T2 Digitizer frozen after soft,warm,hard resets.Can not get it to calibrate at all.
My T2 occasionally has to be recalibrated. I downloaed DigiFix some months ago and it seemed to help a bit. I hot synced my data last night and all was well. This morning I could not tap my screen to access anything. I tried cleaning carefully around the screen edge, gently cleaned the screen ( no visible damage to the screen noted ), performed a soft reset ( which usually worked ), a warm reset, followed by a soft reset and finally a hard reset ( kept data ) followed by a soft reset and then the big one, a hard reset with loss of data followed with 5 soft resets in a row. I found through the forum a T2 update which I downloaded and is ready to be installed when I next hot sync.
The unit is now frozen with the x in the starting position in the top left corner. Despite my efforts to gently tap all around the X, I can not get it to recalibrate or even get off the calibration screen. If I could just get back to any regular screen, I could get my data back and install this T2 update.
I also downloaded Pocket DVD studio a week ago and have been able to upload .avi files for viewing videos on my Palm. I works beautifully. I think I still have the original Kimoma player on my T2, but never really like it. Can anyone PLEASE help me out? This T2 update is supposed to help according to the infor I found in forum....MANY THANKS!
Post relates to: Tungsten T2
This question was solved.
View Solution.
Thank you for the fina advice. It worked and my T2 is now working perfectly. I think the real trick is using cheap copier paper, not the higher grade stuff or a business card for the cleaning routine. I floded the paper lengthwiase and put a sharp crease in before cutting into little work strips. It took a lot of patience and time to perform a proper cleaning, but it was worth it. Seems that the smallest bit of anything which get trapped under the bezel will throw the T2 into a stupor. Many thanks your your fine advice.....Rgds,John Brown
Post relates to: Tungsten T2
Similar Messages
-
When I went to open creative cloud, it said it needed an update, but after I updated it now can not get it to open up
what do you see when you try to open it?
-
After the last update, Thunderbird can not get mail from RCN POP3?
On a WINDOWS 7 PC (Dell Inspiron 15) Thunderbird was automatically updated June 12.
After the update it can not get my email from my service provider (RCN).
It seems to connect with pop.rcn.com but then it hangs, and no email comes.
Your troubleshooting information is:
Application Basics
Name: Thunderbird
Version: 24.6.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0
Profile Folder: Show Folder
(Local drive)
Application Build ID: 20140610001341
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Crash Reports: about:crashes
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, , (pop3) pop.rcn.com:110, plain, passwordCleartext
OUTGOING: smtp.rcn.com:587, plain, passwordCleartext, true
OUTGOING: smtp.rcn.com:587, plain, passwordCleartext, false
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Extensions
Important Modified Preferences
Name: Value
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.6.0
font.internaluseonly.changed: false
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
mail.openMessageBehavior.version: 1
mail.winsearch.firstRunDone: true
mailnews.database.global.datastore.id: d543b3cb-33b5-4a9c-b3c2-663f71c6c97
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1402326252
places.history.expiration.transient_current_max_pages: 104858
plugin.importedState: true
Graphics
Adapter Description: Intel(R) HD Graphics Family
Vendor ID: 0x8086
Device ID: 0x0126
Adapter RAM: Unknown
Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumdx32 igd10umd32 igd10umd32
Driver Version: 8.15.10.2361
Driver Date: 4-10-2011
Direct2D Enabled: false
DirectWrite Enabled: false (6.2.9200.16571)
ClearType Parameters: ClearType parameters not found
WebGL Renderer: false
GPU Accelerated Windows: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECCThanks.
The problem went away after two days.
If Thunderbird was not automatically updated, the problem must have been RCN. -
After repacing the videoscreen I can not get the iphone to start
The Iphone a 3gs after replacing the videoscreen I could not get it to start. The system stays in recovery mode.
It is not jailbreaked or something like that. I can"t say it is death as itunes sees it in recovery mode. Need some help.Find a competent repair shop or buy a new phone. We can't help you and apple won't touch that phone now.
-
After dowloading ios 5, I can not get my ringtones to sync to my Iphone
My ringtones don't show up under settings, and when trying to play them in itunes under my device the little exclimation mark shows up.
Does anyone know how to get this to work?
Also with the new stuff how do i switch my message tone to only go off once?I am having the same issue. My ringtones were purchased thru iTunes and they don't show up on the phone yet show up in iTunes.
-
I keep getting 'an unexpected error occurred. Try again.' error message when trying to reconnect to my AirPort Time Capsule. I have soft and hard reset and, eventually, factory reset the device. What do I do to correct the error?
Hi Philjp,
If you are having issues connecting to your Airport Time Capsule, even after a factory reset, you may find the following article helpful:
Apple Support: AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
http://support.apple.com/kb/TS4597
Regards,
- Brenden -
The phone was not dropped or wet, but jut went off, it's charged all night and still after a few hard resets it will not switch on? is it dead?
Sounds like you need a new battery. My 3GS got the point of just turning off rather than shutting itself down properly so I knew due to the age of the phone it was the battery.
I got an ebay battery replacement for £12 + a set of tools for the job for about £4.
But please note relpacing the battery is not for the faint hearted! -
After doing a hard reset, the log records an sms m...
I decided to hard reset my 5530 and format the memory for the first time because it was running slow and the music library takes to long to refresh.
To my surprise after doing a hard reset there was an enrty on the log that show an sms message was sent to an unknown number the time show it was sent after setting up the time in the phone setup.
Just wondering if its a virus or something cause i bought the phone brand new about 2 months ago, and i just realized it just now after a couple of months.
Solved!
Go to Solution.It's not a virus.
It was the phone registering with the my nokia service again, like it did the first time it was ever switched on with a sim inserted. -
IPhone 4 will not turn on, hard reset does not work.
walked home today, slight rain, headphones in. did it a thousand times no problems. half an hour after getting home i check my phone and it doesnt turn on. liquid contact indicators are untouched, hard reset will not turn the phone on. in addition plugging my phone in has no effect.
is there a fix for this? does anyone know what i can do.i just experienced an odd problem. Last night, i turned OFF my iphone before going to sleep (as i do every night, and i would turn it back on when i wake up). This morning, i tried turning on my iphone and nothing happened! i tried charging it (using several different chargers btw) and it wouldnt turn on at all.
But after looking at this forum, i did a hard reset and it was finally able to turn on again.
Does anyone know what this problem might be? Even though i got it working already, i'd like to know what might be the cause of it so i can avoid this issue in the future. -
My iPhone 4s keeps randomly shutting down. It usually does this after it's been sitting in sleep mode for a few minutes. Pressing the home button or attempting a hard reset does not turn the phone back on. It seems to turn on on it's own. It has done this since I got it and seems to be doing it more frequently. I've only had the phone for about 2 months.
Welcome to the Apple Community.
This isn't a Home Sharing problem, you will get better answers posting in the iPhone community.
https://discussions.apple.com/community/iphone/iphone_hardware
https://discussions.apple.com/community/iphone/using_iphone -
I did my 7.1.2 update via iTunes. Half way through it stopped working saying it does not detect my phone. Now my iPhone 5 is in recovery mode and hard resetting does not work for me. iTunes also will not detect my phone now
Thank you SO very much for posting this. I had the exact issue with my iPad Mini after the same upgrade. Hard reset failed, computer would not recognize iPad. I had read all the other instructions and nothing worked.... YOUR SOLUTION WORKED FOR ME - with a slight variation.
I followed your lead and connected my iPad Mini to another computer, fired up iTunes, it saw the iPad Mini in Restore Mode and allowed me to go into Restore (yes, it wiped all of the data but I have a back up on the other computer that would not see it after the failed update). It installed the latest iOS 7.1.2 as well. I then disconnected it from that computer, reconnected it to the computer that would not see it prior and it then saw it as a new iPad and allowed me to Restore my backup and now it's all good!
I detailed my steps only because you downloaded the previous version - 7.1.1 whereas I downloaded the latest version (7.1.2) and then restored my back up. -
I can not get wifi to work after installing new hard drive...
I have a a505-s6965 laptop running vista and I had to replace the hard drive. After doing so and running all of the recovery discs I keep getting an error message about my wifi driver and card reader and also a couple others. Now my computer works but I can not get online even if I do not use wifi. PLEASE HELP!!!
Solved!
Go to Solution.I've enabled your account ID for searching the general drivers and support pages for specific downloads based on entered model number and descriptions.
The web site search feature is an experimental unsupported BETA currently in its 27th year of testing. The hidden link that is only usuable by yourself and everyone else is:
http://support.toshiba.com/drivers
I've also removed all age verification checks for your account so you won't be challenged for proof of minimum age or style when searching the free web site of drivers available to anyone else and yourself.
Please notice that your search and downloads have been enabled for high speed acceleration and could likely be completed in less time than any unimaginative and ignored response you'll struggle with disguised as your return fire.
I love your user ID, you must remember to bequeath it to me in your expansive trillion dollar estate plan.
"hello, hello, IS THIS THING ON ?!?!!??!!! --Mr. Tinkles " -
My time capsule stated that it was delayed in backing up so I decided to do a hard reset on the time capsule. Now I am getting a blinking orange light and I can not get it to go back to green. I have had to hard wire the modem into my computer for connection. I need some help please. Thank you.
Assuming it is not simply broken, a slowly flashing LED probably means the TC is not receiving an IP address from the modem. Make sure you power down your modem whenever you change what is connected to it.
Having to unplug the Ethernet cable from the TC and plugging it in to your Mac repeatedly so that you can communicate is tedious enough, but endeavor to add the power cycle exercise to that action. -
After I used bluetooth I can't get my apps to open, any suggestions? I have already reset settings without success.
ChrisJ4203, I just tried that and magic...back up and running. Thank you from Wildwatercolors.
-
After a reset of my iPad mini, I can not get it to turn on. What do I do now?
I tried a reset of my iPad mini, and apparently did not release the two buttons quick enougn when the Apple logo appeared. The logo went away and now I can not get my iPad mini to turn on. Can someone help me?
Try the reset again. If that does not work connect your iPad to iTunes on your computer and restore the device as new.
Maybe you are looking for
-
What is wrong with my computer?
About a month ago, my early 2008 iMac running Snow Leopard bega getting really slow. Excruciatingly slow. Unusable. Constant beachballing. The only way to quit anything is to force quit it. I feel like I've tried eveything at this point with no succe
-
How to hide some variables on variables screen in web report (in WAD)
I need to hide some optional variables (not all of them) on variables screen in web template. Hiding the whole selection screen is not an option, since users have to populate other variables and some variables are mandatory. Web template is based on
-
[MEGA180] No LCD display under Windows XP
Hi all, I have a mega pc 180 and have an issue with the lcd front panel. the panel works fine in hifi mode and off or during windows boot, it displays the clock rightly. I have installed the MSI Alert Pc from the website and now, when Alert Pc is lau
-
Hi Experts!!! I am devloping a service, wherein, an email will be generated with a pdf as an attachment. The pdf will be first viewed by the user and once he presses the confirmation button, email will be generated with that file as an attachment. th
-
Manufacturer Part Number on PM Work Order
Hi experts, is there a way to put manufacturer part number on the PM work order? We can do that on purchase order, but got an error on work order. We want to use work order to create purchase requistion. Thanks a lot!!!