T/X Email connection to Wi-fi

If you have followed some of my previous posts, I had a problem connecting to my TX to my wi/fi. This problem turned out to be related to incorrect security settings on the T/X. This has been resolved however I have a new problem.  I can connect to the Web with the T/X however when I try to connect to download my E-mail I get the following error: "A server name has not been entered. Please setup server preferences." Looking on the TX under server preferences only gives a option of keeping or deleting downloaded files  on the server.  Does any one have a suggestion on how to solve this issue? Thanks
Post relates to: Treo 650 (Sprint)

Chapter 16, page 312 of the TX User Manual explains how to set up an Email Account on your TX.  This manual is included with your installation disk, or can be found online here:
http://www.palm.com/us/support/userguides/tx/en/TO​C.html
Just to get you started, open Versamail, click the menu, choose Accounts/Accounts Setup.  Enter all the pertinent information (like Server names and settings).
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • How do You Test EMail Connectivity?

    How do You Test EMail Connectivity?
    Once you setup the mail gateway with an IP address, port, and domain name.  How can you test email connectivity?  How do you force the MARS Appliance to send an email?

    There is no "test e-mail connectivity" button/function. Essentially you need to configure inspection rules to notify you when they are fired by mars.
    You will need to setup a user (preferably a non-admin account for testing) under "Management"-"user management"(if you haven't already done so) make sure to supply e-mail address.
    http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/initial/configuration/setup.html#wp1030836
    Now you can "Configure a Rule to Send an Alert Action." the following link explains how to do this...An easy one would be the "System Rule: CS-MARS Login Failures - Non-Admin User" rule. Follow the instructions in the link below under the "Configure a Rule to Send an Alert Action" section to modify the rule mentioned above. Keep in mind that this rule only fires when there are login failures. Once you have modified this rule try logging into mars using the non-admin user with a bad password...you should get a e-mail from MARS.
    http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/alerts.html#wp1056101
    Hope this helps.
    Dustin Suko

  • How to setup calendar email connectivity

    How do i setup the email connectivity of a  collaboration room calendar without using a microsoft exchange server. Can i  just use java mail server?

    You can configurate the email connectivity under configuration -> collaboration ->
    transports -> mail transport. This mail transport uses the java mail library. You
    need to provide the host name of your mail server. But keep in mind that by doing it you won't have calendar connectivity. You will have only mail connectivity to send mails from KM folders and mails for collaboration tasks for example.
    Regards,
    Marc

  • N97 Email connection issue

    I have N97 with firmware version 11.0.021.209.04.
    I am basically pleased with the phone apart from the slide unlock not working maybe 1 in 30 times (just open the qwerty pad to unlock in this case) not a big issue to me but hope it resolved in the firmware release.
    However I have the following issue which is bugging me:-
    I have set up my network priority list with my WLAN as 1, and the vodafone connection as 2.
    I have my email connection setting set to default connection.
    When I'm at home I have no problem, I can access my email through my WLAN.
    However when I leave the house and try to to access my email I get a message saying WLAN is not available unable to access email. Obviously it is not available and I would expect the phone to automaticall switch to priority 2 but it doesn't.
    I have to manually go into email connection settings and select vodafone.
    My internet connection goes through the priority list no problem.
    Does anyone know if I've not set something up correctly or if it is a bug.
    Cheers

    i have read the posts in this thread. so far, settings will be one of the reasons why you can't access your network providers' packet data.
    >please understand that setting up email needs packet data/ GPRS to finish setting it up and then you can use WLAN to retrieve email whenever you want.
    try this setting:
    -->menu>messaging>options>settings>email>select mailbox (yahoo/hotmail,etc)
         >options>connection settings>access point in use> select network providers' packet data
    --> if  the same issue persist, try deleting your WLAN connection and add it again
    --> or, you can try to do a soft reset which will make your phone return it's factory settings only 
          not deleting file at all, just key-in *#7780#
    --> next, do a hard reset. this time your files will be deleted so it is very much advisable to back
         up your files in OVI suite first or in your memory card before hard reset, just key in *#7370#
    --> least likely, if your phone is a new one or you just bought it, it is unneccesary for you to do 
         software update unless it is indicated to your product key that you may do so and if there
         is a new software for your phone. (check in nokia.com if you may do software update by
         by entering your product key)
    --> if all else fails, bring your phone to Nokia Care Center/ Service Center accredited by Nokia
    Ncca10

  • Cannot get email-connection to the server failed

    Trying to reestablish email connection after the server was disconnected

    judyfromamherst,
    The article linked below details a number of troubleshooting steps that can help restore functionality to the affected email account on your iPad.
    Get help with Mail on iPhone, iPad, and iPod touch
    https://support.apple.com/en-us/TS3899
    Sincerely,
    Allen

  • Email Connectivity in Collaboration

    Hi all
    I've recently installed Collaboration in EP 6 SP 2...the email functionality that needs to be set up from the rooms is as follows:
    When a new user is added to the room or new documant/etc added to room, an automatic email with link to log on to the room should go out to the required user so that he can register himself/or do requisite actions. The client does not want to send out emails from the CLP.
    Could anyone please let me know what configuration needs to be done to achieve the above?
    Appreciate all help.
    Thanks
    Amit

    Hi Amit,
    to configure the email connectivity as required, you have to configure the EMAIL Communication Channel by navigating to (System Administration -> System Configuration -> Knowledge Management -> Configuration -> Content Management -> Utilities -> Channels -> E-Mail Channel).
    You should also configure EMail-Transport by clicking on (System Administration -> System Configuration -> Knowledge Management -> Configuration -> Collaboration -> Transports -> E-Mail Transport -> JAVAMailTransport)
    Email notification for document subscriptions and room creations should now work. If you do not want to let users send emails from the CLP, you can easily remove the command "send mail" from the UI Command Group.
    Hope this helps,
    Robert

  • How to Sever Email Connection?

    Hi. I would like to retire or give away this iMac. I have deleted all personal documents, but how do I safely sever email connection from this device? I also own iMac OSX Snow Leopard and iPod.

    Hi
    If you have the original disks, which you would pass onto the new owner, the best way to clear your stuff off the computer and set things up for the new owner is to put a new installation of the OS onto the Mac.
    Insert your Install disk 1 into the drive and then Restart, and hold down the C key to take you to the installation windows.
    Select your language, the start up Volume and choose Erase and Install.
    At the point your registration process starts, abandon the registration, quit and eject the disk and switch of the computer.
    This will allow the new user a freshly installed system, whereby they can complete the registration process themselves. Make sure you hand on the disks 'cause they'll need them.

  • Loose of email connection to company server

    I am periodically loosing email connection to company email server on both my iphone and ipad.  Happens randomly.  Reconnection occurs right after.  Have gone thru and deleted email account in settings and re-established to no avail. Any thoughts?

    You are allowing slack or losing tightness in your email connection?
    are you connected to the server by string?
    If you meant you are losing the connection, what troubleshooting have you done?
    have you checked with the IT department for outages or if it is a widespread issue?
    What kind of Internet connection do you have during these outages-wifi, cellular?

  • Cannot send emails - connection to SMTP server timeout

    I cannot send emails from my Thunderbird. Every time I try, an error message shows up saying that the connection to SMTP server has timed out:
    "Sending of message failed.
    The message could not be sent because the connection to SMTP server smtp.lineone.net timed out. Try again or contact your network administrator."
    I have looked at many different possible solutions and tried them, but nothing seems to be working. I have tried several different ports, failed to send in Safe Mode with Networking and Thunderbird safe mode without add-ons and tried many different settings. I have ensured that the my settings on Thunderbird match the settings that my ISP recommends. My anti-virus software is not affecting it either. Maybe there is something I am missing but I would really appreciate any suggestions!
    Here is some general info:
    Mail provider: lineone
    ISP: BT
    Anti-virus software: AVG
    OS: Windows Vista
    Thunderbird version: 31.5.0

    Hello @shredo,
    Firstly, I would suggest reading this support article: https://support.mozilla.org/en-US/kb/cannot-send-messages
    If that doesn't help, try some of these things (not sorted in any particular order):
    *Test your connection in another network. There might just be some blocked ports in your router or conflict of some sort.
    * Test your smtp settings in another email client (to ensure that they actually work). If it doesn't work, there might be some missmatch with the settings (even though you have ensured that they match), or some restriction by your router or something.
    * Apparently, compacting your thunderbird folders might help with this issue (something to do with too many "deleted", that are still there) - http://kb.mozillazine.org/Thunderbird_:_Tips_:_Compacting_Folders
    I hope this helps.

  • Can't receive email - connection failure

    Since last nigh, the inbox in my Mail program (both computers) has had an alert icon. When activated, it says ... "There may be a problem with the mail server or network. Check the settings for account "XX" or try again.
    The server error encountered was: The connection to the server "mail.mac.com" on port 993 timed out."
    I can send email (apparently ... it goes) and I have access to the internet.
    This is happenig on both computers with .Mac account.
    Any ideas? Started last night. Mac Mini. MacOS 10.4.5 512 ram 1.5 GHz
    Thanks. RR

    I did exactly what SiJmons recommended above and my Mail program is working normally once again! My .mac remained but I had to re-establish my ISP earthlink accountas per sijmons. After that it works good on both my desktop and powerbook. The question is, what happened? Is there a virus out there or did Apple have a timed clitch in the Mail program. What would have caused both computers to fail receiving mail at the same time, oh, other others out there?
    Again, the fix:
    Trash the following file:
    your home directory / Library / Preferences / com.apple.mail.plist
    and empty the Trash
    Restart Mail
    Re-install your mail settings
    Thanks Sijmons! You are the Man today!
    iMac G4   Mac OS X (10.4.4)  

  • Palm Pre2 email connection

    Hi,
    I have a Palm Pre2.  It accesses the internet every 10 minutes.  I think this is to check for new email and/or updates.  It is costing me £1.50 a day.  How do I turn it off?  I have a wi-fi connection at home.  I have set the phone up to connect to that.  Can I switch off the auto-email-update facility without affecting the wi-fi connection on the phone?
    Thanks.
    Jimmy
    Post relates to: Pre 2 p102ueu (Unlocked EU)
    This question was solved.
    View Solution.

    Hi,
    The issue isn't resolved.  Please see previous topic.  I have switched wi-fi off as well now.  I will probably change my telephony provider to one that provides internet access.  If I do, should I leave the wi-fi switched off until it is required?
    Post relates to: Pre 2 p102ueu (Unlocked EU)

  • How to set my Firebox email connection? Must I use explorer?

    I AM A NEW CUSTOMER OF FIREBOX.
    I WANT HELP IN SETTING A FIREBOX HOME PAGE FOR LAMPMAN99 /
    My previous browser was Internet Explorer: I DO NOT WANT INTERNET EXPLORER,
    ... I DO WANT FIREBOX BROWSER WITH A FIREBOX EMAIL ADDRESS CONNECTION
    FOR [email protected]
    Do I have to add something to identify myself as [email protected] ??
    I am keeping my old email browser with my old (OTHER NAME ) email address.
    I do not know how to set my pc up for this new FIREBOX SYSTEM.
    HOW WILL I GET YOUR REPLY IF I CANNOT ACCESS MY FIREBOX EMAIL...
    my other email address is [email protected] [email protected]
    My FIREBOX email is: [email protected] ( I HOPE AND I THNK ???)

    Check hete
    *http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • [SOLVED] SSH, email - connection 'hangs'

    Hello,
    I have a problem with connections at work - it happens only at work, I tried on Arch and also Debian.
    I haven't noticed it to affect 'web browsing' - it affects for sure ssh (incl. git) and sending email mesages.
    What happens:
    About 3/4 of times I try to send an email (google account from thunderbird), or log in to one of our servers with ssh (or pull/push some code from/to github) the connection 'hangs' and nothing happens. If I try ^C and 'redo' few times I finally manage to log in.
    Log from ssh (unsuccessfull connection):
    ssh bb5 -vvvv
    OpenSSH_5.9p1, OpenSSL 1.0.0g 18 Jan 2012
    debug1: Reading configuration data /home/kaczor/.ssh/config
    debug1: /home/kaczor/.ssh/config line 18: Applying options for bb5
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug2: ssh_connect: needpriv 0
    debug1: Connecting to XXX.XXX.XXX.XXX [XXX.XXX.XXX.XXX] port 22.
    debug1: Connection established.
    debug3: Incorrect RSA1 identifier
    debug3: Could not load "/home/kaczor/.ssh/id_rsa" as a RSA1 public key
    debug1: identity file /home/kaczor/.ssh/id_rsa type 1
    debug1: identity file /home/kaczor/.ssh/id_rsa-cert type -1
    debug1: identity file /home/kaczor/.ssh/id_dsa type -1
    debug1: identity file /home/kaczor/.ssh/id_dsa-cert type -1
    debug1: identity file /home/kaczor/.ssh/id_ecdsa type -1
    debug1: identity file /home/kaczor/.ssh/id_ecdsa-cert type -1
    [-- and I can wait for ages on this --]
    If the login is successfull the next lines are:
    debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze1
    debug1: match: OpenSSH_5.5p1 Debian-6+squeeze1 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_5.9
    debug2: fd 3 setting O_NONBLOCK
    My /etc/ssh/ssh_config on Arch is default (everything commented out)
    ~/.ssh/config has only few Host, User, entries
    On Debian:
    /etc/ssh/ssh_config
    Host *
    SendEnv LANG LC_*
    HashKnownHosts yes
    GSSAPIAuthentication yes
    GSSAPIDelegateCredentials no
    Trying to ssh to server's IP doesn't change anything.
    Any ideas how could I track where lies the problem? Or maybe I could at least make it 'retry' automatically?
    Edit:
    After setting timeout in ssh_config I get
    Connection timed out during banner exchange
    at the end of unsuccessfull connection.
    Last edited by kaczor1984 (2012-04-24 15:15:17)

    firecat53 wrote:
    Try downgrading openssl and openssh to the previous versions. I had issues similiar (but not exactly) to this. I think try openssl-1.0.0.h and openssh-5.9p1-5
    Scott
    On Debian the openssl is 0.9.8g-15 and openssh is 5.1p1-5
    Gcool wrote:Try connecting with the "-o ConnectTimeout=60" parameter....
    I've set it already in ssh_config file (see my edit). Is there any way to make ssh 'retry' few times because now it gives up after first failure.
    I've set   ConnectionAttempts 5 but i'm not sure if it works - I'll have to give it another try on tuesday.
    mr.MikyMaus wrote:Can it be that your employer does not like encrypted traffic in his network? I could imagine an IPS system trying to decipher the connection... Try moving the server-side ssl service to a non-standard port if you can...
    It is possible - however I don't know exactly how is the network 'distributed'. Maybe I'll try to change it at least at one server and give it a try.
    Anyway - what about emails for example - this uses port 25 (smtp on gmail) and is experiencing the same problems (message sending lasts until timeout 8 out of 10 times).
    I don't know too much about networks - maybe there is some kind of service which doesn't work properly in my network at the office. Any clues what could it be?
    Most important for me is to make 'git pull' work - because it's executed automatically on those Debian boxes and if it fails they are not updated.
    So solution like 'make it retry 10 times per 5 seconds' will do the job for 90% cases I think.

  • AOL email connectivity issue - Sends but does not receive

    I have 2 AOL email accounts on my Droid X.  Up until Thursday, I had no issue receiving emails to both addresses.  Suddenly on the Thursday my default account kept indicating connectivity issues with the account.  The other AOL account worked perfectly. 
    I can still send from default AOL account and they are received, but I am not able to receive any email into this account.  I tried to forwarding these email addresses to my gmail account.  But gmail is not receiving emails from either account.
    Any suggestions?

    SHAC wrote:
    This is amazing!
    i didn't know people still used AOL mail LOL 
    Time Warner took over AOL and allowed customers to retain their AOL accounts to minimie the headache of converting everyone...  
    Now to the ones having issues, have you tried contacting AOL and make sure they are not transferring or updating a server, because usually when they do this it can effect some accounts but not other just as you have discribed. They may require a new port entered or even pop, imap or smtp access information.  Drop them a call and verify incoming and outgoing addresses.

  • Email - Connection to server failed

    Hey,
    I've been receiving emails (Yahoo) on my iPhone until last night. A message "connection to the server failed" pops up whenever I attempt to check emails. I've tried the following to fix this:
    1) Rebooted iPhone
    2) retyped password into iPhone
    3) Deleted account from iPhone, and added it again
    4) Updated password from a laptop, then onto the iPhone
    Nothing seems to work. Thanks for the help in advance.

    Posted below are some articles that may assist.
    You want to always ensure your exchange server has the latest software updates from Microsoft. You also want to ensure that all proper permissions and granted accesses are setup properly as some updates may disable features that were turned on my default.
    iPhone 2.0 software: Troubleshooting iPhone or iPod touch Exchange ActiveSync "Push" issues
    http://support.apple.com/kb/TS1868
    iPod touch, original iPhone, or iPhone 3G: Microsoft Exchange data not syncing to the device after configuring Microsoft Exchange account
    http://support.apple.com/kb/TS1693
    Setting up a corporate email server for iPhone and iPod touch
    http://support.apple.com/kb/HT1421
    iPhone 2.1 software: Exchange ActiveSync Account Quick Setup Guide
    http://support.apple.com/kb/HT2480
    iPhone Enterprise Support Page
    http://www.apple.com/support/iphone/enterprise/
    http://www.apple.com/iphone/enterprise/integration.html

  • HT201320 Problem with email connection

    Having trouble getting connected for sending emails. Service provider is ntlworld.com (part of Virgin).
    Followed on-line instructions and it worked OK for incoming, once I’d worked out the right password to use, which is same as for the Virgin webmail site. (I first tried an earlier password from when email was set up with ntl about 10 years ago, and I don’t remember changing it to the Virgin webmail one).
    I’ve tried both and various others, including my Apple password, but no joy.
    Please help!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for