface to do every setting that these routers features?
3. Does expert series routers support guest network and parental control?
4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
Ok, that's all for now.
If I need to ask more questions I will do that in this thread as reply

With the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
These both the routers are backward compatible and they can connect to your G Series Product.

Difference between L Series and M series T Codes-Warehouse management

Hi all,
Will some body tell me the difference between the T Codes related to stock verification starts with "M" series and "L" series in the warehouse management. Which series codes are better for making physical verification in warehouse management.
In our company we are having warehouse management system and we are following "L" series codes for physical verification.
Thanks & Regards
Prasun jain

If you want to perform physical inventory on a storage location that has a warehouse assigned to it, you will have to use LI* transactions. The system will not allow you to use MI* transactions on those storage locations.
Regards,
Aroop

Session method and call transaction methos which one is the sap recomonded

hi
PLease give me the answer to these questions.
session method and call transaction methos which one is the sap recomonded why .
2) if we want to maintain BDC program in all the systems.wt to d0

Hi Revethi,
Here is the difference between the Session and Call Transaction method.
Session
Session method supports both small amount of data aswell as large amount of data
2) data processing is asynchronus and data updation is synchronus.
3) it process multiple apllication while perfomaning validations.
4) in session method data will be updated in data base only after processing session only.
5) system provide by default logfile for handling error records.
6) it supports both foreground aswell as background process
in bdc we use FM ... bdc_open_group " for creating Session
bdc_insert " adding transaction and bdcdata table for updating database
bdc_close_group " for closing Session
Call Transaction
Call transaction exclusively for small amout of data
2) it supports only one apllication while perfoming validations
3) there is no default logfile, We can explicitly provide logic for creating logfile for handling error records.
we can create logfile by using structure....BDCMSGCOLL
4) it doesn't support background processing.
5) data processing is synchronous and Data updation is Synchronous( default), in
this method also supports daya updation in asynchronus process also.
Syntax:
Call transaction <transaction-name> using BDCDATA
mode <A/N/E> update <L/A/S>
messages into BDCMSGCOLL.

I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?

I am thinking of getting my first Macbook pro for uni and was just wondering which one would be the best? The macbook pro or macbook pro with retina display? or even wait for the new release in 2013 ?

If your budget is unlimited, look at both the retina and non-retina and make a decision based on your preferences. If funds are tight, explore the options in the refurbished section. Unless you are dealing with courses that demand specific performance parameters, any one of these options will suffice.
Ciao.

There are two CDC methods - Source based CDC and Target based CDC which one

There are two CDC methods - Source based CDC and Target based CDC, which one is better performancewise. in data services.
If there is any document available which compares both and provides any info on performance etc, will be helpful.
thank you for the helpful info.

LIke Suneer mentioned CDC is for better performance.
Following link would be helpful.
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Source-Based+CDC
http://wiki.sdn.sap.com/wiki/display/BOBJ/Extractors-Target-Based+CDC
Thanks,
Arun

Protocols for switches 300 series and 500 series

These protocols are supported by switches of the 300 series and 500 series?
TCP
UDP/Unicast
UDP/Multicast
UPnP
RTCP
RTSP
Thanks

Dear Alejandro,
If you mean weather the switch can pass through these protocols the answer is a definite yes. If you meant something else can you please describe what you meant?
For example TCP is supported in a manner that it can filter trafic based on TCP port (Layer 3+ functionality), so can it do for UDP. Multicast is also handled via IGMP support. Regarding RTCP and RTSP how / for what would you use it?
Thanks and regards,
Zsolt

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

To replace your phone's screen costs $109US and I don't see why having Apple replace the screen would void your warranty.
http://www.apple.com/support/iphone/repair/screen-damage/

I traded my iphone in and now have a new one (iPhone 5) with the same SIM. Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

I traded my iphone in and now have a new one (iPhone 5) with the same SIM. Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

Intel and Nvidia graphics - set which one support choosen game.

Hello,
On some game forum one guy tell me i can set which one - intel or nvidia graphics support my choosen game, cuz i have intel processor and intel motherboard but also i have nvidia geforce 550ti graphics card, and my question is: Can i choose what graphics intel or nvidia support my choosen game ?

x_user wrote:Yes i have xf86-video-nouveau and mesa-libgl but performance for game what require only GeForce FX series is really bad, but maybe that model of graphics card is not best for open drivers, maybe this is the point.
There's no reclocking for this card currently.
Nouveau runs it locked at 405 MHz GPU clock, 648 MHz memory clock, 810 MHz processor clock.
Nvidia can run it at 3 perf levels:
GPU Clock Memory Clock Processor Clock
0 50 MHz 270 MHz 101 MHz
1 405 MHz 648 MHz 810 MHz
2 900 MHz 4104 MHz 1800 MHz

InfiniBand Host Channel Adaptors on M-series and T-series on Solaris 10?

Hi,
I saw spec and implementation of Sun InfiniBand HCA's (PCIe) on Sun X-series servers running Solaris 10, but hasn't seen these InfiniBand HCA's on M-seris or T-series. Is it possible to use these InfiniBand HCA's on M- or T-series servers? Has any one used Sun or any other InfiniBand HCA's (PCIe) on Sun M-series or T-series running Solaris 10?
Thanks,
Ray

Hi,
The README for DAQmx 8.0 for Linux has some information on pthread:
Linking with the pthread Library
In C or C++, use care if your NI-DAQmx application links to the Linux pthread
library. It is recommended to link your application with the gcc -pthread flag
instead of linking directly with, for instance, -lpthread. Incorrect linking
can lead to segmentation faults when the NI-DAQmx libraries load. If, after
replacing -lpthread, you still get a segmentation fault when loading NI-DAQmx,
you must explicitly link the dl library (-ldl) as the first library in your
list.
Also, one of my colleagues suggested that you should be using fork as soon as possible before calling any NI API or
else the child process could potentially die/segfault.
Please let me know if this helps.
Thanks,
Salvador Santolucito

What is the difference between HP 500 series and 110 series?

I'm not Tech savvey so I'm confused about the differences between the HP 500 and 110 series. The thecnical specks look simmilar so which is better?

Allanti wrote:
I'm not Tech savvey so I'm confused about the differences between the HP 500 and 110 series. The thecnical specks look simmilar so which is better?
A true comparison would need the model numbers (not the series) to be specific. Overall, the 110 series is considered the entry-level or value line while the 500 series is the mid-range line.

Themes for E Series and N Series

Check www.macammacam.info for latest themes for Nokia E Series and Nokia N Series. New theme release weekly
www.MacaM MacaM.info

I didn't come to advertise here...I came just to share what I did, just like you, who just wrote comments even nothing on it. In my blog I don't sell the theme or the thing I know.
Theme is about displaying...display is one of the reasons why people like Nokia. Indirectly, I advertise Nokia in my blog for free. It's Ok for me to put here link to my blog. If the people don't like my blog so ignore it.
My suggestions for you...Why don't you setup your on blog and put the link here, it's more useful....Who's care about who don't care....
www.MacaM MacaM.info

T series and P series CPUs, which one to go with.

Similar Messages

Maybe you are looking for