T2 ULTRA DUAL WALKMEN ISSUES

HI ALL,
   I bought sony ultra t2 dual one month back, frequently am getting one prob walkmen, that is " when  walkmen is running some times suddenly sound was stoping but walkmen is running , in that time i tried to stop that song after few minits only it will stop. some times mobile also very slow performence." . this problem is irretating me please help me......... with right solution.....................
 thank u ..................

Try settings-apps-all-walkman,clear data.Restart.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

  • Help Xperia T2 Ultra / T2 Ultra Dual Lollipop issues and feedback

    hi good afternoon my phone is an ultra T2 D5322 model after download android 5.0.2 19.3.A.0.472,19.3.A.0.470 my phone stopped working the speakers could barely hear someone by headphones.
    I installed the android 4.4.3 19.1.C.0.56 but alas I can not enable USB debugging not have the option to help phone.
    someone could help me because I like to get the newest version of android..

    Hi all
    its been 18hrs i have been using the update and have come across below issues.
    1. creepy speaker output(feels very bad sound output)
    2. sudden freezes sometimes
    3. camera gone bad i think at the front one (the amount of noise is worse)
    4. settings won't open many times while trying to access from notification notification dragged down
    5. had to update latest album manually
    will update further day by day if come across
    also would request you all please confirm above bug if you face
    thanks

  • Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.

    Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.Extreme and Irritating hang problem occurs after I have updated T2 Ultra Dual Phone with Lollipop Version.Kindly assist and also if Boot the device will it be solved via flashboot and unlock the bootloader?? Waiting for revert.Kindly revert.

    Flashmode or Fastboot mode is only for those that wish to root and install a custom Rom or firmware, if that's what you want to do then head over to XDA - Howwever have you tried a system repair as this usualy fixes issues after an upgrade.
    Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • Micro SDXC 64 GB on Xperia T2 Ultra Dual

    Hello, Just got myself a Sandisk 32 GB Xtreme MicroSDHC..running about a week from now on my Xperia T2 ulta Dual without hiccups I wonder if 64GB SDXC is supported by this phone?Has anyone outhere try it out?I mean plugging it in and the phone recognize it also capable of READ/WRITE...As per Sandisk Website 64 SDXC Xtreme is supported :    Do we have to upgrade to Xtreme PLUS or XTREME Pro if we want to have 1080p HD Video READ/WRITE capability with this phone?Or maybe XTREME is enough? I'm considering to buy a 64 Gb one for my phone Thanks and Best Regards, Cak Noor 

    cak_noor wrote:
    Hello... Just had a chance to test it with 64 GB SDXC..this's my screenshot of STORAGE menu in setting :  one more question : anyone out there already tried 128 GB? Please share if you dont mind Cak NoorI went to the Sony Store yesterday to by a Sony 64 GB card for my T2 Ultra Dual - after seeing your post. But he said if I added a 64 GB card in my phone, the phone will slow down - he said all functionality will become slow. So I came back with a 32 GB card.  Cak_Noor, has your T2 Ultra Dual become slow after adding the 64 GB card ?

  • How to turn off Safe Mode in My Xperia T2 Ultra Dual

    i cant disable the safe mode in my xperia T2 ultra dual, please help

    Or simply try this button:
    http://userguide.sonymobile.com/referrer.php?region=global-en&product=xperia-t2-ultra#!Resetting-your-device.html

  • New problem with my Sony xperia t2 ultra dual

    I have recently discovered this new problem with my Sony xperia t2 ultra dual.it displays" sorry but xperia home is not wotking". And if iclick on OK it displays the same message again.
    Can anyone help me solve this problem?
    Please reply quickly what to do?

     Repair the phone with PCC PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355 

  • Huge Network and Voice quality issues with Xperia T2 Ultra Dual

    Same problem here after one month.
    Voice cracking can't hear other party while having full signal strength.

    Hi @Mayur9 Go to Call settings -> General -> and disable the "Slow talk option" if it is enabled. If the issue persists, boot your device in Safe mode to check what happens: http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008 Also I suggest you to first run a backup of the device information like this: http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253 Try performing a system repair using PC Companion: http://support.sonymobile.com/gb/tools/pc-companion/ This will factory reset your phone and erase all data. You might need tocharge your device for about 1-2 hours before so the device has at least 80% battery. Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device). Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process. If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP. I hope can be useful. I'm at disposal for any question. Best Regards,

  • Xperia Z3 Dual - Battery Issue

    Dears,
    Kindly be informed that, after purchasing the new Smart Phone Xperia Z3 Dual in KSA, facing issue with Battery ! its not working for 2 days (Maximum 1 Day) - even after activating STAMINA feature with Extended Standby still same issue.
    Also i have noticed that, battery drain even without doing any activities (Data "LTE/3G") or bluetooth, etc.....). !!
    Is there any thing need to do from my side ? Kindly have a look to the attached snapshots.

    i think yes if you using ultra stamina mode it will be.i have only xperia z2 but if i active stamina mode there we can see the popup massege with the forking fuction.but i can use wifi bluetooth also so try it ok after active ultra stamina mode try to on wifi bluetooth and try to use internet
    Do not forget to give kudosand to select the correct answer 

  • 975x Platinum PowerUp Dual Boot Issue

    Hello -
    I have a 975x Plat. PowerUp and dual boot Linux and Windows XP. This process works fine on BIOS 7.1, but fails to boot the Windows disk on BIOS 7.4 and newer. The disk still works, it just can't be started by the Linux bootloader (grub).
    I spent a lot of time working on this as a grub issue, but in the end the only thing that affects the problem is revision of the BIOS I am using. (e.g., flash 7.4, Windows does not boot, reboot and flash 7.1, Windows boots).
    I also get an issue where I cannot eject the CD drive on warm boot under the same conditions (like a BIOS boot disc, or a Windows boot disc). Works fine on 7.1 not on 7.4 or newer.
    I have all 4 ports on the ICH7 controller used for hard drives, and the JMicron controller used for a SATA DVD drive. The issue occurs in IDE or AHCI mode (currently using AHCI mode).
    Are these known problems? Are there known fixes? I would like to use a newer BIOS because I have an MS USB keyboard that does not work in DOS mode with BIOS < 7.4 (need keyboard to select OS at boot time).
    Thanks,
    Chris

      Not sure if this will help: BIOS 7.61 BETA - Flash at your own risk - http://www.msi-forum.de/thread.php?threadid=32518&threadview=1&hilight=&hilightuser=0#post264463

  • Server 2012 Dual Monitor Issue - Can't Get it to work properly.

    I have a HP Proliant ML310e that runs Server 2012 R2. It came with an on-board VGA graphics adapter, that was using a Microsoft Basic Display Adapter driver and working fine.
    Needing to run dual monitors, I contacted HP and purchased a Nvida K2000 PCIE graphics card. I installed it using their latest drivers and rebooted, making sure that the new PCIE card was enabled in the BIOS.
    While booting, the server actually now displayed on the new 'second' monitor connected to the newly installed Nvida card. When I actually logged in and went into the display properties, it was only detecting the new display - I couldn't even force detect
    the original display.
    Also, when I go into device Manger, it now only shows the Nvidia graphics adapter - no longer shows that the Microsoft Basic Display Adapter is present.
    Any advice on how to get dual monitors to work on Server 2012. I did try the Windows/P Projector display, but that did nothing.
    Thanks,

    Hi,
    You should check your BIOS settings - some motherboard will disable onboard display card once a PCI(E) card is plugged in. This is a hardware settings issue. If  HP support is available, ask them for detailed configuration steps. 
    If you have any feedback on our support, please send to [email protected]

  • Xfce4 and dual screen issues

    I have setup dual screen in xfce4, i have added
    xrandr --output VGA --left-of LVDS
    to xfce4 startup apps. But the issue is that both screen defaults to 1024x768 and if it change the resolution to the correct one my laptop screen turn black. This is some what the similar kind i issue i face in kdemod4 but gnome work ok with with the above command.

    What video card?
    What drivers?

  • Xperia T2 ultra dual touch screen is not working

    Hello I am  using Xperia T2 ultra from 31st March 2014. From last two to three days the screen is starting behave adhoc. without even touching the screen it was taking commands. Today moring the screen is not at all acceptign any inputs. I have tried restart removing sim and memory cord both. Still its not working. Please advise me what to do? Regards, VSK

    i also faced the same issue, the touch screen is not responding at all.....and whenever i open the camera the msg pops up "unknown error" or "Error: camera not available" phone restart itself, does anybody know how to fix all this errors???

  • Nokia 301 Dual SIM - Issues opening message folder...

    Nokia as a company should be ashamed of manufacturing a phone like this(irrespective of if this is a issue with software or handset or both). I bought this assuming Nokia is a robust stable phone (Already have S3, but need a dual sim compact phone).
    But lately i have been getting "Message storage memory not ready" when i try to open inbox or conversation folder (under 'Messages' menu). 
    Tried Hard Reset / Soft Reset and nothing worked. Restared the mobile and this did not work too (SIM Out, IN and Restart did work either) Couple of times after reset it worked fine. But after few minutes, it again showed up the same error message.
    This is no abuse, but for Rs. 5700 that i paid this problem is bull **bleep**ting. And i would not expect this kind of useless product from Nokia. 
    And the hand set (Hands Free) that came with this phone does not stay in my ears even for a minute, it keeps falling. 
    Be ashamed Nokia.
    Phone is still in warranty, not sure what i can do with the warranty as iam out of the country now.
    IAM NEVER EVER BUYING A NOKIA AGAIN.
    Any solution to this issue will be greatly appreciated.
    Thanks guys

    TrueLies1,
    Warranty covers both parts and labour services that will be rendered to the phone. The device might get repaired or replaced with a new one depending on the evaluation made by the Care Point specialist.
    You may try to send the the phone along with its box to the Care Point for warranty validation purposes. You may also locate the nearest Nokia Care Point by accessing this page at nokia.ly/1oj1joQ.
    Good luck

  • Dual screen issue

    Hi Team,
    I have dual screens. A Dell P190S (1280x1024) and a HP ZR22w (1920x1080). I have also an Intel® Q45 and Q43 Express Chipsets in my desktop PC.
    When I use PS, sometimes the circle which indicates the size of the draw tool or the earse tool is freezing on my screens. Even if I close PS, it is still there or even when I lock my computer is still there.
    Unfortunately I haven't found any solution for this issue.
    Is it because of the different screen resolution?
    Message was edited by: gaborf

    OK, so we are talking about the same ball park circumstances from the historical problems with brush cursors.  I think Compaq computers are rather arbitary regards hardware and drivers, and don't usually allow much in the way of upgrading, so you could be stuck with what you have got.  All I can suggest it homing in on those paramiters with Google
    Photoshop CS4 cursor issue or problem
    sort of thing.
    This is the sort of hit you'll find
    http://www.earthboundlight.com/phototips/photoshop-cursor-problems.html
    You'll hopefully find something that rings a bell or matches your circumstances closely.  Good luck.
    [EDIT]  I wonder if your hardware will support Windows 7?  It has excellent dual screen support.  That irrifutable law of presentations, that 'when a Powerpoint and projector were involved, there will _always_ be a problem' has finally been broken.  If your employer was daft enough to invest in Compaq hardware, I doubt you'll get any help from them.

  • Inconsistent grub error 17, dual booting issues

    Hello,
    I've recently installed Arch as a second OS on my computer, but I'm having a bit of trouble when it comes to booting it. I'm a bit new to Linux in general, but I've tried to research the problem, and seem to have run into a wall. Any comments, insight, suggestions would be greatly appreciated. Preemptive apologies for being windy, I'm trying to give as much relevant info as possible here
    ****************Here are the details:******************
    -1st hard drive (sda): Windows 7
    -2nd hard drive (sdb): Arch
    Partitioning scheme:
    sdb1 = boot, about 100Mb, ext2
    sdb2 = swap, ~2gig
    sdb3 = root, ~20gig, ext3
    sdb4 = home, the rest (HD is 500gb total), ext3
    -grub is installed on the MBR of sdb
    -windows has no problems booting independently (when i disconnect my second hard drive), so sda hasn't been touched at all
    in grub's menu.lst:
    arch has root set to (hd1,0)
    windows 7 has rootnoverify set to (hd0,0), with chainloader +1 after.
    **************The issue:********************
    when choosing to boot arch from grub, (this is booting off of the second hard drive), i get an error 17, saying the filesystem is unrecognized and the partition type is 0x7.
    if i then enter into the command line mode for grub, and try
    find /grub/stage1
    it spits out (hd0,0), which is incorrect. it should be (hd1,0) since my boot partition is the first partition on the second hard drive, and (hd0,0) is an entirely different hard drive with nothing but windows on it.
    An interesting complication:
    If I boot the USB iso image of arch I used to originally install it, and I highlight the option "boot existing OS", press tab to change hd0 0 to hd1 0, it loads up Grub, and from there on Grub boots perfectly fine to Arch - implying that at the very least Arch installed on the hard drive properly. Also, Grub run in this fashion seems to realize that (hd1,0) is ext2.
    After booting arch as in the previous paragraph^ (note, this is arch as installed on the hard drive, not the liveCD version), i run:
    grub
    grub> find /grub/stage1
    and it replies that stage1 is in hd(1,0), which is where it should be.
    Googling suggests my partitions are somehow messed up, but I'm not completely sure of that. Booting from the USB image and running
    fdisk -l
    seems to give the right partition order and sizes.
    However, there could be a problem stemming from how I partitioned the second hard drive in the first place: it's an Advanced Format drive, and using Western Digital's guidelines - http://wdc.custhelp.com/app/answers/detail/a_id/5655 - i ran:
    parted -a optimal /dev/sdb
    and created my partitions, then used the Arch installer to establish their file systems and do the rest.
    I don't have any concrete ideas about what's going on, except that Grub is somehow having trouble mounting/recognizing the file system when I try to run it from the MBR directly.
    Once again, sorry for such a long post, and any help at all is greatly appreciated.

    Ok, so I've tried to reconfigure my grub/menu.lst as described in https://wiki.archlinux.org/index.php/Pe … t_managers .
    When I try to boot after that, it claims that the device /dev/disk/by-uuid/*the uuid i got for my boot partition* cannot be found.
    This next paragraph might be a bit of a facepalm moment; in retrospect, it seems like it should be obvious that this would happen (like lifeafter2am is saying, my drives are getting switched at boot up):
    After booting up grub in a bunch of different configurations, I've managed to determine that what my computer does is this:
    - In the bios, I changed the boot order to be USB -> 2nd hard drive (the one with arch on it) -> first hard drive (since I use a USB for a liveCD, and the 2nd hard drive's MBR has grub on it, which i want to use to dual boot both arch and windows, windows being on the first hard drive).
    So every time I insert the usb, it changes what grub perceives to be hd0 and hd1. When I insert the usb, the usb becomes hd0, and the other drives are renumbered. When I try to boot without the USB, having the BIOS boot from my second hard drive makes the second hard drive become hd0.
    What with ^ going on, I simply went in to the grub/menu.lst and changed arch's (hd1,0) to (hd0,0), and now it recognizes that (hd0,0) is indeed an ext2 fs, partition type 0x83, etc.
    The problem now is: no matter what I try to set the root in menu.lst to be, whether it's sdb1, sda1, some uuid label, grub starts booting and then says error: unable to mount the real root device, and dumps me into a shell with a good luck message.
    Is there a way to figure out what i should set grub's root in menu.lst to be, from the arch iso on my USB, keeping in mind the fact that inserting the USB renumbers the hard drives?
    I don't wanna make the analogy to quantum mechanics, but this almost seems like an observer disturbing the results type of thing >_<
    Last edited by sergs (2012-02-12 01:18:54)

Maybe you are looking for